Comparative study of the coordination chemistry and lactide polymerization of alkoxide and amide complexes of zinc and magnesium with a beta-diiminato ligand bearing ether substituents

A series of beta-diiminato complexes of the form (BDI-3)MX where (BDI-3) = [CH(CMeNC(6)H(4)-2-OMe)(2)]; M = Zn, Mg; X = O(i)()Pr, O(t)()Bu, or N(SiMe(3))(2) has been synthesized. The (BDI-3) ligand is bidentate in (BDI-3)ZnN(SiMe(3))(2) and tetradentate in (BDI-3)MgN(SiMe(3))(2). The alkoxide complexes are shown to be active for lactide polymerization. Polymerization of rac-lactide with (BDI-3)ZnO(i)Pr gives a moderate preference for heterotactic PLA. Polymerization of rac-lactide with [(BDI-3)MgO(t)Bu](2) shows a slight preference for heterotactic PLA in CH(2)Cl(2) but is highly stereoselective in THF in the production of heterotactic PLA.     

Activation of carbodiimide and transformation with amine to guanidinate group by Ln(OAr)3(THF)2 (Ln: lanthanide and yttrium) and Ln(OAr)3(THF)2 as a novel precatalyst for addition of amines to carbodiimides: influence of aryloxide group

Reaction of Ln(OAr(1))(3)(THF)(2) (Ar(1)= [2,6-((t)Bu)(2)-4-MeC(6)H(2)] with carbodiimides (RNCNR) in toluene afforded the RNCNR coordinated complexes (Ar(1)O)(3)Ln(NCNR) (R = (i)Pr (isopropyl), Ln = Y (1) and Yb (2); R = Cy (cyclohexyl), Ln = Y (3)) in high yields. Treatment of 1 and 2 with 4-chloroaniline, respectively, at a molar ratio of 1:1 yielded the corresponding monoguanidinate complex (Ar(1)O)(2)Y[(4-Cl-C(6)H(4)N)C(NH(i)Pr)N(i)Pr](THF) (4) and (Ar(1)O)(2)Yb[(4-Cl-C(6)H(4)N)C(NH(i)Pr)N(i)Pr](THF) (5). Complexes 4 and 5 can be prepared by the reaction of Ln(OAr(1))(3)(THF)(2) with RNCNR and amine in toluene at a 1:1:1 molar ratio in high yield directly. A remarkable influence of the aryloxide ligand on this transformation was observed. The similar transformation using the less bulky yttrium complexes Y(OAr(2))(3)(THF)(2) (Ar(2) = [2,6-((i)Pr)(2)C(6)H(3)]) or Y(OAr(3))(3)(THF)(2) (Ar(3) = [2,6-Me(2)C(6)H(3)]) did not occur. Complexes Ln(OAr(1))(3)(THF)(2) were found to be the novel precatalysts for addition of RNCNR with amines, which represents the first example of catalytic guanylation by the lanthanide complexes with the Ln-O active group. The catalytic activity of Y(OAr(1))(3)(THF)(2) was found to be the same as that of monoguanidinate complex 4, indicating 4 is one of the active intermediates in the present process. The other intermediate, amide complex (Ar(1)O)(2)Ln[(2-OCH(3)-C(6)H(4)NH)(2-OCH(3)-C(6)H(4)NH(2))] (6), was isolated by protonolysis of 4 with 2-OCH(3)-C(6)H(4)NH(2). All the complexes were structurally characterized by X-ray single crystal determination.     

Terphenyl substituted derivatives of manganese(II): distorted geometries and resistance to elimination

Reaction of {Li(THF)Ar'MnI(2)}(2) (Ar' = C(6)H(3)-2,6-(C(6)H(2)-2,6-(i)Pr(3))(2)) with LiAr', LiC≡CR (R = (t)Bu or Ph), or (C(6)H(2)-2,4,6-(i)Pr(3))MgBr(THF)(2) afforded the diaryl MnAr'(2) (1), the alkynyl salts Ar'Mn(C≡C(t)Bu)(4){Li(THF)}(3) (2) and Ar'Mn(C≡CPh)(3)Li(3)(THF)(Et(2)O)(2)(μ(3)-I) (3), and the manganate salt {Li(THF)}Ar'Mn(μ-I)(C(6)H(2)-2,4,6-(i)Pr(3)) (4), respectively. Complex 4 reacted with one equivalent of (C(6)H(2)-2,4,6-(i)Pr(3))MgBr(THF)(2) to afford the homoleptic dimer {Mn(C(6)H(2)-2,4,6-(i)Pr(3))(μ-C(6)H(2)-2,4,6-(i)Pr(3))}(2) (5), which resulted from the displacement of the bulkier Ar' ligand in preference to the halogen. The reaction of the more crowded {Li(THF)Ar*MnI(2)}(2) (Ar* = C(6)H(3)-2,6-(C(6)H(2)-2,4,6-(i)Pr(3))(2)) with Li(t)Bu gave complex Ar*Mn(t)Bu (6). Complex 1 is a rare monomeric homoleptic two-coordinate diaryl Mn(II) complex; while 6 displays no tendency to eliminate β-hydrogens from the (t)Bu group because of the stabilization supplied by Ar*. Compounds 2 and 3 have cubane frameworks, which are constructed from a manganese, three carbons from three acetylide ligands, three lithiums, each coordinated by a donor, plus either a carbon from a further acetylide ligand (2) or an iodide (3). The Mn(II) atom in 4 has an unusual distorted T-shaped geometry while the dimeric 5 features trigonal planar manganese coordination. The chloride substituted complex Li(2)(THF)(3){Ar'MnCl(2)}(2) (7), which has a structure very similar to that of {Li(THF)Ar'MnI(2)}(2), was also prepared for use as a possible starting material. However, its generally lower solubility rendered it less useful than the iodo salt. Complexes 1-7 were characterized by X-ray crystallography and UV-vis spectroscopy. Magnetic studies of 2-4 and 6 showed that they have 3d(5) high-spin configurations.     

