A flow-through microarray cell for the online SERS detection of antibody-captured E. coli bacteria

We present an immunoassay microarray flow-through system for the surface-enhanced Raman scattering (SERS) analysis of bacteria. The system has been constructed to support and automatize the nondestructive in situ analysis of different microorganisms in aqueous environment. After the immobilization of the desired antibodies to an activated PEG-coated surface, the chip is placed into the flow cell which is then flushed with the contaminated sample. Finally, colloidal metal nanoparticles are added and the cells are detected label-free by SERS. Here, we introduce the successful imaging of single microorganisms in the flow cell as well as the quantification of microorganisms in water by SERS mapping with a linear range between 4.3 × 10³ to 4.3 × 10⁵ cells/mL. The method has potential for routine application, e.g. for drinking water control.     

Selection of aptamers for a non-DNA binding protein in the context of cell lysate

Aptamer-facilitated Protein Isolation from Cells (AptaPIC) is a recently introduced method that allows, in particular, generation of aptamers for a protein target in a context of a crude cell lysate. The approach enables efficient, tag-free, affinity purification of target proteins which are not available in a pure form a priori, and for which no affinity ligands are available. In the proof-of-principle work, AptaPIC was used to develop aptamers for and purify MutS, a DNA mismatch repair protein. The DNA-binding nature of MutS raised concerns that AptaPIC was not a generic technique and could be inapplicable to protein targets that do not possess native nucleic acid-binding properties. Here we prove that these concerns are invalid. We used AptaPIC to generate pools of aptamers for human Platelet-Derived Growth Factor chain B (PDGF-B) protein, a non-DNA binding protein, in the context of a bacterial cell lysate, and subsequently purify it from the same lysate. Within a small number of rounds, the efficiencies of aptamer selection were similar in conventional Systematic Evolution of Ligands by Exponential Enrichment (SELEX) for pure protein and in AptaPIC for protein in the cell lysate. The conventional selection approach resulted in an aptamer pool with an EC(50) value of 2.0±0.1 μM, while the AptaPIC selection approach resulted in a pool with an EC(50) value of 3.9±0.4 μM. Our results clearly demonstrate that selection of aptamers for proteins in the cell lysate is not only realistic but also efficient.     

A label-free and sensitive fluorescent assay for one step detection of protein kinase activity and inhibition

In this paper, a label-free, highly sensitive and simple assay for one step detection of protein kinase (PKA) activity and inhibition that avoids the fluorescent dye process has been established. The detection was based on the fluorescence (FL) quenching of peptide-Ag nanoclusters (Ag NCs) caused by antibody modified Au nanoparticles (anti-Au NPs) via fluorescence resonance energy transfer (FRET). With PKA and adenosine 5′-triphosphate (ATP) introduced, the substrate peptide of Ag NCs could react with PKA via targeted phosphorylation, and followed by the linking interactions between peptide-Ag NCs and anti-Au NPs. According to the fluorescence quenching of Ag NCs, the activity of protein kinase can be facilely monitored in the range of 0.1–2000 mU/μL with high sensitivity. The detection limit for PKA is 0.039 mU/μL. We further explored the inhibitory effect of H-89 for protein kinase activity. The developed method was also applied to the investigation of drug-induced PKA activation in HeLa cells, which provides a promising means for screening of kinase-related drugs and the clinical diagnosis of disease.     

Dye-doped silica nanoparticle labels/protein microarray for detection of protein biomarkers

We report a dye-encapsulated silica nanoparticle as a label, with the advantages of high fluorescence intensity, photostability, and biocompatibility, in conjunction with microarray technology for sensitive immunoassay of a biomarker, interleukin-6 (IL-6), on a microarray format. The tris(2,2'-bipyridyl)ruthenium(ii) chloride hexahydrate (Rubpy) dye was incorporated into silica nanoparticles using a simple one-step microemulsion synthesis. In this synthesis process, Igepal CA520 was used as the surfactant, therefore, no requirement of cosolvent during the synthesis and the particle size was reduced comparing to the commonly used Triton surfactant system. The nanoparticles are uniform in size with a diameter of 50 nm. The microarray fluorescent immunoassay approach based on dye-doped silica nanoparticle labels has high sensitivity for practical applications with a limit of detection for IL-6 down to 0.1 ng mL(-1). The calibration curve is linear over the range from 0.1 ng mL(-1) to 10 ng mL(-1). Furthermore, results illustrated that the assay is highly specific for IL-6 in the presence of range of cytokines or proteins. The RuDS dye-labeled nanoparticles in connection with protein microarrays show the promise for clinical diagnosis of biomarkers.     

