笼形倍半硅氧烷修饰的金纳米粒子对4-正戊基4'-氰基联苯液晶性能的影响

为有效降低液晶器件的开启电压,获得具有低功耗特性的液晶显示器件。本文采用巯基功能化的笼形倍半硅氧烷(POSS)作为修饰配体,硼氢化钠为还原剂,采用一步法还原氯金酸制备出粒径约为5 nm的金纳米粒子。将该金纳米粒子以不同质量分数掺杂到向列相液晶4-正戊基4'-氰基联苯(5CB)中,研究了其对液晶黏度、阈值电压、相变温度的影响。结果表明,POSS修饰的金纳米粒子可以使液晶材料5CB的黏度降低、阈值电压减小。该金纳米粒子的掺入,拓宽了液晶材料的相变温度范围。     

松果状纳米氧化铁对液晶电光性能的影响

液晶材料被广泛应用于液晶显示器(LCD)中,但是由于液晶中杂质的存在,导致液晶的应用电压变大,增加了能耗。 为了降低应用中的阈值电压和饱和电压,通常向液晶中添加纳米颗粒来提高电光性能。 本文采用简单的化学沉淀法制备了形貌均一,大小尺寸均匀的松果状氧化铁(P-Fe₂O₃)纳米颗粒。 将其掺杂到向列相液晶4-氰基-4'-戊基联苯(4-cyano-4'-pentylbiphenyl,5CB)中,结果表明,掺杂质量分数为0.5%时,电光性能达到最优,阈值电压和饱和电压分别降低24.8%和45.2%,对比度增大46%,响应时间降低至17.6 ms,此性能优于相同条件下掺杂普通Fe₂O₃纳米颗粒的向列相液晶5CB,其阈值电压和饱和电压分别降低15%和16%。 这归因于松果状Fe₂O₃纳米颗粒可以在向列相液晶5CB中均匀分散,其粗糙的表面吸附了液晶中的杂质离子,减少了杂质离子的屏蔽效应,从而提高了电光性能。     

Magnetic field induced Freedericksz transition of a planar aligned liquid crystal doped with metalloporphyrins FeTPPCl,MnTPPCl and ZnTPP

We observed that the planar aligned nematic liquid crystal (5CB) doped with a volume fraction of 1% of FeTPPCl [5,10,15,20-tetraphenylporphyriniron(III)chloride] or MnTPPCl [5,10,15,20-tetraphenylporphyrinmanganese(III)chloride] dramatically decreased the critical magnetic field for the magnetic field induced Freedericksz transition, while 5CB doped with ZnTPP [5,10,15,20-tetraphenylporphyrinzinc(II)] revealed no such effect, when compared with pure 5CB. In the guest-host (5CB) system, FeTPPCl and MnTPPCl as guests are both strong paramagnetic materials with an interaction through coordination of the -CN group in 5CB onto the metal ion of the porphyrin. As a result, the 5CB molecules are dragged to reorientate under a static magnetic field, while ZnTPP is a diamagnetic material without such a property. This phenomenon concerning magneto-optical components could be useful in liquid crystal displays.     

Magnetic field induced Freedericksz transition of a planar aligned liquid crystal doped with metalloporphyrins FeTPPCl, MnTPPCl and ZnTPP

We observed that the planar aligned nematic liquid crystal (5CB) doped with a volume fraction of 1% of FeTPPCl [5,10,15,20-tetraphenylporphyriniron(III)chloride] or MnTPPCl [5,10,15,20-tetraphenylporphyrinmanganese(III)chloride] dramatically decreased the critical magnetic field for the magnetic field induced Freedericksz transition, while 5CB doped with ZnTPP [5,10,15,20-tetraphenylporphyrinzinc(II)] revealed no such effect, when compared with pure 5CB. In the guest-host (5CB) system, FeTPPCl and MnTPPCl as guests are both strong paramagnetic materials with an interaction through coordination of the -CN group in 5CB onto the metal ion of the porphyrin. As a result, the 5CB molecules are dragged to reorientate under a static magnetic field, while ZnTPP is a diamagnetic material without such a property. This phenomenon concerning magneto-optical components could be useful in liquid crystal displays.     