Preparation of new monoanionic "scorpionate" ligands: synthesis and structural characterization of titanium(IV) complexes bearing this class of ligand

The preparation of new "scorpionate" ligands in the form of the lithium derivatives [(Li(bdmpzdta)(H(2)O))(4)] (1) [bdmpzdta = bis(3,5-dimethylpyrazol-1-yl)dithioacetate], [Li(bdphpza)(H(2)O)(THF)] (2) [bdphpza = bis(3,5-diphenylpyrazol-1-yl)acetate], and [Li(bdphpzdta)(H(2)O)(THF)] (3) [bdphpzdta = bis(3,5-diphenylpyrazol-1-yl)dithioacetate] has been carried out. Furthermore, a series of titanium complexes has been prepared by reaction of TiCl(4)(THF)(2) with the lithium reagents [(Li(bdmpza)(H(2)O))(4)] (4) [bdmpza = bis(3,5-dimethylpyrazol-1-yl)acetate] and 1. Under the appropriate experimental conditions neutral complexes, namely [TiCl(3)(kappa(3)-bdmpza)] (5), [TiCl(3)(kappa(3)-bdmpzdta)] (6), and [TiCl(2)(kappa(2)-bdmpzdta)(2)] (7), and cationic complexes, namely [TiCl(2)(THF)(kappa(3)-bdmpza)]Cl (8) and [TiCl(2)(THF)(kappa(3)-bdmpzdta)]Cl (9), were isolated. Complexes 8 and 9 undergo an interesting nucleophilic THF ring-opening reaction to give the corresponding alkoxide-containing species [TiCl(2)(kappa(3)-bdmpza)(O(CH(2))(4)Cl)] (10) and [TiCl(2)(kappa(3)-bdmpzdta)(O(CH(2))(4)Cl)] (11). A family of alkoxide-containing complexes of general formulas [TiCl(2)(kappa(3)-bdmpza)(OR)] [R = Me (12); R = Et (14); R = (i)Pr (16); R = (t)Bu (18)] and [TiCl(2)(kappa(3)-bdmpzdta)(OR)] [R = Me (13); R = Et (15); R = (i)Pr (17)] was also prepared. The structures of these complexes have been determined by spectroscopic methods, and in addition, the X-ray crystal structures of 3, 7, 10, and 11 were also established.     

Lanthanide borohydride complexes supported by diaminobis(phenoxide) ligands for the polymerization of epsilon-caprolactone and L- and rac-lactide

Reaction of Na2O2NN' [H2O2NN' = (2-C5H4N)CH2N[2-HO-3,5-C6H2(t)Bu2]2] with M(BH4)3(THF)3 afforded the dimeric, rare-earth borohydride compounds [M(O2NN')(mu-BH4)(THF)n]2 [M = Y(III), n = 0.5 (1-Y); M = NdIII, n = 1 (1-Nd); M = SmIII, n = 0 (1-Sm)]. For comparison the chloride analogues [M(O2NN')(mu-Cl)(THF)n]2 (2-M; M = La(III) or Sm(III), n = 0; M = Nd(III), n = 1) and the corresponding pyridine adducts [M(O2NN')(mu-X)(py)]2 [X = BH4 (3-M) or Cl (4-M); M = La(III), Nd(III), or Sm(III)] were prepared and structurally characterized for 4-La. Compounds 1-M initiated the ring-opening polymerization of epsilon-caprolactone. The best molecular weight control (suppression of chain transfer) for all three monomers was found for the samarium system 1-Sm. The most effective heterotactic enrichment (Pr) in the polymerization of rac-lactide was found for 1-Y (P(r) = 87%). Compound 1-Nd catalyzed the block copolymerization of epsilon-caprolactone and L- and rac-lactide provided that epsilon-caprolactone was added first. Attempted block polymerization by the addition of L-lactide first, or random copolymerization of a ca. 1:1 mixture of epsilon-caprolactone and L-lactide, gave only a poly(L-lactide) homopolymer.     

