Unusual Transformation from a Solvent‐Stabilized 1D Coordination Polymer to a Metal–Organic Framework (MOF)‐Like Cross‐Linked 3D Coordination Polymer

An unusual 1D‐to‐3D transformation of a coordination polymer based on organic linkers containing highly polar push–pull π‐conjugated side chains is reported. The coordination polymers are synthesized from zinc nitrate and an organic linker, namely, 2,5‐bis{4‐[1‐(4‐nitrophenyl)pyrrolidin‐2‐yl]butoxy}terephthalic acid, which possesses highly polar (4‐nitrophenyl)pyrrolidine groups, with high dipole moments of about 7 D. The coordination polymers exhibit an unusual transformation from a soluble, solvent‐stabilized 1D coordination polymer into an insoluble, metal–organic framework (MOF)‐like 3D coordination polymer. The coordination polymer exhibits good film‐forming ability, and the MOF‐like films are insoluble in conventional organic solvents.     

polyMOFs: A Class of Interconvertible Polymer‐Metal‐Organic‐Framework Hybrid Materials

Preparation of porous materials from one‐dimensional polymers is challenging because the packing of polymer chains results in a dense, non‐porous arrangement. Herein, we demonstrate the remarkable adaptation of an amorphous, linear, non‐porous, flexible organic polymer into a three‐dimensional, highly porous, crystalline solid, as the organic component of a metal–organic framework (MOF). A polymer with aromatic dicarboxylic acids in the backbone functioned as a polymer ligand upon annealing with Zn^II, generating a polymer–metal–organic framework (polyMOF). These materials break the dogma that MOFs must be prepared from small, rigid ligands. Similarly, polyMOFs contradict conventional polymer chemistry by demonstrating that linear and amorphous polymers can be readily coaxed into a highly crystalline, porous, three‐dimensional structure by coordination chemistry.     

Metal–Organic Organopolymeric Hybrid Framework by Reversible [2+2] Cycloaddition Reaction

Organic polymers are usually amorphous or possess very low crystallinity. The metal complexes of organic polymeric ligands are also difficult to crystallize by traditional methods because of their poor solubilities and their 3D structures can not be determined by single‐crystal X‐ray crystallography owing to a lack of single crystals. Herein, we report the crystal structure of a 1D Zn^II coordination polymer fused with an organic polymer ligand made in situ by a [2+2] cycloaddition reaction of a six‐fold interpenetrated metal–organic framework. It is also shown that this organic polymer ligand can be depolymerized in a single‐crystal‐to‐single‐crystal (SCSC) fashion by heating. This strategy could potentially be extended to make a range of monocrystalline metal organopolymeric complexes and metal–organic organopolymeric hybrid materials. Such monocrystalline metal complexes of organic polymers have hitherto been inaccessible for materials researchers.     

Polymer‐based monolithic column with incorporated chiral metal–organic framework for enantioseparation of methyl phenyl sulfoxide using nano‐liquid chromatography

A new approach to the preparation of enantioselective porous polymer monolithic columns with incorporated chiral metal–organic framework for nano‐liquid chromatography has been developed. While no enantioseparation was achieved with monolithic poly(4‐vinylpyridine‐co‐ethylene dimethacrylate) column, excellent separations of both enantiomers of (±)‐methyl phenyl sulfoxide were achieved with its counterpart prepared after admixing metal–organic framework [Zn₂(benzene dicarboxylate)(l‐lactic acid)(dmf)], which is synthesized from zinc nitrate, l ‐lactic acid, and benzene dicarboxylic acid in the polymerization mixture. These novel monolithic columns combined selectivity of the chiral framework with the excellent hydrodynamic properties of polymer monoliths, may provide a great impact on future studies in the field of chiral analysis by liquid chromatography.     