Structure peculiarities and optical properties of nanocomposite: 5CB liquid crystal–CTAB-modified montmorillonite clay

The effects of the modification of natural layered montmorillonite (MMT) clay by cetyltrimethylammonium bromide (CTAB) cations on the structure and optical properties of the composite material based on this mineral (4.5%mass) and a nematic liquid crystal (LC), 4-pentyl-4'-cyanobiphenyl (5CB), have been investigated. As shown by small-angle X-ray diffraction and infrared (IR) spectroscopy experiments, this modification results in a significant expansion of the interplane spaces in the MMT nanoparticles and a considerable growth of their surface affinity to the 5CB molecules, which allows the LC molecules to penetrate into the MMT galleries and additionally expand these galleries. According to IR studies, this heterosystem possesses van der Waals interactions between its components on the phase separation boundary and, as a result, orientation alignment of the molecules in the near-surface layers occurs. These interactions specify the electro-optical properties of the composite. When an electric field is applied to a system, the light transmittance of the material increases due to the induced orientation of the LC dimers. This LC ordering remains even after the voltage is shut off, i.e. the system shows an electro-optical memory effect.     

ITO-free transparent conductive films based on carbon nanomaterials with metal grid for liquid crystal displays

Carbon nanomaterials with metal grids were used as transparent conductive electrodes for liquid crystal displays (LCDs) to develop an indium tin oxide (ITO)-free device. We prepared LCDs with CNTs and graphene electrodes; however, the working voltage of the device with the CNT electrodes was high. The device with graphene electrodes had good performance, but not as good as devices with ITO electrodes. To improve the device performance, we applied a metal grid to the carbon nanomaterial to create low sheet-resistance transparent electrodes. The device with the graphene and metal grid transparent electrodes had a threshold voltage as low as 0.23 V/µm, which is similar to that of typical LCDs with ITO electrodes. The results show that a hybrid transparent conductive film with graphene and metal grid could be an alternative to ITO for developing ITO-free LCDs.     

Kinetics of induced crystallization of the LC(1-x)Sil(x) system

This study explores the kinetics of a new feature, called "induced crystallization (IC)", observed in an Aerosil dispersed octylcyanobiphenyl (8CB) liquid crystal system. Heating rate dependent experiments were performed using modulation differential scanning calorimetry (MDSC) at various heating ramp rates. In the presence of Aerosil nanoparticles, a well-defined exothermic peak was found as an additional feature on the heating scan before the melting transition, which was absent in the bulk 8CB; hence, we like to call it an "IC" as it is induced by Aerosil nanoparticles in the system. The system LC1-xSilx was prepared by mixing Aerosil nanoparticles in the bulk 8CB by the solvent dispersion method (SDM) where LC represents bulk 8CB and Sil represents Aerosil nanoparticles with x as the Aerosil fraction. The concentration of the Aerosil nanoparticles (x) varied from 0 to 0.2 g/cm3 in the bulk 8CB. The IC transition peak showed a temperature shift and change in the shape and size in the presence of Aerosil nanoparticles. In addition, this transition shifted significantly with different heating ramp rates following an Arrhenius behavior showing activated kinetics. The presence of Aerosil nanoparticles caused a significant increase in the enthalpy and decrease in the activation energy for the IC transition as the density of Aerosil nanoparticles increases and showed a saturation for the highest density of Aerosil nanoparticles. This behavior can be explained in terms of molecular disorder and surface molecular interaction induced by adding Aerosil nanoparticles into the bulk of 8CB liquid crystal.     

Frequency‐Driven Self‐Organized Helical Superstructures Loaded with Mesogen‐Grafted Silica Nanoparticles

Adding colloidal nanoparticles into liquid‐crystal media has become a promising pathway either to enhance or to introduce novel properties for improved device performance. Here we designed and synthesized new colloidal hybrid silica nanoparticles passivated with a mesogenic monolayer on the surface to facilitate their organo‐solubility and compatibility in a liquid‐crystal host. The resulting nanoparticles were identified by ¹H NMR spectroscopy, TEM, TGA, and UV/Vis techniques, and the hybrid nanoparticles were doped into a dual‐frequency cholesteric liquid‐crystal host to appraise both their compatibility with the host and the effect of the doping concentration on their electro‐optical properties. Interestingly, the silica‐nanoparticle‐doped liquid‐crystalline nanocomposites were found to be able to dynamically self‐organize into a helical configuration and exhibit multi‐stability, that is, homeotropic (transparent), focal conic (opaque), and planar states (partially transparent), depending on the frequency applied at sustained low voltage. Significantly, a higher contrast ratio between the transparent state and scattering state was accomplished in the nanoparticle‐embedded liquid‐crystal systems.     

