Cobalt(II), Nickel(II), and Copper(II) Complexes with Diphenylthiocarbazide

New [ML(H₂O)₂] complexes (M = Co²⁺, Ni²⁺, or Cu²⁺; H₂L = diphenylthiocarbazide) were synthesized and studied using IR and diffuse reflection electronic spectroscopy, magnetic chemistry, conductometry, and DTA. The metals were shown to coordinate L^2–through nitrogen and sulfur atoms. The complex [CuL(H₂O)₂] is a dimer.     

Determination of Lead(II), Copper(II), Zinc(II), Cobalt(II), Cadmium(II), Iron(III), Mercury(II) using sequential injection extractions

Sequential injection analysis is still dominated by single component analysis. In this proposed robust, economical simple instrumental system seven different metal ions are determined simultaneously using thin-film sequential injection extraction (SIE) with multivariate calibration and multiwavelength detection. Dithizone, in ethanol, is used as extractant and the metal dithizonates’ spectra are generated by a diode array spectrophotometer between 300 and 700 nm. The SI thin-film extraction using water miscible with ethanol works due to the hydrophobic interaction of ethanol with the Teflon wall to create a thin film. A sample frequency of 27 samples per hour was obtained with a sample carry-over of less than 1%. The results of the proposed sequential injection extraction system compare favourably with the results obtained by using standard atomic absorption spectrometry (AAS) methods on conventional extraction samples.     

N-Formamid osalicylaldimine andN-Acetamidosalicylaldimine Complexes of Copper(II), Nickel(II) and Cobalt(II)

Summary N-formamidosalicylaldimine (H₂SF) andN-acetamidosalicylaldimine (H₂SA) complexes of Cu^II, Ni^II and Co^II have been synthesized and characterized by analytical, spectroscopic and magnetic data. The ligands coordinate to the metalvia the hydroxyl, carbonyl and imino groups to yield normal paramagnetic and insoluble complexes which decompose above 250°.     

Complexes of Cobalt(II), Nickel(II) and Copper(II) Chloroacetates with Quinoline N-Oxide

Some 1:1 and 1:2 adducts of cobalt(II), nickel(II) and copper(II) chloroacetates with quinoline N -oxide have been isolated by the interaction of the appropriate metal chloroacetate with quinoline N -oxide (QuinNo). The complexes isolated are of 1:1 stoichiometry of formula (M(CH_3-xCl_xCOO)₂QuinNO) (when M=Co(II), Ni(Il); X=l, 2 and 3 and when M=Cu(II), X=1 and 2) except copper(II) trichloroacetate which yields an adduct of 1:2 stoichiometry of formula[Cu(CCl₃COO)₂ (QuinNO)₃]. The adducts isolated are soluble in common organic solvents.     

Copper(II), Nickel(II) and Cobalt(II) Complexes of Dibasic Tridentate Schiff Bases

Complexes of Cu(II), Ni(II) and Co(II) with the Schiff bases derived from o-aminobenzoic acid with salicylaldehyde and its 5-chloro and 5-bromo derivatives have been prepared. The 1:1 (metal-ligand) stoichiometry of these complexes is shown by elemental analysis, gravimetric estimations and conductometric titrations while the structures of the complexes are proved by i.r. spectra and thermogravimetric analysis. The magnetic susceptibility and electronic spectra of Cu(II) complexes indicate the nonplanar binuclear structures while that of Ni(II) and Co(II) show their paramagnetic octahedral geometry. The molar conductance values in nitrobenzene indicate the nonelectrolytic behaviour of the complexes. The results show that the complexes of the type (Cu·L)₂, Ni·L·3H₂O and Co·L·3H₂O are formed having solvent molecule in coordination with the metal ion. The monopyridine and monoammonia adducts of Cu(II) complexes were found to be monomeric.     

Complexes of Cobalt(II), Nickel(II) and Copper(II) Chloroacetates with Quinoline N-Oxide

Some 1:1 and 1:2 adducts of cobalt(II), nickel(II) and copper(II) chloroacetates with quinoline N -oxide have been isolated by the interaction of the appropriate metal chloroacetate with quinoline N -oxide (QuinNo). The complexes isolated are of 1:1 stoichiometry of formula [M(CH₃_xClxCOO)₂QuinNO] (when M=Co(II), Ni(II); X=1,2 and 3 and when M=Cu(II), X=l and 2) except copper(II) trichloroacetate which yields an adduct of 1:2 stoichiometry of formula[Cu(CCI₃COO)₂(QuinNO)₂]. The adducts isolated are soluble in common organic solvents.     

Coordination Compounds of Cobalt(II), Nickel(II), and Zinc(II) Valerates and Benzoates with Phenylacethydrazide

Complexes of cobalt(II), nickel(II), and zinc(II) valerates and benzoates with phenylacethydrazide were synthesized. These compounds were characterized by chemical analysis, IR spectroscopy, diffuse reflection spectroscopy, and thermogravimetry.     

Coordination Compounds of Cobalt(II), Nickel(II), and Zinc(II) Malonates and Phthalates with Benzohydrazide

Benzohydrazide complexes of cobalt(II), nickel(II), and zinc(II) malonates and phthalates were synthesized and characterized by chemical analysis, IR spectroscopy, diffuse reflectance spectroscopy, and thermogravimetry.     

Zinc(II), Cobalt(II) and Nickel(II) Complexes of 5-Substituted-1,3,4-Thiadiazoles

Zn(II), Co(II) and Ni(II) complexes with some 5-substituted-1,3,4-thiadiazoles (L₁-L₄) have been prepared and characterized by conductivity, microanalysis, thermal analysis, infrared and electronic spectra measurements. All complexes behave as 1:1 electrolyte and the ligands are coordinated as bidentate molecules. The stability constants and energy of formation are determined and discussed on the basis of the ligands structure.     