Polymeric nanoparticles for protein kinase activity

Nanoparticles were prepared from poly-ion complexes, possessing both PEI-FITC-(PKA-specific substrate) (kemptide) and PAA-TRITC, which produce intermolecular FRET; the nanoparticles were dissociated by phosphorylation, presented a strong FITC intensity and can be applied to high-throughput screening for large chemical libraries, for drug discovery of kinase inhibitors.     

Rhodamine B doped silica nanoparticle labels for protein microarray detection

A core-shell Rhodamine B-doped SiO2 nanoparticle was synthesized and its fluorescent intensity was found to be 1000 times higher than that of individual Rhodamine B molecule. The doped nanoparticles were further conjugated with streptavidin and the resulting nanoparticles were used in the detection of reverse-phase protein microarrays, in which human IgG of various concentrations was first immobilized on aldehyde-modified glass slides and then biotinlyated goat anti human IgG as well as the labeled nanopart...     

A real-time,fluorescence-based assay for Rho-associated protein kinase activity

Inhibitors of Rho-associated protein kinase (ROCK) enzymatic activity have been shown to reduce the invasive phenotype observed in metastatic hepatocellular carcinoma (HCC). We describe the design, synthesis, and evaluation of a direct probe for ROCK activity utilizing a phosphorylation-sensitive sulfonamido-oxine fluorophore, termed Sox. The Sox fluorophore undergoes an increase in fluorescence upon phosphorylation of a proximal amino acid via chelation-enhanced fluorescence (CHEF, ex. = 360 nm and em. = 485 nm), allowing for the direct visualization of the rate of phosphate addition to a peptide substrate over time. Our optimal probe design, ROCK-S1, is capable of sensitively reporting ROCK activity with a limit of detection of 10 pM and a high degree of reproducibility (Z’-factor = 0.6 at 100 pM ROCK2). As a proof-of-principle for high-throughput screening (HTS) we demonstrate the ability to rapidly assess the efficacy of a 78 member, small molecule library against ROCK2 using a robotics platform. We identify two previously unreported ROCK2 inhibitor scaffolds, PHA665752 and IKK16, with IC₅₀ values of 3.6 μM and 247 nM respectively. Lastly, we define conditions for selectively monitoring ROCK activity in the presence of potential off-target enzymes (PKCα, PKA, and PAK) with similar substrate specificities.     

Fluorescence detection techniques for protein kinase assay

Traditional methods for protein kinase (PK) assay are mainly based on use of ³²P-labeled adenosine triphosphate (ATP); applications of such methods are, however, hampered by radioactive waste and short half-life of ³²P-labeled ATP. Therefore non-radioactive methods, such as fluorescence detection techniques are good alternative. In this review, we describe the principles of four fluorescence techniques (fluorescence intensity endpoint measurement, fluorescence resonance energy transfer (FRET), fluorescence polarization (FP), and fluorescence lifetime imaging) and provide an overview of applications of these fluorescence detection techniques in protein kinase assay, underlining their relative advantages and limitations. Research trends in this field are also highlighted. Figure Schematic representation of kinase assay based on direct fluorescence polarization measurements. The fluorescent peptide, on phosphorylation by kinase, binds to a phosphospecific antibody, which leads to a high FP value     

A microarray chip for label-free detection of narcotics

A protein array chip for label-free optical detection of low molecular weight compounds has been developed. As a proof of principle, the chip is proven capable of rapidly (approximately 1 min) determining hits from aqueous cocktails composed of four common narcotics, cocaine, ecstasy, heroin, and amphetamine, using imaging surface plasmon resonance (SPR) as the detection principle. The chip is produced by injecting a mixture of antibodies and letting them self-sort and bind to narcotic analog coupled proteins already present in a predefined pattern on the supporting substrate. An indirect detection method, where antibodies are displaced from the surface upon recognition of their corresponding narcotics, is used to obtain the optical contrast and thus a detectable SPR and/or ellipsometric signal. Two types of readouts are possible from the present setup: intensity SPR images and SPR/ellipsometric sensorgrams. Positive hits were routinely obtained for analyte concentrations of 50 pg/μL and the limit of detection, without any parameter optimizations, seems to fall in the range 0.5 pg/μL (1.4 nM) for heroin, 2.5 pg/μL (8.2 nM) for cocaine, and 5 pg/μL for the other two narcotics (26 nM for ecstasy and 37 nM for amphetamine). With improved readout possibilities (sampling frequency), signal evaluation algorithms, and antibody–antigen design strategies, we believe this limit can be further improved. The chip is shown to work for many measurement cycles with excellent reproducibility. Moreover, with a more advanced fluidic system, excess injected antibodies could be collected and reused for many cycles, which could make the running costs of the system very low. The chip is in no way limited to detection of narcotics. Other low molecular weight compounds could easily be detected on the same chip. For example, trinitrotoluene detection has already been demonstrated using our chip. Possible areas of application for the system are therefore envisaged in airport and underground transport security, customs, drug interdiction, forensics, and as warning alerts on military equipment and personnel. Figure Narcotics chip (left) composed of spots of piezodispensed analog-coupled proteins that are loaded with antibodies to form a patterned regions represented by the capital letter of the four different narcotics in focus. (Right) The same chip showing hits for ectasy and herion in the cocktail. Both images are obtained in imaging surface plasmon resonance mode     

