环保增塑剂柠檬酸三(2-乙基)己酯的合成

以柠檬酸和2-乙基己醇为原料,用结晶硫酸高铈为催化剂合成环保增塑剂柠檬酸三(2-乙基)己酯,考察了反应温度、催化剂用量、醇酸摩尔比、反应时间等因素对反应结果的影响,对合成的产品进行了红外光谱分析。实验结果表明,硫酸高铈催化合成柠檬酸三(2-乙基)己酯的最佳反应条件为n(2-乙基已醇)∶n(柠檬酸)=3.60∶1,催化剂用量为柠檬酸质量的1.5%,反应时间为90 m in,反应温度为150℃~160℃,在最佳反应条件下,柠檬酸三(2-乙基)己酯收率在98%以上。     

二溴和二碘取代的手性Schiff碱-钒(Ⅳ)络合物催化硫醚不对称氧化

 由廉价的手性氨基醇与3,5-二溴或3,5-二碘水杨醛缩合得到配体,配体与VO(acac)2按一定比例络合形成络合物催化剂,考察了室温下该催化剂对芳基甲基硫醚不对称氧化反应的催化性能. 结果表明,当VO(acac)2/配体摩尔比为1/2, 并且以H2O2作为氧源时,催化剂具有较高的活性和中等至很高的对映选择性. 与(S)-苯丙氨醇和(R)-亮氨醇衍生得到的配体相比,由(S)-缬氨醇得到的配体具有更高的对映选择性. 在缓慢滴加H2O2的条件下,以3,5-二碘水杨醛和(S)-缬氨醇缩合得到的Schiff碱为配体,以苯甲硫醚和对溴苯甲硫醚为底物时,产物的ee值分别为88%和92%. 研究表明,与Fe(acac)3/Schiff碱体系不同,向VO(acac)2/Schiff碱催化体系中加入羧酸或羧酸盐类化合物并不能改善催化剂的催化性能.     

沙库必曲中间体(R)-2-(叔丁氧羰基氨基)-3-(联苯-4-基)丙醇的合成

采用D-酪氨酸衍生物为原料,与苯磺酰氯反应制得叔丁氧羰基保护的D-苯丙氨醇苯磺酸酯,经还原,再在5 mol% N-杂环卡宾(NHC)钯催化剂(IMes)Pd(Py)Cl作用下与苯硼酸经过Suzuki-Miyaura偶联反应得到沙库必曲重要中间体(R)-2-(叔丁氧羰基氨基)-3-(联苯-4-基)丙醇,总产率大于57%,ee值大于99%。     

手性2-(2-吡啶基)-4-羧乙基-1,3-噻唑烷的合成及应用研究

以分级结晶和柱层析法对手性配体2-(2-吡啶基)-4-羧乙基-1,3-噻唑烷(A)进行了异构体分离提纯。将其与[Rh(COD)Cl]_2制备的原位催化剂用于催化苯乙酮及其它几种芳香酮的不对称硅氢化反应,化学收率达90％左右,光学纯度达80％e.e.左右,噻唑烷环上的C_2构型对催化反应结果无影响,C_4位上酯基的影响也不大。     

手性2-(2-吡啶基)-4-羧乙基-1, 3-噻唑烷的合成及应用研究

以分级结晶和柱层析法对手性配体2-(2-吡啶基)-4-羧乙基-1,3-噻唑烷(A)进行了异构体分离提纯。将其与[Rh(COD)Cl]~2制备的原位催化剂用于催化苯乙酮及其它几种芳香酮的不对称硅氢化反应, 化学收率达90%左右, 光学纯度达80%e.e.左右, 噻唑烷环上的C~2构型对催化反应结果无影响, C~4位上酯基的影响也不大。     

1,3-手性转移反应的研究 (4R)-和(4S)-4-甲基(E)-2-辛烯醇的合成

以手性辛烯二醇双酯与甲基锂铜反应, 经1,3手性转移, 分别生成立体选择性高的(4R)和(4S)-4-甲基-辛烯醇酯。     

铑(Ⅲ)催化N-磺酰基2-甲酰苯胺与烯烃环化制备(2H)喹啉(英文)

开发了一种用铑(III)催化的N-磺酰基2-氨基苯甲醛与烯烃环化生成喹啉衍生物的方法,得到较高产率的喹啉衍生物,并且在反应条件下,反应具有较好的官能团兼容性.这是首次运用铑(III)作为催化剂合成烷基1-磺酰基-1,2-二氢喹啉-3-羧酸酯.该催化体系表现较好的催化性且反应操作较为简单.     