Comments on the ring-opening polymerization of morpholine-2,5-dione derivatives by various metal catalysts and characterization of the products formed in the reactions involving R2SnX2, where X = OPr(i) and NMe2 and R = Bu(n), Ph and p-Me2NC6H4

(3S,6S)-3-Isopropyl-6-methyl-morpholine-2,5-dione (1), and (3S,6S)-3,6-dimethyl-morpholine-2,5-dione (2), do not enter into ring-opening polymerization reactions with metal catalyst precursors commonly employed for lactides, and with Sn(II) octanoate, only low molecular weight oligomers are obtained. Reactions with R2SnX2 compounds, where R = Ph, Bu(n) and p-Me2NC6H4 and X = OPr(i) or NMe2, reveal that ring-opening of the morpholine-2,5-diones does occur, but that polymerization is terminated by the formation of kinetically-inert products such as {Ph2Sn[mu,eta(3)-OCH(Me)CONCH(Pr(i))COOPr(i)]}2 (3), and {[Bu(n))2Sn[mu,eta(3)-OCH(Me)CONCH(Me)CONMe2]}2 (4), with elimination of HX. Ph3SnOPr(i) is seen to react reversibly with morpholine-2,5-diones in toluene-d8 by 1H NMR spectroscopy while (Bu(n))3SnNMe2 reacts by ring opening to give (Bu(n))3SnOCH(Me)C(O)NHCHMeC(O)NMe2. The new organotin compounds have been characterized by 1H, 13C{1H} and 118Sn NMR spectroscopy and compounds 1, 2, 3 and 4 by single crystal X-ray crystallography.     

Dizinc alkoxides and amides supported by binucleating bis(amidoamine) ligands

Several new dizinc complexes that are supported by dianionic bis(amidoamine) ligands are reported. Reaction of N,N'-bis(2-dimethylaminoethyl)dibenzofuran-4,6-diamine ((Me)LH(2)) with 2 equiv of EtZn(O(i)Pr) forms the dizinc bis(alkoxide) (Me)LZn2(O(i)Pr)2 (1), which was isolated in 76% yield. Similarly, (Me)LH2 reacts cleanly with EtZn(OPh) and EtZn(OCHPh2) to form (Me)LZn2(OPh)2 (2) and (Me)LZn2(OCHPh2)2 (3), respectively. The solid-state structures of 1 and 2 feature puckered [Zn2(mu-OR)2]2+ cores, with short intermetal separations (2.81-2.88 Angstroms). Overall, the molecules have approximate (noncrystallographic) C2v symmetry. The use of the more-hindered (i)Pr-substituted ligand N,N'-bis(2-diisopropylaminoethyl)dibenzofuran-4,6-diamine (i(Pr)LH2) to prepare zinc alkoxides gave similar results. Thus, reaction of i(Pr)LH2 with 2 equiv of EtZn(OPh), EtZn(OMe), EtZn(OCHPh2), and EtZn(OCH2Ph) forms i(Pr)LZn2(OPh)2 (4), i(Pr)LZn2(OMe)2 (5), i(Pr)LZn2(OCHPh2)2 (6), and i(Pr)LZn2(OCH2Ph)2 (7), respectively (isolated yields 48-63%). At 70 degrees C, C6D6 solutions of 6 undergo beta-hydride transfer with 2 equiv of benzaldehyde to form 7 and benzophenone in quantitative yield (according to 1H NMR spectroscopy). Benzene solutions of 1 react with 1 equiv of trimethylsilyl trifluoromethanesulfonate (Me3SiOTf) to form (Me)LZn2(O(i)Pr)(OTf) (8) in 70% isolated yield. In the solid state, 8 features a bridging alkoxide donor as well as a 1,3-bridging triflate group. The previously reported dinuclear organozinc species (Me)LZn2Ph2 (9) reacts with 1 equiv of tert-butylamine to form the protonolysis product (Me)LZn2(Ph)(NH(t)Bu) (10) in 66% isolated yield. The solid-state structure of 10 (two independent molecules) reveals a somewhat asymmetric [Zn2(mu-Ph)(mu-NH(t)Bu)]2+ core with short Zn-Zn separations [2.6761(5) and 2.6518(5) Angstroms]. In CD2Cl2 solution, the Ph bridge of 10 undergoes rapid reversible cleavage. Cleavage of this bridging interaction followed by rotation about the Zn-Ph bond and re-formation of the bridging interaction results in exchange of the inequivalent ortho (and meta) protons of the phenyl ligand. Variable-temperature 1H NMR spectroscopic data indicate that this exchange occurs with DeltaG = 12.7(1) kcal.mol(-1) (-27 degrees C). At 75 degrees C, toluene solutions of (Me)LH2 react with 2 equiv of EtZnNH(t)Bu to form the dizinc bis(amido) product (Me)LZn2(NH(t)Bu)2 (11) in 46% isolated yield. The solid-state structure of 11 (two independent molecules) features a puckered and fairly symmetric [Zn2(mu-NH(t)Bu)2]2+ core with short intermetal separations [2.775(1), 2.760(1) Angstroms].     

