Revealing the nature of thio-click reactions on the solid phase

Thiol- and yne-functionalized beads were manufactured in a simple microfluidic setup. While CuAAC and thiol-yne reactions were performed on yne-functionalized beads, 9 different thiol-X reactions were compared, in terms of kinetics and conversion, on thiol-functionalized beads.     

Fluorometric monitoring of organic reactions on solid phase

The direct monitoring of reaction progress on solid supports by fluorescence spectroscopy is described. An immobilized fluorescent tracer molecule (dansyl chloride) is used to monitor the reaction on OH resins (Argopore Wang, PS Wang, and Argogel Wang), both in batch and in parallel chemistry. Fluorescence measurements were obtained directly on solid phase. The method demonstrated to be a valuable tool for the quantitative determination of resin-bound hydroxyl groups, to study reaction kinetics and for continuously monitoring the progress of the conversion of the hydroxyl resins into the chlorinated ones. The procedure proposed is highly sensitive compared to the traditional ones. The system can be extended to monitor a variety of reactions on solid supports, and in conjunction with a well-established technique such as flow analysis, basic studies on solid-phase become possible.     

Retardation of monomolecular reactions in the solid phase

The rate constants of initial monomolecular stages of thermal decomposition in the solid phase were measured for 22 organic compounds. The ratio of rate constants of decomposition in the melt and solid state, characterizing the reaction retardation in the crystal lattice, was determined. The retardation effect was compared to the physical properties of the crystal. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1261–1264, July, 1999.     

Rapid microwave promoted Sonogashira coupling reactions on solid phase

A microwave-enhanced, rapid, and efficient solid-phase version of the Sonogashira reaction is presented. It has been applied to the coupling of aryl iodides and bromides with various acetylene derivatives giving excellent yields in 15-25 min. The scopes of homogeneous, solventless, and solid-phase conditions for Sonogashira coupling of aryl halides are compared.     

Investigation of cooperative kinetics on reactions of functional groups on polymer chains

The kinetics of aminolysis of 1,2;3,4-meso-erythritol dicarbonate and 1,2;3,4;5,6-mannitol, sorbitol, and dulcitol tricarbonates by n-butylamine in dimethylformamide solution was investigated. The dicarbonate and tricarbonates are considered respectively as models of dyads and triads in the poly(vinylene carbonate) chain. The theoretical kinetic curves for the dimer and the trimers were calculated by solution of kinetic equations and close agreement with experiment was obtained. A version of the Monte-Carlo method was developed to provide a model for the reaction process by a computer calculation including the neighboring group effect in enhancing reactivity. The theoretical curve for a trimer coincides with the experimental one. These results confirm the accelerating influence of the unreacted neighboring groups. For the polymeric chain the experimental and calculated curves deviate for conversions beyond 10%. This indicates an additional polymer effect, which is as yet unexplained.     

Catalyzed Knoevenagel reactions on inorganic solid supports: Application to the synthesis of coumarine compounds

Knoevenagel reactions involving carbonyl compounds and active methylene derivatives have been studied in the presence of alumina, KSF and K10 montmorillonites. With addition of water the ester group undergoes hydrolysis. A route is disclosed for the synthesis of coumarine compounds catalyzed by solid supports.     

New thermo-crosslinking reactions of polymers containing pendant epoxide groups with various polyfunctional active esters

New thermo-crosslinking reactions of poly(glycidyl methacrylate), copolymers of glycidyl methacrylate with methyl methacrylate, styrene or ethyl acrlate with various active esters such as di[S-(2-benzothiazoly)] thioadipate (BTAD), di(S-phenyl) thioadipate (PTAD), di(4-nitrophenyl) adipate (NPAD), diphenyl adipate (PAD), and di(S-phenyl) thioisophthalate (PTIP), and other polyfunctional esters were carried out in the film state using various catalysts such as quarternary ammonium or phosphonium salts, tert amines, or the crown ether 18-crown-6 = potassium salts system. Addition reactions of pendant epoxide groups in the polymer with the active esters such as NPAD and PTAD proceeded selectively to give gel compounds without other side reactions. The rates of reaction with the thioesters such as BTAD and PTAD were relatively faster than those with the phenyl esters such as PAD and NPAD at 70°C. The rates of reactions with the esters having flexible segments such as PTAD were also faster than those with the esters having rigid skeletons such as PTIP. Furthermore, it was found that the rate of reaction was affected strongly by reaction temperature, catalyst concentration, length of alkyl chain in the catalyst, kind of counterion of quarternary ammonium salts as a catalyst, content of pendant epoxide groups in the polymer, and kind of copolymer unit in the polymer, respectively.     