铑(Ⅲ)催化N-磺酰基2-甲酰苯胺与烯烃环化制备(2H)喹啉(英文)

开发了一种用铑(III)催化的N-磺酰基2-氨基苯甲醛与烯烃环化生成喹啉衍生物的方法,得到较高产率的喹啉衍生物,并且在反应条件下,反应具有较好的官能团兼容性.这是首次运用铑(III)作为催化剂合成烷基1-磺酰基-1,2-二氢喹啉-3-羧酸酯.该催化体系表现较好的催化性且反应操作较为简单.     

高对映选择性的有机催化的二氟烯醇硅醚与β,γ-不饱和-α-酮酸酯的不对称Mukaiyama-aldol反应

首次研究了二氟烯醇硅醚1与β,γ-不饱和酮酸酯2的反应.发现不论使用叔胺或叔胺-氢键给体双功能催化剂,均专一地发生Mukaiyama-aldol反应生成相应的叔醇3.利用手性氢化奎宁衍生的双功能脲催化剂11高对映选择性地实现了这一反应,为合成α-二氟烷基取代的手性叔醇提供了一种新方法.不同芳基取代的二氟烯醇硅醚以及γ位不同芳基取代的酮酸酯化合物均反应良好.在所考察的15个例子中,反应产率中等到良好(44%～81%),对映选择性中等到优秀(72%～96%).反应产物可方便转化为二氟烷基取代的手性二醇或三醇化合物.     

1,3-手性转移反应的研究 (4R)-和(4S)-4-甲基(E)-2-辛烯醇的合成

以手性辛烯二醇双酯6和7与甲基锂铜反应,经1,3手性转移,分别生成立体选择性高的(4R)和(4S)-4-甲基-辛烯醇酯8a 和9a     

Syntheses of Optically Active Polyacrylates

ABSTRACT

Different secondary alcohols were resolved by lipase catalyzed transesterification using 2,3-butanedione monoxime acrylate as acrylating agent. The results showed that the reaction rates were the fastest among reactions reported until now. The effect of solvent on the transesterification rate was studied. The enantiomeric excess (ee) and enantiomeric purity (E value) of all the acrylate monomers were determined. The synthesized optically active acrylate monomers were polymerized by free radical polymerization technique.     

Proton exchange and transesterification reactions of acetate enolates with alcohols in the gas phase

Transesterification reactions and proton exchange reactions between acetate enolates and alcohols were studied both separately and together. Kinetic analysis shows that transesterification and proton exchange happen in a single collision event. The transesterification reaction is best viewed as an endothermic proton transfer, followed by an exchange of alkoxide and an exothermic proton transfer. Reaction barriers were modeled by Rice-Ramsperger-Kassel-Marcus theory and compared to quantum calculations. CBS-QB3 achieves good agreement whereas B3LYP and MP2 give slightly higher barriers. Quantum calculations also predict that the transition state for these transesterification reactions is the same as that for direct transesterification reactions between alkoxides and esters.     

Solid-phase synthesis of indolecarboxylates using palladium-catalyzed reactions

Polymer-supported, palladium-catalyzed cyclization reactions effectively synthesized indolecarboxylates. Palladium-catalyzed carbon-carbon bond-forming reactions of immobilized enaminoesters followed by transesterification yielded indole 2- or 3-carboxylates with various functional groups on the benzene ring. Indolecarboxylates were efficiently cyclized via an intramolecular palladium-catalyzed amination reaction of immobilized N-substituted dehydrohalophenylalanines, and immobilized N-acetyl-dehydroalanines were efficiently converted into indolecarboxylates via tandem Heck-amination reactions.     

Mono-organotin(IV) compounds as esterification and transesterification catalysts

A series of monoorganotin(IV) compounds has been investigated as transesterification catalysts for the reaction of butyl propionate with methanol. The most active catalysts were found to be those which contain tin-halogen bonds, e.g. monobutyltin trichloride (BuSnCl₃), and the least effective were the coordinatively saturated monoorganotin derivatives. Certain of the mono(2-carboalkoxyethyl)tin compounds were found to undergo a facile autocatalysed transesterification reaction with alcohols. Coordination of the carbonyl group in the ester to the tin catalyst is an important factor influencing its activity. A study of the catalysis of the esterification of propionic acid by BuSnCl₃ is reported.     

过渡金属催化合成吡咯-2-甲酸酯的研究进展

吡咯-2-甲酸酯广泛存在于生物活性分子中,在医药领域具有十分重要的应用,因此吡咯-2-甲酸酯类化合物的合成研究受到了广泛关注.过渡金属催化的环加成反应在合成吡咯骨架方面应用广泛,具有区域选择性专一的优点.且过渡金属配体导向的C-N键构筑方法具有原子步骤经济性较高、效率高、反应条件温和以及选择性高等优点.按照过渡金属催化剂分类,对吡咯-2-甲酸酯的[3+2]、[4+1]与[2+2+1]等成环反应的合成方法进行综述,介绍了过渡金属催化吡咯-2-甲酸酯化合物的机理及其应用,并对吡咯-2-甲酸酯的合成进行了展望.     