A novel method for preparation of exfoliated UV-curable polymer/clay nanocomposites

The half adduct of isophorone diisocyanate and 2-hydroxyethyl acrylate (IPDI-HEA), as a reactive organic modifier, was used to functionalize Na-montmorillonite (Na-MMT) clay. Unlike the electronic interaction in the conventional cation-exchange method, the driving force for the organic modification came from the chemical reaction between IPDI-HEA and framework hydroxyl groups on the surface of clay. With high degree of organic modification (48%), the d-spacing of clay layer was greatly enlarged to 3.32 nm, and the clay became more organophilic. After in situ photopolymerization among the IPDI-HEA grafted MMT clay, monomers and oligomers, the exfoliated polymer/clay nanocomposites were obtained. X-ray diffraction and transmission electron microscopy were used to detect the structure and morphology of the clay dispersed in the polymer matrix. Compared with the pure polymer materials, the exfoliated polymer/clay nanocomposites exhibited enhancements in mechanical and thermal properties.     

Metal organic framework–organic polymer monolith stationary phases for capillary electrochromatography and nano-liquid chromatography

In this study, metal organic framework (MOF)–organic polymer monoliths prepared via a 5-min microwave-assisted polymerization of ethylene dimethacrylate (EDMA), butyl methacrylate (BMA), and 2-acrylamido-2-methylpropane sulfonic acid (AMPS) with the addition of various weight percentages (30–60%) of porous MOF (MIL-101(Cr)) were developed as stationary phases for capillary electrochromatography (CEC) and nano-liquid chromatography (nano-LC). Powder X-ray diffraction (PXRD) patterns and nitrogen adsorption/desorption isotherms of these MOF–organic polymer monoliths showed the presence of the inherent characteristic peaks and the nano-sized pores of MIL-101(Cr), which confirmed an unaltered crystalline MIL-101(Cr) skeleton after synthesis; while energy dispersive spectrometer (EDS) and micro-FT-IR spectra suggested homogenous distribution of MIL-101(Cr) in the MIL-101(Cr)–poly(BMA–EDMA) monoliths. This hybrid MOF–polymer column demonstrated high permeability, with almost 800-fold increase compared to MOF packed column, and efficient separation of various analytes (xylene, chlorotoluene, cymene, aromatic acids, polycyclic aromatic hydrocarbons and trypsin digested BSA peptides) either in CEC or nano-LC. This work demonstrated high potentials for MOF–organic polymer monolith as stationary phase in miniaturized chromatography for the first time.     

A Novel Hybrid Metal–Organic Framework–Polymeric Monolith for Solid‐Phase Microextraction

This study describes the fabrication of a novel hybrid metal–organic framework– organic polymer (MOF–polymer) for use as a stationary phase in fritless solid‐phase microextraction (SPME) for validating analytical methods. The MOF–polymer was prepared by using ethylene dimethacrylate (EDMA), butyl methacrylate (BMA), and an imidazolium‐based ionic liquid as porogenic solvent followed by microwave‐assisted polymerization with the addition of 25 % MOF. This novel hybrid MOF–polymer was used to extract penicillin (penicillin G, penicillin V, oxacillin, cloxacillin, nafcillin, dicloxacillin) under different conditions. Quantitative analysis of the extracted penicillin samples using the MOF–organic polymer for SPME was conducted by using capillary electrochromatography (CEC) coupled with UV analysis. The penicillin recovery was 63–96.2 % with high reproducibility, sensitivity, and reusability. The extraction time with the proposed fabricated SPME was only 34 min.     

An n-channel two-dimensional covalent organic framework

Co-condensation of metallophthalocyanine with an electron-deficient benzothiadiazole (BTDA) block leads to the formation of a two-dimensional covalent organic framework (2D-NiPc-BTDA COF) that assumes a belt shape and consists of AA stacking of 2D polymer sheets. Integration of BTDA blocks at the edges of a tetragonal metallophthalocyanine COF causes drastic changes in the carrier-transport mode and a switch from a hole-transporting skeleton to an electron-transporting framework. 2D-NiPc-BTDA COF exhibits broad and enhanced absorbance up to 1000 nm, shows panchromatic photoconductivity, is highly sensitive to near-infrared photons, and has excellent electron mobility as high as 0.6 cm(2) V(-1) s(-1).     

