A study of solid-state rhodium(III) sulfates

Solid-state rhodium(III) sulfates and their aqueous solutions were examined by IR and electronic absorption spectroscopy, thermogravimetry, X-ray powder diffraction analysis, and ¹⁰³Rh and ¹⁷O NMR spectroscopy. A study of the spontaneous aquation of freshly prepared solutions showed that this process results in an equilibrium between the subsystems of monomeric and oligomeric complexes. It was found that solid-state rhodium(III) sulfates vary in phase composition, basically consisting of dimeric and trimeric complexes.     

Extraction of rhodium(III) by 1,3-diamyl-2-imidazolidinethione from hydrochloric acid solutions

The extraction of rhodium(III) with 1,3-diamyl-2-imidazolidinethione from hydrochloric acid solutions was studied. Optimum conditions for rhodium(III) extraction were determined. It was found that rhodium(III) was extracted from a 0.5 M solution of HCl at a phase contact time of 3 h by a coordination mechanism. The composition of the extracted compound was determined using electronic, ¹H and ¹³C NMR, and IR spectroscopy and elemental analysis. It was demonstrated that the extracting agent coordinated to the rhodium(III) ion through the sulfur atom.     

Extraction of rhodium(III) by a bisacylated diethylenetriamine derivative from hydrochloric acid solutions

The extraction of rhodium(III) with a bisacylated diethylenetriamine derivative from hydrochloric acid solutions was studied. Optimum conditions for rhodium(III) extraction were determined. It was found that, at a contact time to 10 min, the extraction occurred by an ion-association mechanism. At a contact time longer than 10 min, rhodium(III) was extracted by a mixed mechanism with the insertion of an extractant molecule into the inner coordination sphere of the rhodium(III) ion. The composition of the extracted compound was determined using electronic, ¹H and ¹³C NMR, and IR spectroscopy and elemental analysis, and the structure of this compound was proposed.     

Liquid-liquid extraction of rhodium(III) from hydrochloric acid solutions with 1,2,4-triazole derivative

Liquid-liquid extraction of rhodium(III) from hydrochloric acid solutions with a 1,2,4-triazole derivative was studied. Optimal conditions for its recovery were found. Rhodium(III) was shown to be recovered in extraction system by ion-exchange reaction at the time of phase contact not longer than 5 min. When phase contact time increased, rhodium(III) is extracted by a mixed mechanism with simultaneous insertion of two extractant molecules into the inner coordination sphere of rhodium(III) ion. Composition of coordination species of recovered compounds was established by electronic, IR, ¹H and ¹³C NMR spectroscopy and functional analysis, the structure of the coordination species is proposed.     

Extraction of rhodium(III) with sulfoxides from hydrochloric acid solutions

Extraction of rhodium(III) from hydrochloric acid solutions with dihexyl sulfoxide (DHSO) and with petroleum sulfoxides (PSOs) was studied, and the optimal conditions for its recovery were found. At a phase contact time of up to 0.5 h, the extraction of rhodium(III) with sulfoxides occurred mainly by an ionassociation scenario. If the phase contact time exceeds 0.5 h, a mixed extraction scenario predominated to form the extracted complexes (L · H⁺) · [RhCl₄L₂]-(DHSO)_o and PSO (LH⁺) · [RhCl₄(H₂O) · L]⁻. The protonation of the extraction agents occurred at the donor oxygen atoms of the sulfoxide group. When rhodium was extracted with PSOs, the coordination of the extractant molecule in the inner coordination sphere of the acido complex to the metal ion occurred through the donor sulfur atom of the sulfoxide group, while with the use of DHSO, through the donor atoms of sulfur and oxygen of the sulfoxide group. Electronic, ¹H NMR, and IR spectroscopy and elemental analysis were used to determine the composition of the extracted compounds and suggest their structure.     

Novel half‐sandwich η5‐Cp *–rhodium(III) and η5‐Cp *–ruthenium(II) complexes bearing bis(phosphino)amine ligands and their use in the transfer hydrogenation of aromatic ketones

Two new half‐sandwich η⁵‐Cp*–rhodium(III) and η⁵‐Cp*–ruthenium(II) complexes have been prepared from corresponding bis(phosphino)amine ligands, thiophene‐2‐(N,N‐bis(diphenylphosphino)methylamine) or furfuryl‐2‐(N,N‐bis(diphenylphosphino)amine). Structures of the new complexes have been elucidated by multinuclear one‐ and two‐dimensional NMR spectroscopy, elemental analysis and IR spectroscopy. These Cp*–rhodium(III) and Cp*‐ruthenium(II) complexes bearing bis(phosphino)amine ligands were successfully applied to transfer hydrogenation of various ketones by 2‐propanol. Copyright © 2013 John Wiley & Sons, Ltd.     

