Infrared reflection-absorption spectroscopy and polarization-modulated infrared reflection-absorption spectroscopy studies of the aequorin langmuir monolayer

The Langmuir monolayer of aequorin and apoaequorin was studied by infrared reflection-absorption spectroscopy (IRRAS) and polarization-modulated IRRAS techniques. The alpha-helices in the aequorin Langmuir monolayer were parallel to the air-water interface at zero surface pressure. When the surface pressure increased to 15 mN.(m-1), the alpha-helices became tilted and the turns became parallel to the air-water interface. As for apoaequorin, the alpha-helices were also parallel to the air-water interface at 0 mN.m(-1). However, the alpha-helix became tilted and the turns became parallel to the air-water interface quickly at 5 mN.m(-1). With further compression of the apoaequorin Langmuir monolayer, the orientation remained the same. The different behaviors of aequorin and apoaequorin at the air-water interface were explained by the fact that aequorin formed dimers at the air-water interface but apoaequorin was a monomer. It is more difficult for a dimer to be tilted by the compression of the Langmuir monolayer.     

Infrared reflection-absorption spectroscopy and polarization-modulated infrared reflection-absorption spectroscopy studies of the organophosphorus acid anhydrolase langmuir monolayer

The secondary structure of the organophosphorus acid anhydrolase (OPAA) Langmuir monolayer in the absence and presence of diisopropylfluorophosphate (DFP) in the subphase was studied by infrared reflection-absorption spectroscopy (IRRAS) and polarization-modulated IRRAS (PM-IRRAS). The results of both the IRRAS and the PM-IRRAS indicated that the alpha-helix and the beta-sheet conformations in OPAA were parallel to the air-water interface at a surface pressure of 0 mN.m-1 in the absence of DFP in the subphase. When the surface pressure increased, the alpha-helix and the beta-sheet conformations became tilted. When DFP was added to the subphase at a concentration of 1.1 x 10(-5) M, the alpha-helix conformation of OPAA was still parallel to the air-water interface, whereas the beta-sheet conformation was perpendicular at 0 mN.m-1. The orientations of both the alpha-helix and the beta-sheet conformations did not change with the increase of surface pressure. The shape of OPAA molecules is supposed to be elliptic, and the long axis of OPAA was parallel to the air-water interface in the absence of DFP in the subphase, whereas the long axis became perpendicular in the presence of DFP. This result explains the decrease of the limiting molecular area of the OPAA Langmuir monolayer when DFP was dissolved in the subphase.     

Study of molecular aggregation of artificial amyloid in a langmuir monolayer by infrared spectroscopy

A synthesized peptidolipid (C18IIGLM-NH2) comprised of a single C18-saturated hydrocarbon chain connected to the amino acid sequence IIGLM terminated with the NH2 group was spread on water, which formed a stable Langmuir monolayer. The Langmuir and Langmuir-Blodgett (LB) films have been characterized by measurements of surface pressure-area (pi-A) and surface potential-area (DeltaV-A) isotherms and infrared multiple-angle incidence resolution spectrometry (MAIRS). The Langmuir monolayer had a significantly larger limiting molecular area than that of a similar molecule of C18IIGLM-OH, which was reported in our previous study. The surface dipole moment analysis coupled with the pi-A isotherm suggested that the C18IIGLM-NH2 monolayer was extraordinarily stiff and the fundamental structure of the monolayer was brought about before the monolayer compression. The infrared MAIRS analysis of the C18IIGLM-NH2 LB film revealed that the backbone structure of the monolayer was the 'antiparallel' beta sheet aligned parallel to the substrate. Since the C18IIGLM-OH LB film was made of 'parallel' beta sheet with a random orientation, it has been found that the present C18IIGLM-NH2 Langmuir monolayer has a largely different monolayer structure, although the chemical structures are slightly different from each other by the terminal group only.     

