Molecular dynamics simulations of charged nanoparticle self-assembly at ionic liquid-water and ionic liquid-oil interfaces

Nanoparticle self-assembly at liquid-liquid interfaces can be significantly affected by the individual nanoparticle charges. This is particularly true at ionic liquid (IL) based interfaces, where Coulombic forces play a major role. Employing 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]) as a model IL, we have studied the self-assembly of hydrophobic nanoparticles with different surface charges at the IL/water and IL/oil (hexane) interfaces using molecular dynamics simulations. In the IL/water system, the nanoparticles were initially dispersed in the water phase but quickly equilibrated at the interface, somewhat in favor of the IL phase. This preference was lessened with increased nanoparticle charge. In the IL/hexane system, all charged nanoparticles interacted with the IL to some extent, whereas the uncharged nanoparticles remained primarily in the hexane phase. Potential of mean force calculations supported the observations from the equilibrium studies and provided new insights into the interactions of the nanoparticles and ionic liquid based interfaces.     

Interfacial tension studies of crown ethers at air/water and hexane/water interfaces

The adsorption of phase transfer catalysts, 18-crown-6 and dicyclohexano-18-crown-6, at the air/water and the hexane/water interfaces were investigated. Interfacial tension sigma decreased by increasing concentrations of these compounds and therefore both of these crown ethers are accumulated at interfaces. The variation of sigma with concentration for both compounds follows the Szyszkowski equation very well, from which the values of saturated surface densities and interaction parameters have been evaluated. On the basis of occupied surface area of each molecule, the orientation of each of molecules at the air/water and the hexane/water interfaces have been proposed. The present results show that dicyclohexano-18-crown-6 has the higher tendency not only to dissolve into the hexane phase but also to adsorb at the hexane/water interface than 18-crown-6 and that the Starks extraction mechanism was suggested for the present phase transfer catalysis systems.     

Microscopic theory for interface fluctuations in binary liquid mixtures

Thermally excited capillary waves at fluid interfaces in binary liquid mixtures exhibit simultaneously both density and composition fluctuations. Based on a density functional theory for inhomogeneous binary liquid mixtures we derive an effective wavelength dependent Hamiltonian for fluid interfaces in these systems beyond the standard capillary-wave model. Explicit expressions are obtained for the surface tension, the bending rigidities, and the coupling constants of compositional capillary waves in terms of the profiles of the two number densities characterizing the mixture. These results lead to predictions for grazing-incidence x-ray scattering experiments at such interfaces.     

Prediction of elution bandwidth for purine compounds by a retention model in reversed-phase HPLC with linear-gradient elution

In reversed-phase liquid chromatography, the retention mechanism of solute has been studied under linearly programmed gradient mobile-phase conditions. The separation of a mixture of four purine compounds (purine, theobromine, theophylline, and caffeine) was considered as a practical case in two binary mobile phase systems, water/methanol and water/acetonitrile. The retention model which describes how the retention factor is related to the mobile-phase composition has been developed in various mathematical forms to predict the retention time in both linear and gradient elutions. For a pulse injection of sample, two important factors, the retention time and the bandwidth of solute, might be computable to predict the elution profiles estimated by the distribution function, such as the Gaussian distribution function. In this work, a prediction method based on the analogue of the retention model was proposed to calculate the bandwidth in linear gradient elutions. Band broadening was caused by the different migration velocities of the front and rear ends of the solute band in a chromatographic column. Therefore, the migration behaviors of the front and rear ends of the solute band were explained with the same retention model which had been used to predict the retention time of solute. For the well retained solutes, theophylline and caffeine, the predicted bandwidth and experimentally obtained bandwidth showed good agreement in both isocratic and gradient elutions.     

Hydrogen-bonding molecular ruler surfactants as probes of specific solvation at liquid/liquid interfaces

Resonance-enhanced, second harmonic generation (SHG) is used to measure the electronic structure of solutes sensitive to specific solvation adsorbed to liquid/liquid and liquid/solid interfaces. Here, specific solvation refers to solvent–solute interactions that are directional and localized. N-methyl-p-methoxyaniline (NMMA) is a solute whose first allowed electronic transition wavelength remains almost constant (∼315 nm) in non-hydrogen-bonding solvents regardless of solvent polarity. However, in hydrogen-bond-accepting solvents such as dimethylsulfoxide, NMMA’s absorbance shifts to longer wavelengths (320 nm), whereas in hydrogen-bond-donating solvents (e.g., water), the absorbance shifts to shorter wavelengths (∼300 nm). SHG experiments show that at alkane/silica interfaces, surface silanol groups serve as moderately strong hydrogen-bond donors as evidenced by NMMA’s absorbance of 307 nm. At the carbon tetrachloride/water interface, NMMA absorbance also shifts to slightly shorter wavelengths (298 nm) implying that water molecules at this liquid/liquid interface are donating strong hydrogen bonds to the adsorbed NMMA solutes. In contrast, experiments using newly developed molecular ruler surfactants with NMMA as a model hydrophobic solute and a hydrophilic, cationic headgroup imply that, as NMMA migrates across an aqueous/alkane interface, it carries with it water that functions as a hydrogen-bond-accepting partner.     

