Comparison of variously pretreated ion-exchange resins for131I separation from aqueous solutions

Preliminary results of experimental testing and comparison of¹³¹I separation efficiency from model solutions on ion-exchange resins pretreated in some special ways are presented. Strongly basic and strongly acidic resins were pretreated chemically and used for the separation of radioiodine by means of isotopic-exchange, ion-exchange or chemisorption and their combinations. The sorbents were tested for pI, pH, their stability during storage and selectivity of separation. From the point of view of the efficiency and selectivity of separation the sorbents based on strongly basic resins and with assumed isotopic-exchange mechanism of radioiodine separation appear to be relatively more advantegeous.     

Synthesis of a fluorescent 14-crown-4 derivative bearing a proton-dissociable moiety and its use for selective lithium-ion extraction

The fluorescent 14-crown-4 derivative possesses a p-(1,8-naphthalenedicarboxi-mido) phenol moiety as the proton -dissociable fluorophore; its synthesis is described. Highly selective extraction of lithium is achieved with the crown ether, based on a proton/metal ion-exchange mechanism. Extraction is accompanied by significant changes in the absorption and fluorescence spectra of the organic phase. Extraction equilibrium constants for the lithium and sodium ions are evaluated, the Li⁺/Na⁺ selectivity ratio being 200; other alkali metal ions were not extracted. The Li⁺ extraction quenched the fluorescence intensity of the crown ether, in correlation with the initial cation concentration in the aqueous phase.     

The effect of the synthesis method on the parameters of pore structure and selectivity of ferrocyanide sorbents based on natural minerals

Ferrocyanide sorbents were obtained via thin-layer and surface modification of natural clinoptilolite and marl. The effect of modification method on surface characteristics of these sorbents and their selectivity for cesium was studied. It was shown that the modification resulted in an increase of selectivity of modified ferrocyanide sorbents to cesium as compared with the natural clinoptilolite in presence of Na⁺, as well as in an increase of cesium distribution coefficients in presence of K⁺. The nickel–potassium ferrocyanide based on the clinoptilolite showed the highest selectivity for cesium at sodium concentrations of 10^?4—2 mol L^?1: cesium distribution coefficient was lg K _d = 4.5 ± 0.4 L kg^?1 and cesium/sodium separation factor was α(Cs/Na) = 250. In the presence of NH₄ ⁺, all modified sorbents showed approximately equal selectivity for ¹³⁷Cs. Probable applications of the sorbents were suggested.     

Uranium sorption on amorphous titanium and zirconium phosphates modified by Al3+ or Fe3+ ions

The sorption of uranium from aqueous solutions on titanium and zirconium phosphates in H⁺ and K⁺ forms modified by iron or aluminum ions has been investigated. The modified pattern of porosity is much better, than for none modified analogous, owing to their increased sorption capacity and kinetics of uranium absorption. The modified sorbents display selectivity towards uranium, that allows to purify solutions up to the content of uranium below the limit of its analytical definition.     

Solid membrane sensor for potassium ions

Titanium ferricyanide gel is found to possess good ion-exchange capacity, mechanical and chemical stability, and selectivity. An Araldite-based membrane of this compound can be used to estimate K⁺ ions in the concentration range 10^–1–10^–4 M. The sensor has a very short response time and remains stable for 2 to 3 months. There is no serious interference by bivalent and multivalent ions. Among the monovalent cations only Na⁺ and NH ₄ ⁺ may cause significant interference.     

