The physicochemical properties of micro/mesoporous materials prepared by the recrystallization of zeolite BEA

Micro-mesoporous materials with various ratios between micro- and mesopores were prepared by the recrystallization of zeolite BEA in an alkaline medium in the presence of cetyltrimethylammonium bromide. The materials were characterized by X-ray diffraction, low-temperature nitrogen adsorption, and IR spectroscopy. Recrystallization under mild conditions did not cause substantial changes in the number of acid centers but increased the accessibility of acid centers to large-sized molecules because of the creation of mesopores. An increase in the degree of recrystallization caused first partial and then complete zeolite transformation into MSM-41 mesoporous aluminosilicate, which was accompanied by a decrease in the number of acid centers. The IR spectra were used to determine the diffusion coefficients of cumene in the initial and recrystallized samples. Recrystallization increased the diffusion coefficient by 3–4 times. Original Russian Text ? V.V. Ordomskii, Yu.V. Monakhova, E.E. Knyazeva, N.S. Nesterenko, I.I. Ivanova, 2009, published in Zhurnal Fizicheskoi Khimii, 2009, Vol. 83, No. 6, pp. 1150–1155.     

萘普生在介孔分子筛MCM-41中的负载及其溶出性能

用含氨基的偶联剂修饰介孔分子筛MCM-41的表面,将修饰前和修饰后的介孔分子筛分别负载难溶性药物萘普生（NAP）,利用X射线衍射、傅里叶变换红外光谱、差示扫描量热分析、扫描电子显微镜、透射电子显微镜和N2吸附 脱附分析等技术分别对其进行了结构表征和性能测试。 结果表明,药物分子存在于分子筛的孔道中。 负载在MCM-41中的萘普生溶出速率远优于原料药,60 min时大约溶出70%。 氨基修饰后的药物释放速率比修饰前有所减慢,表明可通过氨基修饰调节释放速率。     

Effect of Phosphorylation of Si-MCM-41 and Ti-Si-MCM-41 Mesoporous Molecular Sieves on Their Structure-Adsorption and Acid Properties

Transmission electron microscopy, X-ray diffraction, nitrogen and argon adsorption, thermal analysis, thermoprogrammed ammonia desorption, and ¹H MAS NMR spectroscopy were used to show that phosphorylation by POCl₃ yields MCM-41 silica gel and Ti-MCM-41 titanium-silica gel mesoporous molecular sieves with about 1.1 mmol/g acid sites consisting largely of hydroxyl group protons of supported phosphoric acid. These materials display catalytic activity in the esterification of acetic acid by ethanol.     

有序介孔二氧化硅对正丁醛的吸附性能

合成了一系列具有不同孔结构与性质的有序介孔二氧化硅材料SBA-15、MCM-41、SBA-16、KIT-6, 同时通过改变水热温度制备了不同孔径大小的SBA-15, 并利用小角X射线散射、透射电镜、扫描电镜和氮气吸附-脱附等手段, 对其介孔结构进行了表征. 以正丁醛为探针分子, 考察了其对有机醛的吸附, 并与Y-沸石的吸附性能做了对比. 结果表明, 材料的介孔比表面积与其对正丁醛的吸附量成正比, 吸附等温线符合Langmuir 模型, 属于单层吸附, 具有最大介孔比表面积的MCM-41对正丁醛的吸附量最大(484 mg·g^-1). 最后将SBA-15添加到卷烟滤嘴中, 实验结果表明, SBA-15能显著降低卷烟烟气中巴豆醛的释放量.     

SiO_2改性MCM-22分子筛上联苯与环己醇的择形烷基化反应

以正硅酸四乙酯(TEOS)为修饰剂,采用化学液相沉积法(CLD)对MCM-22分子筛进行改性,制备了一系列SiO_2改性的MCM-22催化剂。采用X射线衍射(XRD)、N_2物理吸附-脱附、氨程序升温脱附(NH_3-TPD)、吡啶吸附红外光谱(Py-IR)对催化剂性质进行了表征。结果表明SiO_2主要沉积在MCM-22分子筛的外表面,外表面上的Br?nsted酸位量明显减少,但对分子筛的总酸量影响不大。考察了改性催化剂用于联苯与环己醇的择形烷基化反应制备线性4-环己基联苯(4-CBP)及4,4′-环己基联苯(4,4′-DCBP)的催化性能。在常压条件下,温度为190°C时反应200 min,4-CBP与4,4′-DCBP的选择性分别为80.4%与63.7%。结合表征数据,发现SiO_2沉积对发生在催化剂外表面Br?nsted酸位上的异构化反应有明显的抑制作用。此外,重复使用5次后的改性分子筛经过焙烧复原,活性与选择性基本恢复。     

