首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Cellulose/chitosan composites were successfully prepared in a new and basic-based solvent system, ethylene diamine/potassium thiocyanate (EDA/KSCN), by dissolving cellulose and chitosan in 70/30 (w/w) EDA/KSCN at ?19 °C, and then coagulating in methanol. Wide angle X-ray diffraction studies revealed that the EDA/KSCN solvent system is capable of disrupting the hydrogen bonds in both cellulose and chitosan and increase the amorphous regions. Stability tests proved that the composites are stable in acidic aqueous solution due to the hydrogen bonds formed between cellulose and chitosan. This is the first time to dissolve chitosan in a basic-based solvent system and prepare cellulose/chitosan composites in a straightforward way. The adsorption of heavy metal ions (Cu2+, Cd2+, and Pb2+) onto the cellulose/chitosan composites was investigated. The adsorption capacity is highly dependent on pH and the maximum metal uptake was obtained at pH 5.0. Increasing initial metal concentration enhanced the diffusion of metal ions to the composite surface and therefore the metal removal efficiency. Higher percentage of chitosan in the composites also led to higher metal adsorption. The results indicated that the prepared cellulose/chitosan (1:1) composite can adsorb 0.53 mmol/g Cu2+, 0.28 mmol/g Cd2+ and 0.16 mmol/g Pb2+ ions at pH 5.0. The Freundlich model and the pseudo-second-order model were in good agreement with the adsorption isotherms and kinetics, respectively. X-ray photoelectron spectroscopy studies indicated that the binding of heavy metal ions is attributed to the nitrogen atoms of amino groups in chitosan. The composites can be reused for metal removal.  相似文献   

2.
Adsorption of chromium from aqueous solution using chitosan beads   总被引:1,自引:0,他引:1  
A basic investigation on the removal of Cr(III) and Cr(VI) ions from aqueous solution by chitosan beads was conducted in a batch adsorption system. The chitosan beads were prepared by casting an acidic chitosan solution into an alkaline solution. The influence of different experimental parameters; pH, agitation period and different concentration of Cr(III) and Cr(VI) ions was evaluated. A pH 5.0 was found to be an optimum pH for Cr(III) adsorption, and meanwhile pH 3.0 was the optimum pH for the adsorption of Cr(VI) onto chitosan beads. The Langmuir and Freundlich adsorption isotherm models were applied to describe the isotherms and isotherm constants for the adsorption of Cr(III) and Cr(VI) onto chitosan beads. Results indicated that Cr(III) and Cr(VI) uptake could be described by the Langmuir adsorption model. The maximum adsorption capacities of Cr(III) and Cr(VI) ions onto chitosan beads were 30.03 and 76.92 mg g−1, respectively. Results showed that chitosan beads are favourable adsorbents. The Cr(III) and Cr(VI) ions can be removed from the chitosan beads by treatment with an aqueous EDTA solution.  相似文献   

3.
《印度化学会志》2021,98(8):100111
A facile magnetic chitosan composite used for heavy metal ions removal was prepared. The adsorbents with large specific area and rich carboxyl groups exhibited good removal of Cd(II) ions and could be easily separated with magnetic separation. The adsorption capacity of Cd(II) was 48 ​mg ​g−1 and the removal efficiency reached 86.7% after five cycles. Thus, the prepared magnetic chitosan composite could act as a potential adsorbent for Cd(II) ions removal.  相似文献   

4.

A method of obtaining multipurpose magnetic chitin, which combines the magnetic properties of magnetite and the adsorption properties of polysaccharide, was proposed. The possibility of using chitin-(CT) and chitosan (CS)-containing magnetic composites for the adsorption of inorganic ions CoII and CrVI and organic substances (2- and 4-nitrophenols) from aqueous media was analyzed. It was shown that the adsorption capacity of magnetic chitin with respect to CoII and CrVI ions reached 41 mg g?1 and 15 mg g?1, respectively. The maximum adsorption capacity for 4-nitrophenol (19 mg g?1 per CT-containing magnetic composite or 56 mg g?1 per chitin component) was about three times higher than for 2-nitrophenol. The obtained adsorbent Fe3O4/CT is environmentally friendly and reusable.