Use of Microspherical Sulfonated Hypercrosslinked Polystyrene in Ion Chromatography

The possibility of applying sulfonated cation exchangers on the basis of hypercrosslinked polystyrene (HCPS) of different ion-exchange capacity for the ion-chromatographic separation of alkali metal and ammonium cations was demonstrated. The effect of the nature and concentration of the eluent, the temperature of the chromatographic column, additions of an organic solvent to the eluent, and the ion-exchange capacity of the sorbent on the retention of cations was examined. An unusual selectivity of the sorbent for lithium and ammonium cations was found; the elution order can change for the Li⁺/Na⁺ and Rb⁺/NH⁺ ₄ pairs depending on the nature of the eluent, the temperature, additions of an organic solvent, and the structural characteristics of the sorbent. When dilute solutions of nitric acid are used as the eluent, the following elution order of cations was obtained: Na⁺ < Li⁺ < K⁺ < NH⁺ ₄ < Rb⁺ < Cs⁺ Mg²⁺ < Sr²⁺ < Ca²⁺ < Ba²⁺. Under the optimum conditions of separation (1 mM solution of sulfuric acid, 20°C) on sulfonated HCPS with an ion-exchange capacity of 0.07 mequiv/g, the separation of ammonium and alkali metal cations was achieved within 17 min.     

Preparation of Sorbents Containing Straetlingite Phase from Zeolitic By-Product and Their Performance for Ammonium Ion Removal

In this study, straetlingite-based sorbents were used for NH₄⁺ ion removal from a synthetic aqueous solution and from the wastewater of an open recirculation African catfish farming system. This study was performed using column experiments with four different filtration rates (2, 5, 10, and 15 mL/min). It was determined that breakthrough points and sorption capacity could be affected by several parameters such as flow rate and mineral composition of sorption materials. In the synthetic aqueous solution, NH₄⁺ removal reached the highest sorption capacity, i.e., 0.341 mg/g with the S30 sorbent at a filtration rate of 10 mL/min and an initial concentration of 10 mg/L of NH₄⁺ ions. It is important to emphasize that, in this case, the Ce/C0 ratio of 0.9 was not reached after 420 min of sorption. It was also determined that the NH₄⁺ sorption capacity was influenced by phosphorus. In the wastewater, the NH₄⁺ sorption capacity was almost seven times lower than that in the synthetic aqueous solution. However, it should be highlighted that the P sorption capacity reached 0.512 mg/g. According to these results, it can be concluded that straetlingite-based sorbents can be used for NH₄⁺ ion removal from a synthetic aqueous solution, as well as for both NH₄⁺ and P removal from industrial wastewater. In the wastewater, a significantly higher sorption capacity of the investigated sorbents was detected for P than for NH₄⁺.     

Determination and preconcentration of natural and radio-cesium from aqueous solution

This work reports a modified atomic emission spectrometric (AES) method to determine cesium(I), based on the measurement of emission intensity at 455.5 nm with a limit of quantitation (LOQ) of 5.5 mg/l and a linear range up to 100 mg/l. In order to increase the sensitivity and lower the detection limits, potential sorbents were investigated for preconcentrating Cs from natural waters. Among the various ion-exchange materials synthesized, potassium hexanitrocobaltate (PHNCo) yielded the highest capacity for ¹³⁷Cs tagged Cs⁺ solutions as measured by gamma-spectrometry with a HPGe detector, showing the potential of a cesium preconcentration sorbent. As an alternative to AES determination, the PHNCo sorbent may be used for Cs⁺ collection from radiocesium tagged solutions and the retained activity in the dry solid exchanger be determined by gamma-spectrometry. This revised version was published online in August 2006 with corrections to the Cover Date.     

Selective removal of heavy metal ions using sol-gel immobilized and SPE-coated thiacrown ethers