Oxidative Addition of Group 14 Element Hydrido Compounds to OsH(2)(eta(2)-CH(2)=CHEt)(CO)(P(i)Pr(3))(2): Synthesis and Characterization of the First Trihydrido-Silyl, Trihydrido-Germyl, and Trihydrido-Stannyl Derivatives of Osmium(IV)

The dihydrido-olefin complex OsH(2)(eta(2)-CH(2)=CHEt)(CO)(P(i)Pr(3))(2) (2) reacts with H(2)SiPh(2) to give OsH(3)(SiHPh(2))(CO)(P(i)Pr(3))(2) (3). The molecular structure of 3 has been determined by X-ray diffraction (monoclinic, space group P2(1)/c with a = 16.375(2) ?, b = 11.670(1) ?, c =18.806(2) ?, beta = 107.67(1) degrees, and Z = 4) together with ab initio calculations on the model compound OsH(3)(SiH(3))(CO)(PH(3))(2). The coordination geometry around the osmium center can be rationalized as a heavily distorted pentagonal bipyramid with one hydrido ligand and the carbonyl group in the axial positions. The two other hydrido ligands lie in the equatorial plane, one between the phosphine ligands and the other between the SiHPh(2) group and one of the phosphine ligands. Complex 3 can also be prepared by reaction of OsH(eta(2)-H(2)BH(2))(CO)(P(i)Pr(3))(2) (4) with H(2)SiPh(2). Similarly, the treatment of 4 with HSiPh(3) affords OsH(3)(SiPh(3))(CO)(P(i)Pr(3))(2) (5), while the addition of H(3)SiPh to 4 in methanol yields OsH(3){Si(OMe)(2)Ph}(CO)(P(i)Pr(3))(2) (6). Complex 2 also reacts with HGeR(3) and HSnR(3) to give OsH(3)(GeR(3))(CO)(P(i)Pr(3))(2) (GeR(3) = GeHPh(2) (7), GePh(3) (8), GeEt(3) (9)) and OsH(3)(SnR(3))(CO)(P(i)Pr(3))(2) (R = Ph (10), (n)Bu (11)), respectively. In solution, compounds 3 and 5-11 are fluxional and display similar (1)H and (31)P{(1)H} NMR spectra, suggesting that they possess a similar arrangement of ligands around the osmium atom.     

Synthesis and characterization of mononuclear iron silanethiolato complexes containing an unsupported Fe-S-Si bond system: X-ray crystal structure of CpFe(CO)2SSiPh3 and its reaction with SO2

Mononuclear iron silanethiolato complexes of the type CpFe(CO)(2)SSiR(3), where R = Ph (1a) and (i)()Pr (1b), were prepared via treatment of [CpFe(CO)(2)(THF)]BF(4) with LiSSiPh(3).Et(2)O and NaSSi(i)()Pr(3), respectively. The molecular structure of 1a was determined by X-ray crystallography. Complex 1a was reacted with 1 equiv of SO(2) to give the corresponding O-silyl thiosulfite, CpFe(CO)(2)SS(O)OSiPh(3) (2), via 1,2-insertion of SO(2) into the S-Si bond. This reaction models the activation of SO(2) in the homogeneously catalyzed Claus process.     

Cubic and spirocyclic radicals containing a tetraimidophosphate dianion [P(NR)3(NR')]*2-