The ring opening and oligomerisation reactions of an epoxide and an episulfide on aluminosilicates in the liquid phase

The ring opening reactions of propylene oxide (methyloxirane) or ethylene sulfide )thiirane) were studied in the liquid phase over HZSM-5, HY-FAU or AlMCM-41 at 363 K or 423 K and under 1 or 20 bar pressure in a batch reactor. The proportion of these routes were identified: (i) single C−O scission providing non-cyclic products, (ii) double C−O cleavage leading to the loss of the heteroatom, (iii) oligomerisation resulting in cyclic dimers and the trimer of thiirane and a non-cyclic dimer of methyloxirane. The reaction pathway depended on the conditions and the solid acids used. Findings are compared to those in the gas phase over the same solid acids. Transformation mechanisms are also suggested.     

A spectrophotometric assay for solid phase primary amino groups

A rapid, sensitive, and convenient spectrophotometric assay was developed for the measurement of amino groups on solid supports. This method is based on the reaction of amino groups of solids with an excess ofo-phthaldialdehyde (OPA) and subsequent quantitative determination of unreacted OPA by reaction with glycine. Four solids possessing variable quantities of amino groups were examined. Results indicate that about 70% of the total surface amino concentration (determined by the microKjeldahl method) are available for ligand attachment. Unlike the spectrophotometric 2,4,6-trinitrobenzenesulfonic acid method, the OPA spectrophotometric assay is more rapid, sensitive, and convenient, and unlike the spectrofluorimetric OPA, it does not require sophisticated instrumentation.     

A molecularly imprinted polymer for solid phase extraction of allantoin

We describe a molecularly imprinted polymer (MIP) for the solid-phase extraction of the skin protectant allantoin. The MIP was deposited on the surface of monodisperse silica microspheres possessing acroyl groups on the surface (MH-SiO₂). The resulting MIP microspheres (MH-SiO₂@MIP) showed a 3.4-fold higher adsorption capacity and a 1.9-fold better selectivity for allantoin than the respective non-imprinted polymer (MH-SiO₂@NIP). The monolayer adsorption capacities of the MH-SiO₂@MIP and the MH-SiO₂@NIP were calculated with the help of the Langmuir model and found to be 6.8 and 1.9 mg?g^?1, respectively. Adsorption kinetics fit a pseudo-second order rate mechanism, with an initial adsorption rate of 1.44 for the MH-SiO₂@MIP, and of 0.07 mg?g^?1?min^?1 for the MH-SiO₂@NIP. The material can be regenerated, and its adsorption capacity for allantoin remains stable for at least five regeneration cycles. It was successfully used as a sorbent for the selective solid-phase extraction of allantoin from Rhizoma dioscoreae.

A molecularly imprinted polymer for solid phase extraction of allantoin

We describe a molecularly imprinted polymer (MIP) for the solid-phase extraction of the skin protectant allantoin. The MIP was deposited on the surface of monodisperse silica microspheres possessing acroyl groups on the surface (MH-SiO₂). The resulting MIP microspheres (MH-SiO₂@MIP) showed a 3.4-fold higher adsorption capacity and a 1.9-fold better selectivity for allantoin than the respective non-imprinted polymer (MH-SiO₂@NIP). The monolayer adsorption capacities of the MH-SiO₂@MIP and the MH-SiO₂@NIP were calculated with the help of the Langmuir model and found to be 6.8 and 1.9 mg•g⁻¹, respectively. Adsorption kinetics fit a pseudo-second order rate mechanism, with an initial adsorption rate of 1.44 for the MH-SiO₂@MIP, and of 0.07 mg•g⁻¹•min⁻¹ for the MH-SiO₂@NIP. The material can be regenerated, and its adsorption capacity for allantoin remains stable for at least five regeneration cycles. It was successfully used as a sorbent for the selective solid-phase extraction of allantoin from Rhizoma dioscoreae.