Sorbent materials based on three thiacrown ethers, 1,4,7,10-tetrathiacyclododecane (12S4), 1,4,7,10,13-pentathiacyclopentadecane (15S5) and 1,4,7,10.13,16-hexathiacyclooctadecane (18S6) were prepared either by immobilizing the ligands into sol-gel (SG) matrix or coating on commercial solid phase extraction (SPE) column. SG sorbents were characterized by FT-IR, energy dispersive X-ray microanalysis (EDX) and thermogravimetric analysis/derivative thermogravimetric analysis (TGA/DTG). A marked thermal stability of the ligands when immobilized in sol-gel matrix was noted. The competitive sorption characteristics of a mixture of eleven metal ions (Mg²⁺, Zn²⁺, Cd²⁺, Co²⁺, Mn²⁺, Ca²⁺, Cu²⁺, Ni²⁺, Ag⁺, V⁴⁺, Hg²⁺) using: (i) batch method with ligands trapped in SG matrices, and (ii) off-line SPE column containing coated ligands were studied using ICP-MS. The extraction of metals were optimized for key parameters such as pH, contact time/flow rate, particle size (for SG sorbents) and ligand concentration. Under the optimized conditions, all the immobilized thiacrown ethers exhibited highest selectivity toward Ag⁺, with lesser responses to Hg²⁺ while the extraction of other metal ions were negligible. Among the SG sorbents, 18S6-SG offer the highest capacity and the best selectivity over Hg²⁺. However, for practical applications such as for selective isolation and preconcentration of Ag⁺, the SPE type especially based on 18S6 is preferred as analysis time and recoveries are favorable. The sorbents can be repeatedly used three times as there was no significant deterioration in the metal uptake (%E > 90%) or interference from other metal ions. The optimized procedures were successfully applied for the separation and preconcentration of traces Ag⁺ in different water samples.     

Lewis acid metal ion-exchanged MAPO-36 molecular sieve: Characterisation and catalytic activity

Magnesium aluminophosphate-36 (MAPO-36) molecular sieve was synthesised hydrothermally and subjected to wet ion-exchange with Fe³⁺, Zn²⁺, La³⁺ or Ce³⁺. They were characterised by using XRD, SEM, temperature programmed desorption (TPD) of ammonia and thermogravimetric analysis (TGA). The XRD patterns of ion-exchanged MAPO-36 exhibit similar features to that of MAPO-36, which revealed no structural degradation during ion-exchange. TPD (ammonia) showed selective ion-exchange of strong acid sites for Fe³⁺, La³⁺ and Ce³⁺ but not for Zn²⁺. Based on the results of TGA the actual species involved in the ion-exchange is suggested to be M(OH)₂⁺, which upon calcination converted to MO⁺ where M is Fe³⁺, La³⁺ or Ce³⁺. tert-Butylation of phenol was carried out in the vapour phase as a probe reaction to examine the catalytic activity of MAPO-36 and ion-exchanged MAPO-36 molecular sieves. The ion-exchanged catalysts were found to be more active than the parent MAPO-36 and also showed higher selectivity to 4-tert-butylphenol.     

Synthesis of LiAlTiO4 and its selectivity to Li+ exchange

The ion-exchanger LiAlTiO₄ of spinel type was prepared by the common precipitation/hydrothermal crystallization method, and was acid-modified. Its ion-exchange properties for alkali ions such as saturation capacity of exchange, distribution coefficient and pH titration curve were determined. LiAlTiO₄ was characterized by the X-ray diffraction method. The acid treatment of LiAlTiO₄ caused Li⁺ extraction ratio to change from 28% to 72%, while the dissolution of Al is less than 6.8%. This inorganic ion-exchanger (LiAlTiO₄-700) has a higher saturation capacity of exchange for Li than for other alkali ions, the saturation capacity of exchange for Li⁺ reaches 4.29 mmol/g (30.03 mg/g); LiAlTiO₄-700(H) has a higher selectivity of ion exchange for Li⁺ than for other alkali ions. These results show LiAlTiO₄-700(H) has better memory and selectivity of ion exchange, and higher capacity of ion exchange for Li⁺. It is a kind of prospective ionic sieve for Li⁺. __________ Translated from Chinese Journal of Applied Chemistry, 2005, 22 (7) (in Chinese)     

Thermodynamics of ion exchange of H<Superscript>+</Superscript> by Na<Superscript>+</Superscript> or NH<Subscript>4</Subscript><Superscript>+</Superscript> on ion-exchange resins based on <Emphasis Type="Italic">C</Emphasis>-tetramethylcalix[4]resorcinarene

