Effect of organic additives on characterization of electrodeposited Co-W thin films

Co-W thin films were electrodeposited from aqueous bath with different organic additives. Electrochemical analysis showed that the transient state was limited and polarization behaviors were more evident during Co-W electrodeposition in the presence of organic additives. SEM measurement indicated that the surface morphology was affected by the nature of the organic additives to a large extent. Homogeneous Co-W thin films were obtained from the solutions containing ethyl methacrylate. Moreover, it was obvious that the presence of organic additives, in the electroplating bath, modified the structure and magnetic properties of the Co-W thin films according to the XRD and VSM measurements.     

Anisotropy of the optical and magneto-optical response of Au/Co/Au/Cu multilayers grown on vicinal Si (111) surfaces

The optical and magneto-optical second harmonic reflectivity response of Au/Co/Au/Cu multilayers grown on vicinal Si (111) substrates has been studied. These azimuthal optical non-linear experiments check the uniaxial character of the crystallinity of the Au buffer layer and the magnetic behavior of the ultrathin Co films in the metallic multilayer. They clearly show the strong dependence of the growth parameters and the misorientation of the vicinal surface on the SHG reflectivity signals. This uniaxial behavior is also correlated to linear MOKE experiments on the magnetic anisotropy with an easy magnetization axis parallel to the step edges. Received: 16 October 2001 / Published online: 29 May 2002     

Magnetic and magneto-optical properties of Co/Nb-codoped TiO2 films deposited by gas flow sputtering

Titanium dioxide thin films codoped with Co and Nb (Co/Nb-codoped TiO₂ films) were fabricated by a low-energy deposition process, gas flow sputtering. No metallic Co or Nb phase was detected by X-ray diffraction and X-ray photoelectron spectroscopy, suggesting that the Co and Nb ions have the oxidation states 2+ and 5+, respectively. The films show a relatively large Faraday rotation and magnetic circular dichroism on the order of 10³ deg/cm.     

Influence of complexing agent on the electrodeposited Co-Pt-W magnetic thin films

Complexing agents are often used to improve the quality of electrodeposited alloys. Influence of different complexing agents with hydroxycarboxylic acid group on the electrodeposited Co-Pt-W thin films has been investigated. Cathodic polarization curves show that the polarization behaviors of electroplating bath with different complexing agents are very different. Surface morphology, phase composition and magnetic properties are observed by means of FESEM, XRD and vibrating sample magnetometer (VSM), respectively. It has been found out that, if citrate was used as complexing agent, the Co-Pt-W thin films were homogeneous and the granular crystals with the average grain size of 2 μm have been observed. Co-Pt-W thin films exhibited hexagonal close packed (hcp) lattice and strong perpendicular anisotropic magnetic behavior (H_c⊥ = 215.5 kA/m; H_c∥ = 55.4 kA/m). In the presence of gluconate, needle-like deposits were obtained and a strong face centered cubic (fcc(1 1 1)) texture was measured. The Co-Pt-W thin films showed isotropic magnetic behavior. In the case of tartate and malate, the coexistence of needle-like deposits and cellular deposits appeared. The XRD patterns showed that the mixed fcc and hcp phase formed. Perpendicular anisotropic magnetic behaviors of thin films, from malate or tartate baths, were not obvious.     

Enhanced magneto-optical Kerr effects in nanocrystalline Sc-doped CoFe2O4 thin films

Nanocrystalline CoFe_2−xSc_xO₄ (x=0-0.4) thin films were prepared on silicon substrates at reduced temperature by a sol-gel process, and the doping effects of scandium on the microstructure, magnetism and polar magneto-optical Kerr effects of the as-deposited films were examined. It was shown that the intensities of both of the Kerr rotation peaks increase with the doping content x of Sc³⁺. The increase for the peak at 540 nm is due to the decrease of the electrostatic polarization of O²⁻ resulting from the relatively large radius of Sc³⁺, and that for the peak at 620 nm was a result of the migration of Co²⁺ from octahedral to tetrahedral sites in the presence of the dopant of Sc³⁺.     

