Electric-field-induced conductance switching in FeCo Prussian blue analogues

FeCo Prussian blue analogues, which are known as typical molecule-based magnets, exhibited abrupt conductance switching by applying a high electric field as well as by varying the temperature. The current density versus electric field (J-E) curves of FeCo Prussian blue with Rb cations in interstitial sites shows so-called negative resistance effects at electric fields higher than the threshold voltage. This means that the FeCo Prussian blue analogues are multiproperty materials in the sense that their conducting, magnetic, and optical properties can be reversibly controlled by certain external stimuli.     

Unveiling anomalous lattice shrinkage induced by Pi-backbonding in Prussian blue analogues

Transition-metal(TM)-based Prussian blue and its analogues(TM-PBAs) have attracted considerable attention as cathode materials owing to their versatile ion storage capability with tunable working voltages. TM-PBAs with different crystal structures, morphologies, and TM combinations can exhibit excellent electrochemical properties because of their unique and robust host frameworks with well-defined<100> ionic diffusion channels. Nonetheless, there is still a lack of understanding regarding ...     

Photo-induced charge transfer in Prussian blue analogues as detected by photoacoustic spectroscopy

The photo-induced charge transfer in four series of Prussian blue (PB) analogues was studied from photoacoustic spectra. In cobalticyanides the observed signals were assigned to a metal-to-ligand charge transfer, which appears as a shoulder below 450 nm, and to d-d transitions for Co(II), Ni(II) and Cu(II) complex salts. No evidence of metal-to-metal charge transfer was observed for this series, which is probably due to the high stability of low spin cobalt(III) in the hexacyanide complex. Photoacoustic spectra for ferricyanides are broad bands, which result particularly intense up to 750 nm. Such features were attributed to the overlapping of contributions from metal-to-ligand (<600 nm) and metal-to-metal charge transfer transitions, with probably also a minor contribution from d-d transitions in the outer metal. The spectra for the ferrocyanides series are dominated by the metal-to-ligand charge transfer band below 550 nm, approximately 100 nm above this transition in cobalticyanides. Within the studied solids, the most intense and broad metal-to-metal charge transfer bands were found for a series of low spin Co(III) high spin Co(II) hexacyanoferrates(II,III) and with similar features also for ferric ferrocyanide (Prussian blue), assigned to Fe(II)-->Co(III) and Fe(II)-->Fe(III) photo-induced transition, respectively. The first of these transitions requires of more energetic photons to be observed, its maximum falls at 580 nm while for Prussian blue it is found at 670 nm. Prussian blue analogues are usually obtained as nanometric size particles and many of them have a microporous structure. The role of surface atoms on the observed charge transfer bands in the studied series of compounds is also discussed.     

Metal-to-ligand and ligand-to-metal charge transfer in thin films of Prussian blue analogues investigated by X-ray absorption spectroscopy

A series of thin films of Prussian blue analogues is investigated by X-ray absorption spectroscopy (XAS) at the Fe, Co and Mn L(2,3)-edges. The ligand field multiplet theory enables us to examine accurately the electronic structure of these materials. Experimental XAS spectra of CoFe Prussian blue analogues are successfully reproduced using a ground state configuration including metal-to-ligand (MLCT) and ligand-to-metal charge transfer (LMCT) at the Co and Fe L(2,3)-edges. In particular, a huge improvement is achieved for satellite peaks at the Co(iii) L(2,3)-edges compared to previous calculations in the literature based on LMCT effects only. On the other hand, XAS spectra of MnFe analogues synthesized for the first time, can be reproduced conveniently by taking into account either MLCT or LMCT depending on the conditions of the sample preparation. For each thin film, the proportion of the different oxidation states of Co, Fe and Mn is evaluated. Unexpectedly, this analysis reveals the presence of a significant amount of a reduced phase, which turns out to be strongly dependent on the sample synthesis and storage conditions.     

Prussian blue analogues as aqueous Zn-ion batteries electrodes: Current challenges and future perspectives

The urgency of integrating renewable energy sources in the power grid has pushed the development of aqueous metal-ion batteries because of their low cost, nontoxicity, high safety, and environmentally friendliness. Among the variety of aqueous metal-ion batteries that are currently under development, aqueous Zn-ion batteries (A-ZIBs) have recently gained a great attention because of their high specific energy and high reversibility in aqueous solutions, together with the low cost and high abundancy of the zinc. In this article, the authors intend to present an overview of the Prussian blue analogue materials, which are among the most promising materials for positive electrodes in A-ZIBs because of their easier synthesis route, reversible ion-insertion, high safety, and low toxicity, highlighting their strength points and open challenges.     