Modeling gradient elution in countercurrent chromatography: efficient separation of tanshinones from Salvia miltiorrhiza Bunge

Countercurrent chromatography (CCC) is a support-free liquid-liquid chromatography using centrifugal fields to hold the liquid stationary phase. CCC has been widely applied in the separation of various natural and synthetic components using a variety of biphasic liquid systems. The related hexane or heptane/ethyl acetate/methanol or ethanol/water biphasic liquid systems demonstrated their significance in CCC. Gradient is difficult in CCC since any composition change in one phase induces a composition change of the other phase to maintain phase equilibrium. This work provides a new insight into linear gradient elution in CCC that is feasible with some biphasic liquid systems such as selected compositions of the hexane/ethyl acetate/ethanol/water systems. The equations modeling solute motion inside the CCC column are proposed. Particular compositions of the liquid system, namely the hexane/ethyl acetate/ethanol/water 8:2:E:W compositions with E + W = 10, were studied from W = 1 to 9. They showed moderate changes in the upper organic phase compositions. The model is tested with the separation of tanshinones from the rhizome of Salvia miltiorrhiza Bunge. Different linear solvent gradient profiles were experimentally performed between 8:2:5:5 and 8:2:3:7 compositions and the results were evaluated using the proposed model. Five tanshinones including dihydrotanshinone I, cryptotanshinone, tanshinone I, 1,2-dihydrotanshinquinone, and tanshinone IIA have been successfully separated (>95% purities) using a gradient profile optimized by the developed model. The gradient model can be used only with biphasic liquid systems in which one phase shows minimum composition changes when the other phase composition changes notably. This case is not the general case for biphasic liquid systems but can be applied with specific compositions of the quaternary hexane or heptane/ethyl acetate/methanol or ethanol/water most useful CCC liquid systems.     

Thermophysical properties of biodiesel and related systems: (Liquid + liquid) equilibrium data for soybean biodiesel

This work reports (liquid + liquid) equilibrium (LLE) data for the systems of interest in soybean biodiesel production. Numerical data for LLE were obtained for binary, ternary and quaternary systems comprising fatty acid methyl esters (FAME) and fatty acid ethyl esters (FAEE) from soybean oil, water, glycerol, methanol, and ethanol at temperatures of (303.15, 318.15, and 333.15) K. Quantification of compounds in equilibrium in both phases was determined by analytical methods whereas solubility curves (binodal) were obtained by the cloud-point method. For all systems investigated, good alignments were obtained between phase compositions and the initial as well as overall compositions hence indicating low deviations from the mass balance. Experimental results were correlated using the UNIQUAC model with satisfactory agreement between experiment and theory.     

Salt precipitation and trapped liquid cavitation in micrometric capillary tubes

Laboratory evidence shows that the occurrence of solid salt in soil pores causes drastic changes in the topology of the porous spaces and possibly also in the properties of the occluded liquid. Observations were made on NaCl precipitation in micrometric cylindrical capillary tubes, filled with a 5.5 M NaCl aqueous solution and submitted to drying conditions. Solid plug-shaped NaCl (halite) commonly grows at the two liquid-air interfaces, isolating the inner liquid column. The initially homogeneous porosity of the capillary tube becomes heterogeneous because of these two NaCl plugs, apparently closing the micro-system on itself. After three months, we observed cavitation of a vapor bubble in the liquid behind the NaCl plugs. This event demonstrates that the occluded liquid underwent a metastable superheated state, controlled by the capillary state of thin capillary films persisting around the NaCl precipitates. These observations show, first, that salt precipitation can create a heterogeneous porous medium in an initially regular network, thus changing the transfer properties due to isolating significant micro-volumes of liquid. Second, our experiment illustrates that the secondary salt growth drastically modifies the thermo-chemical properties of the occluded liquid and thus its reactive behavior.     