Surface pressure‐area curves compression isotherm of sericin Langmuir monolayer

The Langmuir monolayer of sericin protein was studied by means of surface pressure (π)—molecular area (A) isotherms at different pH subphase. The monolayer of sericin exhibits typical phase transition phenomena at pH 2, pH 4.8, pH 7 and pH 11, respectively, including from gas state to gas‐liquid state and finally to condensed solid state. However, the monolayer of sericin on pH 11 subphase appears to be solid state. Copyright © 2007 John Wiley & Sons, Ltd.     

Fibril-like aggregate formation of peptide carboxylate Langmuir films analyzed by surface pressure, surface dipole moment, and infrared spectroscopy

The fibril formation process of a synthetic peptidolipid compound in a Langmuir monolayer at the air-water interface has been analyzed by surface pressure and surface dipole moment-area isotherms, followed by infrared spectral analysis of related Langmuir-Blodgett films. Thus far, the analysis of randomly oriented molecular assemblies has been a difficult matter, especially for spectroscopic measurements. In the present study, the Langmuir film isotherms were discussed in detail, and they have readily been correlated to the infrared spectra. For the spectral analysis, infrared multiple-angle incidence resolution spectroscopy (MAIRS) was employed, which was compared to the results by conventional techniques. Since the peptide assemblies greatly responded to a metal surface, the reflection-absorption technique was not useful for our analysis. Instead, MAIRS was found to be powerful to reveal the anisotropic structure of the Langmuir films, and a disordered molecular architecture has been revealed via the molecular orientation analysis. As a result, the fibril-like aggregation formation process during the monolayer compression, which was suggested by previous topographical study, has been found to be due to the stiff domain formation in the Langmuir films.     

Study of the aggregation of human insulin Langmuir monolayer

The human insulin (HI) Langmuir monolayer at the air-water interface was systematically investigated in the presence and absence of Zn(II) ions in the subphase. HI samples were dissolved in acidic (pH 2) and basic (pH 9) aqueous solutions and then spread at the air-water interface. Spectroscopic data of aqueous solutions of HI show a difference in HI conformation at different pH values. Moreover, the dynamics of the insulin protein showed a dependence on the concentration of Zn(II) ions. In the absence of Zn(II) ions in the subphase, the acidic and basic solutions showed similar behavior at the air-water interface. In the presence of Zn(II) ions in the subphase, the surface pressure-area and surface potential-area isotherms suggest that HI may aggregate at the air-water interface. It was observed that increasing the concentration of Zn(II) ions in the acidic (pH 2) aqueous solution of HI led to an increase of the area at a specific surface pressure. It was also seen that the conformation of HI in the basic (pH 9) medium had a reverse effect (decrease in the surface area) with the increase of the concentration of Zn(II) ions in solution. From the compression-decompression cycles we can conclude that the aggregated HI film at air-water interface is not stable and tends to restore a monolayer of monomers. These results were confirmed from UV-vis and fluorescence spectroscopy analysis. Infrared reflection-absorption and circular dichroism spectroscopy techniques were used to determine the secondary structure and orientation changes of HI by zinc ions. Generally, the aggregation process leads to a conformation change from α-helix to β-strand and β-turn, and at the air-water interface, the aggregation process was likewise seen to induce specific orientations for HI in the acidic and basic media. A proposed surface orientation model is presented here as an explanation to the experimental data, shedding light for further research on the behavior of insulin as a Langmuir monolayer.     

Amphiphilic meso-disubstituted porphyrins: synthesis and the effect of the hydrophilic group on absorption spectra at the air-water interface

Five amphiphilic meso-disubstituted porphyrins bearing one polar group were synthesized, and their monolayer films were prepared. Their limiting molecular areas obtained from pi-A isotherms were 0.5-0.6 nm2, which were smaller than those of the corresponding meso-tetrasubstituted porphyrins. At the air-water interface, the disubstituted porphyrins showed a broad band in visible absorption spectra compared with the solution state, and the red shift of the Soret band exhibited a significant dependence on the kind of hydrophilic groups at the meso positions. Interestingly, the monolayer of the disubstituted porphyrin bearing a carboxyphenyl group (1-CO2H) showed a blue shift of the Soret band by adding cadmium chloride to the subphase, and the spectra varied upon multilayer deposition. The observed phenomena were interpreted by using the exciton theory. The effect of hydrophilic substituents on the absorption spectra of disubstituted porphyrin monolayers is discussed.     