Influences of the interfacial state between Co and a Si substrate on the magnetic properties of Co/Si(1 1 1) films

Morphology and magnetic properties of Co/Si(1 1 1) interfaces have been investigated using scanning tunneling microscope and surface magneto-optic Kerr effect techniques. As deposited at room temperature for Co/Si(1 1 1), defects have been observed with shapes of dark patches and bright islands on the surface with different Co coverage. The defect formation causes a rough interface. For subsequently deposited Co layers, the interfacial state between Co and the Si substrate results in the appearance of both the longitudinal and polar Kerr loops. After annealing treatments, interdiffusion of Co atoms and Si(1 1 1) substrate occurs as revealed by Auger electron spectroscopy. Scanning tunneling microscope images show the formation of Si clusters with average diameter of 10 nm at high temperatures. The disappearance of ferromagnetism of the films occurs due to the structural and compositional changes.     

Annealing induced microstructural evolution of electrodeposited electrochromic tungsten oxide films

A significant influence of microstructure on the electrochromic and electrochemical performance characteristics of tungsten oxide (WO₃) films potentiostatically electrodeposited from a peroxopolytungstic acid (PPTA) sol has been evaluated as a function of annealing temperature. Powerful probes like X-ray diffractometry (XRD), transmission electron microscopy (TEM), UV-vis spectrophotometry, multiple step chronoamperometry and cyclic voltammetry have been employed for the thin film characterization. The as-deposited and the film annealed at 60 °C are composed of nanosized grains with a dominant amorphous phase, as well as open structure which ensues from a nanoporous matrix. This ensures a greater number of electroactive sites and a higher reaction area thereby manifesting in electrochromic responses superior to that of the films annealed at higher temperatures. The films annealed at temperatures ≥250 °C are characterized by a prominent triclinic crystalline structure and a hexagonal phase co-exists at temperatures ≥400 °C. The deleterious effect on the electrochromic properties of the film with annealing is ascribed to the loss of porosity, densification and the increasing crystallinity and grain size. Amongst all films under investigation, the film annealed at 60 °C exhibits a high transmission modulation (ΔT ∼ 68%) and coloration efficiency (η ∼ 77.6 cm² C⁻¹) at λ = 632.8 nm, charge storage capacity (Q_ins ∼ 21 mC cm⁻²), diffusion coefficient (6.08 × 10⁻¹⁰ cm² s⁻¹), fast color-bleach kinetics (t_c ∼ 275 s and t_b ∼ 12.5 s) and good electrochemical activity, as well as reversibility for the lithium insertion-extraction process upon cycling. The remarkable potential, which the film annealed at 60 °C has, for practical “smart window” applications has been demonstrated.     

Buffer effects of Ag layers on magneto-optical Co/Ge(1 0 0) ultrathin films

Magnetic properties of the Co/Ag/Ge(1 0 0) films grown at room temperature and 200 K were studied by the surface magneto-optical Kerr effect (SMOKE). More than 1.5 monolayer Ag buffer layers not only effectively block the interdiffusion between the capped Co layers and the Ge(1 0 0) substrate but also stabilize the magnetic phase. The temperature and thickness dependence on coercivity measurements show that interactions upon the interfaces are strongly correlated to the microstructures.     

Pulsed laser deposition and characterization of multilayer metal-carbon thin films

Cobalt-DLC multilayer films were deposited with increasing content of cobalt, keeping carbon content constant by pulsed laser deposition technique. A cobalt free carbon film was also deposited for comparison. Excimer laser was employed to ablate the materials onto silicon substrate, kept at 250 °C, while post-deposition annealing at 400 °C was also performed in situ. The formation of cobalt grains within the carbon matrix in Co-DLC films can be seen through scanning electron and atomic force micrographs while no grains on the surface of the cobalt-free DLC film were observed. Raman spectra of all the films show D- and G-bands, which is a confirmation that the films are DLC in nature. According to Vibrating sample magnetometer (VSM) measurements, the DLC films with cobalt revealed ferromagnetic behaviour whereas the cobalt free DLC film exhibited diamagnetic behaviour. The pure DLC film also shows ferromagnetic nature when diamagnetic background is subtracted. Spectroscopic Ellipsometry (SE) analysis showed that the optical band gaps, refractive indices and extinction coefficients of Co-DLC films can be effectively tuned with increasing content of cobalt.     