A light-activated probe of intracellular protein kinase activity

The first example of a photoactivated probe of intracellular enzymatic activity is described. The caged derivative of a fluorescent protein kinase C peptide-based sensor was prepared by modifying the free hydroxyl group of a phosphorylatable serine moiety with a photolabile appendage that blocks phosphoryl transfer. We have demonstrated that the caged sensor allows one to (1) sample PKC activity with exquisite temporal precision, (2) control the relative amount of active sensor available for phosphorylation, and (3) examine protein kinase activity at multiple time points.     

A peptide aldehyde microarray for high-throughput profiling of cellular events

Microarrays provide exciting opportunities in the field of large-scale proteomics. With the aim to elucidate enzymatic activity and profiles within native biological samples, we developed a microarray comprising a focused positional-scanning library of enzyme inhibitors. The library was diversified across P(1)-P(4) positions, creating 270 different inhibitor sublibraries which were immobilized onto avidin slides. The peptide aldehyde-based small-molecule microarray (SMM) specifically targeted cysteine proteases, thereby enabling large-scale functional assessment of this subgroup of proteases, within fluorescently labeled samples, including pure proteins, cellular lysates, and infected samples. The arrays were shown to elicit binding fingerprints consistent with those of model proteins, specifically caspases and purified cysteine proteases from parasites (rhodesein and cruzain). When tested against lysates from apoptotic Hela and red blood cells infected with Plasmodium falciparum, clear signatures were obtained that were readily attributable to the activity of constituent proteases within these samples. Characteristic binding profiles were further able to distinguish various stages of the parasite infection in erythrocyte lysates. By converting one of our brightest microarray hits into a probe, putative protein markers were identified and pulled down from within apoptotic Hela lysates, demonstrating the potential of target validation and discovery. Taken together, these results demonstrate the utility of targeted SMMs in dissecting cellular biology in complex proteomic samples.     

Photocleavable peptide hydrogel arrays for MALDI-TOF analysis of kinase activity

We have developed an acrylamide copolymerization strategy to immobilize acrylamide labeled peptides and proteins into a hydrogel surface and detect their modifications using MALDI-TOF mass spectrometry. Copolymerization into hydrogels is robust, compatible with "off-the-shelf" chemistry, and yields materials and surfaces that are stable to aqueous or organic solvents, drying, high or low temperature, high or low pH, oxidizing agents, sonication, mechanical contact, etc. The use of acrylamide hydrogels allows immobilization of substrates in a hydrated environment that can be used both as a biological reaction matrix and as a MALDI target. In our strategy, a substrate peptide was designed in a modular fashion to include both modification site and affinity domains. It was labeled with an acrylamide functionality using a generalized chemistry and covalently attached to the surface with a photocleavable linker, allowing for aggressive washing to remove any fouling, followed by selective release for MALDI-TOF analysis. Using this system we were able to analyze and compare v-Abl (truncated) and c-Abl (full-length) kinase activity on a peptide substrate with an affinity domain specific for the full-length kinase, observing excellent overall reproducibility in the extent of phosphorylation detected. This work serves as proof of principle for modular substrate design strategies for mass spectrometry-readable biosensors.     