Polymerization of a cysteinyl peptidolipid Langmuir film

The surface pressure-area isotherm of a cysteinyl peptidolipid on a pure water subphase (pH 5.8) was compared with that on a water subphase saturated with oxygen and buffered with ammonium bicarbonate (pH 7.8). A reduction of the limiting molecular area was observed for the isotherm measured on the subphase saturated with oxygen. Hysteresis in the compression-decompression cycles of the Langmuir film was also observed. Taking into consideration the chemical structure of the peptidolipid, we rationalized that the free sulfhydryl groups of the peptidolipid were oxidized in the presence of oxygen in the alkaline subphase to form intermolecular disulfide bonds at the air-water interface. The surface topography of the peptidolipid Langmuir film was observed by epi-fluorescence microscopy and the Langmuir-Blodgett film by environmental scanning electron microscopy (ESEM). The micrographs showed evidence of the polymerization of the cysteinyl peptidolipid at the air-water interface. Furthermore, the XPS spectra of the Langmuir-Blodgett films also proved the existence of disulfide bonds. The control peptidolipid C(18)-Ser-Gly-Ser-OH showed identical surface pressure-area isotherms in the presence or absence of an oxygen-saturated subphase.     

The interaction between G-quadruplex-forming oligonucleotide and cationic surfactant monolayer at the air/water interface

We report on the interactions between a 21-mer quadruplex-forming oligonucleotide bearing human telomere sequence of dG(3)(T(2)AG(3))(3) (G4 DNA) and a positively charged dioctadecyldimethylammonium bromide (DODAB) monolayer at the air-aqueous interface, studied by surface film balance measurements. In the presence of G4 DNA, the π-A isotherm of the cationic Langmuir film shifted to lower molecular areas when compared with the reference isotherm recorded on the subphase containing only 50 mM triethylamine-acetate (TEAA) buffer. The presence of quadruplex-stabilizing metal cations (K(+) or Na(+)) further affected profiles of π-A isotherms. Further insight into processes related to the G4 DNA-monolayer interactions was provided by recording time profiles of the surface pressure of monolayer at a constant mean molecular area. In these experiments G4 DNA and/or metal ions were sequentially injected under the monolayer surface. Results indicated that multistranded assemblies of G4 DNA were formed at the monolayer interface even in the absence of metal ions, which suggested that the charged cationic surface of Langmuir monolayer induced aggregation of guanine-rich DNA strands. The presence of sodium and potassium ions inhibited formation of multi-stranded assemblies through the competitive G-quadruplex formation but to different extent that might be related to the differences in stability and topology of both quadruplexes.     

Unexpected bilayer formation in Langmuir films of nucleolipids

Langmuir monolayers have been extensively investigated by various experimental techniques. These studies allowed an in-depth understanding of the molecular conformation in the layer, phase transitions, and the structure of the multilayer. As the monolayer is compressed and the surface pressure is increased beyond a critical value, usually occurring in the minimal closely packed molecular area, the monolayer fractures and/or folds, forming multilayers in a process referred to as collapse. Various mechanisms for monolayer collapse and the resulting reorganization of the film have been proposed, and only a few studies have demonstrated the formation of a bilayer after collapse and with the use of a Ca(2+) solution. In this work, Langmuir isotherms coupled with imaging ellipsometry and polarization modulation infrared reflection absorption spectroscopy were recorded to investigate the air-water interface properties of Langmuir films of anionic nucleolipids. We report for these new molecules the formation of a quasi-hexagonal packing of bilayer domains at a low compression rate, a singular behavior for lipids at the air-water interface that has not yet been documented.     