Role of aerosil dispersion on the activated kinetics of the LC1-xSilx system

This study explores the role of aerosil dispersion on activated phase transitions of bulk octylcyanobiphenyl (8CB) liquid crystals by performing heating rate-dependent experiments. Differential scanning calorimetry (DSC) was used at various heating ramp rates in order to probe the activated phase dynamics of the system. The system, LC1-xSilx, was prepared by mixing aerosil nanoparticles (7 nm in diameter) in the bulk 8CB by the solvent dispersion method (SDM). LC represents bulk 8CB, and Sil represents aerosil nanoparticles with concentration x in percent. The concentration of the aerosil nanoparticles (x) varied from 0 to 0.2 g/cm3 in the bulk 8CB. Well-defined, endothermic peaks were found on a heating scan at melting and at the smectic-A to nematic (SmA-N) and nematic to isotropic (N-I) transitions. These peaks show a temperature shift and a change in their shapes and sizes in the presence of aerosil nanoparticles. In addition, an exothermic peak also appeared before the melting peak during the heating scan in the presence of aerosil nanoparticles. All transitions shifted significantly with different heating ramp rates, following an Arrhenius behavior, showing activated kinetics. The presence of aerosil nanoparticles caused a significant increase in the enthalpy and a decrease in the activation energy compared to the results found in bulk 8CB. This behavior can be explained by aerosil dispersion in the LC1-xSilx, inducing a disorder in the bulk 8CB. Infrared (IR) spectroscopy shows a shift to higher frequency for the broad peak at 1082 cm-1, corresponding to an Si-O bond as the density of the aerosil increases, and can be explained in terms of surface and molecular interactions between aerosil nanoparticles and 8CB liquid crystal molecules.     

Highly Efficient and Stable Palladium Nanoparticles Supported on an Ionic Liquid Silica Sol?Gel Modified Electrode

A carbon ionic liquid electrode modified with a thin layer of silica sol? gel containing phosphinite ionic liquid was prepared for deposition of palladium nanoparticles. Palladium nanoparticles were formed easily by simple contact of the modified electrode with palladium chloride solution. The novel material overcomes the shortcomings of conventionally modified electrodes with a thin layer of silica sol? gel, due to the existence of ionic liquid in silica matrix. A crack‐free sol? gel matrix was obtained and also, the uniform porous structure of the ionic liquid‐sol? gel matrix resulted in a fast mass transport and increased ionic conductivity. The electrode exhibits high electrocatalytic effects towards hydrazine and ascorbic acid. It is very stable against repetitive cycling in the applied potential window.     

Photoluminescence of a 5CB liquid crystal–organomontmorillonite nanoparticle heterocomposite

Photoluminescence (PL) of a heterocomposite, consisting of the nematic liquid crystal (LC) 4-pentyl-4´-cyanobiphenyl (5CB) and anisometric nanoparticles of montmorillonite (MMT) clay, modified by cetyltrimethylammonium bromide (CTAB) has been investigated at 4.2 and 300 K. The incorporation of this organoclay (B4) to 5CB decreases the emission intensity by 7–8 times due to efficient resonant quenching of the exciting energy by the organoclay. The spectrum shifts to a long-wave region, with this effect being considerably larger at low temperatures. Graphical separation of complex bands, corresponding to the bulk 5CB and 5СВ?+?В4 heterosystem at both temperatures revealed that the presence of the organoclay resulted in a significant growth of LC dimer quantity, shifting spectra towards longer wavelengths. Changes in the 5CB luminescence under organoclay influence can be explained by quite strong interphase interactions specified earlier by infrared spectroscopy between the MMT surface and LC, and by a realisation of more flat conformations of 5CB molecules. Confinement effects prevent full crystallisation of 5CB in the 5CB?+?B4 composite, and LC dimer structures located in the organoclay near-surface layers on the outer surface of the nanoparticles and inside its galleries remain in a larger amount, at low temperature, when compared to bulk 5CB. The remaining LC crystallises and photoluminescence from the 5CB monomers becomes intense.     