Cell detection and counting through cell lysate impedance spectroscopy in microfluidic devices

Cell-based microfluidic devices have attracted interest for a wide range of applications. While optical cell counting and flow cytometry-type devices have been reported extensively, sensitive and efficient non-optical methods to detect and quantify cells attached over large surface areas within microdevices are generally lacking. We describe an electrical method for counting cells based on the measurement of changes in conductivity of the surrounding medium due to ions released from surface-immobilized cells within a microfluidic channel. Immobilized cells are lysed using a low conductivity, hypotonic media and the resulting change in impedance is measured using surface patterned electrodes to detect and quantify the number of cells. We found that the bulk solution conductance increases linearly with the number of isolated cells contributing to solution ion concentration. The method of cell lysate impedance spectroscopy is sensitive enough to detect 20 cells microL(-1), and offers a simple and efficient method for detecting and enumerating cells within microfluidic devices for many applications including measurement of CD4 cell counts in HIV patients in resource-limited settings. To our knowledge, this is the most sensitive approach using non-optical setups to enumerate immobilized cells. The microfluidic device, capable of isolating specific cell types from a complex bio-fluidic and quantifying cell number, can serve as a single use cartridge for a hand-held instrument to provide simple, fast and affordable cell counting in point-of-care settings.     

Development of a fluorescence peptide chip for the detection of caspase activity

Proteases play a key role in cell functions, and it is very important to monitor their activities for drug screening and diagnosis of diseases. In the present study, a new class of fluorescence probe, into which a fluorophore and a quencher have been introduced, was developed and applied to the on-chip detection of caspase-3 activity. This probe is non fluorescent in the absence of caspase-3. However, when it is treated with active caspase-3, the fluorescence intensity increases dependent on the caspase-3 activity due to the cleavage of the quencher-containing moiety on a glass slide. This caspase-dependent increase in the fluorescence intensity was also detected when the glass slide immobilizing the probe peptide was treated with cell lysate stimulated by staurosporine (STP), which is an apoptosis-inducing agent. On the other hand, such an increase was not detected in the case of control cell lysate without STP-stimulation. The developed system is a rapid and sensitive method and is useful for the direct measurement of protease activity on a glass array.     

A handy detection cell for end-column electrochemical detection in capillary electrophoresis.

A handy and simple detection cell was constructed using a mixing joint for end-column electrochemical detection in capillary electrophoresis (CE). The cell allows for positioning of the working electrode at the end of the separation capillary without the aid of micropositioners. The design facilitates the exchange of electrodes and capillaries without the need to refabricate the entire capillary-electrode setup. The cell can be assembled in a short period of time. Alignment with the joint screw proved to be reproducible for working electrodes of copper and gold. The advantages of reduced time and low cost make the device very attractive for the routine analysis of electroactive species, such as carbohydrates and their derivatives, purine bases and nucleosides, amino acids, and catecholamines etc. by CE with electrochemical detection.     

Using a silver-enhanced microarray sandwich structure to improve SERS sensitivity for protein detection

A simple and sensitive method, based on surface-enhanced Raman scattering (SERS), for immunoassay and label-free protein detection is reported. A series of bowl-shaped silver cavity arrays were fabricated by electrodeposition using a self-assembled polystyrene spheres template. The reflection spectra of these cavity arrays were recorded as a function of film thickness, and then correlated with SERS enhancement using sodium thiophenolate as the probe molecule. The results reveal that SERS enhancement can be maximized when the frequency of both the incident laser and the Raman scattering approach the frequency of the localized surface plasmon resonance. The optimized array was then used as the bottom layer of a silver nanoparticle–protein–bowl-shaped silver cavity array sandwich. The second layer of silver was introduced by the interactions between the proteins in the middle layer of the sandwich architecture and silver nanoparticles. Human IgG bound to the surface of this microcavity array can retain its recognition function. With the Raman reporter molecules labeled on the antibody, a detection limit down to 0.1 ng mL^?1 for human IgG is easily achieved. Furthermore, the SERS spectra of label-free proteins (catalase, cytochrome C, avidin and lysozyme) from the assembled sandwich have excellent reproducibility and high quality. The results reveal that the proposed approach has potential for use in qualitative and quantitative detection of biomolecules.

A dansylated peptide for the selective detection of copper ions

A new peptidyl fluorescent chemosensor for the selective detection of copper ions was studied.     

A chemical inhibitor reveals the role of Raf kinase inhibitor protein in cell migration

Raf kinase inhibitor protein (RKIP) is a modulator of cell signaling that functions as an endogenous inhibitor of multiple kinases. We demonstrate here a positive role for RKIP in the regulation of cell locomotion. We discovered that RKIP is the relevant cellular target of locostatin, a cell migration inhibitor. Locostatin abrogates RKIP's ability to bind and inhibit Raf-1 kinase, and it acts by disrupting a protein-protein interaction, an uncommon mode of action for a small molecule. Small interfering RNA-mediated silencing of RKIP expression also reduces cell migration rate. Overexpression of RKIP converts epithelial cells to a highly migratory fibroblast-like phenotype, with dramatic reduction in the sensitivity of cells to locostatin. RKIP is therefore the compound's valid target and a key regulator of cell motility.