Effect of quantum partial charges on the structure and dynamics of water in single-walled carbon nanotubes

In this work, using quantum partial charges, computed from 6-31G(**)B3LYP density functional theory, in molecular dynamics simulations, we found that water inside (6,6) and (10,0) single-walled carbon nanotubes with similar diameters but with different chiralities has remarkably different structural and dynamical properties. Density functional calculations indicate that tubes with different chiralities have significantly different partial charges at the ends of tubes. The partial charges at the ends of a (10,0) tube are around 4.5 times higher than those of a (6,6) tube. Molecular dynamics simulations with the partial charges show different water dipole orientations. In the (10,0) tube, dipole vectors of water molecules at the end of the tube point towards the water reservoir resulting in the formation of an L defect in the center region. This is not observed in the (6,6) tube where dipole vectors of all the water molecules inside the tube point towards either the top or the bottom water reservoir. The water diffusion coefficient is found to increase in the presence of the partial charges. Water in the partially charged (10,0) tube has a lower diffusion coefficient compared to that of in the partially charged (6,6) tube.     

Analysis of polar compounds on PEG-40M/KF glass capillary columns

The chromatographic properties of potassium fluoride as an additive to the polyethylene glycol stationary phase were investigated. This unique base in organic chemistry was shown to succeed in yielding good results for the analysis of polar compounds, including the primary amines. Glass capillary columns of high selectivity for primary and secondary aliphatic amines were obtained by the “hexane plug” procedure by which a thin layer of KF is deposited on the inner surface of glass capillary columns. Some possible types of donor-acceptor interactions occuring within the system PEG/KF/solute were considered.     

Kinetics of water filling the hydrophobic channels of narrow carbon nanotubes studied by molecular dynamics simulations

The kinetics of water filling narrow single-walled carbon nanotubes was studied using molecular dynamics simulations. The time required to fully fill a nanotube was linear with respect to the tube length. We observed that water molecules could enter into nanotubes of different lengths, either from one end or from both ends. The probability of having a nanotube filled completely from both ends increased exponentially with the tube length. For short tubes, filling usually proceeded from only one end. For long tubes, filling generally proceeded from both tube ends over three stages, i.e., filling from one end, filling from both ends, and filling from both ends with the dipole reorientation of water molecules to give a concerted ordering within the fully filled tube. The water molecules in the partially filled nanotube were hydrogen bonded similarly to those in the fully filled nanotube. Simulations for the reference Lennard-Jones fluid without hydrogen bonds were also performed and showed that the filling behavior of water molecules can be attributed to strong intermolecular hydrogen bonding.     

Particle self-assembly in oil-in-ionic liquid Pickering emulsions

We have studied polydimethylsiloxane (PDMS)-in-1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]) Pickering emulsions stabilized by polystyrene microparticles with different surface chemistry. Surprisingly, in contrast to the consensus originating from oil/water Pickering emulsions in which the solid particles equilibrate at the oil-water droplet interfaces and provide effective stabilization, here the polystyrene microparticles treated with sulfate, aldehyde sulfate, or carboxylate dissociable groups mostly formed monolayer bridges among the oil droplets rather than residing at the oil-ionic liquid interfaces. The bridge formation inhibited individual droplet-droplet coalescence; however, due to low density and large volume (thus the buoyant effect), the aggregated oil droplets actually promoted oil/ionic liquid phase separation and distressed emulsion stability. Systems with binary heterogeneous polystyrene microparticles exhibited similar, even enhanced (in terms of surface chemistry dependence), bridging phenomenon in the PDMS-in-[BMIM][PF(6)] Pickering emulsions.     

Studies on the retention behaviour of some thiazolylazo derivatives in reversed phase liquid chromatography

The retention behaviour of thiazolylazo derivatives, 4-(2-thiazolylazo) resorcinol (TAR), 4-(2-thiazolylazo)-orcinol (TAO), 2-(2-thiazolylazo)-4-methylphenol (TAC) and 1-(2-thiazolylazo)-2-naphtol (TAN) was studied by reversed phase liquid chromatography. The optimum conditions for the separation of four thiazolylazo derivatives were examined with respect to column, flow rate, mobile phase composition and pH of mobile phase. These derivatives were separated simultaneously on Symmetry C₈ column using composition of acetonitrile/water (60/40, v/v) as mobile phase. The capacity factor (k′) has been decreased at higher pH than pK_a of solute which may due to the increasing concentration of the ionized species as increase the pH of mobile phase. The dependence of log k′ on the volume faction of water in the binary mobile phase and k′ on the liquid–liquid extraction distribution ratio (D_c) in acetonitrile–water (60/40, v/v)/n-octane extraction system for thiazolylazo derivatives were obtained good linear relationship. The results showed that the retention behaviour of these derivatives was mainly affected by the hydrophobic interaction between thiazolylazo as solute and mobile phase.     