  相似文献   

5.
The composite ion exchangers were tested for their ability to remove UO2 2+ from aqueous solutions. Polyacrylonitrile (PAN) composites having natural zeolite, clinoptilolite, and synthetic zeolite, zeolite X, were used as an adsorbents. The influences of pH, U(VI) concentration, temperature and contact time on the sorption behavior of U(VI) were investigated in order to gain a macroscopic understanding of the sorption mechanism. The optimum adsorption conditions were determined for two composites. The sorption behaviors of uranium on both composites from aqueous systems have been studied by batch technique. Parameters on desorption were also investigated to recover the adsorbed uranium.  相似文献   

6.
The study explores the potential of cellulose nanocrystals (CNC), cellulose nanofibers (CNF) and chitin nanocrystals (ChNC) isolated from bioresidues to remove silver ions from contaminated water. Zeta sizer studies showed negatively charged surfaces for CNC and CNF isolated from cellulose sludge in the acidic and alkaline pHs, whereas ChNC isolated from crab shell residue showed either positive or negative charges depending on pH conditions. Model water containing silver ions showed a decrease in Ag+ ion concentration (measured by inductively coupled plasma-optical emission spectrometer; inductively coupled plasma mass spectrometry), after treatment with CNC, CNF and ChNC suspensions. The highest Ag+ ion removal was measured near neutral pH for CNC, being 34.4 mg/g, corresponding to 64 % removal. ChNC showed 37 % and CNF showed 27 % removal of silver ions. The WDX (wavelength dispersive X-ray analysis) and XPS (X-ray photoelectron spectroscopy) analysis confirmed the presence of silver ions on the surface of the nanocellulose and nanochitin after adsorption. Surface adsorption on the nanoparticles via electrostatic interactions is considered to be the prominent mechanism of heavy metal ion capture from aqueous medium, with CNC with negative surface charge and negatively charged functional groups being most favourable for the adsorption of positively charged Ag+ ions compared to other native bionanomaterials.  相似文献   

7.
Summary: Zeolite-chitosan composites have been prepared by encapsulation of zeolites by a gelling solution of chitosan or by in-situ synthesis of zeolites inside a chitosan gel. The preparation of the composite implies modifications of both components. Zeolites are dealuminated by the acid solution in which chitosan is dissolved and the morphology of the chitosan fibrils is stabilized by iniorganic species issued from the dealumination of the zeolites or from their synthesis medium. Zeolite-bearing chitosan xerogels present surface area and porosity similar to the textural properties of chitosan aerogels.  相似文献   

8.
The adsorption of Pb(II) ions from aqueous solutions by chitosan flakes and beads was studied. The chitosan beads were prepared by casting an acidic chitosan solution into alkaline solution. Experiments were carried out as a function of pH, agitation period and initial concentration of Pb2+ ions. The uptake of Pb2+ ions from aqueous solution was determined from changes in concentration as measured by atomic absorption spectroscopy. The maximum uptake of Pb2+ ions on chitosan beads was greater than that on chitosan flakes. Adsorption isothermal data could be interpreted by the Langmuir equation. The experimental data of the adsorption equilibrium from Pb2+ ion solutions correlated well with the Langmuir isotherm equation. SEM analyses were also conducted for visual examination of the chitosan flakes and beads. Physical properties including surface area and average pore diameter were characterized by N2 adsorption experiment.  相似文献   

9.
Muzzarelli RA  Tubertini O 《Talanta》1969,16(12):1571-1577
The rates of adsorption of several metal ions on chitin and chitosan in water and sea-water have been measured; chitin and chitosan are proposed as Chromatographic chelating supports. These natural polymers are also suitable for recovery of trace metals from sea-water.  相似文献   