MCM-41分子筛担载纳米TiO2复合材料光催化降解罗丹明B

采用溶胶-凝胶法将TiO2担载在介孔MCM-41分子筛上, 制备了不同TiO2含量的系列TiO2/MCM-41复合材料, 利用X射线衍射、N2吸附、紫外-可见光谱和透射电镜等方法对其进行表征. TiO2的晶型为锐钛矿相, 复合材料的比表面积和孔体积随其中TiO2担载量(复合材料中TiO2与MCM-41的质量比)的增加而减小, TiO2的平均粒径随其担载量的增加而增大. 以罗丹明B的光催化降解为探针反应, 评价了TiO2/MCM-41复合材料的光催化降解活性. 结果表明, 在紫外光照射下, 罗丹明B在该复合材料上的光催化降解反应遵循一级反应动力学, 复合材料对罗丹明B的光催化降解活性明显高于商用TiO2 (P-25), 复合材料的光催化降解活性由复合材料的吸附能力和所含TiO2的光催化活性共同决定.     

Synthesis and catalytic performance of ZSM-5/MCM-41 composite molecular sieve from palygorskite

ZSM-5/MCM-41 composite molecular sieve has been hydrothermally synthesized through a two-step crystallization process using palygorskite (PAL) as silicon and aluminum source. The products were characterized by various means and their catalytic properties for acetalization of cyclohexanone and esterification of acetic acid and n-butanol were also investigated. In the first step ZSM-5 zeolite could be formed from the acid-treated PAL after hydrothermal treatment using tetrapropylammonium bromide as template. XRD patterns, N₂ adsorption and desorption data, and TEM images show that the composite obtained in the secondary step had a well-ordered mesoporous MCM-41 phase and a microporous ZSM-5 zeolite phase. Compared with ZSM-5, ZSM-5/MCM-41 composite possessed more total acid amount, weak acid sites and large pore structure due to the formation of MCM-41 and exhibited higher catalytic activity for the acetalization and esterification reaction.     

有序介孔二氧化硅对正丁醛的吸附性能

合成了一系列具有不同孔结构与性质的有序介孔二氧化硅材料SBA-15、MCM-41、SBA-16、KIT-6,同时通过改变水热温度制备了不同孔径大小的SBA-15,并利用小角X射线散射、透射电镜、扫描电镜和氮气吸附-脱附等手段,对其介孔结构进行了表征.以正丁醛为探针分子,考察了其对有机醛的吸附,并与Y-沸石的吸附性能做了对比.结果表明,材料的介孔比表面积与其对正丁醛的吸附量成正比,吸附等温线符合Langmuir模型,属于单层吸附,具有最大介孔比表面积的MCM-41对正丁醛的吸附量最大(484 mg·g-1).最后将SBA-15添加到卷烟滤嘴中,实验结果表明,SBA-15能显著降低卷烟烟气中巴豆醛的释放量.     

微孔/介孔复合分子筛的合成及其对CO2的吸附性能

采用两步晶化法将合成的沸石前驱液(S)或沸石固体粉末(P)经不同浓度(c)的NaOH处理后, 分别以表面活性剂十六烷基三甲基溴化铵(CTAB)软模板或介孔炭(Meso-C)硬模板为导向剂, 自组装合成S-β-MCM41(c)、P-β-MCM41(c)、P-ZSM-MCM41(c)、P-ZSM-C系列微孔/介孔复合分子筛. 考察了沸石分子筛种类、碱处理液浓度以及介孔模板剂对合成复合分子筛结构与性能的影响. X射线衍射(XRD)、透射电子显微镜(TEM)和氮气吸附-脱附表征结果表明产物具有微孔/介孔多级孔结构. 该材料对CO₂的吸附能力比纯微孔或介孔材料均有明显提高, 其中P-ZSM-MCM41(2)的CO₂吸附容量最大可达1.51 mmol·g^-1, 为ZSM-5沸石吸附量的两倍多.     

