Phase composition, electroconductivity, oxygen ion transport number, and microhardness of Ln1 ? xSrxGa0.5 ? y/2Al0.5 ? y/2MgyO3 ? δ (Ln = La, Pr, Nd; x, y = 0.10, 0.15)

Phase composition, electroconductivity, oxygen ion transport number, and microhardness of samples of Ln_{1 − x} Sr_xGa_{0.5 − y/2}Al_{0.5 − y/2}Mg_yO_{3 − δ} (Ln = La, Pr, Nd; x, y = 0.10, 0.15) synthesized by a ceramic methods are studied. Methods of x-ray diffraction analysis and scanning electron microscopy reveal the La-containing samples to be homogeneous and have a perovskite structure. Magnesium does not dissolve in Pr-and Nd-containing systems but forms an individual phase based on magnesium oxide. Apart from magnesium oxide, in these systems there form extrinsic phases, specifically, LnSrGa₃O₇ and an unknown phase. The electroconductivity of La_{1 − x} Sr_xGa_{1 − y} Mg_yO_{3 − δ} decreases after substituting Al for Ga. Ceramic La_{1 − x} Sr_xGa_{0.5 − y/2}Al_{0.5 − y/2}Mg_yO_3−δ is a purely ionic conductor in the temperature interval 500 to 1000°C; Nd_xSr_xGa_{0.5 − y/2}Al_{0.5 − y/2}Mg_yO_{3 − δ} has predominantly ionic conduction; and the predominant type of conduction in Pr_{1 − x} Sr_xGa_{0.5 − y/2}Al_{0.5 − y/2}Mg_yO_{3 − δ} is electronic below 700–800°C, with the contribution of ionic conduction increasing at higher temperatures. Substituting Al for Ga raises the hardness of ceramics under study. Among the compositions studied, La_0.85Sr_0.15Ga_0.45Al_0.45Mg_0.10O_{3 − δ} and La_0.85Sr_0.15Ga_0.425Al_0.425Mg_0.15O_{3 − δ} exhibit a combination of electroconductivity and hardness that is optimal for application as electrolyte at reduced temperatures (600–800°C). The Pr_{1 − x} Sr_xGa_{0.5 − y/2}Al_{0.5 − y/2}Mg_yO_{3 − δ} system possesses mixed ionic-electronic conduction and high hardness, which makes it appealing for application as oxygen-penetrable membranes. Original Russian Text ? Yu.V. Danilov, A.D. Neuimin, L.A. Dunyushkina, L.A. Kuz’mina, N.S. Zybko, Z.S. Martem’yanova, A.A. Pankratov, 2007, published in Elektrokhimiya, 2007, Vol. 43, No. 1, pp. 57–65.     

State of atoms and interatomic interactions in complex perovskite-like oxides: XXX. Influence of the nature of diamagnetic substituents on the dynamics of clustering in lanthanum gallate doped with strontium,chromium, and magnesium

The fractions of clusters and single chromium atoms were calculated by the diluted solution and Heisenberg-Dirac-van-Vleck models for a series of solid solutions containing chromium, strontium, and magnesium in the ratio 5:1:1, respectively. A principal genetic relationship was revealed between La_1−0.2x Sr_0.2x ·Cr _x Ga_1−x O_3−δ, La_1−0.5x Sr_0.5x Cr _x Ga_1−x O_3−δ, and La_1−0.2x Sr_0.2x Cr _x Ga_1−1.2x Mg_0.2x O_3−δ systems. Deviations from Curie-Weiss law are observed for the systems with the ratio [Cr]:[Sr]:[Mg]=5:1:1, which point to a noncompensated magnetic moment.     

Stability of the anatase phase in nanodimensional titanium dioxide doped with europium(III), samarium(III), and iron(III)

lid solutions Ti_1−x M _x O_2−x/2 in the anatase and rutile forms were obtained from the precursors Ti_1−x M _x (OCH₂CH₂O)_2−x/2 at T = 450–900 °C. The temperature and concentration dependence of the phase transformation of anatase to rutile in Ti_1−x M _x O_2−x/2 was investigated by Raman spectroscopy. It was shown that the anatase phase is stabilized most effectively by the Eu³⁺ dopant.     