10.
重金属离子对生态环境以及人类健康造成了严重的危害,因此处理水体中的重金属离子迫在眉睫。采用共沉淀法,以乙基纤维素为模版,将四氧化三铁(Fe3O4)纳米颗粒与乙基纤维素复合,制备了乙基纤维素磁性复合材料(EC/Fe3O4)。探究了吸附添加量、溶液pH值和吸附时间等因素对溶液中Cu(Ⅱ)吸附过程的影响。结果表明,EC/Fe3O4表现出良好的吸附速率和吸附性能。吸附4 min,可达到吸附平衡状态。在Cu(Ⅱ)浓度为20 mg/L,pH=7,吸附时间为160 min条件下,EC/Fe3O4的单位吸附量qe为76.98 mg/g,最大去除率为94.68%。在经过8次吸附循环后,单位吸附量为62.21 mg/g。  相似文献   

11.
Biobased nanofibers are increasingly considered in purification technologies due to their high mechanical properties, high specific surface area, versatile surface chemistry and natural abundance. In this work, cellulose and chitin nanofibers functionalized with carboxylate entities have been prepared from pulp residue (i.e., a waste product from the pulp and paper production) and crab shells, respectively, by chemically modifying the initial raw materials with the 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) mediated oxidation reaction followed by mechanical disintegration. A thorough investigation has first been carried out in order to evaluate the copper(II) adsorption capacity of the oxidized nanofibers. UV spectrophotometry, X-ray photoelectron spectroscopy and wavelength dispersive X-rays analysis have been employed as characterization tools for this purpose. Pristine nanofibers presented a relatively low content of negative charges on their surface thus adsorbing a low amount of copper(II). The copper adsorption capacity of the nanofibers was enhanced due to the oxidation treatment since the carboxylate groups introduced on the nanofibers surface constituted negative sites for electrostatic attraction of copper ions (Cu2+). The increase in copper adsorption on the nanofibers correlated both with the pH and carboxylate content and reached maximum values of 135 and 55 mg g?1 for highly oxidized cellulose and chitin nanofibers, respectively. Furthermore, the metal ions could be easily removed from the contaminated nanofibers through a washing procedure in acidic water. Finally, the adsorption capacity of oxidized cellulose nanofibers for other metal ions, such as nickel(II), chromium(III) and zinc(II), was also demonstrated. We conclude that TEMPO oxidized biobased nanofibers from waste resources represent an inexpensive and efficient alternative to classical sorbents for heavy metal ions removal from contaminated water.  相似文献   

12.
Proteases constitute one of the most important groups of industrial enzymes, accounting for at least 25% of the total enzyme sales, with two-thirds of the proteases produced commercially being of microbial origin (1). Immobilized enzymes are currently the subject of considerable interest because of their advantages over soluble enzymes or alternative, technologies, and the steadily increasing number of applications for immobilized enzymes. The general application of immobilized proteins and enzymes has played a central role in the expansion of biotechnology and synthesis-related industries. Proteases have been immobilized on natural and synthetic supports (2,3). In the present work, a protease from Bacillus polymyxa was partially purified with 80% ammonium sulfate precipitation followed by dialysis and chromatography using a diethylaminoethyl (DEAE)-cellulose ion exchange column. Immobilization was evaluated by using different adsorbents (chitin, chitosan, alginate, synthetic zeolite, and raw zeolite) and the storage stability and recycle of the immobilized protease determined. Immobilization yields were estimated to be 96% and 7.5%, by using alginate and chitosan, respectively, after, 24 h. The yield of the immobilization was 17% for alginate at 16h and the enzyme did not adsorb on the chitin, chitosan, synthetic zeolite, and raw zeolite.  相似文献   