The reaction of Cl(3)PNSiMe(3) with 3 equiv of LiHNR (R = (i)Pr, Cy, (t)Bu, Ad) in diethyl ether produces the corresponding tris(amino)(imino)phosphoranes (RNH)(3)PNSiMe(3) (1a, R = (i)Pr; 1b, R = Cy; 1c, R = (t)Bu; 1d, R = Ad); subsequent reactions of 1b-d with (n)BuLi yield the trilithiated tetraimidophosphates {Li(3)[P(NR)(3)(NSiMe(3))]} (2a, R = Cy; 2b, R = (t)Bu; 2c, R = Ad). The reaction of [((t)BuNH)(4)P]Cl with 1 equiv of (n)BuLi results in the isolation of ((t)BuNH)(3)PN(t)Bu (1e); treatment of 1e with additional (n)BuLi generates the symmetrical tetraimidophosphate {Li(3)[P(N(t)Bu)(4)]} (2d). Compounds 1 and 2 have been characterized by multinuclear ((1)H, (13)C, and (31)P) NMR spectroscopy; X-ray structures of 1b,c were also obtained. Oxidations of 2a-c with iodine, bromine, or sulfuryl chloride produces transient radicals in the case of 2a or stable radicals of the formula {Li(2)[P(NR)(3)(NSiMe(3))]LiX.3THF}* (X = Cl, Br, I; R = (t)Bu, Ad). The stable radicals exhibit C(3) symmetry and are thought to exist in a cubic arrangement, with the monomeric LiX unit bonded to the neutral radical {Li(2)[P(NR)(3)(NSiMe(3))]}* to complete the Li(3)N(3)PX cube. Reactions of solvent-separated ion pair {[Li(THF)(4)]{Li(THF)(2)[(mu-N(t)Bu)(2)P(mu-N(t)Bu)(2)]Li(THF)(2)} (6) with I(2) or SO(2)Cl(2) produce the persistent spirocyclic radical {(THF)(2)Li(mu-N(t)Bu)(2)P(mu-N(t)Bu)Li(THF)(2)}* (10a); all radicals have been characterized by a combination of variable concentration EPR experiments and DFT calculations.     

Amidinate-carboxylate complexes of dimolybdenum and ditungsten: M2(O2CR)2((NiPr)2CR')2. Preparations, molecular and electronic structures and reactions.

The compounds M(2)(O(2)CMe)(4) and the lithium amidinates Li[(N(i)Pr)(2)CR] react to give the new compounds trans-M(2)(O(2)CMe)(2)[(N(i)Pr)(2)CR](2) where M = Mo or W and R = Me (M = Mo only), -C[triple bond]C(t)Bu, -C[triple bond]CPh and -C[triple bond]C-Fc where Fc = 1-ferrocenyl. The limitations of this type of reaction are described based on steric considerations together with the preparation and characterization of the compound Mo(2)(micro-O(2)C-9-anthracene)(2)[eta(2)-(N(i)Pr)(2)CMe](2). The electronic structures of the bis-amidinate-bis-carboxylate M(2) complexes are described based on model compounds employing density functional theory and are correlated with the experimental observations of their physicochemical properties and in particular their observed electronic absorption spectra which show intense MLCT absorption bands. Preliminary studies of the reactions of these bis-amidinate-bis-carboxylate complexes in the preparation of 1-D oligomers are also described along with the preparation and molecular structures of the compounds [Li(N(i)Pr)(2)CR.THF](2) where R = 2-thienyl or -C[triple bond]C-Ph. The kinetic lability of these new M(2)-containing compounds toward ligand exchange is also noted.     

Syntheses, structures and properties of a series of non-heme alkoxide-Fe(III) complexes of a benzimidazolyl-rich ligand as models for lipoxygenase

The treatment of Fe(ClO(4))(2)·6H(2)O or Fe(ClO(4))(3)·9H(2)O with a benzimidazolyl-rich ligand, N,N,N',N'-tetrakis[(1-methyl-2-benzimidazolyl)methyl]-1,2-ethanediamine (medtb) in alcohol/MeCN gives a mononuclear ferrous complex, [Fe(II)(medtb)](ClO(4))(2)·?CH(3)CN·?CH(3)OH (1), and four non-heme alkoxide-iron(III) complexes, [Fe(III)(OMe)(medtb)](ClO(4))(2)·H(2)O (2, alcohol = MeOH), [Fe(III)(OEt)(Hmedtb)](ClO(4))(3)·CH(3)CN (3, alcohol = EtOH), [Fe(III)(O(n)Pr)(Hmedtb)](ClO(4))(3)·(n)PrOH·2CH(3)CN (4, alcohol = n-PrOH), and [Fe(III)(O(n)Bu)(Hmedtb)](ClO(4))(3)·3CH(3)CN·H(2)O (5, alcohol = n-BuOH), respectively. The alkoxide-iron(III) complexes all show 1) a Fe(III)-OR center (R = Me, 2; Et, 3; (n)Pr, 4; (n)Bu, 5) with the Fe-O bond distances in the range of 1.781-1.816 ?, and 2) a yellow color and an intense electronic transition around 370 nm. The alkoxide-iron(III) complexes can be reduced by organic compounds with a cis,cis-1,4-diene moiety via the hydrogen atom abstraction reaction.     

The first bridged lanthanide carbene complex formed through reduction of carbodiimide by diamine-bis(phenolate) ytterbium(II) complex and its reactivity to phenylisocyanate

The reaction of YbL(THF)(2) (L = [-OC(6)H(2)(2,4-(t)Bu(2))(6-CH(2))](2)NCH(2)CH(2)NMe(2)) with (i)PrN=C=N(i)Pr led to the bridged carbene ytterbium complex (YbL)(2)(μ-N(i)PrCN(i)Pr) via a two-electron reduction process of carbodiimide, which reacted with PhNCO to afford a dinuclear ytterbium complex and a spiro derivative.     