The corrected selectivity coefficients of the ion exchange H⁺-Na⁺ and H⁺-NH₄ ⁺ on ion-exchange resins based on C-tetramethylcalix[4]resorcinarene were calculated from the experimental data obtained from studying ion-exchange equilibria. The preference of the ion-exchange resins for cations increases in the sequence: Na⁺ < NH₄ ⁺ < < H⁺, and the ion-exchange resin based on (2-furyl)hydroxymethyltetramethylcalix[4]resorcinarene has a higher preference for ammonium cations. According to the results of microcalorimetric measurements, the exchange H⁺-Na⁺ on this ion-exchange resin is accompanied by the highest change in the differential enthalpy. It follows from the quantum-chemical calculations that the introduction of a (2-furyl)hydroxymethyl group into the structure of the polymer induces additional electrostatic interactions between an ammonium cation and an elementary unit of the ion-exchange resin.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2560–2563, December, 2004.     

Ion-exchange selectivity of a sulfonic cation exchanger based on immobilized cis-tetraphenylcalix[4]resorcinolarene

The ion-exchange equilibrium of protons in SO₃H groups of a sulfonic cation exchanger based on immobilized cis-tetraphenylcalix[4]resorcinolarene with cations of Li⁺, Na⁺, Ag⁺, Cu²⁺, In³⁺, and protonated 1,3,5,7-tetraazaadamantane in aqueous solutions of electrolytes at 293 K was studied. The corrected coefficients of the cation exchange selectivity were calculated.     

Synthesis and physicochemical properties of chelating sorbents containing functional groups of N-aryl-3-aminopropionic acids

Two types of chelating sorbents with different types of addition of iminodipropionate groups to a polymeric matrix were synthesized: carboxyethylated aminopolystyrene (sorbent 1) based on linear polystyrene and carboxyethylaminomethylpolystyrene (sorbent 2) based on the copolymer of styrene and divinylbenzene. The ionization constants and concentrations of functional groups of the sorbents (exchange capacity for hydrogen ions) were determined. The sorbents exhibit high selectivity for copper(II) ions with the maximum of sorption from ammonia—acetate buffer solutions lying in a range of pH 5.0–7.5. The time needed for a solution of copper(II)—sorbent system with continuous stirring to reach exchange equilibrium is 3.5 and 2 h for sorbents 1 and 2, respectively. The exchange capacity for copper(II) ions is 2.54 and 0.10 mmol g⁻¹, respectively. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 800–806, May, 2006.     

LiMg0.5Mn1.5O4的合成及对Li+的离子交换选择性

锂及其化合物在航空航天、化工、医药、空调、高能电池和热核反应等方面都有广泛应用，对锂及其化合物的需求与日俱增。我国液体锂资源非常丰富，开发利用其中的锂资源具有重要意义。从盐湖水、地下卤水、盐田母液、油气田水等咸水资源中提取锂的方法有碳酸盐沉淀法、离子交换法、萃取法等。离子     

Selective ion-exchange sorption of K<Superscript>+</Superscript> from aqueous solutions containing Na<Superscript>+</Superscript>-K<Superscript>+</Superscript> mixture on Sn(IV) hydrophosphate

Ion-exchange sorption of K⁺ and Na⁺ from their mixture on X-ray-amorphous and crystalline Sn(IV) hydrophosphates was studied. These sorbents exhibit a high selectivity for K⁺. Amorphous Sn(IV) hydrophosphate can be used for efficient purification of aqueous sodium salt solutions to remove potassium impurity.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 8, 2004, pp. 1275–1278.Original Russian Text Copyright © 2004 by Smirnov, Dimova, Redchenko.     