Nonlinear magneto-optical probing of magnetic interfaces

Received: 16 October 1998     

Magnetization-induced second-harmonic generation enhanced by surface plasmons in ultrathin Au/Co/Au metallic films

(2ω) to be distinguished. Received: 20 September 1998     

GMR in multilayered nanowires electrodeposited in track-etched polyester and polycarbonate membranes

Commercially available track-etched polyester membranes were used as templates to electrodeposit Co–Ni–Cu/Cu multilayered nanowires, giving room-temperature current perpendicular to plane (CPP) giant magnetoresistance (GMR) values of up to ∼12%. In contrast to similar nanowires electrodeposited in track-etched polycarbonate membranes, the GMR obtained in multilayered nanowires electrodeposited in the polyester membranes increased with decreasing Cu-layer thickness t_Cu, for t_Cu in the 2–7 nm range, indicating a lack of ferromagnetic coupling through pinholes, etc. Transmission electron micrographs showed clear evidence for smooth, parallel layer interfaces in the nanowires.     

Polar and longitudinal magnetooptical Kerr effects in magnetic film/spacer/magnetic substrate system

The paper deals with the electromagnetic theory of longitudinal and normal incidence polar magnetooptical Kerr effects (MOKE) in sandwich structures consisting of a magnetic film on a thick magnetic substrate separated by a nonmagnetic spacer. These structures are employed in fundamental studies of magnetic exchange coupling, tunnel magnetoresistance, spin polarized current,etc., as well as in the design of the magnetoelectronic devices,e.g., magnetic random access memories. The results are expressed in terms of the Jones reflection matrix. This makes the analysis of the observed MOKE in various experimental set-ups easier. To first order in off-diagonal elements of the permittivity tensor, the analytical expressions approximate the results obtained using rigorous matrix formalisms with a little loss in accuracy, provided the magnetooptical effects quadratic in the offdiagonal elements are negligible. The total MOKE is expressed as a a sum of components originating from magnetic film and magnetic substrate, respectively. The components enter the analytical expressions with different phases and may be identified separately by a proper control of the polarization state and photon energy of the incident radiation, angle of incidence, nonmagnetic spacer thickness, and radiation wavelength. The formulae are derived without any restriction on the magnetic film thickness. However, for a rapid evaluation of the trends the MOKE response is also treated under the assumption that the thickness of the magnetic film is much smaller than the radiation wavelength. This work has been partially supported by Grant Agency of the Czech Republic (#202/97/1180 and #202/00/0761), Barrande Project and Grant Agency of Charles University.     

Fabrication and magnetic properties of Ce1Y2Fe5O12 thin films on GGG and SiO2/Si substrates

Microstructure and magnetic properties of crystalline Ce₁Y₂Fe₅O₁₂ thin films prepared on GGG and on SiO₂/Si substrates by pulsed laser deposition were studied. The results show that highly textured Ce₁Y₂Fe₅O₁₂ film with (4 4 4) preferred orientation prepared on GGG (1 1 1) shows strong paramagnetism superimposed by a weak ferromagnetism. However, polycrystalline Ce₁Y₂Fe₅O₁₂ thin films on SiO₂/Si, which can only be obtained after post-annealing, show strong ferromagnetism with easy axis of magnetization lying in the plane of the film. With post-annealing temperature increasing, CeO₂ segregates from Ce₁Y₂Fe₅O₁₂; then YIG continues to be decomposed, forming Fe₂O₃. Consequently, the saturation magnetization of Ce₁Y₂Fe₅O₁₂ films decreases first and then increases correspondingly, which indicates that the magnetic properties of Ce₁Y₂Fe₅O₁₂ films are mainly related to the microstructure.     

Study of Co thin films deposited on low-index Cu surfaces by photoemission electron microscopy

The domain structures of Co ultrathin film prepared with μm- and mm-dimension laterally were acquired and compared using X-ray Photoemission Electron Microscope (PEEM). Through depositing the Co film with different thickness on two copper single-crystal surfaces; Cu(1 0 0) and Cu(1 1 0), we report the impacts of thin film lateral dimensions, crystal orientations, and film thickness to the domain structures of Co layer.     