Magnetic ordering and spin-glass behavior in first-row transition metal hexacyanomanganate(IV) Prussian blue analogues

Magnetically ordered Prussian blue analogues with the general formulation of M[Mn(CN)6] (M = V, Cr, Mn, Co, Ni) were made in aprotic media utilizing [MnIV(CN)6]2-. These analogs are valence-ambiguous, as they can be formulated as MII[MnIV(CN)6] or MIII[MnIII(CN)6]. The X-ray powder diffraction of each member of this family can be indexed to the face-centered cubic (fcc) Prussian blue structure type, with atypically reduced unit cell parameters (a approximately 9.25 +/- 0.25 A) with respect to hydrated Prussian blue structured materials (a > or = 10.1 A). The reduced a-values are attributed to a contraction of the lattice in the absence of water or coordinating solvent molecule (i.e., MeCN) that is necessary to help stabilize the structure during lattice formation. Based on vCN IR absorptions, X-ray photoelectron spectra, and magnetic data, the following oxidation state assignments are made: MII[MnIV(CN)6] (M = Co, Ni) and MIII[MnIII(CN)6] (M = V, Cr, Mn). Formation of MnIII[MnIII(CN)6] is in contrast to MnII[MnIV(CN)6] prepared from aqueous media. Above 250 K, the magnetic susceptibilities of M[Mn(CN)6] (M = V, Cr, Mn, Co, Ni) can be fit to the Curie-Weiss equation with theta = -370, -140, -105, -55, and -120 K, respectively, suggesting strong antiferromagnetic coupling. The room temperature effective moments, respectively, are 3.71, 4.62, 5.66, 4.54, and 4.91 microB, consistent with the above oxidation state assignments. All compounds do not exhibit magnetic saturation at 50 kOe, and exhibit frequency-dependent chi'(T) and chi"(T) responses characteristic of spin-glass-like behavior. M[Mn(CN)6] order as ferrimagnets, with Tc's taken from the peak in the 10 Hz chi'(T) data, of 19, 16, 27.1, < 1.75, and 4.8 K for M = V, Cr, Mn, Co, and Ni, respectively. The structural and magnetic disorder prevents NiII[MnIV(CN)6] from ordering as a ferromagnet as anticipated, and structural inhomogeneities allow CoII[MnIV(CN)6] and VIII[MnIII(CN)6] to unexpectedly order as ferrimagnets. Also, MnIII[MnIII(CN)6] behaves as a reentrant spin glass showing two transitions at 20 and 27.1 K, and similar behavior is evident for CrIII[MnIII(CN)6]. Hysteresis with coercive fields of 340, 130, 8, 9, and 220 Oe and remanent magnetizations of 40, 80, 1500, 4, and 250 emuOe/mol are observed for M = V, Cr, Mn, Co, and Ni, respectively.     

Microelectrochemical electronic effects in two-layer structures of distinct Prussian blue type metal hexacyanoferrates

The formation of a rigid bilayer structure from two metal hexacyanoferrates: Prussian blue (PB) and nickel hexacyanoferrate (NiHCNFe), as inner and outer films, respectively, has been demonstrated. To avoid intermingling of the granular cyanometallate microstructures, namely of the outer film (NiHCNFe) into the inner film (PB), the morphology of outer film material was changed by forming a polymeric hybrid (composite) of NiHCNFe with poly(N-methylpyrrole). The outer NiHCNFe film is physically separated from the electrode surface, and it undergoes redox reactions at potentials characteristic of the inner PB film. This arrangement leads to the reversible charge state trapping and bistable switching during voltammetric potential cycling. Under solid-state voltammetric conditions in the absence of contact with the liquid electrolyte phase, when the bilayer structure of PB and the oxidized NiHCNFe was formed between two sandwich-forming carbon electrodes, unidirectional rectifying current flow has been observed.Dedicated to Zbigniew Galus on the occasion of his 70th birthday     

Molecule-based room-temperature magnets: catalytic role of V(III) in the synthesis of vanadium-chromium Prussian blue analogues

A new synthetic procedure to obtain vanadium-chromium Prussian blue analogues is presented, using controlled amounts of V(III) in solution during the synthesis. The vanadium and chromium oxidation states and the chemical environment of the metal ions in the solids are characterized by infrared and X-ray absorption spectroscopies. The presence of weak amounts of V(III) during the synthesis provides materials which are better organized and present reproducible Curie temperature and magnetization at saturation in agreement with the observed V/Cr stoichiometry.     