Effect of phosphorus on the performance of IM-5 for the alkylation of toluene with methanol into p-xylene

IM-5 zeolite was modified with different amounts of phosphorus species. The effect of the introduction of phosphorus into IM-5 zeolite (P-IM-5) was evaluated on the alkylation of toluene with methanol. The samples were characterized by X-ray diffraction, scanning electron microscopy, N₂ physical adsorption, ³¹P magic angle spinning nuclear magnetic resonance, inductively coupled plasma optical emission spectroscopy, temperature-programmed desorption of ammonia, Fourier transform infrared spectra of pyridine, 2,6-di-tert-butyl-pyridine and 2,6-lutidine adsorption, and thermogravimetric analysis after reaction. The results showed that the zeolite structure was not changed, but the total amount of acid sites decreased with increasing phosphorus loading. The phosphorus-modified IM-5 samples exhibited much higher stability on the alkylation of toluene with methanol than the parent zeolite and the optimal phosphorus amount added was 0.5 wt %. The excellent catalytic performance could be ascribed to the low ratio of B/L acid sites upon phosphorus modification, which suppressed coke formation.     

MCM-22型分子筛的合成及其用于生产异丙苯的催化性能

MCM-22 molecular sieve was first reported by Rubin et al[1] in Mobil Company.Similar to ZSM-5 zeolite, MCM-22 belongs to the category of medium pore zeolites.However, it possesses unique structural features[2] that have not been demonstrated before. The structure of MCM-22 was resolved by Mobil scientists using high resolution microscopy and X-ray diffraction analysis. It is found that MCM-22 consists of two independent and non-interconnecting channel systems, each accessible through 10-ring apertures. One of these pore systems is composed of uniform circular 10-ring pores about 0.6 nm. The other is composed of 12-ring egg-shaped supercages with inner free diameter of 0.71 nm and inner height of 1.82 nm. Usually the zeolite crystallizes as thin sheets or plates of stocked layers. Therefore, MCM-22 has been actively studied and this peculiar zeolite may have potential applications in the petrochemical and petroleum industries in the near future, including reactions such as disproportionation[3], catalytic cracking of hydrocarbons[4], aromatic/ethylene alkylation[5], isoalkane/olefins[6] and methanol/olefins alkylation[7] etc.     

FER沸石再晶化制备介孔分子筛及其催化性能

在十六烷基三甲基溴化铵存在下,在浓NaOH溶液中降解并再晶化FER沸石,得到单一有序的介孔分子筛．通过X射线衍射（XRD）,傅里叶变换红外光谱（FT-IR）,热重（DTG）,N2吸附,NH3程序升温脱附（NH3-TPD）及水热处理等手段对合成样品的结构性能进行了详细表征,并以混合C4烃催化裂解制低碳烯烃作为探针反应考察...     

A novel method for synthesis of mesoporous ZSM-5 from iron ore tailings

Mesoporous ZSM-5 was prepared from iron ore tailings (IOT) using a two-step process. Mesoporous MCM-41 was first synthesized using cetyltrimethylammonium bromide (CTAB) as mesoporous template and IOT as silica source. The CTAB in the as-synthesized MCM-41 was used as the mesoporogen to produce the mesoporous ZSM-5, by recrystallizing the amorphous walls of MCM-41 with tetrapropylammonium bromide (TPABr) as the structure-directing agent via solid-phase conversion. To evaluate the textural properties of mesoporous ZSM-5, the as-synthesized samples were characterized using x-ray diffraction, scanning electron microscopy, transmission electron microscopy, ²⁹Si, ²⁷Al magic angle spinning nuclear magnetic resonance spectroscopy, and nitrogen adsorption. The results show that phase separation between the surfactant and zeolite crystals was avoided in the solid-phase conversion process, which transforms the as-synthesized MCM-41 to mesoporous zeolite. Therefore, the synthetic route presented herein provides a novel method for the synthesis of mesoporous ZSM-5 from IOT.

