Gold in Cyanidl?sungen

Ohne Zusammenfassung     

On Gold(I) Complexes and Anodic Gold Dissolution in Sulfite–Thiourea Solutions

Processes involving gold(I) complexes were studied in sulfite–thiourea (TU) solutions. It is shown that at pH >5 the complex [\( {\text{AuTU}}_{2}^{ + } \)] undergoes irreversible decomposition followed by deprotonation and formation of a solid phase. From the data of pH in mixed solutions, the equilibrium constants were evaluated: \( {\text{Au}}({\text{SO}}_{3} )_{2}^{3 - } + i{\text{TU}} \rightleftharpoons {\text{Au}}({\text{SO}}_{3} )_{2 - i} {\text{TU}}_{i}^{2i - 3} + i{\text{SO}}_{3}^{2 - } \), log₁₀ β ₁ = ?1.2, log₁₀ β ₂ = ?3.6. Some aspects of the anodic dissolution of gold in mixed sulfite–thiourea solutions are considered. With the help of the carbonate buffer system the change of the anodic current density j _a was studied at high pH; j _a (pH) has a maximum at pH 11.6–11.9 for E _a = 0.3–0.6 V (vs. NHE). At pH > 12.0, the j _a values decrease sharply. Possible mechanisms of anodic gold dissolution, as well as the role of sulfite, are discussed.     

Preparation of Gold Nanoparticles Protected with Polyelectrolyte

Gold nanoparticles were synthesized through the reduction of tetrachlorauric acid (HAuCh) by NaBH4, with polyethyleneimine(PEI) as stabilizer. The nanoparticles were characterized by UV-vis spectroscopy and atomic force microscopy(AFM).     

Gold(III) π-Allyl Complexes

Gold(III) π-complexes have been authenticated recently with alkenes, alkynes, and arenes. The key importance of Pd^II π-allyl complexes in organometallic chemistry (Tsuji–Trost reaction) prompted us to explore gold(III) π-allyl complexes, which have remained elusive so far. The (P,C)Au^III(allyl) and (methallyl) complexes 3 and 3′ were readily prepared and isolated as thermally and air-stable solids. Spectroscopic and crystallographic analyses combined with detailed DFT calculations support tight quasi-symmetric η³-coordination of the allyl moiety. The π-allyl gold(III) complexes are activated towards nucleophilic additions, as substantiated with β-diketo enolates.     

Self-assembly of Gold Nanoparticle Chains between Nanoelectrodes

Nanodevice applications of metal or semiconductor nanoparticles depend on the techniques to assemble them into ordered one-(1D) and two-dimensional (2D) arrange- ments1,2. In particular, 1D arrangements of nanoparticles are not only the basis for fabricat…     

Gold(I)/Gold(III) Catalysis that Merges Oxidative Addition and π-Alkene Activation

Heteroarylation of alkenes with aryl iodides was efficiently achieved with a (MeDalphos)AuCl complex through Au^I/Au^III catalysis. The possibility to combine oxidative addition of aryl iodides and π-activation of alkenes at gold is demonstrated for the first time. The reaction is robust and general (>30 examples including internal alkenes, 5-, 6-, and 7-membered rings). It is regioselective and leads exclusively to trans addition products. The (P,N) gold complex is most efficient with electron-rich aryl substrates, which are troublesome with alternative photoredox/oxidative approaches. In addition, it provides a very unusual switch in regioselectivity from 5-exo to 6-endo cyclization between the Z and E isomers of internal alkenols.     

Attachment of Gold Nanoparticles to Carbon Nanotubes

Carbon nanotubes were initially chemically modified with an H2SO4-HNO3 treatment, and subsequently activated with Pd-Sn catalytic nuclei via a one-step activation approach. These activated nanotubes were used as precursors for obtaining gold nanoparticles-attached nanotubes via simple electroless plating. This approach provides an efficient method for attachment of metal nanostructures to carbon nanotubes. Such novel hybrid nanostructures are attractive for many applications.     