Synthesis, characterization, and electrical conductivity of new Aurivillius-type oxide-ion conductor

A new oxide-ion conductor of Aurivillius family with a general formula Bi₂Al _x V_{1 − x} O_{5.5 − x − δ}; 0 ≤ x ≤ 0.20 (BIALVOX) was synthesized by the sol-gel citrate route. Powder X-ray diffraction and simultaneous thermogravimetric and differential thermal analyses confirmed that the calcination of BIALVOX xerogels is fully completed at around 500°C after three hours of thermal treatment. It has been found that the β-orthorhombic phase is stabilized with compositions x ≤ 0.07, whereas the stabilization of the γ′-phase takes place for x ≥ 0.10. AC impedance spectroscopic investigation suggested that the charge accumulation at grain boundaries is thermally activated process. However, the maximum electrical conductivity (7.73 × 10⁻⁵ S cm⁻¹) noticed for BIALVOX.13 at 300°C was attributed to the maximum vacancy concentration in the equatorial planes, responsible for the ion diffusion through the structure. This has been further evidenced by the temperature dependence of dielectric permittivity.     

Synthesis and photocatalytic activity of Ti[1 ? x]VxO[2 ? y]Cy whiskers in hydroquinone oxidation in aqueous solutions

Ti_1−x V _x O_2−y C _y (0 ≤ x ≤ 0.10 and x = 0.50) whiskers having the anatase structure were synthesized via thermolysis of vanadium-doped titanium glycolate of composition Ti_1−x V _x (OCH₂CH₂O)₂ (0 ≤ x ≤ 0.10 and x = 0.50). The starting reagents used to prepare Ti_1−x V _x (OCH₂CH₂O)₂ were mixtures of coprecipitated titanium and vanadyl hydroxides, which were heated in ethylene glycol at T ≤ 200°C: (1 − x)TiO(OH)₂ + xVO(OH)₂ + 2HOCH₂CH₂OH = Ti_1−x V _x (OCH₂CH₂O)₂ + 3H₂O↑. Thermolysis of vanadium-doped titanium glycolate in various gas media over a wide range of temperatures is useful to prepare titania samples doped with both vanadium and carbon to form a phase of the general composition Ti_{1 − x} V _x O_{2 − y} C _y whiskers prepared by thermolyzing Ti_{1 − x} V _x (OCH₂CH₂O)₂ in air at 450°C were found to have a high photocatalytic activity in hydroquinone oxidation in aqueous solutions irradiated in the UV spectral range; the photocatalyst’s activity increases with increasing vanadium concentration. When hydroquinone was irradiated in the blue, the maximal catalytic activity was discovered in a sample of composition Ti_0.50V_0.50O_2−y C _y . Quantum-chemical calculations support experimental data that the double doping of titania (Ti_1−x V _x O_2−y C _y ) enhances its photocatalytic activity compared to undoped anatase or anatase doped in one sublattice: Ti_1−x V _x O₂ and TiO_2−y C _y .     

Structural and thermal stability of BIMEVOX oxygen semiconductors

The results on the structural and thermal stability of different modifications of solid solutions Bi₄V_{2 − x} Fe _x O_{11 − δ} (BIFEVOX), where x = 0.05–0.6, and Bi₄V_{2 − x} Cu _x/2Ti _x/2O_{11 − δ} (BICUTIVOX), where x = 0.025–0.50, are shown. The stability is assessed by varying the thermodynamic parameters of the medium and also the time parameters with the use of modern methods, namely, the high-temperature X-ray diffraction analysis, the differential scanning calorimetry, and the dilatometry. The γ-modification of BIFEVOX is shown to be stable in a wide range of temperatures and oxygen partial pressures.     

Investigation of s, p, d-element Niobates and Their Solid Solution Formation Processes by Thermal Analysis

The binary and ternary systems M'O(M'CO₃)-Nb₂O₅ and M'O(M'CO₃)-MO-Nb₂O₅, where M'=Ca,Sr and Ba and M=Cu, Ni, Cd, Zn and Pb, were investigated by means of thermal analysis in the temperature range 20–1500°C. The boundaries of stability of the solid solutions Sr_2−xMe_xNb₂O₇,Sr_2−xM_xNb₂O₇, Sr_4−xM_xNb₂O₉ and Sr_6−xM_xNb₂O₁₁ were determined by means of X-ray diffraction, and IR and Raman spectroscopy. The possibility of prognostication of the phase fields of stable solid solutions by calculation from the diagrams of the ‘comparative electronegativity of atoms vs. tolerance factor’ was demonstrated. The kinetic parameters of the interactions in theSrCO₃+MO+Nb₂O₅ powder mixtures were established. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis,region of existence,structural characteristics,and conductivity of BI(CR,FE)VOX solid solutions

The results of our studies of solid solutions of the general composition Bi₄V_{2 − x} Fe _x/2Cr _x/2O_{11 − δ} are presented. The crystal-chemical parameters of different polymorphic modifications of BIMEVOX were determined. The particle size distribution was determined by laser diffraction and optical microscopy. The surface of sintered preforms was studied by scanning electron microscopy. The conductivity of sintered poly-crystalline samples as a function of temperature and composition was studied by impedance spectroscopy. The conductivity was depends on the procedure for the synthesis of solid solutions. The most promising compositions were revealed.     