INDUSTRIAL NEWS

Interactions between monolayers of trilaurylamine (TLA) and various water-soluble corrosion, hydrate and scale inhibitors, as well as acetic acid and FeCl₂, have been studied by means of the Langmuir technique, The water-soluble compounds were present in the subphase before TLA was spread. Their influence on the monolayer properties were measured by means of surface pressure-area ( k-A) isotherms and constant surface pressure-area relaxation measurements. All the added water soluble species gave rise to monolayer expansion. The monolayer expansion observed for TLA at pH 1, increased when FeCl₂ was added to the subphase at the same pH. Polyethyleneglycols with molecular weight higher than 200 destabilized totally the TLA-monolayer, probably due to bending and folding into multilayers. Monolayer expansion and film instability increased with increased acetic acid concentrations. The destabilization mechanism in this case was most likely due to a combination of nucleation and dissolution of film components into the subphase. The corrosion inhibitor Dyno KI 384 had a higher surface activity than TLA. Hence the monolayer     

Surface chemistry and in situ spectroscopy of a lysozyme langmuir monolayer

Surface pressure and surface potential-area isotherms were used to characterize a lysozyme Langmuir monolayer. The compression-decompression cycles and stability measurements showed a homogeneous and stable monolayer at the air-water interface. Salt concentration in the subphase and pH of the subphase were parameters controlling the homogeneity and stability of the Langmuir monolayer. In situ UV-vis and fluorescence spectroscopies were used to verify the homogeneity of the lysozyme monolayer and to identify the chromophore residues in the lysozyme. Optimal experimental conditions were determined to prepare a homogeneous and stable lysozyme Langmuir monolayer.     

Mode of interaction of two fluorinated-hydrogenated hybrid amphiphiles with dipalmitoylphosphatidylcholine (DPPC) at the air-water interface

Two-component Langmuir monolayers formed on 0.02M Tris buffer solution (pH 7.4) with 0.13M NaCl at 298.2K were investigated for two different fluorinated-hydrogenated hybrid amphiphiles (F6PH5PPhNa and F8PH5PPhNa or F6 and F8, respectively) with DPPC. Surface pressure (pi), surface potential (DeltaV) and dipole moment (mu( perpendicular)) as a function of molecular surface area (A) were measured by employing the Whilhelmy method and an ionizing electrode method. From the A- and DeltaV-X(F6) (or X(F8)) curves, partial molecular surface area (PMA) and apparent partial molecular surface potential (APSP) were determined as a function of surface mole fraction (X(Fn)) at discrete surface pressures. Then, the behavior of occupied surface areas and surface potentials of the respective components could be made clearer. Compressibility (C(s)), elasticity (C(s)(-1)), and excess Gibbs energy (DeltaG((ex))) as a function of X(F6) (or X(F8)) were estimated at definite pressures. These physico-chemical parameters were found to reflect the mechanical strength of monolayer films formed. The regular solution theory being applied to DeltaG((ex)), the activity coefficients (f) as well as the interaction parameter (I(p)) between DPPC and two hybrid amphiphiles in the binary monolayers were evaluated. I(p) values thus obtained indicated that F8 molecules interact more strongly with DPPC molecules than F6. Moreover, in order to better understand the morphological monolayer state, Langmuir-Blodgett (LB) films made from DPPC and fluorinated-hydrogenated hybrid amphiphiles were examined by atomic force microscopy (AFM). The miscibility of the two components in the monolayer state is evidenced by these thermodynamic quantities and AFM observations. Furthermore, AFM images demonstrated that F8 could more effectively disperse the ordered domains of DPPC than F6.     