Mercury(II) Sorption on Nickel(II) Hydroxide: Influence of Halide Ion Concentration and pH of the Solutions

Sorption of Hg(II) on -Ni(OH)₂ was studied as influenced by chloride ion concentration and pH of the solutions, affecting the Hg(II) speciation. The sorption mechanism was considered.     

Zinc(II), Cadmium(II), Mercury(II), and Lead(II) Complexes of N-Carboxymethyl-D,L-threonine in Aqueous Solution

The formation of complexes of Zn(II), Cd(II), Hg(II), and Pb(II) and N-carboxymethyl-D,L-threonine (H₂CMT, H₂L) in aqueous solutions has been studied by spectrophotometric and potentiometric methods. The complexation model for each system has been established by the HYPERQUAD program from the potentiometric data. Three different behaviors are found: ML₂H, MLH, ML, MLOH, and ML₂ complexes are formed by Zn(II) and Cd(II) ions, ML₂H, ML, MLOH, and ML₂ are formed by Hg(II) ion, and only 1/1 complexes MLH, ML, and MLOH are formed by the Pb(II) ion. The formation constants determined for all these complexes allow simulation of experimental titration curves with good agreement. The speciation of multimetal systems with H₂CMT shows that this compound is a good and selective ligand at low pH for the Hg(II) ion.     

Structural Studies on Saturated Aqueous Solutions of Manganese(II), Cobalt(II), and Nickel(II) Chlorides by X-ray Diffraction

As a part of our studies on crystallization processes of electrolytes, the structure of aqueous solutions of MCl₂ (M = Mn, Co, Ni) equilibrated with hydrate crystals, MCl₂ · mH₂O (m = 6, 4, 2), was investigated by means of X-ray diffraction at 25, 40, 55, and 70°C. The complexes formed in MnCl₂ solutions, were found to be mixed–ligand chloroaqua octahedral complexes of M²⁺ ions with the Mn—O and Mn—Cl distances of about 220 and 251 pm, respectively. The average number of Mn—Cl and Mn—O interactions increased from 1.2 to 1.9 and decreased from 4.8 to 4.1, respectively, with changing MnCl₂ solutions from Mn25 (MnCl₂ solution at 25°C) to Mn70 (MnCl₂ solution at 70°C). In the octahedral species of Co²⁺, the Co—O and Co—Cl distances were found to be about 211 and 240 pm, respectively. With an increase in the saturated concentration by changing temperature from 25 to 70°C, the average coordination number of the Co—Cl contact per Co²⁺ increased from 0.5 to 1.2, and the average number of Co—O interactions decreased from 5.5 to 4.8. The structural analysis was carried out by taking into consideration the existence of the tetrahedral species in the solutions saturated at 40, 55, and 70°C, on the assumption of the existence of [CoCl₄]^2–. The Co—Cl distance was found to be 228 pm, while the number of Co—Cl interactions in the [CoCl₄] complex was calculated to be 3.7 by the least-squares calculations. The Ni—O and Ni—Cl distances were estimated to be about 206 and 237 pm, respectively. The frequency factor n of the Ni—O and Ni—Cl interactions decreased monotonously from 5.6 to 5.0 and increased from 0.4 to 1.0, respectively, with increasing NiCl₂ concentration. The n values of the Co—Cl and Ni—Cl interactions of the octahedral complexes increased sharply with concentration at higher concentrations. Comparing structures of the complexes in the saturated solutions and the hydrate crystals of these metal ions, we discussed a role of the complexing species on crystallization of the hydrates.     

Spectrophotometric Determination of Cobalt(II), Nickel(II) and Copper(II) with Acenaphthenequinone Monosemicarbazone (AQSC)

Cobalt(II), nickel(II) and copper(II) complexation with acenaphthenequinone monosemicarbazone (AQSC) has been studied spectrophotometrically. The Co(II), Ni(II) and Cu(II) complexes are soluble in ethanol medium and exhibit maximum absorbance at 410, 420 and 430 nm, respectively. The sensitivity of the reactions are 0.012, 0.02 and 0.01 μg/cm² for cobalt, nickel and copper systems. All the three complexes show maximum and constant absorbance in the pH range 8.4 to 9.8, 6.3 to 8.4 and 5.4 to 8.0 for Co-AQSC, Ni-AQSC and Cu-AQSC, respectively. Nickel and copper in some alloys have also been analysed.     

Manganese(II), Cobalt(II), and Nickel(II) Perchlorate Complexes Containing N,O Donor Macrocyclic Ligands

Mononuclear macrocyclic complexes of manganese(II ), cobalt(II ) and nickel(II ) perchlorate using 10 different oxaazamacrocyclic ligands (L¹ — L¹⁰) have been prepared and characterized. The complexation reactions with the diiminic ligands were obtained by template condensation of the appropriate dialdehyde and diamine precursors; the reduced macrocycle complexes were synthesized using a direct route. The complexes have been characterized by elemental analyses, molar conductivity, mass spectrometry, IR, UV‐vis spectroscopy, diffuse reflectance and magnetic susceptibility measurements.     

Analytical Separation of Copper(II), Cobalt(II) and Nickel(II) Using Polymer Bound Anthrantic Acid

Abstract

The preferential complexing tendency of different nietal ions towards chelating agents anchored on a polymer has been used for separation of transition metals. the anthranilic acid group was anchored on the polymeric cellulose back-bone by successive coupling with trifunctional reagent cyanuric chloride, in diozane medium, at pH 7 and 9–10, respectively. This polymer bound chelating agent was used to separate copper(II), nickel(II) and cobalt(II) in the concentration range 1.0–0.1 mmol/L. the separation of a mixture of two components was quantitative using column chromatography.