A molecularly imprinted polymer for the selective separation of allantoin was developed. It was successfully used as a sorbent for the selective solid-phase extraction of allantoin from Rhizoma dioscoreae.

     

Photochemical reactions of polymers containing thiocyanatoacetyl groups and dyeing the resulting polymer films

Poly(styrene-co-4-thiocyanatoacetylstyrene) and poly(4-acetylstyrene-co-4-thiocyanatoacetyl-styrene) were prepared and their photochemical reactions were studied in the solid state. It was found that the thiocyanatoacetyl groups were easily rearranged with the corresponding isothiocyanatoacetyl groups by ultraviolet (UV) irradiation and that the resulting isothiocyanatoacetyl groups underwent intramolecular cyclization when treated with triethylamine or ammonia to yield oxazole-2-thione moieties. The irradiated polymer films could be dyed selectively with cationic dyes in an appropriate dye bath because of the formation of anionic species by keto-enol tautomerization of oxazole-2-thione moieties in an alkaline state.     

Immobilization of cationic polymer particles having active ester groups onto solid surfaces

Monodispersed cationic polymer particles with sulfonium groups and active ester groups at their surfaces were prepared by emulsifier-free emulsion copolymerization of styrene (ST) with a water-soluble active ester monomer, methacryloyloxyphenyldimethylsulfonium methylsulfate (MAPDS). The cationic polymer particle monolayers were fabricated on unmodified and aminated glass plates by electrostatic interactions and chemical reactions, respectively. The polymer particles were immobilized onto unmodified glass plates at relatively regular intervals in the absence of electrolytes, and the morphology of particle monolayers on the glass plates was changed with solid content of latex, electrolyte and cationic surfactant concentration. The polymer particles were immobilized onto aminated glass plate as aggregates by controlling the pH of latex and electrolyte concentration. Remaining active ester groups of the particle monolayers were confirmed to react easily with primary amino compounds.     

Synthesis,spectroscopic characterization and chemical reactions of stable o-QM on solid phase

A novel approach towards quinone methides stabilization has been achieved by anchoring the reactive o-QM intermediate on solid phase (RTHP). The reactivity and selectivity of supported o-QM towards N and S centered nucleophiles have been explored.     

Polycarboxylic microsphere polymer gel for solid phase extraction of trace elements

A simple and sensitive method has been developed for the determination of trace elements (Cd, Co, Cu, Ni, Fe and Pb) in sea water and natural waters by electrothermal atomic absorption spectrometry. The method is based on column solid phase extraction of trace elements on a newly synthesized polycarboxylic gel. The sorbent was prepared by dispersion copolymerization of methacrylic acid (as a monomer) and trimethylolpropane trimethacrylate (as a crosslinking agent) in the form of monodisperse microspheres. It exhibits high regeneration ability, chemical and mechanical resistivity. The influence of pH, flow rates and concentration of the eluent on the degree of sorption of trace elements have been evaluated. The maximum static adsorption capacities of the sorbent at the optimal conditions for lead, nickel, cobalt, iron, cadmium and copper are determined. Detection limits achieved for the elements studied for 100 mL water sample volume were between 0.005 and 0.05 μg L^?1. The relative standard deviation varied in the range 5–13% for all elements studied. The validity of the method was checked by an analysis of standard reference material SRLS-3 Riverine Water. Very good agreement between the analytical results and the certified values (t-test at 95% confidence level) was observed. The new polycarboxylic gel was applied to passive sampling procedures due to its high chemical and mechanical stability.