Extraction and coordination studies of the unexplored bifunctional ligand carbamoyl methyl sulfoxide (CMSO) with uranium(VI) and cerium(III) nitrates. Synthesis and structures of [UO2(NO3)2(PhSOCH2CON(i)Bu2)] and [Ce(NO3)3(PhSOCH2CONBu2)2

The bifunctional carbamoyl methyl sulfoxide ligands, PhCH(2)SOCH(2)CONHPh (L1), PhCH(2)SOCH(2)CONHCH(2)Ph (L2), PhSOCH(2)CON(i)Pr(2)(L3), PhSOCH(2)CONBu(2)(L4), PhSOCH(2)CON(i)Bu(2)(L5) and PhSOCH(2)CON(C(8)H(17))(2)(L6) have been synthesized and characterized by spectroscopic methods. The selected coordination chemistry of L1, L3, and L5with [UO(2)(NO(3))(2)] and [Ce(NO(3))(3)] has been evaluated. The structures of the compounds [UO(2)(NO(3))(2)(PhSOCH(2)CON(i)Bu(2))](10) and [Ce(NO(3))(3)(PhSOCH(2)CONBu(2))(2)](12) have been determined by single crystal X-ray diffraction methods. Preliminary extraction studies of ligand L6 with U(VI), Pu(IV) and Am(III) in tracer level showed an appreciable extraction for U(VI) and Pu(IV) in up to 10 M HNO(3) but not for Am(III). Thermal studies on compounds 8 and 10 in air revealed that the ligands can be destroyed completely on incineration. The electron spray mass spectra of compounds 8 and 10 in acetone show that extensive ligand distribution reactions occur in solution to give a mixture of products with ligand to metal ratios of 1: 1 and 2 :1. However, 10 retains its solid state structure in CH(2)Cl(2).     

Synthesis and characterization of organo-scandium and yttrium complexes stabilized by phosphinoamide ligands

Addition of three equivalents of phosphinoamine, (ArNHP(i)Pr(2)) [Ar = 3,5-dimethylphenyl] to M(CH(2)SiMe(3))(3)(THF)(2) [M = Sc, Y] precursors gives complexes of the form (ArNP(i)Pr(2))(3)M(THF) [M = Sc, Y]. In the case of scandium, addition of Sc(CH(2)SiMe(3))(3)(THF)(2) to (ArNP(i)Pr(2))(3)Sc(THF) affords (ArNP(i)Pr(2))(2)Sc(CH(2)SiMe(3))(THF), which has been isolated and structurally characterized. In contrast, addition of Y(CH(2)SiMe(3))(3)(THF)(2) to (ArNP(i)Pr(2))(3)Y(THF) generates a distribution of phosphinoamide-containing products consistent with the formulations (ArNP(i)Pr(2))(2)Y(CH(2)SiMe(3))(THF) and (ArNP(i)Pr(2))Y(CH(2)SiMe(3))(2)(THF), as ascertained using NMR spectroscopy. Attempts to react the alkyl-containing phosphinoamide complexes with small molecules such as H(2) led to disproportionation type processes.     

Aggregation of [(tBu3SiS)MX]: structures of {[Br2Fe(mu-SSitBu3)2)FeBr(THF)]Na(THF)4}infinity, cis-[(THF)FeI]2(mu-SSitBu3)2, [(tBu3SiS)Fe]2(mu-SSitBu3)2, and comparative structure and magnetism studies of [(tBu3SiS)MX]n (M = Fe, Co, X = Cl, n = 12; M = Fe, Ni, X = Br, n = 12; M = Fe, X = I, n = 14)