     

炭黑颗粒及氟粒子辅助法合成多级结构MCM-22分子筛及其催化性能

以碳黑为第二模板剂在氟离子体系中一步水热合成了多级结构MCM-22分子筛组装体（简称为MCM-22-FC）。考察了碳黑和氟离子对MCM-22分子筛形貌和催化性能的影响。MCM-22-FC分子筛是由大量片状晶体交错生长形成的组装体结构,其中MCM-22的片层结构更薄,在其固有的微孔中存在的晶间孔呈现大孔和介孔的特征。MCM-22-FC负载Mo后得到的Mo/MCM-22-FC催化剂在甲烷无氧芳构化反应（MDA）中提高了苯收率和芳烃选择性,并且提高了催化剂的寿命。通过氨气程序升温脱附（NH₃-TPD）表征,吡啶红外（Py-IR）表征,结合热重（TG）分析,得出的结论是Mo/MCM-22-FC在MDA中优越的催化性能是由于氟离子进入到分子筛骨架当中,形成具有拉电子效应的结构单元,从而提高了分子筛的Brönsted酸量,较多的Brönsted酸性位将更多的Mo物种迁移至分子筛孔道内部,形成更多的MoC_x或MoO_xC_y活性物种以及更有利于大分子产物扩散的MCM-22薄片层的结构。少量过剩的Brönsted酸性位在成型后保留在Mo/HMCM-22-FC催化剂活性中心抑制了积碳的形成,也有助于改善芳烃的选择性。     

Amine functionalized MCM-41: An active and reusable catalyst for Knoevenagel condensation reaction

This paper reports preparation, characterization of amine modified mesoporous crystalline MCM-41 and its application in Knoevenagel condensation reaction. Amine modified MCM-41 was prepared by co-condensation and post-synthesis methods. The samples were characterized by X-ray powder diffraction, Fourier-transfer infrared spectroscopy (FTIR), thermo gravimetric analysis (TGA), differential thermal analysis (DTA), scanning electron micrograph (SEM), ²⁹Si magic-angle spinning (MAS), nuclear magnetic resonance (NMR), diffuse reflectance spectra (DRS), nitrogen adsorption–desorption and CHN analysis. X-ray diffraction patterns indicate that the modified materials retain the standard MCM-41 structure. SEM study exhibits that the arrangement of particles for 12.8% amine modified MCM-41 is well ordered and spherical in nature. CHN analysis supports that complete hydrolysis of ethoxy groups take place in 12.8% amine modified sample. From the NMR study it is confirmed that the surface coverage is 40% in 12.8% amine modified sample. The base catalytic activity of hybrid MCM-41 materials such as amine (post-synthesis and co-condensation methods) and surfactant functionalized materials for condensation reaction between benzaldehyde and diethyl malonate in solvent free, room temperature synthesis of cinnamic acid was evaluated and correlated with the surface and textural properties. Sample containing 12.8 wt% amine loaded by co-condensation method showed highest malonic ester conversion (92%) and selectivity (98%) for cinnamic acid.     

利用双模板剂的多级孔ZSM-11分子筛的合成、表征和催化性能

ZSM-11与ZSM-5分子筛具有相似的孔道结构,通常表现出相似的催化性能,但近年来的研究发现,ZSM-11分子筛在某些反应过程具有明显优于ZSM-5的催化性能,因而逐渐引起科研界和工业界的广泛重视.但受其微孔尺寸的限制,在使用过程中往往容易积碳,并导致快速失活.为此,向微孔体系引入介孔制备多级孔ZSM-11分子筛是一种规避上述问题的有效方式.我们研究组前期已对分子筛进行碱处理脱硅及在该体系中加入CTAB制备多级孔分子筛进行了系统研究.在此基础上本文通过改变介孔模板剂十六烷基三甲基溴化铵(CTAB)和微孔模板剂四丁基溴化铵(TBABr)的摩尔比(R),采用一步法制备了一系列多级孔ZSM-11分子筛材料,并通过多种表征手段对材料的性质进行了系统研究.随着R值的增加,广角XRD测试结果表明,产物的结晶度逐渐下降,同时小角XRD测试结果表明产物中逐渐产生有序介孔相; XRF测试结果表明,产物的总包硅铝比呈上升趋势; SEM表征结果表明,首先棒状纳米晶团聚体形貌的ZSM-11分子筛的晶粒尺寸逐渐降低,随后晶粒之间插入无定形样品,直至最终产物几乎完全为无定形材料构成; TEM图片与上述表征结果一致,样品初始晶格条纹清晰且晶粒边缘规整,随后晶粒边缘开始弯曲不平,接着晶体样品中开始产生有序介孔材料,最终几乎完全变为有序介孔材料.综合上述表征结果和相关文献可推测,该有序介孔材料为类MCM-41材料.另外,我们采用N2物理吸附对材料的织构性质进行了考察,发现随着R值增大,产物的微孔减少,介孔增多.然而TEM结果表明,在类MCM-41产生之前,样品中介孔的增多并非来源于晶内孔,而是来源于晶粒之间的堆积孔,这是由于在合成过程中CTAB胶束嵌入ZSM-11的晶粒之间所导致.合成体系的碱度对产物的物化性质和织构性质也起了非常重要的作用.我们将这个体系与NaOH+CTAB对分子筛进行脱硅后处理体系进行了对比,发现虽然前者只能产生晶间孔而后者可产生晶内孔,但碱度对两者的作用相似,即降低碱度均可导致类MCM-41有序介孔相的产生.此外,还通过NH3-TPD和Py-IR技术对材料的酸性进行了考察.基于上述研究结果,提出了多级孔ZSM-11分子筛的形成机理.随着R值的变化,CTAB分别起了覆盖效应、胶束效应和模板效应.这些效应在合成多级孔ZSM-11分子筛过程中相互协同,同时又与TBABr的结构导向效应相互竞争,进而影响合成产物的孔结构、形貌、酸性以及用于二甲醚和苯烷基化的催化性能.     