Total and hole conductivity in the BaZr1 ? xYxO3 ? α system (x = 0.02?0.20) in oxidizing atmosphere

The total and hole (p-type) conductivities are measured in the BaZr_{1 − x} Y _x O_{3 − α} system (x = 0.02−0.20) in the temperature range of 600–900°C as a function of air humidity (pH₂O = 0.04−3.17 kPa). The model of defect formation in BaZr_{1 − x} Y _x O_{3 − α} oxides in the presence of water vapor is discussed and the literature data are analyzed.     

Ionic, proton, and oxygen conductivities in the BaZr1 ? xYxO3 ? α system (x = 0.02?0.15) in humid air

Ionic, proton, and oxygen conductivities are measured as functions of air humidity (pH₂O = 0.04−3.57 kPa) in the BaZr_{1 − x} Y _x O_{3 − α} system (x = 0.02−0.15) over the temperature range 600–900°C. The important result is obtained that dissolved water vapor determines not only proton transport, but also the overwhelming part of oxygen transport in BaZr_{1 − x} Y _x O_{3 − α}.     

Platinum electrocatalysts based on oxide supports for hydrogen and methanol fuel cells

Platinum electrocatalysts for fuel cells based on individual oxides Pt/SnO₂ and Pt/TiO₂ and their solid solutions Pt/Ti_1−x M _x O₂ (M = Ru, Nb) and Pt/Sn_1−x M′ _x O_2−δ(M′ = Sb, Ru) were prepared. The influence of the composition of the oxide supports on the activity of the supported platinum catalysts in electrooxidation of methanol and hydrogen in the presence of CO was studied. The prepared platinum catalysts supported on solid solutions of tin dioxide Sn_1−x M _x O_2−δ(M = Sb, Ru; x = 0.4−0.9) and Ti_1−x M _x O₂ (M = Ru, Nb; x = 0.7) exhibited higher tolerance to CO poisoning and higher activities for methanol electrooxidation than commercial Pt,Ru catalysts on carbon support. The use of the proposed oxide supported catalysts in hydrogen and direct methanol fuel cells improved their performances in comparison with that for the fuel cells with traditional Pt,Ru catalysts on carbon support.     

Synthesis and structure of quasi-one-dimensional zinc oxide doped with manganese

Nanotubes of manganese-doped zinc oxide Zn_{1 − x} Mn _x O (0 ≤ x ≤ 0.2) were synthesized by heating the Zn_{1 − x} Mn _x (HCOO)(OCH₂CH₂O)_1/2 precursor in air at 500°C. The precursor with extended crystals was synthesized by a solvothermal method based on heat treatment of a mixture of Zn_{1 − x} Mn _x (HCOO)₂ · 2H₂O with an ethylene glycol excess at 100–130°C. The tubular morphology of Zn_{1 − x} Mn _x O particles was identified by transmission electron microscopy. Tubular quasi-one-dimensional particles were shown to have a nanodispersed polycrystalline structure, the size of separate crystallites being from 5 to 20 nm. X-ray photoelectron spectroscopy suggested that the manganese distribution on the outer surface layer of Zn_{1 − x} Mn _x O nanotubes is nonuniform.     

Recent advances in layered LiNi x CoyMn1−x−y O2 cathode materials for lithium ion batteries

Lithium cobalt oxide, LiCoO₂, has been the most widely used cathode material in commercial lithium ion batteries. Nevertheless, cobalt has economic and environmental problems that leave the door open to exploit alternative cathode materials, among which LiNi _x Co_yMn_{1 − x − y} O₂ may have improved performances, such as thermal stability, due to the synergistic effect of the three ions. Recently, intensive effort has been directed towards the development of LiNi _x Co _y Mn_{1 − x − y} O₂ as a possible replacement for LiCoO₂. Recent advances in layered LiNi _x Co_yMn_{1 − x − y} O₂ cathode materials are summarized in this paper. The preparation and the performance are reviewed, and the future promising cathode materials are also prospected.     