A Nitrogen‐Rich 2D sp2‐Carbon‐Linked Conjugated Polymer Framework as a High‐Performance Cathode for Lithium‐Ion Batteries

A two‐dimensional (2D) sp²‐carbon‐linked conjugated polymer framework (2D CCP‐HATN) has a nitrogen‐doped skeleton, a periodical dual‐pore structure and high chemical stability. The polymer backbone consists of hexaazatrinaphthalene (HATN) and cyanovinylene units linked entirely by carbon–carbon double bonds. Profiting from the shape‐persistent framework of 2D CCP‐HATN integrated with the electrochemical redox‐active HATN and the robust sp² carbon‐carbon linkage, 2D CCP‐HATN hybridized with carbon nanotubes shows a high capacity of 116 mA h g^?1, with high utilization of its redox‐active sites and superb cycling stability (91 % after 1000 cycles) and rate capability (82 %, 1.0 A g^?1 vs. 0.1 A g^?1) as an organic cathode material for lithium‐ion batteries.     

Removal of Acidic Organic Ionic Dyes from Water by Electrospinning a Polyacrylonitrile Composite MIL101(Fe)-NH2 Nanofiber Membrane

A nanofiber metal–organic framework filter, a polyacrylonitrile (PAN) nanofiber membrane composite with an iron/2-amino-terephthalic acid-based metal–organic framework (MIL101(Fe)-NH₂), was prepared by one-step electrospinning. MIL101(Fe)-NH₂ was combined into the polymer nanofibers in situ. PAN-MIL101(Fe)-NH₂ composite nanofiber membranes (NFMs) were prepared from a homogeneous spinning stock containing MIL101(Fe)-NH₂ prebody fluid and PAN. Crystallization of MIL101(Fe)-NH₂ and solidification of the polymer occurred simultaneously during electrospinning. The PAN-MIL101(Fe)-NH₂ composite NFM showed that MIL101(Fe)-NH₂ was uniformly distributed throughout the nanofiber and was used to adsorb and separate acidic organic ionic dyes from the aqueous solution. The results of Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction analysis showed that MIL101(Fe)-NH₂ crystals were effectively bonded in the PAN nanofiber matrix, and the crystallinity of MIL101(Fe)-NH₂ crystals remained good, while the distribution was uniform. Owing to the synergistic effect of PAN and the MIL101(Fe)-NH₂ crystal, the PAN-MIL101(Fe)-NH₂ composite NFM showed a fast adsorption rate for acidic ionic dyes. This study provides a reference for the rapid separation and purification of organic ionic dyes from wastewater.     

Metalo Hydrogen-Bonded Organic Frameworks (MHOFs) as New Class of Crystalline Materials for Protonic Conduction

Recently, proton conduction has been a thread of high potential owing to its wide applications in fuel-cell technology. In the search for a new class of crystalline materials for protonic conductors, three metalo hydrogen-bonded organic frameworks (MHOFs) based on [Ni(Imdz)₆]²⁺ and arene disulfonates (MHOF1 and MHOF2) or dicarboxylate (MHOF3) have been reported (Imdz=imidazole). The presence of an ionic backbone with charge-assisted H-bonds, coupled with amphiprotic imidazoles made these MHOFs protonic conductors, exhibiting conduction values of 0.75×10⁻³, 3.5×10⁻⁴ and 0.97×10⁻³ S cm⁻¹, respectively, at 80 °C and 98 % relative humidity, which are comparable to other crystalline metal-organic framework, coordination polymer, polyoxometalate, covalent organic framework, and hydrogen-bonded organic framework materials. This report initiates the usage of MHOF materials as a new class of solid-state proton conductors.     