13.
Nitrogen-containing cellulose derivatives hydrazinodeoxycellulose (HDC) and carboxyalkyl hydrazinodeoxycelluloses (α- and β-CAHDCs) were prepared from 6-chlorodeoxycellulose (CDC). Their adsorption of divalent transition metal ions was determined from dilute aqueous solutions and compared with that of aminoalkyl celluloses (AmACs) reported previously. HDC scarcely adsorbs metal ions in the pH range of 1–2, whereas α- and β-CAHDCs adsorb metal ions in this pH range. However, the adsorption of metal ions on HDC increases rapidly with increasing pH and HDC more effectively adsorbs metal ions than α- and β-CAHDCs in weakly acidic conditions. The ability to adsorb Cu2+ ions was in the order of AmAC (carbon number in the diamine moiety m = 2) > HDC > α-CAHDC > β-CAHDC in the weakly acidic region. These adsorbents selectively adsorb Cu2+ ions from the solutions containing other metal ions such as Mn2+, Co2+, and Ni2+, and the Irving–Williams series is obeyed in these adsorbent/metal ion systems. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3359–3363, 1997  相似文献   

14.
Environmental pollution and energy crisis are two major global challenges to human beings.Recovering energy from wastewater is considered to be one of the effective approaches to address these two issues synchronously.As the main pollutants in wastewater,toxic heavy metal ions are the potential candidates for energy storage devices with pseudocapacitive behaviors.In this study,toxic metal ions of Cr(VI)and Cu(II)are removed efficiently by chitosan coated oxygen-containing functional carbon nanotubes,and the corresponding equilibrium adsorption capacity is 142.1 and 123.7 mg g~(-1).Followed by carbonization of metal ions-adsorbed adsorbents,Cu-and Cr N-loaded carbon composites can be obtained.Electrochemical measurements show that the supercapacitor electrodes based on Cu-and Cr N-loaded carbon composites have specific capacitance of 144.9 and 114.9 F g~(-1)at2 m V s~(-1),with superior electrochemical properties to pure chitosan coated carbon nanotubes after carbonization.This work demonstrates a new strategy for the resource-utilization of other heavy metal ions for energy devices,and also provides a new way to turn environmental pollutants into clean energy.  相似文献   

15.
Dye and heavy metal contaminants are mainly aquatic pollutants. Although many materials and methods have been developed to remove these pollutants from water, effective and cheap materials and methods are still challenging. In this study, highly porous hydroxyapatite/graphene oxide/chitosan beads (HGC) were prepared by a facile one-step method and investigated as efficient adsorbents. The prepared beads showed a high porosity and low bulk density. SEM images indicated that the hydroxyapatite (HA) nanoparticles and graphene oxide (GO) nanosheets were well dispersed on the CTS matrix. FT-IR spectra confirmed good incorporation of the three components. The adsorption behavior of the obtained beads to methylene blue (MB) and copper ions was investigated, including the effect of the contact time, pH medium, dye/metal ion initial concentration, and recycle ability. The HGC beads showed rapid adsorption, high capacity, and easy separation and reused due to the porous characteristics of GO sheets and HA nanoparticles as well as the rich negative charges of the chitosan (CTS) matrix. The maximum sorption capacities of the HGC beads were 99.00 and 256.41 mg g−1 for MB and copper ions removal, respectively.  相似文献   

16.
Copper and mercury ion adsorption on chitosan membranes was investigated in batch systems (with both single and binary solutions). The Langmuir model and its extensions (extended Langmuir, Jain-Snoeyink, and Langmuir-Freundlich models) were tested for the modeling of experimental data. Chitosan membranes presented more affinity for Hg ions than for Cu ions. The decrease of the amount of metal adsorbed on natural chitosan in binary systems (compared to single-metal solutions) showed the competition effects between the two metal ions. For glutaraldehyde-crosslinked chitosan and epichlorohydrin-crosslinked chitosan, the mixture effect was present, producing unexpected result such as higher adsorption capacities, when compared to the monocomponent solution of each metal. The desorption of the metals was also investigated, and copper and mercury ions could be selectively recovered using a combined process by using NaCl and H2SO4 as eluant.  相似文献   