A convenient synthesis of (t)Bu(3)SiSH and (t)Bu(3)SiSNa(THF)(x)() led to the exploration of "(t)Bu(3)SiSMX" aggregation. The dimer, [((t)Bu(3)SiS)Fe](2)(mu-SSi(t)Bu(3))(2) (1(2)), was formed from [{(Me(3)Si)(2)N}Fe](2)(mu-N(SiMe(3))(2))(2) and the thiol, and its dissolution in THF generated ((t)Bu(3)SiS)(2)Fe(THF)(2) (1-(THF)(2)). Metathetical procedures with the thiolate yielded aggregate precursors [X(2)Fe](mu-SSi(t)Bu(3))(2)[FeX(THF)]Na(THF)(4) (3-X, X = Cl, Br) and cis-[(THF)IFe](2)(mu-SSi(t)Bu(3))(2) (4). Thermal desolvations of 3-Cl, 3-Br and 4 afforded molecular wheels [Fe(mu-X)(mu-SSi(t)Bu(3))](12)(C(6)H(6))(n) (5-FeX, X = Cl, Br) and the ellipse [Fe(mu-I)(mu-SSi(t)Bu(3))](14)(C(6)H(6))(n) (6-FeI). Related metathesis and desolvation sequences led to wheels [Co(mu-Cl)(mu-SSi(t)Bu(3))](12)(C(6)H(6))(n) (5-CoCl) and [Ni(mu-Br)(mu-SSi(t)Bu(3))](12)(C(6)H(6))(n) (5-NiBr). The nickel wheel disproportionated to give, in part, [((t)Bu(3)SiS)Ni](2)(mu-SSi(t)Bu(3))(2) (7), which was also synthesized via salt metathesis. X-ray structural studies of 1(2) revealed a roughly planar Fe(2)S(4) core, while 1-(THF)(2), 3-Br, and 4 possessed simple distorted tetrahedral and edge-shared tetrahedral structures. X-ray structural studies revealed 5-MX (MX = FeCl, FeBr, CoCl, NiBr) to be wheels based on edge-shared tetrahedra, but while the pseudo-D(6)(d) wheels of 5-FeCl, 5-CoCl, and 5-FeBr pack in a body-centered arrangement, those of pseudo-C(6)(v)() 5-NiBr exhibit hexagonal packing and two distinct trans-annular d(Br...Br). Variable-temperature magnetic susceptibility measurements were conducted on 5-FeCl, 5-CoCl, 5-FeBr, and 6-FeI, and the latter three are best construed as weakly antiferromagnetic, while 5-FeCl exhibited modest ferromagnetic coupling. Features suggesting molecular magnetism are most likely affiliated with phase changes at low temperatures.     

Unprecedented examples of heterobimetallic cerium(IV) disiloxanediolates

The first disiloxanediolate complexes of cerium(IV) are reported. Starting from the readily available precursor ((t)BuO)(3)Ce(IV)(NO(3))(THF)(2) (1), we prepared the novel heterobimetallic compounds [{(Ph(2)SiO)(2)O}{K(THF)(2)}](2)Ce(O(t)Bu)(2) (2) and [{(Ph(2)SiO)(2)O}(2){(DME)-KO(t)Bu}{(Ph(2)SiO(2))K}Ce](2) (3) and structurally characterized them by X-ray diffraction.     

Large effects of ion pairing and protonic-hydridic bonding on the stereochemistry and basicity of crown-, azacrown-, and cryptand-222-potassium salts of anionic tetrahydride complexes of iridium(III)

The compounds [K(Q)][IrH(4)(PR(3))(2)] (Q = 18-crown-6, R = Ph, (i)Pr, Cy; Q = aza-18-crown-6, R = (i)Pr; Q = 1,10-diaza-18-crown-6, R = Ph, (i)Pr, Cy; Q = cryptand-222, R = (i)Pr, Cy) were formed in the reactions of IrH(5)(PR(3))(2) with KH and Q. In solution, the stereochemistry of the salts of [IrH(4)(PR(3))(2)](-) is surprisingly sensitive to the countercation: either trans as the potassium cryptand-222 salts (R = Cy, (i)Pr) or exclusively cis (R = Cy, Ph) as the crown- and azacrown-potassium salts or a mixture of cis and trans (R = (i)Pr). There is IR evidence for protonic-hydridic bonding between the NH of the aza salts and the iridium hydride in solution. In single crystals of [K(18-crown-6)][cis-IrH(4)(PR(3))(2)] (R = Ph, (i)Pr) and [K(aza-18-crown-6)][cis-IrH(4)(P(i)Pr(3))(2)], the potassium bonds to three hydrides on a face of the iridium octahedron according to X-ray diffraction studies. Significantly, [K(1,10-diaza-18-crown-6)][trans-IrH(4)(P(i)Pr(3))(2)] crystallizes in a chain structure held together by protonic-hydridic bonds. In [K(1,10-diaza-18-crown-6)][cis-IrH(4)(PPh(3))(2)], the potassium bonds to two hydrides so that one NH can form an intra-ion-pair protonic-hydridic hydrogen bond while the other forms an inter-ion-pair NH.HIr hydrogen bond to form chains through the lattice. Thus, there is a competition between the potassium and NH groups in forming bonds with the hydrides on iridium. The more basic P(i)R(3) complex has the lower N-H stretch in the IR spectrum because of stronger N[bond]H...HIr hydrogen bonding. The trans complexes have very low Ir-H wavenumbers (1670-1680) due to the trans hydride ligands. The [K(cryptand)](+) salt of [trans-IrH(4)(P(i)Pr(3))(2)](-) reacts with WH(6)(PMe(2)Ph)(3) (pK(alpha)(THF) 42) to give an equilibrium (K(eq) = 1.6) with IrH(5)(P(i)Pr(3))(2) and [WH(5)(PMe(2)Ph)(3)](-) while the same reaction of WH(6)(PMe(2)Ph)(3) with the [K(18-crown-6)](+) salt of [cis-IrH(4)(P(i)Pr(3))(2)](-) has a much larger equilibrium constant (K(eq) = 150) to give IrH(5)(P(i)Pr(3))(2) and [WH(5)(PMe(2)Ph)(3)](-); therefore, the tetrahydride anion displays an unprecedented increase (about 100-fold) in basicity with a change from [K(crypt)](+) to [K(crown)](+) countercation and a change from trans to cis stereochemistry. The acidity of the pentahydrides decrease in THF as IrH(5)(P(i)Pr(3))(2)/[K(crypt)][trans-IrH(4)(P(i)Pr(3))(2)] (pK(alpha)(THF) = 42) > IrH(5)(PCy(3))(2)/[K(crypt)][trans-IrH(4)(PCy(3))(2)] (pK(alpha)(THF) = 43) > IrH(5)(P(i)Pr(3))(2)/[K(crown)][cis-IrH(4)(P(i)Pr(3))(2)] (pK(alpha)(THF) = 44) > IrH(5)(PCy(3))(2)/[K(crown)][cis-IrH(4)(PCy(3))(2)]. The loss of PCy(3) from IrH(5)(PCy(3))(2) can result in mixed ligand complexes and H/D exchange with deuterated solvents. Reductive cleavage of P-Ph bonds is observed in some preparations of the PPh(3) complexes.     