Stepwise deposition of metal organic frameworks on flexible synthetic polymer surfaces

Thin films of [Cu(3)(btc)(2)](n) (btc = 1,3,5-benzenetricarboxylate) metal organic framework were deposited in a stepwise manner on surfaces of flexible organic polymers. The thickness of films can be precisely controlled. The deposition of the first cycles was monitored by UV-vis spectroscopy. The porosity was proven by the adsorption of pyrazine, which was monitored by FT-IR and thermogravimetric analysis. The deposition of MOF thin films on flexible polymer surfaces might be a new path for the fabrication of functional materials for different applications, such as protection layers for working clothes and gas separation materials in the textile industry.     

Benzobisthiazole Polymer with Resonance-assisted Hydrogen Bonds for High-performance Transistor and Solar Cell Applications

Benzobisthiazole polymer with resonance-assisted hydrogen bonds(RAHBs)has been synthesized for both organic field-effect transistor and polymer solar cell applications.The properties of the hydrogen bonded polymer are compared with the reference polymer without RAHBs.Single-crystal X-ray diffraction analyses of the building block reveal that the RAHB interactions are formed between the carbamate hydrogen and imine nitrogen of the thiazoles.The hydrogen donor and acceptor are connected byπ-conjugated molecular framework and the hydrogen-bridged quasi aromatic rings lock the conformation of the building block.The building block adopted a layered sandwich packing in crystal instead of slipped herringbone stacking which was often found in the crystal of benzobisthiazole derivatives.The polymer PCBTZ-TT with RAHBs showed deeper HOMO/LUMO energy level(about 0.2 eV)than reference polymer.The PCBTZ-TT demonstrated the hole mobility of0.96 cm²·V^-1·s^-1 in field-effect transistor devices and achieved power conversion efficiency of 13.6%in solar cell devices with Y6 as acceptor without any additive.     

A Metal Chelating Porous Polymeric Support: The Missing Link for a Defect‐Free Metal–Organic Framework Composite Membrane

Since the discovery of size‐selective metal–organic frameworks (MOFs), researchers have tried to incorporate these materials into gas separation membranes. Impressive gas selectivities were found, but these MOF membranes were mostly made on inorganic supports, which are generally too bulky and expensive for industrial gas separation. Forming MOF layers on porous polymer supports is industrially attractive but technically challenging. Two features to overcome these problems are described: 1) a metal chelating support polymer to bind the MOF layer, and 2) control of MOF crystal growth by contra‐diffusion, aiming at a very thin nanocrystalline MOF layer. Using a metal chelating poly‐thiosemicarbazide (PTSC) support and adjusting the metal and organic ligand concentrations carefully, a very compact ZIF‐8 (ZIF=zeolitic imidazolate framework) layer was produced that displayed interference colors because of its smooth surface and extreme thinness—within the range of visible light. High performances were measured in terms of hydrogen/propane (8350) and propylene/propane (150) selectivity.     

Functional porous organic polymers for heterogeneous catalysis

Porous organic polymers (POPs), a class of highly crosslinked amorphous polymers possessing nano-pores, have recently emerged as a versatile platform for the deployment of catalysts. The bottom-up approach for porous organic polymer synthesis provides the opportunity for the design of polymer frameworks with various functionalities, for their use as catalysts or ligands. This tutorial review focuses on the framework structures and functionalities of catalytic POPs. Their structural design, functional framework synthesis and catalytic reactions are discussed along with some of the challenges.     