Effect of zeolite precursor on the formation of MCM-41 molecular sieve containing zeolite Y building units

The effect of zeolite Y precursor on the formation of MCM-41 containing zeolite Y building units has been investigated by means of UV Raman spectroscopy, X-ray diffraction (XRD), infrared spectroscopy (IR) and electron microscopy (SEM and TEM). Study of the precursor formation shows that 4-membered ring species are formed at the early stages of crystallization. Zeolite Y begins to appear after crystallization for 4 h, and its crystallinity increases with increasing crystallization time. However, lowering the pH value to ～9.3 in the second step not only facilitates the polymerization of silicate species, but also leads to the structural change of the precursors. Pure MCM-41 mesoporous phase containing zeolite Y building units and the mixture of zeolite Y and MCM-41 can be formed combining the effects of the precursor structure and the pH adjustment.     

由纳米晶前驱体组装有序介孔silicalite-1分子筛

采用两步法将不同尺寸的silicalite-1分子筛纳米晶种通过自组装合成了一系列有序介孔silicalite-1分子筛。首先将强碱性的silicalite-1前驱体分别加热不同时间得到纳米晶种,然后在类似合成SBA-15的强酸性条件下组装成有序的介孔材料。合成条件的剧烈变化阻止了分子筛晶种的继续长大,并在三嵌段共聚物模板的诱导下组装成有序介孔材料。这种“自下而上”的方法制备有序介孔分子筛同时包含微孔和介孔。氮气吸脱附结果表明所制备的介孔分子筛材料均表现了很大的比表面积(730 m2/g以上)。     

Electron radiation damage of MCM-41 and related materials.

The article compares the relative stability of MCM-41 and related mesoporous materials in electron beam at an accelerating voltage of 100-300 kV. The work encountered in electron microscopy presents a comparison with similar research that has been carried out on nonporous and microporous silicates, especially alpha-quartz and zeolite Y. The trends in stability are analyzed, classifying the effects of sample preparation, organic and inorganic moieties, and electron accelerating voltage on beam stability. A higher synthesis temperature, the use of an acid catalyst in the synthesis, and the presence of additional organic or inorganic material within the channels were all found to stabilize these materials. The dose required to completely disrupt the structure increased with accelerating voltage for nearly all samples, suggesting a primarily radiolytic damage mechanism. The exception, MCM-41 containing nanometer-sized titania particles in its channels, was found to be almost insensitive to accelerating voltage.     

混合胺体系中 MCM-49/ZSM-35 复合分子筛的晶化过程

 采用 X 射线衍射、N2 吸附-脱附、扫描电镜和傅里叶变换红外光谱等技术, 研究了 MCM-49/ZSM-35 复合分子筛在 Na2O-SiO2-Al2O3-CHA (环己胺)-HMI (六亚甲基亚胺)-H2O 合成体系中, 先在低温 80 ?C 老化 4 h, 再经 160 ?C 晶化不同时间的演变过程. 结果表明, 在该混合胺体系中, 首先生成 MCM-49 分子筛, 随着晶化时间的延长, 形成 ZSM-35 含量逐渐增加的 MCM-49/ZSM-35 复合分子筛, 最后生成纯 ZSM-35 分子筛; ZSM-35 的生成是以 MCM-49 分子筛的消耗为代价的.