17.
The ability of chitosan to form complexes with bivalent metal ions has been broadly explored in the literature. The present work investigates the influence of functionalization of macroporous chitosan membranes with histidine on their ability to remove copper ions from aqueous solution in the range of pH 4–6. The maximum adsorption capacity for Cu(II) ion was 2.5 mmol metal/g pristine chitosan membranes. Under this condition, no influence of membrane porosity was observed. However, for membranes with immobilized histidine, the porosity was shown to be a factor that affects the maximum adsorption capacity, with values ranging from 2.0 to 3.0 mmol metal/g chitosan. These results indicate that the immobilization of histidine on porous chitosan membranes presents synergy with porosity in the ability to complex Cu(II) ions. This synergy may be negative or positive, depending on the initial membrane porosity.  相似文献   

18.
The increased global concern on environmental protection has made researchers focus their attention on new and more efficient methods of pollutant removal. In this research, novel nanocomposite adsorbents,i.e., magnetic hydroxyapatite (Fe3O4@HA) and magnetic hydroxyapatite β‐cyclodextrin (Fe3O4@HA‐CD) were synthesized and used for heavy metal removal. The adsorbents were characterized by FTIR, XRD, TGA, VSM, and SEM. In order to investigate the effect of β‐cyclodextrin (β‐CD) removal efficiency, adsorption results of nine metal ions were compared for both adsorbents. β‐CD showed the most increasing effect for Cd2+ and Cu2+ removal, so these two ions were selected for further studies. The effect of diverse parameters including pH, contact time, initial metal ion concentration and adsorbent dosage on the adsorption process was discussed. The optimum pH was 6 and adsorption equilibrium was achieved after 1 hr. Adsorption kinetic data were well fitted by pseudo‐second‐order model proposing that metal ions were adsorbed via chemical reaction. Adsorption isotherm was best described by the Langmuir model, and maximum adsorption capacity for Cd2+ and Cu2+ was 100.00 and 66.66 (mg/g), respectively. Desorption experiment was also done, and the most efficient eluent used for desorption of metal ions was EDTA (0.001 M) with 91% and 88% of Cd2+ and Cu2+ release, respectively. Recyclability studies also showed a 19% decrease in the adsorption capacity of the adsorbent after five cycles of regeneration. Therefore, the synthesized adsorbents were recognized as potential candidates for heavy metal adsorption applications.  相似文献   

19.
Chitosan is derived from chitin by deacetylation. Chitosan forms a complex with metal ions and is soluble an organic acid. The metal ions were concentrated in the precipitates of chitosan when the sample solution containing metal ions was adjusted to neutral after the chitosan solution was added. These properties are applied to the preconcentration of metal ions in water samples and their determination by graphite furnace atomic absorption spectrometry. Metal ions,such as ruthenium, indium, vanadium, strontium,rhodium were collected in the chitosan precipitates.  相似文献   

20.
基于壳聚糖及其衍生物的金属离子吸附剂的研究进展   总被引:27,自引:0,他引:27  
综述了近年来以壳聚糖和壳聚糖衍生物为原料的金属离子吸附剂的研究进展.重点介绍了壳聚糖及其衍生物的交联和功能化反应,以及交联后的树脂对多种金属离子的吸附情况.常用的交联剂包括戊二醛、甲醛及环氧氟丙烷,(聚)乙二醇双缩水甘油醚等,壳聚糖树脂的功能化主要包括向其中引入冠醚、羧甲基等功能团,其中羧甲基化是最常用最有效的方法.另外,还介绍了金属离子模板壳聚糖树脂以及基于壳聚糖衍生物的蛇笼树脂的合成。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号