Bis(imino)pyridine ligand deprotonation promoted by a transient iron amide

Addition of 2 equiv of LiNMe(2) to the bis(imino)pyridine ferrous dichloride, ((i)(Pr)PDI)FeCl(2) ((i)(Pr)PDI = (2,6-(i)()Pr(2)-C(6)H(3)N=CMe)(2)C(5)H(3)N), resulted in deprotonation of the chelate methyl groups, yielding the bis(enamide)pyridine iron dimethylamine adduct, ((i)(Pr)PDEA)Fe(NHMe(2)) ((i)(Pr)PDEA = (2,6-(i)Pr(2)-C(6)H(3)NC=CH(2))(2)C(5)H(3)N). Performing a similar procedure with KN(SiMe(3))(2) in THF solution afforded the corresponding bis(THF) adduct, ((i)(Pr)PDEA)Fe(THF)(2). ((i)(Pr)PDEA)Fe(NHMe(2)) has also been prepared by addition of the free amine to the iron dialkyl complex, ((i)(Pr)PDI)Fe(CH(2)SiMe(3))(2), implicating formation of a transient iron amide that is sufficiently basic to deprotonate the bis(imino)pyridine methyl groups. Deprotonation of the amine ligand in ((i)(Pr)PDEA)Fe(NHMe(2)) has been accomplished by addition of amide bases to afford the ferrous amide-ate complexes, [((i)(Pr)PDEA)Fe(mu-NMe(2))M] (M = Li, K).     

Lithiation of tris(alkyl- and arylamido)orthophosphates EP[N(H)R]3 (E = O,S, Se): imido substituent effects and P=E bond cleavage

In the solid state, OP[N(H)Me](3) (1a) and OP[N(H)(t)Bu](3) (1b) have hydrogen-bonded structures that exhibit three-dimensional and one-dimensional arrays, respectively. The lithiation of 1b with 1 equiv of (n)BuLi generates the trimeric monolithiated complex (THF)[LiOP(N(t)Bu)[N(H)(t)Bu](2)](3) (4), whereas reaction with an excess of (n)BuLi produces the dimeric dilithium complex [(THF)(2)Li(2)OP(N(t)Bu)(2)[N(H)(t)Bu]](2) (5). Complex 4 contains a Li(2)O(2) ring in an open-ladder structure, whereas 5 embraces a central Li(2)O(2) ring in a closed-ladder arrangement. Investigations of the lithiation of tris(alkyl or arylamido)thiophosphates, SP[N(H)R](3) (2a, R = (i)Pr; 2b, R = (t)Bu; 2c, R = p-tol) with (n)BuLi reveal interesting imido substituent effects. For the alkyl derivatives, only mono- or dilithiation is observed. In the case of R = (t)Bu, lithiation is accompanied by P-S bond cleavage to give the dilithiated cyclodiphosph(V/V)azane [(THF)(2)Li(2)[((t)BuN)(2)P(micro-N(t)Bu)(2)P(N(t)Bu)(2)]] (9). Trilithiation occurs for the triaryl derivatives EP[N(H)Ar](3) (E = S, Ar = p-tolyl; E = Se, Ar = Ph), as demonstrated by the preparation of [(THF)(4)Li(3)[SP(Np-tol)(3)]](2) (10) and [(THF)(4)Li(3)[SeP(NPh)(3)]](2) (11), which are accompanied by the formation of small amounts of 10.[LiOH(THF)](2) and 11.Li(2)Se(2)(THF)(2), respectively.