Reflected shock tube studies of high-temperature rate constants for OH + CH4 --> CH3 + H2O and CH3 + NO2 --> CH3O + NO

The reflected shock tube technique with multipass absorption spectrometric detection of OH radicals at 308 nm has been used to study the reactions OH + CH(4) --> CH(3) + H(2)O and CH(3) + NO(2) --> CH(3)O + NO. Over the temperature range 840-2025 K, the rate constants for the first reaction can be represented by the Arrhenius expression k = (9.52 +/- 1.62) x 10(-11) exp[(-4134 +/- 222 K)/T] cm(3) molecule(-1) s(-1). Since this reaction is important in both combustion and atmospheric chemistry, there have been many prior investigations with a variety of techniques. The present results extend the temperature range by 500 K and have been combined with the most accurate earlier studies to derive an evaluation over the extended temperature range 195-2025 K. A three-parameter expression describes the rate behavior over this temperature range, k = (1.66 x 10(-18))T(2.182) exp[(-1231 K)/T] cm(3) molecule(-1) s(-1). Previous theoretical studies are discussed, and the present evaluation is compared to earlier theoretical estimates. Since CH(3) radicals are a product of the reaction and could cause secondary perturbations in rate constant determinations, the second reaction was studied by OH radical production from the fast reactions CH(3)O --> CH(2)O + H and H + NO(2) --> OH + NO. The measured rate constant is 2.26 x 10(-11) cm(3) molecule(-1) s(-1) and is not dependent on temperature from 233 to 1700 K within experimental error.     

Reflected shock tube studies of high-temperature rate constants for OH + C2H2 and OH + C2H4

The reflected shock tube technique with multi-pass absorption spectrometric detection of OH-radicals at 308 nm (corresponding to a total path length of approximately 4.9 m) has been used to study the reactions, OH + C(2)H(2)--> products (1) and OH + C(2)H(4)--> C(2)H(3) + H(2)O (2). The present optical configuration gives a S/N ratio of approximately 1 at approximately 0.5-1.0 x 10(12) radicals cm(-3). Hence, kinetics experiments could be performed at [OH](0) = approximately 4-20 ppm thereby minimizing secondary reactions. OH was produced rapidly from the dissociations of either CH(3)OH or NH(2)OH (hydroxylamine). A mechanism was then used to obtain profile fits that agreed with the experiment to within <+/-5%. The derived Arrhenius expressions, in units of cm(3) molecule(-1) s(-1) are: k(1) = (1.03 +/- 0.24) x 10(-10) exp(-7212 +/- 417 K/T) for 1509-2362 K and k(2) = (10.2 +/- 5.8) x 10(-10) exp(-7411 +/- 871 K/T) for 1463-1931 K. The present study is the first ever direct measurement for reaction (1) at temperatures >1275 K while the present results extend the temperature range for (2) by approximately 700 K. These values are compared with earlier determinations and with recent theoretical calculations. The calculations agree with the present data for both reactions to within +/-10% over the entire T-range.     

Reflected shock tube studies of high-temperature rate constants for OH + NO2 --> HO2 + NO and OH + HO2 --> H2O + O2

The motivation for the present study comes from the preceding paper where it is suggested that accepted rate constants for OH + NO2 --> NO + HO2 are high by approximately 2. This conclusion was based on a reevaluation of heats of formation for HO2, OH, NO, and NO2 using the Active Thermochemical Table (ATcT) approach. The present experiments were performed in C2H5I/NO2 mixtures, using the reflected shock tube technique and OH-radical electronic absorption detection (at 308 nm) and using a multipass optical system. Time-dependent profile decays were fitted with a 23-step mechanism, but only OH + NO2, OH + HO2, both HO2 and NO2 dissociations, and the atom molecule reactions, O + NO2 and O + C2H4, contributed to the decay profile. Since all of the reactions except the first two are known with good accuracy, the profiles were fitted by varying only OH + NO2 and OH + HO2. The new ATcT approach was used to evaluate equilibrium constants so that back reactions were accurately taken into account. The combined rate constant from the present work and earlier work by Glaenzer and Troe (GT) is k(OH+NO2) = 2.25 x 10(-11) exp(-3831 K/T) cm3 molecule(-1) s(-1), which is a factor of 2 lower than the extrapolated direct value from Howard but agrees well with NO + HO2 --> OH + NO2 transformed with the updated equilibrium constants. Also, the rate constant for OH + HO2 suitable for combustion modeling applications over the T range (1200-1700 K) is (5 +/- 3) x 10(-11) cm3 molecule(-1) s(-1). Finally, simulating previous experimental results of GT using our updated mechanism, we suggest a constant rate for k(HO2+NO2) = (2.2 +/- 0.7) x 10(-11) cm3 molecule(-1) s(-1) over the T range 1350-1760 K.     