Boosting the sodium storage performance of Prussian blue analogues via effective etching

Prussian blue analogues(PBAs) have gained significant popularity as cathode materials for sodium-ion batteries(SIBs) due to their remarkable features such as high capacity and convenient synthesis. However, PBAs usually suffer from kinetic problems during the electrochemical reactions due to sluggish Na⁺ diffusion in the large crystals, resulting in low-capacity utilization and inferior rate capability. In this study, we present a facile etching method aiming at activating the sodium ...     

Simultaneous identification of historical pigments Prussian blue and indigo in paintings by electrospray mass spectrometry

A new analytical protocol for identification of Prussian blue (PB) and indigo was proposed. Pigments useful for dating of artworks were detected by flow injection analysis/electrospray ionization mass spectrometry after alkalization of their suspensions in water, decomposition of PB to iron (III) hydroxide and hexacyanoferrate (II) and reduction of indigo to soluble leucoindigo using sodium dithionite. Limits of detection (PB 47 pg, indigo 59 pg) complied with requirements for analysis of microsamples of historical paintings. Potential of the developed method was proven in analysis of blue samples of two oil paintings from the 20^th century. Further, PB was confirmed in a microsample from a painting of ‘Crucifixion’, St. Sebestian church on St. Hill in Mikulov, Czech Republic. Copyright © 2013 John Wiley & Sons, Ltd.     

Amperometric biosensors based on the immobilization of oxidases in a Prussian blue film by electrochemical codeposition

Prussian blue has been formed by cyclic voltammetry onto the basal pyrolytic graphite surface to prepare a chemically modified electrode which provides excellent electrocatalysis for both oxidation and reduction of hydrogen peroxide. It is found for the first time that glucose oxidase or -amino oxidase can be incorporated into a Prussian blue film during its electrochemical growth process. Two amperometric biosensors were fabricated by electrochemical codeposition, and the resulting sensors were protected by coverage with a thin film of Nafion. The influence of various experimental conditions was examined for optimum analytical performance. The glucose sensor responds rapidly to substrates with a detection limit of 2 × 10⁻⁶ M and a linear concentration range of 0.01–3 mM. There was no interference from 2 mM ascorbic acid or uric acid. Another ( -amino acid) sensor gave a detection limit of 3 × 10⁻⁵ M -alanine, injected with a linear concentration range of 7.0 × 10⁻⁵-1.4 × 10⁻² M. Glucose and -amino acid sensors remain relatively stable for 20 and 15 days, respectively. There is no obvious interference from anion electroactive species due to a low operating potential and excellent permselectivity of Nafion.     

Expanded Prussian blue analogues incorporating [Re6Se8(CN)6](3-/4-) clusters: adjusting porosity via charge balance

Face-capped octahedral [Re(6)Se(8)(CN)(6)](3-/4-) clusters are used in place of octahedral [M(CN)(6)](3-/4-) complexes for the synthesis of microporous Prussian blue type solids with adjustable porosity. The reaction between [Fe(H(2)O)(6)](3+) and [Re(6)Se(8)(CN)(6)](4-) in aqueous solution yields, upon heating, Fe(4)[Re(6)Se(8)(CN)(6)](3).36H(2)O (4). A single-crystal X-ray analysis confirms the structure of 4 to be a direct expansion of Prussian blue (Fe(4)[Fe(CN)(6)](3).14H(2)O), with [Re(6)Se(8)(CN)(6)](4-) clusters connected through octahedral Fe(3+) ions in a cubic three-dimensional framework. As in Prussian blue, one out of every four hexacyanide units is missing from the structure, creating sizable, water-filled cavities within the neutral framework. Oxidation of (Bu(4)N)(4)[Re(6)Se(8)(CN)(6)] (1) with iodine in methanol produces (Bu(4)N)(3)[Re(6)Se(8)(CN)(6)] (2), which is then metathesized to give the water-soluble salt Na(3)[Re(6)Se(8)(CN)(6)] (3). Reaction of [Co(H(2)O)(6)](2+) or [Ni(H(2)O)(6)](2+) with 3 in aqueous solution affords Co(3)[Re(6)Se(8)(CN)(6)](2).25H(2)O (5) or Ni(3)[Re(6)Se(8)(CN)(6)](2).33H(2)O (6). Powder X-ray diffraction data show these compounds to adopt structures based on the same cubic framework present in 4, but with one out of every three cluster hexacyanide units missing as a consequence of charge balance. In contrast, reaction of [Ga(H(2)O)(6)](3+) with 3 gives Ga[Re(6)Se(8)(CN)(6)].6H(2)O (7), wherein charge balance dictates a fully occupied cubic framework enclosing much smaller cavities. The expanded Prussian blue analogues 4-7 can be fully dehydrated, and retain their crystallinity with extended heating at 250 degrees C. Consistent with the trend in the frequency of framework vacancies, dinitrogen sorption isotherms show porosity to increase along the series of representative compounds 7, Ga(4)[Re(6)Se(8)(CN)(6)](3).38H(2)O, and 6. Furthermore, all of these phases display a significantly higher sorption capacity and surface area than observed in dehydrated Prussian blue. Despite incorporating paramagnetic [Re(6)Se(8)(CN)(6)](3-) clusters, no evidence for magnetic ordering in compound 6 is apparent at temperatures down to 5 K. Reactions related to those employed in preparing compounds 4-6, but carried out at lower pH, produce the isostructural phases H[cis-M(H(2)O)(2)][Re(6)Se(8)(CN)(6)].2H(2)O (M = Fe (8), Co (9), Ni (10)). The crystal structure of 8 reveals a densely packed three-dimensional framework in which [Re(6)Se(8)(CN)(6)](4-) clusters are interlinked through a combination of protons and Fe(3+) ions.     