Efficient transesterification/acylation reactions mediated by N-heterocyclic carbene catalysts

Imidazol-2-ylidenes, a family of N-heterocyclic carbenes (NHC), are efficient catalysts in the transesterification involving numerous esters and alcohols. Low catalyst loadings of aryl- or alkyl-substituted NHC catalysts mediate the acylation of alcohols with enol acetates in short reaction times at room temperature. Commercially available and more difficult to cleave methyl esters react with primary alcohols in the presence of alkyl-substituted NHC to efficiently form the corresponding esters. While primary alcohols are selectively acylated over secondary alcohols with use of enol esters as acylating agents, methyl and ethyl esters can be employed as protective agents for secondary alcohols in the presence of the more active alkyl-substituted NHC catalysts. The NHC-catalyzed transesterification protocol was simplified by generating the imidazol-2-ylidene catalysts in situ.     

Sequence-regulated copolymers via tandem catalysis of living radical polymerization and in situ transesterification

Sequence regulation of monomers is undoubtedly a challenging issue as an ultimate goal in polymer science. To efficiently produce sequence-controlled copolymers, we herein developed the versatile tandem catalysis, which concurrently and/or sequentially involved ruthenium-catalyzed living radical polymerization and in situ transesterification of methacrylates (monomers: RMA) with metal alkoxides (catalysts) and alcohols (ROH). Typically, gradient copolymers were directly obtained from the synchronization of the two reactions: the instantaneous monomer composition in feed gradually changed via the transesterification of R(1)MA into R(2)MA in the presence of R(2)OH during living polymerization to give R(1)MA/R(2)MA gradient copolymers. The gradient sequence of monomers along a chain was catalytically controlled by the reaction conditions such as temperature, concentration and/or species of catalysts, alcohols, and monomers. The sequence regulation of multimonomer units was also successfully achieved in one-pot by monomer-selective transesterification in concurrent tandem catalysis and iterative tandem catalysis, providing random-gradient copolymers and gradient-block counterparts, respectively. In contrast, sequential tandem catalysis via the variable initiation of either polymerization or in situ transesterification led to random or block copolymers. Due to the versatile adaptability of common and commercially available reagents (monomers, alcohols, catalysts), this tandem catalysis is one of the most efficient, convenient, and powerful tools to design tailor-made sequence-regulated copolymers.     

Amberlyst-15型离子交换树脂催化γ-丁内酯酯交换反应的研究

从反应温度、时间、催化剂的用量、催化剂的重复使用、产物的分离等方面系统研究了γ-丁内酯与甲醇的酯交换反应,得到了优化的反应条件,即,反应温度为28℃,反应时间为10h,γ-丁内酯/甲醇/Amberlyst-15为0.9∶12.5∶12.5(V/V/m)。在该反应条件下,酯交换产物的分离产率达到77%。同时考察了γ-丁内酯与其它6种醇的酯交换反应,证明了在较高反应温度下,该树脂对其它醇仍有较好的催化活性(产物的质量百分数为50%～60%)。然而,随着醇体积的增大,反应的转化率逐渐下降。     

Immobilization does not influence the enantioselectivity of CAL-B catalyzed kinetic resolution of secondary alcohols

Decreasing enantioselectivity (E-value) by increasing conversion has been observed in transesterification reactions of secondary alcohols catalyzed by a pure protein formulation of lipase B from Candida antarctica (Novozym 525 F). Addition of a range of enantiopure alcohols caused a temporary increase in selectivity of the transesterification reaction of 3-chloro-1-phenoxy-2-propanol with vinyl butanoate. The corresponding immobilized lipase B, (Novozym 435) showed a similar relationship between the E-value and degree of conversion.     

Lipase-catalyzed kinetic resolution of β-borylated carboxylic esters

The kinetic resolution of chiral β-borylated carboxylic esters via lipase-catalyzed hydrolysis and transesterification reactions was studied. The enantioselective hydrolysis catalyzed by CAL-B furnished the β-borylated carboxylic acid with reasonable enantiomeric excess (62% ee), while both methyl and ethyl β-borylated carboxylic esters were recovered with excellent ee (>99%). Meanwhile, the transesterification reaction of β-borylated carboxylic esters and several alcohols, catalyzed by CAL-B, only indicated a high selectivity when ethanol and methyl-(β-pinacolylboronate)-butanoate were used as substrates, which gave ethyl-(β-pinacolylboronate)-butanoate with >99% ee.