Monohydride-Dichloro Rhodium(III) Complexes with Chiral Diphosphine Ligands as Catalysts for Asymmetric Hydrogenation of Olefinic Substrates

We report full details of the synthesis and characterization of monohydride-dichloro rhodium(III) complexes bearing chiral diphosphine ligands, such as (S)-BINAP, (S)-DM-SEGPHOS, and (S)-DTBM-SEGPHOS, producing cationic triply chloride bridged dinuclear rhodium(III) complexes ( 1 a : (S)-BINAP; 1 b : (S)-DM-SEGPHOS) and a neutral mononuclear monohydride-dichloro rhodium(III) complex ( 1 c : (S)-DTBM-SEGPHOS) in high yield and high purity. Their solid state structure and solution behavior were determined by crystallographic studies as well as full spectral data, including DOSY NMR spectroscopy. Among these three complexes, 1 c has a rigid pocket surrounded by two chloride atoms bound to the rhodium atom together with one tBu group of (S)-DTBM-SEGPHOS for fitting to simple olefins without any coordinating functional groups. Complex 1 c exhibited superior catalytic activity and enantioselectivity for asymmetric hydrogenation of exo-olefins and olefinic substrates. The catalytic activity of 1 c was compared with that of well-demonstrated dihydride species derived in situ from rhodium(I) precursors such as [Rh(cod)Cl]₂ and [Rh(cod)₂]⁺[BF₄]⁻ upon mixing with (S)-DTBM-SEGPHOS under dihydrogen.     

The first (<Superscript>31</Superscript>P, <Superscript>17</Superscript>O,and <Superscript>103</Superscript>Rh) NMR observation complex formation of rhodium(III) with phosphoric acid

³¹P, ¹⁷O, and ¹⁰³Rh NMR spectroscopy shows that rhodium(III) reacts with phosphoric acid to generate polynuclear aquaphosphate complexes in which phosphate ions mostly have a bridging function. Assignment of ¹⁰³Rh NMR signals in dominant rhodium complexes is suggested.     

Synthesis and properties of an energetic complex pentaamminecobalt (III) perchlorate,with 4-amino-1,2,4-triazole as ligand

Energetic metal complex, 4-amino-1,2,4-triazole-N¹(N²) pentaamminecobalt(III) perchlorate, was produced by the anation reaction of aqua pentaamminecobalt(III) perchlorate with 4-amino-1,2,4-triazole. The thermal decomposition of the metal complex and its mixtures with 1,1-diamino-2,2-dinitroethylene (FOX-7) was studied.     

Rhodium-carbonyl complexes with a quinolyl functionalized Cp-ligand: synthesis and photochemical activation

Dicarbonyl[η⁵-2,3,4,5-tetramethyl-1-(8-quinolyl)cyclopentadienyl]rhodium(I) (1) was prepared by the reaction of [Rh(CO)₂Cl]₂ with 2,3,4,5-tetramethyl-1-(8-quinolyl)cyclopentadienyl-potassium. Irradiation of 1 in chloroform or dichloromethane as solvent leads to the formation of dichloro[η⁵-2,3,4,5-tetramethyl-1-(8-quinolyl)cyclopentadienyl]rhodium(III) (2). When Rh₆(CO)₁₆ is present, the cluster adds to the 8-quinolyl-cp-rhodium fragment and the compound [η⁵-2,3,4,5-tetramethyl-1-(8-quinolyl)cyclopentadienyl]rhodium-di-μ-carbonyl-hexarhodiumtetradecacarbonyl (3) is formed in 65% yield. The coordination sphere of the rhodium(III) atom in compound 2 and of the rhodium(I) atom in 3 is completed by a coordination of the quinolyl moiety. This was revealed by NMR spectroscopy as well as by X-ray analyses.     