Four-Dimensional Deoxyribonucleic Acid–Gold Nanoparticle Assemblies

Organization of gold nanoobjects by oligonucleotides has resulted in many three-dimensional colloidal assemblies with diverse size, shape, and complexity; nonetheless, autonomous and temporal control during formation remains challenging. In contrast, living systems temporally and spatially self-regulate formation of functional structures by internally orchestrating assembly and disassembly kinetics of dissipative biomacromolecular networks. We present a novel approach for fabricating four-dimensional gold nanostructures by adding an additional dimension: time. The dissipative character of our system is achieved using exonuclease III digestion of deoxyribonucleic acid (DNA) fuel as an energy-dissipating pathway. Temporal control over amorphous clusters composed of spherical gold nanoparticles (AuNPs) and well-defined core–satellite structures from gold nanorods (AuNRs) and AuNPs is demonstrated. Furthermore, the high specificity of DNA hybridization allowed us to demonstrate selective activation of the evolution of multiple architectures of higher complexity in a single mixture containing small and larger spherical AuNPs and AuNRs.     

Unraveling the Impact of Gold(I)–Thiolate Motifs on the Aggregation-Induced Emission of Gold Nanoclusters

Aggregation-induced emission (AIE) provides an efficient strategy to synthesize highly luminescent metal nanoclusters (NCs), however, rational control of emission energy and intensity of metal NCs is still challenging. This communication reveals the impact of surface Au^I-thiolate motifs on the AIE properties of Au NCs, by employing a series of water-soluble glutathione (GSH)-coordinated Au complexes and NCs as a model ([Au₁₀SR₁₀], [Au₁₅SR₁₃], [Au₁₈SR₁₄], and [Au₂₅SR₁₈]⁻, SR=thiolate ligand). Spectroscopic investigations show that the emission wavelength of Au NCs is adjustable from visible to the near-infrared II (NIR-II) region by controlling the length of the Au^I-SR motifs on the NC surface. Decreasing the length of Au^I-SR motifs also changes the origin of cluster luminescence from AIE-type phosphorescence to Au⁰-core-dictated fluorescence. This effect becomes more prominent when the degree of aggregation of Au NCs increases in solution.     

A Simple Method for Fabrication of Gold Nanoelectrodes

A facile method has been developed for the fabrication of Au nanoelecrodes (Au NEs).The tip of Au NEs can be controlled within the range from dozens to hundreds of nanometer.     

Ultra-Thin Gold Cluster Films by Langmuir–Blodgett-Techniques

The extraordinary electronic properties of the full-shell cluster Au₅₅(PPh₃)₁₂Cl₆ and its ligand modified derivatives make them one of the most attractive building blocks in future nanoelectronics. The reason is the ability to act as a single electron switch or transistor at room temperature. As a consequence of this knowledge, further developments to organize these quantum dots in two dimensions are necessary. In this study, the Langmuir–Blodgett (LB) technique has been applied to generate extended two-dimensionally organized arrangements of Au₅₅(PPh₃)₁₂Cl₆, Au₅₅[(cyclopentyl)₇Si₈O₁₂(CH₂)₃SH]₁₂Cl₆ and of Au₅₅(PhSH) _x Cl₆. Film formation was performed by spreading dichloromethane or pentane solutions of the clusters onto the water surface in a LB trough, followed by compression by means of a film balance. From the π-A isotherms exact cluster dimensions could be calculated from monolayers, except for Au₅₅[(cyclopentyl)₇Si₈O₁₂(CH₂)₃SH]₁₂Cl₆, the size of which resulted as too small. The reason is to be seen in the formation cluster double layers. Brewster angle microscopy (BAM) investigations of the thin films on the water surface, atomic force microscopy (AFM) and transmission electron microscopy (TEM) studies of transferred films clearly demonstrated formation of densely packed monolayers and of double layers, respectively. These extended mono- and double layers are now available for electric investigations and the construction of layered systems. Those works are in progress. Dedicated to Professor Ilya Moiseev on the occasion of his 75th birthday.     