Langmuir monolayer properties of the fluorinated-hydrogenated hybrid amphiphiles with dipalmitoylphosphatidylcholine (DPPC)

Surface pressure–area (π–A), surface potential–area (ΔV–A), and dipole moment–area (μ–A) isotherms were obtained for the Langmuir monolayer of two fluorinated-hydrogenated hybrid amphiphiles (sodium phenyl 1-[(4-perfluorohexyl)-phenyl]-1-hexylphosphate (F6PH5PPhNa) and (sodium phenyl 1-[(4-perfluorooctyl)-phenyl]-1-hexylphosphate (F8PH5PPhNa)), DPPC and their two-component systems at the air/water interface. Monolayers spread on 0.02 M Tris buffer solution (pH 7.4) with 0.13 M NaCl at 298.2 K were investigated by the Wilhelmy method, ionizing electrode method and fluorescence microscopy. Moreover, the miscibility of two components was examined by plotting the variation of the molecular area and the surface potential as a function of the molar fraction for the fluorinated-hydrogenated hybrid amphiphiles on the basis of the additivity rule. The miscibility of the monlayers was also examined by construction of two-dimensional phase diagrams. Furthermore, assuming the regular surface mixture, the Joos equation for analysis of the collapse pressure of two-component monolayers allowed calculation of the interaction parameter (ξ) and the interaction energy (−Δ) between the fluorinated-hydrogenated hybrid amphiphiles and DPPC. The observations by a fluorescence microscopy also supported our interpretation as for the miscibility in the monolayer state. Comparing the monolayer behavior between the two binary systems, no remarkable difference was found among various aspects. Among the two combinations, the mole fraction dependence in monlayer properties was commonly classified into two ranges: 0 ≤ X ≤ 0.3 and 0.3 < X ≤ 1. Dependence of the chain length of fluorinated part was reflected for the molecular packing and surface potential.     

Molecular organization in two-dimensional films of liquid I. Langmuir films of binary mixtures of liquid crystals with a crystalline mixtures terminal cyano group

The Langmuir films of two liquid crystal materials, 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4"-cyano-p-terphenyl (5CT), and of their mixtures have been studied by recording surface pressure-area isotherms and Brewster angle microscopy (BAM) images. The pure liquid crystals revealed very different characters of the surface pressure-area isotherms indicating different organization of the molecules and different molecular interactions in the monolayer at the water-air interface. The surface pressure-area isotherms of Langmuir films formed from 8CB/5CT mixtures give evidence for phase separation of the components over the whole range of molar fractions. Similar conclusions have been drawn on the basis of BAM image analysis.     

Formation of flat, homogeneous surfaces of organized molecular films of three-armed polymerizable amphiphiles with metal-scavenging properties

Surface complexing (i.e., metal-bridged polymerization in this study) of a three-armed amphiphilic compound with metal-scavenging properties has been investigated using the surface pressure-area (π-A) isotherms of a Langmuir monolayer from the subphase. Inductively coupled plasma mass spectrometry (ICP-MS) was also carried out on eluted solutions from corresponding multilayers of the solid. Furthermore, the molecular arrangement and surface morphology of organized molecular films of the resultant comb polymer were estimated by in-plane and out-of-plane X-ray diffraction (XRD) and by atomic force microscopy. From an analysis of the wide-angle X-ray diffraction of the corresponding monomer in the bulk, the long hydrocarbon chains are observed to pack hexagonally in the solid state. Compared to their monolayer on distilled water as the subphase, a polymerized monolayer on a buffer solution containing Cd(2+) ions is remarkably expanded at 15 °C. From ICP-MS and IR measurements, it is found that this monolayer stoichiometrically contains Cd(2+) ions on the -SH group. It is found by XRD that highly ordered layer structures and regular 2D lattices are constructed in the organized molecular films of the Cd-bridged comb polymer. Furthermore, the surface morphology of Langmuir-Blodgett films fabricated from the monolayers on a buffer solution containing Cd(2+) and Pd(2+) shows flat and smooth domains upon metal scavenging and polymerization.     