Effect of metal ion loaded in a resin towards fluoride retention

Indion FR 10 is a commercially available ion exchange resin with sulphonic acid functionality named as H⁺ form, has appreciable defluoridation capacity (DC). It has been chemically modified to La³⁺, Fe³⁺, Ce³⁺ and Zr⁴⁺ forms by incorporating respective metal ions into the resin in order to know their fluoride selectivity by measuring the DC of the respective resin. The maximum DC of these chemically modified ion exchange resins namely La³⁺, Fe³⁺, Ce³⁺ and Zr⁴⁺ forms were found to be 469.7, 467.5, 456.3 and 470.9 mg F⁻/kg respectively suggests their higher selectivity towards fluoride than H⁺ form which has the DC of only 275 mg F⁻/kg at 11 mg/L initial fluoride concentration. The higher DC of the modified resins was explained by electrostatic adsorption and complexation whereas H⁺ form retains fluoride by hydrogen bond. The functional groups present in the sorbents were identified by FTIR and the existence of fluoride onto the resins was confirmed by EDAX analysis. The experimental data was fitted with both Freundlich and Langmuir isotherms. Thermodynamic parameters such as ΔG°, ΔH° and ΔS° indicate that the nature of sorption is spontaneous and endothermic. The applicability of reaction-based and diffusion-based kinetic models was investigated. A field trial was carried out with fluoride water collected from a nearby fluoride-endemic village to test the suitability of these sorbents at field conditions.     

合成钾型丝光沸石的酸改型及对K+的离子交换性

合成出钾型丝光沸石,对其进行了酸改型,测定了其对碱金属离子的饱和交换容量和分配系数、ｐＨ滴定曲线等离子交换性能,并对该沸石进行了Ｘ射红衍射分析和ＦＴ－ＩＲ分析。结果表明,该沸石对钾离子具有较强的交换选择性。     

Comparative characteristics of the ion-exchange properties of natural clinoptilolites from Bulgaria and the USSR for the purpose of purification of liquid wastes from nuclear power plants. Part I: Study of the equilibrium sorption of cesium and strontium ions from solutions of different composition

The ion-exchange equilibrium of cesium and strontium ions on clinoptilolites from different deposits — Dzegvi and Tedzami /Georgian SSR/, Beli Plast and Beli Bair /Bulgaria/ in different cationic forms of the sorbents /natural, sodium, calcium and ammonium/ is studied. The static ion-exchange capacities are determined. The sorption isotherms are plotted and the corresponding distribution coefficients are calculated. Mechanical characteristics which are important for the assessment of the technological use of the sorbents in dynamic conditions are determined. The clinoptilolite from Beli Plast deposit has the highest capacity in comparison with the other studied zeolites. The selectivity of the clinoptilolites from Bulgarian deposits is independent of the cationic form of the sorbent while the selectivity of the Georgian clinoptilolites strongly depends on the cationic form; the selectivity of the ammonium form of Tedzami sorbent is the highest.     

Investigation of cation environment and framework changes in silicotitanate exchange materials using solid-state Na, Si, and Cs MAS NMR

Crystalline silicotitanate (CST), HNa₃Ti₄Si₂O₁₄·4H₂O and the Nb-substituted CST (Nb-CST), HNa₂Ti₃NbSi₂O₁₄·4H₂O, are highly selective Cs⁺ sorbents, which makes them attractive materials for the selective removal of radioactive species from nuclear waste solutions. The structural basis for the improved Cs⁺ selectivity in the niobium analogs was investigated through a series of solid-state magic angle spinning (MAS) NMR experiments. Changes in the local environment of the Na⁺ and Cs⁺ cations in both CST and Nb-CST materials as a function of weight percent cesium exchange were investigated using ²³Na and ¹³³Cs MAS NMR. Framework changes induced by Cs⁺ loading and hydration state were investigated with ²⁹Si MAS NMR. Multiple Cs⁺ environments were observed in the CST and Nb-CST material. The relative population of these different Cs⁺ environments varies with the extent of Cs⁺ loading. Marked changes in the framework Si environment were noted with the initial incorporation of Cs⁺, however with increased Cs⁺ loading the impact to the Si environment becomes less pronounced. The Cs⁺ environment and Si framework structure were influenced by the Nb-substitution and were greatly affected by the amount of water present in the materials. The increased Cs⁺ selectivity of the Nb-CST materials arises from both the chemistry and geometry of the tunnels and pores.