Influence of organic bases on constructing 3D photoluminescent open metal-organic polymeric frameworks

Four three-dimensional non-interpenetrating open coordination frameworks constructed from the CTC ligand (CTC =cis,cis-1,3,5-cyclohexanetricarboxylate) coordinated to metal ions (Mn(II) and Cd(II)): Mn(3)(CTC)(2)(DMF)(2)(1); Cd(3)(CTC)(2)(H(2)O)(3).H(2)O (2); Cd(3)(CTC)(2)(4,4'-bpy)(2)(EG)(2)(3); Cd(3)(CTC)(2)(mu(2)-hmt)(DMF)(C(2)H(5)OH)(H(2)O).2H(2)O (4)(DMF = dimethylformamide and EG = ethylene glycol) have been synthesized by slow evaporation of DMF-C(2)H(5)OH-H(2)O solutions of M(II)(Mn(II) or Cd(II)) and CTC in the presence of the organic bases TEA (triethylamine), TEA, 4,4'-bpy (4,4'-bipyridine) and hmt (hexamethylenetetramine), respectively, and structurally characterized by X-ray crystallography. The polymer constructed by CTC and Mn(II) exhibits a 3-D architecture with 5 x 9 A channels; the polymer formed by CTC and Cd(II) exists a 3-D extended framework with 9 x 9 A channels; wave-like sheet subunits of the polymer are upheld by 4,4'-bpy ligands resulting in a 3-D framework with 4 x 10 A channels; two-fold alternate sheet subunits of the polymer are interlinked by mu(2)-hmt ligands to form a novel 3-D architecture with 7 x 8 A channels. Polymers exhibit their strongest excitation peaks at 391, 390 and 394 nm, respectively, and their main strong emission peaks are at 543, 460 (with a shoulder peak at about 570 nm) and 557 nm, respectively.     

Organic Polymer-Silica Gel Hybrid: A Precursor of Highly Porous Silica Gel

In this article I describe two of our discoveries. The first is the preparation of a transparent solid material composed of an organic polymer and silica gel. A novel material called a “hybrid” has successfully been prepared by the sol-gel reaction of ethyl orthosilicate in the presence of an organic polymer consisting of repeating units having an N-alkylamide group. The molecular-level dispersion of the organic polymer in the framework of silica gel has been established, which is due to the hydrogen-bond interaction between the organic polymer and silanol group of silica gel. The second discovery is the preparation of porous silica gel, which has been achieved by calcination of the organic polymer-silica gel hybrid at 600°C. Pore sizes ranging from 10 to 20 Å have been attained. A method of controlling pore size has been proposed.     

Anisotropically Swelling Gels Attained through Axis‐Dependent Crosslinking of MOF Crystals

Anisotropically deforming objects have attracted considerable interest for use in molecular machines and artificial muscles. Herein, we focus on a new approach based on the crystal crosslinking of organic ligands in a pillared‐layer metal–organic framework (PLMOF). The approach involves the transformation from crosslinked PLMOF to polymer gels through hydrolysis of the coordination bonds between the organic ligands and metal ions, giving a network polymer that exhibits anisotropic swelling. The anisotropic monomer arrangement in the PLMOF underwent axis‐dependent crosslinking to yield anisotropically swelling gels. Therefore, the crystal crosslinking of MOFs should be a useful method for creating actuators with designable deformation properties.     

An effective Cu(II) quenching fluorescence sensor in aqueous solution and 1D chain coordination polymer framework

In the article, a novel fluorescent probe for the copper cation based on fluorescence quenching mechanism was designed. It exhibited high selectivity for Cu(II) over other common metal ions in aqueous media. Furthermore the coordination between Cu(II) and the organic molecule sensor fabricated an interesting 1D chain coordination polymer framework.     

Dynamic coordination polymers with 4,4'-oxybis(benzoate): reversible transformations of nano- and nonporous coordination frameworks responding to present solvents

Reversible construction of a nanoporous framework from a nonporous framework has been found in the zinc(II) coordination polymer with 4,4'-oxybis(benzoate) (oba). [Zn(2)(oba)(2)(dmf)(2)].2DMF (1), which has 1 nm scale channels, transforms to the nonporous coordination polymer [Zn(oba)(H(2)O)] (2) with the loss of the open framework. Compound 2 on treatment with DMF reversibly yields nanoporous compound 1.