The pH and current density dependence of DC electrodeposited CoCu thin films

CoCu thin films were fabricated on a nanocrystalline substrate by DC electrodeposition. It is found that the composition, structure and magnetic properties of the thin films exhibit a strong dependence on the current density and pH values of the bath electrolyte. The effect of annealing as well as the structure–property relation was investigated.     

Magnetic layer thickness dependence of magnetization reversal in electrodeposited CoNi/Cu multilayer nanowires

The magnetization reversal of electrodeposited CoNi/Cu multilayer nanowires patterned in an array using a hole template has been investigated. The reversal mode is found to depend on the CoNi layer thickness t(CoNi); with increasing t(CoNi) a transition occurs from coherent rotation to a combination of coherent and incoherent rotation at around t(CoNi)=51 nm. The reversal mode has been identified using the magnetic hysteresis loops measured at room temperature for CoNi/Cu nanowires placed at various angles between the directions of the nanowire axis and external fields using a vibrating sample magnetometer. The nanowire samples have a diameter of ∼250 nm and constant Cu layer thickness of 4.2 nm with various t(CoNi) ranging from 6.8 nm to 7.5 μm. With increasing t(CoNi), the magnetic easy axis moves from the direction perpendicular to nanowires to that parallel to the nanowires at around t(CoNi)=51 nm, indicating a change in the magnetization reversal mode. The reversal mode for the nanowires with thin disk-shaped CoNi layers (t(CoNi)=6.8, 12 and 17 nm) is of a coherent rotation type, while that for long rod-shaped CoNi layers (t(CoNi)=150 nm, 1.0, 2.5 and 7.5 μm) can be consistently explained by a combination of coherent rotation and a curling mode. The effects of dipole–dipole interactions between nanowires and between adjacent magnetic layers in each nanowire on the reversal process have been discussed.     

Direct observation of room temperature magnetism in (In,Mn)As thin films by magnetic force microscopy

Variable-temperature magnetic force microscopy (MFM) has been performed over the temperature range of 298-348 K on ferromagnetic (In,Mn)As thin films deposited by metal-organic vapor phase epitaxy (MOVPE). Ferromagnetic domains were observed with submicron resolution in both single and two phase (In,Mn)As films, persisting up to 328 K. Isolated cylindrical domains ranging from 100 to 350 nm in diameter with densities of 2-5 × 10⁸ cm⁻² were observed in phase pure films. Longer range magnetic order, in the form of ribbon-like domains up to 1 μm in length, are present in the regions between the cylindrical domains. Two phase (In,Mn)As films produced a well-resolved complex domain structure consisting of 180° parallel and antiparallel domains. Excellent agreement between the temperature dependence of the relative magnetization obtained by MFM and superconducting quantum interference device measurements was observed.     

Characterization of a thin CeO2-ZrO2-Y2O3 films electrochemical deposited on stainless steel

In this paper, we report for the first time formation of a thin CeO₂-ZrO₂-Y₂O₃ films electrodeposited on a stainless steel substrate. The samples have been characterized by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The XRD and XPS data indicate formation of a solid solution and additional existence of Ce³⁺ states near the surface. After annealing, SEM examination has shown a microstructure formed by dispersed spherical agglomerates having a size between 20 and 60 nm.     

Abnormal reduction of coercivity on magnetic cobalt–platinum alloy films

Ultrathin Co–Pt alloy films as substrate were studied by the surface magneto-optical Kerr effect. As the growth of Ni, the films show uniquely high polar Kerr responses without any in-plane signals. The coercivity decreased until the thickness of Ni film was higher than 5 ML. A new surface structure was discovered at 7–10 ML Ni/Co–Pt films by the low-energy electron diffraction. Interestingly, polar Kerr signal and coercivity of the 10 ML Ni/Co–Pt(1 1 1) template film reduced rapidly as Co films were further deposited onto only about 1–2 ML. Then the films show a canted magnetization with a rollback hysteresis in the polar configuration during the growth of Co. Coercivity of the 7 ML Co/Ni/Co–Pt film was found unusually down to almost 100 Oe.The corresponding magic number at around 7 ML of Co in the abnormal reduction of coercivity may be attributed to the cluster formations of Co.