Preparation,characterization, and hydrogenation activity of new Rh0–MCM-41 catalysts prepared from as-synthesized MCM-41 and RhCl3

Impregnation of as-synthesized MCM-41 silica by ethanolic solutions of rhodium(III) chloride was tested as an alternative to its introduction into the synthesis gel to get, after calcination and reduction by H₂, highly dispersed metal(0) nanoparticles throughout the mesopores network. Rh(III) and Rh(0)–based solids thus obtained were analyzed by infrared spectroscopy, elemental analysis, transmission electron microscopy, N₂ sorption, and X-ray diffraction. Materials with 1.6 wt % of rhodium could be obtained as a result of CTA⁺/Rh³⁺ exchange. The determining role of CTA⁺ was emphasized through blank experiments. In a second series of materials, ethanol was also exploited for its ability to reduce Rh(III). All Rh(0)-based solids were tested as catalysts in the hydrogenation of styrene under mild temperature and pressure conditions. Catalysis performances of the most efficient sample (reduced by H₂) were further compared with those of a very similar material prepared by the introduction of Rh(III) directly into the synthesis gel of MCM-41 silica. Better cis selectivities in the hydrogenation of disubstituted arene derivatives were achieved with materials issued from the new preparation method.     

The study of induced aquation of Rh(III) sulfate complexes

The processes of aquation of Rh(III) complexes in the presence of BaCl₂ and Ba(ClO₄)₂ were studied by the ¹⁰³RH and ¹⁷O NMR methods. In the first case, the final products were found to be the monomeric aqua chloride complexes, while in the second case, aqua hydroxo complexes were formed. The chloride ions present in the system significantly increase the process rate.     

Rhodium(III), palladium(II), and platinum(II) complexes with 2-(2-hydroxybenzoyl)-N-methylhydrazinecarbothioamide: Syntheses,structures, and spectral characteristics

The syntheses and spectral (IR, UV-VIS, XPS, and ¹H and ¹³C NMR) characteristics of the rhodium(III), palladium(II), and platinum(II) complexes with 2-(2-hydroxybenzoyl)-N-methylhydrazinecarbothioamide (HBMHCTA) are described. The coordination of HBMHCTA to the central metal ion and its intraligand rearrangement in the complex formation of rhodium(III) ions are studied. The structure of the mixed-ligand complex [Pd(H₂L)PPh₃] is determined by X-ray diffraction analysis.     

Extraction of rhodium(III) with petroleum sulfoxides from hydrochloric acid solutions

Extraction of rhodium(III) from hydrochloric acid solutions with petroleum sulfoxides was studied. The optimal conditions of its recovery were found. The composition and structure of the compound being extracted was determined by electronic absorption, ¹H NMR, and IR spectroscopies and elemental analysis.     

Preliminary structural characterization, anti-inflammatory and anticoagulant activities of chondroitin sulfates from marine fish cartilage

Chondroitin sulfates isolated from cartilage of five marine fish species: Atlantic salmon (Salmo salar), Greenland shark (Somniosus microcephalus), blackmouth catshark (Galeus melastomus), birdbeak dogfish (Deania calcea), and Arctic skate (Amblyraja hyperborea), were characterized in detail by ¹H and ¹³C NMR spectroscopy. The complete signal assignments for carbohydrates were made and the relative contents of the key structural units were estimated by 2D homonuclear and heteronuclear NMR spectroscopy (COSY, TOCSY, NOESY, HSQC, and HMBC). The average length of the polysaccharide chain was evaluated from the integrated intensity ratio of the terminal and internal monosaccharide residues. The anti-inflammatory and anticoagulant activities of the specimens were studied. Chondroitin sulfates from salmon and Arctic skate exhibit considerable anti-inflammatory activity. All specimens manifest weak anticoagulant activity. The results of the present study indicate that chondroitin sulfates deserve more detailed investigation as potential anti-inflammatory agents.     

Hydrogenation of CO2 to formic acid in the presence of the Wilkinson complex

Formic acid was synthesized in a high yield at room temperature in the presence of the Wilkinson complex and an excess of PPh₃. The catalytic properties of the rhodium complex depend strongly on the reaction conditions. The mechanism of the rhodium catalyst deactivation was studied by the kinetic method and ³¹P NMR spectroscopy. The methods for the stabilization of the rhodium catalyst were found.     