Effects of surface chemical properties of activated carbon modified by amino-fluorination for electric double-layer capacitor

We report the synthesis of colloidal nanoparticles with an internal structure forming a gel-like matrix. These nanoparticles are composed of low molecular weight liquid crystal (LC) 4-pentyl-4-cyanobiphenyl (5CB) encapsulated in an LC-based polymer network. Using nanoscopic mechanical analysis, we demonstrate the ability to independently tune the shape anisotropy and stiffness by varying, respectively, the 5CB concentration and the extent of the polymer cross-linking. Based on these data, a model is introduced to account for the effect of the polymer network on the mechanical properties, thus providing novel insight into the nanomechanics of these soft particles.     

Thermotropic behaviour of the complex liquid crystal system containing 8CB [4-cyano-4'-(<Emphasis Type="Italic">n</Emphasis>-octylbiphenyl)] and organic ferrofluid

Summary A ferronematic liquid crystal (FNLC) system containing 8CB (4-cyano-4'-[n-octylbiphenyl]) and magnetite particles was prepared by using the two steps method. The magnetite particles were dispersed in the organic (liquid crystalline) media by using toluene. However, the toluene affected the thermotropic and structural behaviour of the pure basic (8CB) substance, drastically. The product was stable as no any sedimentation and coagulation has been observed during several weeks after the preparation. However, the distribution of magnetite particles was found not to be homogeneous in the nm size range.     

Capped Bimetallic and Trimetallic Nanoparticles for Catalysis and Information Technology

Summary: Polymer-capped metal nanoparticles can be recognized as a kind of macromolecule-metal nanoparticle complexes. Here the preparations of the capped bimetallic and trimetallic nanoparticles, in which each particle contains two and three elements of metal, respectively, are presented. They may have a random alloy, a core/shell, or other kinds of structure depending on the preparation method and the combination of elements. The core/shell structure is advantageous to electronically control the activity of metal catalysts. The triple core/shell structured trimetallic nanoparticles were found to have higher catalytic activity than the corresponding monometallic and bimetallic nanoparticles in three cases. Capped metal nanoparticles were also used as a dopant to liquid crystals. Liquid crystal displays, fabricated by metal nanoparticle-doped liquid crystals, showed faster response than those without dopants. Bimetalization could increase the long-term stability in the doped liquid crystal displays. Thus, metal nanoparticles can improve the electronic display system, which occupies an important position in information technology. In addition, SmCo₅ nanomagnets were successfully prepared by a chemical method, possibly providing a new building block for information technology. The prepared SmCo₅ nanoparticles have a coercivity of 1500 Oe at room temperature. The bimetallic nanoparticles may open a new field in super-high-density magnetic memories.     

Dielectric analysis of the interaction of nematic liquid crystals with carbon nanotubes

Multi-walled carbon nanotubes (MWCNTs) have been shown to self-organise, and when added as a guest to form a nanocomposite, their director couples with an organic liquid crystal (LC) host. Here, effects of MWCNTs on the low-frequency dielectric properties and Fréedericksz transition of the LC 4-cyano-4?-pentylbiphenyl (5CB) are studied. Anti-parallel electro-optic cells were filled with nanocomposites at weight percent concentrations of MWCNT to 5CB of: 0 (neat), 0.01, 0.10, 0.20, and 0.50. Low concentration was chosen to minimise Van der Waals attraction normally responsible for aggregation of MWCNTs. Dielectric relaxation spectroscopy was used to study interactions between MWCNTs and 5CB at frequencies from 20 Hz to 1 MHz. We propose a mechanism based upon measurements of the complex dielectric function which suggests that MWCNTs act as a slow-moving boundary within the sample cell at low frequencies and low applied electric fields, where the MWCNTs reorient along with the 5CB LC molecules. At higher frequencies and larger applied electric fields, the 5CB molecules rotate about their long axes while motion of the MWCNTs is frozen out.     