Nonradiative deactivation of excited hemicyanines studied with submolecular spatial resolution by time-resolved surface second harmonic generation at liquid-liquid interfaces

The excited-state dynamics of aminostilbazolium dyes is known to be dominated by nonradiative deactivation through large-amplitude motion. In order to identify the coordinate(s) responsible for this process, the excited-state lifetimes of two dialkylaminostyryl-methylpyridinium iodides have been measured at liquid-liquid interfaces using time-resolved surface second harmonic generation. We found that the decay time of the excited-states of both compounds was increasing with the viscosity of the apolar phase, consisting of n-alkanes of varying length, but was unaffected by that of the polar phase, made of water/glycerol mixtures. This indicates that the nonradiative deactivation is associated with the twist of the dialkylaniline group, which is located in the apolar part of the molecule.     

Effects of Tube Materials on Capillary Chromatography Based on Tube Radial Distribution of Ternary Mixture Carrier Solvents under Laminar Flow Conditions

A capillary chromatography system was developed using an open capillary tube and a ternary solvents carrier solution of water-hydrophilic/hydrophobic organic solvent mixture. The chromatography is called a tube radial distribution chromatography (TRDC) system. The TRDC system works without applying high voltages or using specific columns, such as monolithic and packed columns. In this study, the effects of tube materials on separation performance were examined in the TRDC system, by using poly(tetrafluoroethylene) (PTFE; 100–400?μm inner diameter), polyethylene (PE; 200?μm inner diameter), and copolymer of (tetrafluoroethylene–perfluoroalcoxyethylene) (PTFE–PFAE; 100?μm inner diameter) capillary tubes. An analyte solution of 2,6-naphthalenedisulfonic acid and 1-naphthol as a model was subjected to the system with a water–acetonitrile–ethyl acetate carrier solution; 15:3:2 volume ratio (water-rich carrier) and 3:8:4 volume ratio (organic solvent-rich carrier). The flow rates were adjusted to be 0.5?μL?min^?1 for PTFE and PTFE–PFAE tubes as well as 2.0?μL?min^?1 for PE tube under laminar flow conditions. These analytes in the solution were separated in this order with the water-rich carrier solution with baseline separation in the three capillary tubes, while they were eluted in the reverse order or not separated with the organic solvent-rich carrier solution. The effects of tube temperature on separation were also examined with the water-rich carrier solution; the best resolutions were observed at 0?°C of the tube temperature. The obtained results were compared with those of fused-silica capillary tube and discussed.     

Synthesis,characterization and liquid chromatographic behaviours of a new chemically bonded liquid crystal

A new bonded liquid crystal stationary phase (2OC12) for high-performance liquid chromatography was studied. It resulted from coupling of LiChrospher Si 100 NH2 and a mesogenic carboxylic acid, 4-(4-(4-(3,4-didoceyloxystyrenyl)phenyl-diazenyl)phenyloxy-methylene) benzoic acid (ILC). ILC was characterized with proton NMR and differential scanning calorimetry, while 2OC12 was characterized by solid state 13C NMR and elemental analysis. 2OC12 surface area was determined by the BET method. The chromatographic behaviour of 2OC12 was investigated under both normal- and reversed-phase conditions. The plots of ln k against 1/T showed transition temperatures at 325 and 337 K. Polyaromatic hydrocarbons (PAHs) were separated using hexane, isooctane or hexane-chloroform. Above the transition temperatures, the bonded material exhibited a liquid crystal-like behaviour: (i) the plate number N was always highest possible, and (ii) the more retained the solute the more elongated it was (anthracene is eluted after phenanthrene, chrysene before tetracene, pentacene after dibenzo-a,h-anthracene). Using acetonitrile/water (60/40), reversed-phase data of aromatic hydrocarbons are similar (highest values of N, better resolution below than during the transitions).     