Synthesis and thermolysis of substitutional solid solutions (Cu1?yMy)2(OH)PO4·xH2O (x = 0.1?0.2; M = Zn, Co, Ni)

Substitutional solid solutions (Cu_1−y Zn _y )₂(OH)PO₄·xH₂O (0 ≤ y ⩽ 0.26, x = 0.1−0.2), (Cu_1−y Co _y )₂(OH)PO₄·xH₂O (0 ≤ y ≤ 0.10, x = 0.1−0.2), and (Cu_1−y Ni _y )₂(OH)PO₄·xH₂O (0 ≤ y ≤ 0.08, x = 0.1−0.2) were synthesized. The unit cell parameters of the resulting phosphates were determined, and their IR absorption spectra were measured. The reactants were H3PO4 and mixtures of hydrous carbonates of the appropriate metals. Thermolysis of the solid solutions was examined with (Cu_1−y Co _y )₂(OH)PO₄·xH₂O (0 ≤ y ≤ 0.10, x = 0.1−0.2) as an example.     

Glycine-assisted hydrothermal synthesis of nanostructured Co x Ni1−x –Al layered triple hydroxides as electrode materials for high-performance supercapacitors

Nanostructured Co _x Ni_1−x –Al layered triple hydroxides (Co _x Ni_1−x –Al LTHs) have been successfully synthesized by a facile hydrothermal method using glycine as chelating agent. The samples were characterized by X-ray diffraction, thermogravimetry, Fourier transform infrared spectroscopy and scanning electron microscopy. The morphologies of Co _x Ni_1−x –Al LTHs varied with the Co content and its effect on the electrochemical behavior was studied by cyclic voltammetry and galvanostatic charge–discharge techniques. Electrochemical data demonstrated that the Co _x Ni_1−x –Al LTHs with Co/Ni molar ratio of 3:2 owned the best performance and delivered a maximum specific capacitance of 1,375 F g⁻¹ at a current density of 0.5 A g⁻¹ and a good high-rate capability. The capacitance retained 93.3% of the initial value after 1,000 continuous charge–discharge cycles at a current density of 2 A g⁻¹.     

Low-temperature heat capacities and thermodynamic properties of 2,2-dimethyl-1,3-propanediol

The molar heat capacities C _p,m of 2,2-dimethyl-1,3-propanediol were measured in the temperature range from 78 to 410 K by means of a small sample automated adiabatic calorimeter. A solid-solid and a solid-liquid phase transitions were found at T-314.304 and 402.402 K, respectively, from the experimental C _p-T curve. The molar enthalpies and entropies of these transitions were determined to be 14.78 kJ mol⁻¹, 47.01 J K⁻¹ mol⁻ for the solid-solid transition and 7.518 kJ mol⁻¹, 18.68 J K⁻¹ mol⁻¹ for the solid-liquid transition, respectively. The dependence of heat capacity on the temperature was fitted to the following polynomial equations with least square method. In the temperature range of 80 to 310 K, C _p,m/(J K⁻¹ mol⁻¹)=117.72+58.8022x+3.0964x ²+6.87363x ³−13.922x ⁴+9.8889x ⁵+16.195x ⁶; x=[(T/K)−195]/115. In the temperature range of 325 to 395 K, C _p,m/(J K⁻¹ mol⁻¹)=290.74+22.767x−0.6247x ²−0.8716x ³−4.0159x ⁴−0.2878x ⁵+1.7244x ⁶; x=[(T/K)−360]/35. The thermodynamic functions H _T−H _298.15 and S _T−S _298.15, were derived from the heat capacity data in the temperature range of 80 to 410 K with an interval of 5 K. The thermostability of the compound was further tested by DSC and TG measurements. The results were in agreement with those obtained by adiabatic calorimetry.     

Etude des systemes CaHPO4−MHPO4−H2O (M=Sr,Ba) A 50°C

The systems CaHPO₄−MHPO₄−H₂O (M=Sr, Ba) were studied at 50°C. ForM=Sr, the series of single phases, Ca_1−xSr_xHPO₄ for 0.95<X<0.75 and Ca_xSr_1−xHPO₄ for 0.4<X<1 have been prepared. These solid solution were caracterized by their infrared spectra and their crystallographic unit cell parameters. ForM=Ba a new phase Ca₂Ba(HPO₄)₃ has been determined. It was characterized by DRX, IR, ATD and chemical analyses.