Shape-controlled synthesis of Prussian blue analogue Co3[Co(CN)6]2 nanocrystals

Prussian blue analogue Co3[Co(CN)6]2 nanostructures with morphologies of truncated nanocubes (polyhedra), cubes and rods, were synthesized in large quantities by a direct dissociation of the single-source precursor K3[Co(CN)6] in a microemulsion system; the molar ratio of H2O to surfactant and the concentration of K3[Co(CN)6] both played important roles in determining the shape of the product.     

Hydrostatic pressure induced transformation of magnetism in a trimetallic CuMnFe Prussian blue analogue

With chemical co-precipitation, trimetal Prussian blue analogue Cu_0.71Mn_0.79[Fe(CN)₆]·7.3H₂O was obtained. We used supercritical carbon dioxide extraction apparatus to pressurize the samples for 10?MPa, 20?MPa, and 42?MPa for 5?h. X-ray powder diffraction data show the single-phase of the sample at different pressures with a NaCl-type face-centered cubic structure. Trimetal Prussian blue analogs Cu_0.71Mn_0.79[Fe(CN)₆]·7.3H₂O include both ferromagnetic and antiferromagnetic exchange interactions among different metal ions and exhibit novel mixed magnetic property. Hydrostatic pressure may be a powerful tool for development of new functional magnets. Spontaneous magnetization in the field cooled (FC) magnetization above 10?MPa approaches a value three times larger than that at 1?atm, and the zero field cooled (ZFC) magnetization is also extremely sensitive to pressure. The results show that pressure can simultaneously enhance the ferromagnetic and antiferromagnetic interactions in this material. The Weiss constant decreases gradually with pressure increasing from 10 to 42?MPa, due to pressure-induced electron transfer from Mn²⁺/Cu²⁺ to Fe³⁺.     

Analysis of Cibacron blue F3G-A interaction with therapeutic proteins by MALDI-TOF mass spectrometry

The formation of the complexes between Cibacron blue F3G-A and two therapeutic proteins, recombinant human interferon-alpha2b and recombinant human growth hormone, was investigated. The method of time-resolved limited proteolysis coupled with MALDI-TOF mass spectrometry was used. The analysis of peptide maps revealed that A(17)HR(19) and L(20)HQLAFDTYQEFEEAYIPK(38) of hGH, and R(14)TLMLLAQMR(23) and D(33)RHDFGFPQEEFGNQFQK(50) of hIFN-alpha2b, exhibit affinity to Cibacron blue F3G-A. Copyright (c) 2008 John Wiley & Sons, Ltd.     

三嗪染料修饰曲通X-100亲和分离苹果酸脱氢酶

三嗪染料(Cibacmn blue F3G-A)的蒽醌部分结构类似于腺嘌呤,可以用于亲和分离以NAD+(NADP+)和FAD为辅酶的脱氢酶.三嗪染料通过亲核取代反应修饰曲通X-100,形成的三嗪染料-曲通X-100与成相聚合物吐温80、磷酸钾盐构成液-固亲和萃取体系.从猪心肌匀浆液纯化苹果酸脱氢酶的条件:三嗪染料-曲通...