4A沸石从水溶液中吸附氯化十四烷基吡啶

4A沸石可部分或全部代替三聚磷酸钠,以减少合成洗涤剂对水质富营养化的影响,在硬水中使用也不致降低洗涤效力.本文研究了4A沸石在不同pH水溶液中和无机盐存在下对氯化十四烷基吡啶(TPC)的吸附作用,初步探讨了吸附机制.     

Study of molecular interaction in the mixed film of arachidic acid and metal beta-diketonate complexes by the "surface ions" method

Molecular interaction is very important for the mechanical properties and application of Langmuir films. In general, fatty acid film is stabilized by certain "subphase ions." In this work, two metal beta-diketonate complexes (M(tmhd)n, tmhd=2,2,6,6-tetramethyl-3,5-heptanedionate) were used as "surface ions" to form stable condensed films with different ratios at the air/water interface. The pi-A isotherms of the mixed films had been measured. The smaller molecular area of the metal beta-diketonate complexes indicated that the metal beta-diketonate complexes form multilayer condensed structures at high pressure at the air/water interface. However, arachidic acid (AA) retained a monolayer structure at high pressure in the mixed system. No considerable phase separations appeared during the compression of the mixed films, which indicated that the mixed films of metal beta-diketonate complexes and AA were miscible and stable. The molecular interaction of the two components in the mixed films was investigated in detail. Mixed systems with the mixing ratio of M(tmhd)n:AA=1:2 were chosen to study the effects of the interaction on the mechanical properties of the mixed films. The molecular interaction between AA and Ce(tmhd)4 is proved to be more significant than that between AA and Sr(tmhd)2, and the pi-A isotherms of the mixed films differ a lot from that of pure AA monolayer. Due to the strong intermolecular interaction, the liquid region disappears in the Ce(tmhd)4/AA mixed films, and dynamic elasticity is improved especially at high surface pressure. On the other hand, the interaction between the AA and the Sr(tmhd)2 is much weaker and the effects of the interaction on the properties (pi-A isotherm and dynamic elasticity) of the mixed films are not so significant, especially at low surface pressure. These results are in accordant with that of the UV spectra analyses.     

Effect of saponins on cell surface properties of Penicillium simplicissimum: performance on adsorption of cadmium(II)

Previous studies about the effect of biosurfactants on cell surface properties mainly focus on cell surface hydrophobicity. In the present study, the effects of plant-derived biosurfactants saponins on cell surface charge and the adsorption of cadmium(II) by Penicillium simplicissimum were studied. The pretreatment of saponins changed the optimal pH from 6 to 5 for Cd(II) adsorption. All the adsorption processes by the intact and saponins-pretreated biomasses followed the Langmuir isotherms better than the Freundlich isotherms. According to the Langmuir isotherms, the maximum adsorption of Cd(II) (qmax) was increased from 51.6 to 74.6 mg/l by the pretreatment of 0.025% saponins. The mechanisms were also analyzed by Fourier transform infrared spectrometer (FTIR), energy dispersive X-ray (EDAX), and scanning electron microscope (SEM) analysis. The results indicated that the pretreatment of saponins changed the cell surface charge of P. simplicissimum and therefore influenced the adsorption of cadmium(II).     

Molecular organization in two-dimensional films of liquid I. Langmuir films of binary mixtures of liquid crystals with a crystalline mixtures terminal cyano group

The Langmuir films of two liquid crystal materials, 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4"-cyano-p-terphenyl (5CT), and of their mixtures have been studied by recording surface pressure-area isotherms and Brewster angle microscopy (BAM) images. The pure liquid crystals revealed very different characters of the surface pressure-area isotherms indicating different organization of the molecules and different molecular interactions in the monolayer at the water-air interface. The surface pressure-area isotherms of Langmuir films formed from 8CB/5CT mixtures give evidence for phase separation of the components over the whole range of molar fractions. Similar conclusions have been drawn on the basis of BAM image analysis.