Bovine Serum Albumin Nanospheres Synchronously Encapsulating “Gold Selenium/Gold” Nanoparticles and Photosensitizer for High-Efficiency Cancer Phototherapy

Gold nanostructures have generated significant attention in biomedical areas because of their major role in cancer photothermal therapeutics. In order to conveniently combine gold nanostructures and drugs into one nanocomposite, Au₂Se/Au core–shell nanostructures with strong near-infrared-absorbing properties were synthesized using a simple method and embedded inside bovine serum albumin (BSA) nanospheres by using a spray dryer equipped with an ultrasonic atomizer followed by thermal denaturation. The nanospheres with narrow size distribution mainly ranging from 450 to 600 nm were obtained. The Au₂Se/Au-loaded BSA nanospheres (1 mg) adsorbed at least 0.01 mg of water-insoluble zinc phthalocyanine (ZnPc) photosensitizer. After irradiation with a 655-nm laser (20 min), the temperature of the Au₂Se/Au-loaded BSA nanospheres [200 μL, 2 mg/mL, BSA/Au₂Se/Au 10:1 (w/w)] increased by over 20 °C from the initial temperature of 24.82?±?0.15 °C, and the release of ZnPc was improved compared with a corresponding sample without irradiation. After being incubated with cancer cells (human esophageal carcinoma Eca-109), the nanospheres exhibited photothermal and photodynamic therapy with a synergistic effect upon laser irradiation. This work provides novel Au₂Se/Au-loaded polymer nanospheres prepared by a high-efficiency strategy for incorporating drugs for improving the efficiency in killing cancer cells.     

Small Gold(I) and Gold(I)–Silver(I) Clusters by C−Si Auration

Auration of o-trimethylsilyl arylphosphines leads to the formation of gold and gold–silver clusters with ortho-metalated phosphines displaying 3c–2e Au−C−M bonds (M=Au/Ag). Hexagold clusters [Au₆L₄](X)₂ are obtained by reaction of (L−TMS)AuCl with AgX, whereas reaction with AgX and Ag₂O leads to gold–silver clusters [Au₄Ag₂L₄](X)₂. Oxo-trigold(I) species [Au₃O]⁺ were identified as the intermediates in the formation of the silver-doped clusters. Other [Au₅], [Au₄Ag], and [Au₁₂Ag₄] clusters were also obtained. Clusters containing PAu−Au−AuP structural motif display good catalytic activity in the activation of alkynes under homogeneous conditions.     

Preparation and Characterization of Heparin‐Stabilized Gold Nanoparticles

A simple method for preparing gold nanoparticles in aqueous solution has been developed by using glycosaminoglycan‐heparin as reducing and stabilizing agent and HAuCl₄ as precursor. The obtained gold nanoparticles were characterized by UV‐vis spectroscopy, resonance light scattering spectroscopy (RLS), transmission electron microscopy (TEM) and electrophoresis technology. The influence of reactant concentration for the preparation of gold nanoparticles was investigated. The results indicated that the gold nanoparticles carried negative charges in the aqueous solution and the size and shape of the gold nanoparticles could be controlled by changing the concentration of the heparin. Moreover, the gold nanoparticles obtained with relatively high concentration of heparin were very stable and had relative narrow size distribution.     

Fabrication of Gold Nano‐Structures with Azopolymer Templates

Fabrication of gold nano‐patterns has been demonstrated employing surface relief structures created on films of an azobenzene‐functionalized polymer as templates. The surface relief templates were photoinscribed on the azopolymer films in one‐step with two laser beams. Thin layers of gold were over‐coated on the polymer templates by thermal evaporation. Gold lines of a few hundred nanometer width were successfully fabricated by pyrolyzing the azobenzene polymer. Sub‐micron gold dots were also created. The resulting gold structures exhibited the same periodicity as the polymer templates.