Reaction of rhodium trichloride and dirhodium(II) acetate with <Emphasis Type="Italic">trans</Emphasis>-4,4′-bis(diethoxyphosphoryl)biphenyl-18-crown-6

The complexation of RhCl₃·3H₂O and [RH₂(CH₃COO)₄·2H₂O] with trans-4,4′-bis (diethoxyphosphoryl)biphenyl-18-crown-6 in various media was studied. In the synthesized compounds the rhodium(III) or dirodium(II) ions form supramolecular ensembles with ligand environment. The compounds were characterized by NMR, IR, Raman, ESR, X-ray electron spectroscopy, conductivity, and the data of elemental and X-ray fluorescence analyses. The predominant role of diethoxyphosphoryl groups at the macrocycle in binding rhodium(III) and dirhodium(II) ions was demonstrated.     

Four-component relativistic calculations of NMR shielding constants of the transition metal complexes. Part 1: Pentaammines of cobalt,rhodium, and iridium

The nonrelativistic and four-component fully relativistic calculations of ¹H, ¹⁵N, ⁵⁹Co, ¹⁰³Rh, and ¹⁹³Ir shielding constants of pentaammineaquacomplexes of cobalt(III), rhodium(III), and iridium(III) were carried out at the density functional theory (DFT) level of theory. The noticeable deshielding relativistic corrections were observed for nitrogen shielding constants (chemical shifts), whereas those corrections were found to be negligible for protons. For the transition metals cobalt, rhodium, and iridium, relativistic corrections to their nuclear magnetic resonance (NMR) shielding constants were found to be rather small for cobalt and rhodium (some 5–10%), whereas they are essentially larger for iridium (up to 70%).     

Synthesis and photochemical degradation of copper(II) <Emphasis Type="Italic">ortho</Emphasis>-azidobenzoate

An aqua complex of copper(II) ortho-azidobenzoate was synthesized. The formula of this complex, [Cu(OH)ABA 2H₂O]₂ (ABA is ortho-azidobenzoate), was determined by IR, UV, and EPR spectroscopy and volumetric analysis (from the amount of nitrogen released upon dissolving the aqua complex in dry DMF). It was found that, in this aqua complex, the azido group is not coordinated to the copper(II) ion. On the dissolution of the aqua complex in dry organic solvents, such as DMF, DMSO, dioxane, and methanol, it underwent dehydration followed by the coordination of the azido group to copper(II) to convert into a chelate complex. The chelate complex in the solid state was stable at room temperature; however, it slowly degraded in solutions to liberate nitrogen. Dissolution in dry THF did not result in the dehydration of the complex. In the photolysis of the aqua complex in dry THF or a THF-water mixture, photochemical dehydration yielding the chelate complex occurred along with the degradation of the azido group and the formation of copper(II) anthranilate.Translated from Khimiya Vysokikh Energii, Vol. 39, No. 2, 2005, pp. 135–139.Original Russian Text Copyright © 2005 by Budruev, Levina, Karyakina, Oleinik.This revised version was published online in April 2005 with a corrected cover date.     

Flame atomic absorption spectrometry for the determination of trace amount of rhodium after separation and preconcentration onto modified multiwalled carbon nanotubes as a new solid sorbent

The present article reports on the application of modified multiwalled carbon nanotubes (MMWCNTs) as a new, easily prepared and stable solid sorbent for the preconcentration of trace rhodium ion in aqueous solution. Rhodium ions were complexed with 1-(2-pyridylazo)-2-naphthol (PAN) in the pH range of 3.2-4.7 and then the formed Rh-PAN complex was adsorbed on the oxidized MWCNTs. The adsorbed complex was eluted from MWCNTs sorbent with 5.0 mL of N,N-dimethylformamide (DMF). The rhodium in eluted solution was determined by flame atomic absorption spectrometry (FAAS). Linear range for the determination of rhodium was maintained between 0.16 ng mL⁻¹ and 25.0 μg mL⁻¹ in initial solution. Relative standard deviation for the 10 replicated determination of 4.0 μg mL⁻¹ of rhodium was ±0.97%. Detection limit was 0.010 ng mL⁻¹ in initial solution (3S_bl, n = 10) and preconcentration factor was 120. Sensitivity for 1% absorbance of rhodium (III) was 0.112 μg mL⁻¹. The sorption capacity of oxidized MWCNTs for Rh (III) was 6.6 mg g⁻¹. The effects of the experimental parameters, including the sample pH, flow rates of sample and eluent solution, eluent type, breakthrough volume and interference ions were studied for the preconcentration of Rh³⁺. The proposed method was successfully applied to the extraction and determination of rhodium in different samples.