---

Zusammenfassung Bei 50°C wurde das System CaHPO₄−MHPO₄−H₂O (mitM=Sr, Ba) untersucht. FürM=Sr wurden Serien von Einzelphasen erhalten: Ca_1−xSr_xHPO₄ für 0.95<X< 0.75 und Ca_xSr_1−xHPO₄ für 0.4<X<1. Diese Mischkristalle wurden anhand ihrer Infrarotspektren und ihrer kristallographischen Elementarzellenparameter charakterisiert. FürM=Ba wurde die neue Phase Ca₂Ba(HPO₄)₃ ermittelt. Sie wurde mittels DRX, IR, ATD und chemischer Analyse charakterisiert.

     

CuO/Ce<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Sn<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> catalysts: synthesis,characterization, and catalytic performance for low-temperature CO oxidation

Ce _x Sn_1−x O₂ metal oxides were prepared by a citrate method and used as supports for CuO/Ce _x Sn_1−x O₂ catalysts. The as-prepared samples were characterized by X-ray diffraction (XRD), transmission electron microscopy, high-resolution TEM, and temperature-programmed reduction techniques. XRD analysis indicated that the Ce _x Sn_1−x O₂ samples maintain the fluorite structure and form a solid solution when x = 0.9 or 0.8. TPR analysis revealed that two kinds of copper species are present on the surface of the Ce _x Sn_1−x O₂ support. The catalytic properties of the CuO/Ce _x Sn_1−x O₂ catalysts were evaluated for low-temperature CO oxidation using a microreactor-GC system. The effects of Ce/Sn ratio and CuO loading on the catalytic performance were investigated. The results showed that these CuO/Ce _x Sn_1−x O₂ catalysts are very active for low-temperature CO oxidation. The 650 °C calcined 7 wt%-CuO/Ce _x Sn_1−x O₂ catalyst exhibited the highest catalytic activity.     

Development of Cocatalysts for Photocatalytic Overall Water Splitting on (Ga1? x Zn x )(N1? x O x ) Solid Solution

The development of cocatalysts promoting overall water splitting on (Ga_1−x Zn _x )(N_1−x O _x ) solid solution photocatalyst is presented. The (Ga_1−x Zn _x )(N_1−x O _x ) is a stable visible-light-driven photocatalyst for stoichiometric water splitting upon loading with a suitable nanoparticulate cocatalyst. Loading with a combination of Cr and Rh oxides, Rh_2−y Cr _y O₃, is demonstrated to raise the quantum efficiency of (Ga_1−x Zn _x )(N_1−x O _x ) for overall water splitting to 2.5% at 420–440 nm. This represents a 10-fold increase in efficiency over the highest efficiency previously obtained using nanoparticulate RuO₂ as a cocatalyst. In addition to the composition, the dispersion and size of cocatalyst nanoparticles are identified as important factors affecting the degree of enhancement for stoichiometric water splitting. Kazuhiko Maeda—Research Fellow of the Japan Society for the Promotion of Science (JSPS).     

Ionic conduction of lithium for Perovskite-type compounds, Li x La(1− x )/3NbO3 and (Li0.25La0.25)1− x Sr0.5 x NbO3

Perovskite-type compounds, Li _x La_{(1− x )/3}NbO₃ and (Li_0.25La_0.25)_{1− x} Sr_{0.5 x} NbO₃ as lithium ionic conductors, were synthesized by a solid-state reaction. From powder X-ray diffraction, the solid solution ranges of the two compounds were determined to be 0≤x≤0.25 and 0≤x≤0.125, respectively. In the Li _x La_{(1− x )/3}NbO₃ system, the ionic conductivity of lithium at room temperature, σ₂₅, exhibited a maximum value of 4.7 × 10⁻⁵ S · cm⁻¹ at x = 0.10. However, because of the decrease in the lattice parameters with increasing Li concentration x˙, σ₂₅ of the samples decreased with increasing x from 0.10 to 0.25. Also, in the (Li_0.25La_0.25)_{1− x} Sr_{0.5 x} NbO₃ system, the lattice parameter increased with the increase of Sr concentration and the σ₂₅ achieved a maximum (7.3 × 10⁻⁵ S · cm⁻¹ at 25 °C) at x = 0.125. Received: 12 September 1997 / Accepted: 15 November 1997