The synthesis of mesoporous silicates containing bimetallic nanoparticles and magnetic properties of PtCo nanoparticles in silica

Using a one-pot approach employing true liquid crystal templating on neutral surfactants and simple metal salt precursors, mesostructured, mesoporous silicates have been prepared in which bimetallic nanoparticles are deposited; magnetic properties of PtCo systems so prepared are evaluated.     

Magnetite nanorod thermotropic liquid crystal colloids: Synthesis, optics and theory

We have developed a facile method for preparing magnetic nanoparticles which couple strongly with a liquid crystal (LC) matrix, with the aim of preparing ferronematic liquid crystal colloids for use in magneto-optical devices. Magnetite nanoparticles were prepared by oxidising colloidal Fe(OH)(2) with air in aqueous media, and were then subject to alkaline hydrothermal treatment with 10moldm(-3) NaOH at 100°C, transforming them into a polydisperse set of domain magnetite nanorods with maximal length ～500nm and typical diameter ～20nm. The nanorods were coated with 4-n-octyloxybiphenyl-4-carboxylic acid (OBPh) and suspended in nematic liquid crystal E7. As compared to the conventional oleic acid coating, this coating stabilizes LC-magnetic nanorod suspensions. The suspension acts as a ferronematic system, using the colloidal particles as intermediaries to amplify magnetic field-LC director interactions. The effective Frederiks magnetic threshold field of the magnetite nanorod-liquid crystal composite is reduced by 20% as compared to the undoped liquid crystal. In contrast with some previous work in this field, the magneto-optical effects are reproducible on time scales of months. Prospects for magnetically switched liquid crystal devices using these materials are good, but a method is required to synthesize single magnetic domain nanorods.     

Molecular dynamics and alignment studies of silica-filled 4-pentyl-4′-cyanobiphenyl (5CB) liquid crystal

A comprehensive study of the dielectric properties of 4-pentyl-4′-cyanobiphenyl (5CB) liquid crystal filled with silica particles (particle size 30–80 nm, concentration 2, 3, 5, 10 and 15 wt%). Dielectric spectroscopy in the frequency range 100 to 10 7 Hz was applied to investigate the influence of the filler on the dynamic behaviour of the liquid crystal molecules in both the nematic and isotropic phases. In this frequency range one relaxation process is observed (at f>10⁶ Hz). The dynamical behaviour of the 5CB liquid crystal is described by the Cole-Cole relaxation function. The temperature dependence of the relaxation time obeys the empirical Arrhenius equation. The activation energies are approximately 75 kJ mol¹ for the pure 5CB sample in the nematic phase and 50 kJ mol¹ for the 5 wt% silica-filled 5CB sample. These values are compared with the corresponding literature values. The reversible electro-mechanical response of these samples under the influence of an applied a.c. electric field is investigated.     

Alignment of liquid crystal molecules on oriented (E-CE)C/PAA films

A film of ethyl-cyanoethyl cellulose/polyacrylic acid, (E-CE)C/PAA, using an alignment layer of liquid crystal (5CB), was prepared by shearing and then photo-polymerization of an (E-CE)C/AA solution. The orientation of the (E-CE)C chains in the sheared film and the alignment of the 5CB molecules on the films were investigated by polarizing optical microscopy and FTIR. It was found that the (E-CE)C/PAA oriented film showed perfect alignment ability for the 5CB molecules. The director of the 5CB molecules on the oriented film does not lie along the orientation direction of the (E-CE)C main chains, but inclines to that of the (E-CE)C main chains. The direction of the 5CB molecular orientation on the (E-CE)C/PAA oriented film is influenced by the degree of orientation of the (E-CE)C chains in the oriented film.     

Alignment of a nematic liquid crystal using substituted calixarene Langmuir-Blodgett films

The alignment of a nematic liquid crystal (5CB) induced by several substituted calixarene-based films is reported. Calixarene molecules consisting of four or six moieties and different substituents (acyl and azobenzene groups) were synthesized. Films of such molecules were deposited using a Langmuir-Blodgett technique onto glass plates and were characterized using atomic force microscopy. These treated plates were used to prepare liquid crystal cells, and the overall alignment studied. In the case of photosensitive molecules, photoinduced reorientation experiments were undertaken and are reported. It is shown that it is not important to have a large number of interacting sites on the surface to induce a reorientation of the liquid crystal.