A dynamic liquid-liquid interfacial pressure detector for the rapid analysis of surfactants in a flowing organic liquid

Design and development of a dynamic interfacial pressure detector (DIPD) is reported. The DIPD measures the differential pressure as a function of time across the liquid-liquid interface of organic liquid drops (i.e., n-hexane) that repeatedly grow in water at the end of a capillary tip. Using a calibration technique based on the Young-Laplace equation, the differential pressure signal is converted, in real-time, to a relative interfacial pressure. This allows the DIPD to monitor the interfacial tension of surface active species at liquid-liquid interfaces in flow-based analytical techniques, such as flow injection analysis (FIA), sequential injection analysis (SIA) and high performance liquid chromatography (HPLC). The DIPD is similar in principle to the dynamic surface tension detector (DSTD), which monitors the surface tension at the air-liquid interface. In this report, the interfacial pressure at the hexane-water interface was monitored as analytes in the hexane phase diffused to and arranged at the hexane-water interface. The DIPD was combined with FIA to analytically measure the interfacial properties of cholesterol and Brij^®30 at the hexane-water interface. Results show that both cholesterol and Brij^®30 exhibit a dynamic interfacial pressure signal during hexane drop growth. A calibration curve demonstrates that the relative interfacial pressure of cholesterol in hexane increases as the cholesterol concentration increases from 100 to 10,000 μg ml⁻¹. An example of the utility of the DIPD as a selective detector for a chromatographic separation of interface-active species is also presented in the analysis of cholesterol in egg yolk by normal-phase HPLC-DIPD.     

Molecular dynamics simulations of nanoparticle self-assembly at ionic liquid-water and ionic liquid-oil interfaces

We have studied the self-assembly of hydrophobic nanoparticles at ionic liquid (IL)-water and IL-oil (hexane) interfaces using molecular dynamics (MD) simulations. For the 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)])/water system, the nanoparticles rapidly approached the IL-water interface and equilibrated more into the IL phase although they were initially in the water phase. In contrast, when the nanoparticles were dispersed in the hexane phase, they slowly approached the IL-hexane interface but remained primarily in the hexane phase. Consequently, the IL-hexane interface was rather undisturbed by the nanoparticles whereas the IL-water interface changed significantly in width and morphology to accommodate the presence of the nanoparticles. The equilibrium positions of the nanoparticles were also supported and explained by potential of mean force (PMF) calculations. Interesting ordering and charge distributions were observed at the IL-liquid interfaces. At the IL-hexane interface, the [BMIM] cations preferentially oriented themselves so that they were immersed more in the hexane phase and packed efficiently to reduce steric hindrance. The ordering likely contributed to a heightened IL density and a slightly positive charge at the IL-hexane interface. In contrast, the cations at the IL-water interface were oriented isotropically unless in the presence of nanoparticles, where the cations aligned across the nanoparticle surfaces.     

Effects of soluble surfactants on the deformation and breakup of stretching liquid bridges

Surfactants are routinely used to control the breakup of drops and jets in many applications such as inkjet printing, crop spraying, and DNA or protein microarraying. The breakup of surfactant-free drops and jets has been extensively studied. By contrast, little is known about the closely related problem of interface rupture when surfactants are present. Solutions of a nonionic surfactant, pentaethylene glycol monododecyl ether, or C12E5, in water and in 90 wt % glycerol/water are used to show the effects of surfactant and viscosity on the deformation and breakup dynamics of stretching liquid bridges. Equilibrium surface tensions for both solutions can be fitted with the Langmuir-Szyskowski equation. All experiments have been done at 24 degrees C. The critical micelle concentrations for C12E5 are 0.04 and 0.4 mM in water and the glycerol/water solution, respectively. With high-speed imaging, the dynamic shapes of bridges held captive between two rods of 3.15 mm diameter are captured and analyzed with a time resolution of 0.1-1 ms. The bridge lengths are 3.15 mm initially and about 5-7 mm at pinch-off. Breakup occurs after stretching for about 0.2-0.3 s, depending on the solution viscosity and the surfactant concentration. When the liquid bridges break up, the volume of the sessile drop left on the bottom rod is about 3 times larger than that of the pendant drop left on the top rod. This asymmetry is due to gravity and is influenced by the equilibrium surface tensions. Surfactant-containing low-viscosity water bridges are shown to break up faster than surfactant-free ones because of the effect of gravity. With or without surfactant, water bridges form satellite drops. Surfactant-containing high-viscosity glycerol/water bridges break up more slowly than surfactant-free ones because of strong viscous effects. Moreover, the shapes of the sessile drops close to breakup exhibit a "pear-like" tip; whether a satellite forms depends on the surface age of the bridge before stretching commences. These unexpected effects arising from the addition of surfactants are due to the capillary pressure reduction and Marangoni flows linked to dynamic surface tension.