Reflected shock tube and theoretical studies of high-temperature rate constants for OH+CF3H<-->CF3+H2O and CF3+OH-->products

The reflected shock tube technique with multipass absorption spectrometric detection of OH radicals at 308 nm, using either 36 or 60 optical passes corresponding to total path lengths of 3.25 or 5.25 m, respectively, has been used to study the bimolecular reactions, OH+CF3H-->CF3+H2O (1) and CF3+H2O-->OH+CF3H (-1), between 995 and 1663 K. During the course of the study, estimates of rate constants for CF3+OH-->products (2) could also be determined. Experiments on reaction -1 were transformed through equilibrium constants to k1, giving the Arrhenius expression k1=(9.7+/-2.1)x10(-12) exp(-4398+/-275K/T) cm3 molecule(-1) s(-1). Over the temperature range, 1318-1663 K, the results for reaction 2 were constant at k2=(1.5+/-0.4)x10(-11) cm3 molecule(-1) s(-1). Reactions 1 and -1 were also studied with variational transition state theory (VTST) employing QCISD(T) properties for the transition state. These a priori VTST predictions were in good agreement with the present experimental results but were too low at the lower temperatures of earlier experiments, suggesting that either the barrier height was overestimated by about 1.3 kcal/mol or that the effect of tunneling was greatly underestimated. The present experimental results have been combined with the most accurate earlier studies to derive an evaluation over the extended temperature range of 252-1663 K. The three parameter expression k1=2.08x10(-17) T1.5513 exp(-1848 K/T) cm3 molecule(-1) s(-1) describes the rate behavior over this temperature range. Alternatively, the expression k1,th=1.78x10(-23) T3.406 exp(-837 K/T) cm3 molecule(-1) s(-1) obtained from empirically adjusted VTST calculations over the 250-2250 K range agrees with the experimental evaluation to within a factor of 1.6. Reaction 2 was also studied with direct CASPT2 variable reaction coordinate transition state theory. The resulting predictions for the capture rate are found to be in good agreement with the mean of the experimental results and can be represented by the expression k2,th=2.42x10(-11) T-0.0650 exp(134 K/T) cm3 molecule(-1) s(-1) over the 200-2500 K temperature range. The products of this reaction are predicted to be CF2O+HF.     

High-temperature rate constants for CH3OH + Kr --> products, OH + CH3OH --> products, OH + (CH3)(2)CO --> CH2COCH3 + H2O, and OH + CH3 --> CH) + H2O

The reflected shock tube technique with multipass absorption spectrometric detection of OH radicals at 308 nm (corresponding to a total path length of approximately 4.9 m) has been used to study the dissociation of methanol between 1591 and 2865 K. Rate constants for two product channels [CH3OH + Kr --> CH3 + OH + Kr (1) and CH3OH + Kr --> 1CH2 + H2O + Kr (2)] were determined. During the course of the study, it was necessary to determine several other rate constants that contributed to the profile fits. These include OH + CH3OH --> products, OH + (CH3)2CO --> CH2COCH3 + H2O, and OH + CH3 --> 1,3CH2 + H2O. The derived expressions, in units of cm(3) molecule(-1) s(-1), are k(1) = 9.33 x 10(-9) exp(-30857 K/T) for 1591-2287 K, k(2) = 3.27 x 10(-10) exp(-25946 K/T) for 1734-2287 K, kOH+CH3OH = 2.96 x 10-16T1.4434 exp(-57 K/T) for 210-1710 K, k(OH+(CH3)(2)CO) = (7.3 +/- 0.7) x 10(-12) for 1178-1299 K and k(OH+CH3) = (1.3 +/- 0.2) x 10(-11) for 1000-1200 K. With these values along with other well-established rate constants, a mechanism was used to obtain profile fits that agreed with experiment to within <+/-10%. The values obtained for reactions 1 and 2 are compared with earlier determinations and also with new theoretical calculations that are presented in the preceding article in this issue. These new calculations are in good agreement with the present data for both (1) and (2) and also for OH + CH3 --> products.     

Absolute rate constants for F + CH3CHO and CH3CO + O2, relative rate study of CH3CO + NO,and the product distribution of the F + CH3CHO reaction

Using a pulse-radiolysis transient UV–VIS absorption system, rate constants for the reactions of F atoms with CH₃CHO (1) and CH₃CO radicals with O₂ (2) and NO (3) at 295 K and 1000 mbar total pressure of SF₆ was determined to be k₁=(1.4±0.2)×10⁻¹⁰, k₂=(4.4±0.7)×10⁻¹², and k₃=(2.4±0.7)×10⁻¹¹ cm³ molecule⁻¹ s⁻¹. By monitoring the formation of CH₃C(O)O₂ radicals (λ>250nm) and NO₂ (λ=400.5nm) following radiolysis of SF₆/CH₃CHO/O₂ and SF₆/CH₃CHO/O₂/NO mixtures, respectively, it was deduced that reaction of F atoms with CH₃CHO gives (65±9)% CH₃CO and (35±9)% HC(O)CH₂ radicals. Finally, the data obtained here suggest that decomposition of HC(O)CH₂O radicals via C C bond scission occurs at a rate of <4.7×10⁵ s⁻¹. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 913–921, 1998     

A shock tube study of the OH + OH → H2O + O reaction

The rate coefficient for the reaction has been determined in mixtures of nitric acid (HNO₃) and argon in incident shock wave experiments. Quantitative OH time-histories were obtained by cw narrow-linewidth uv laser absorption of the R₁(5) line of the A² σ⁺ ← X² Π_i (0,0) transition at 32606.56 cm^?1 (vacuum). The experiments were conducted over the temperature range 1050–2380 K and the pressure range 0.18–0.60 atm. The second-order rate coefficient was determined to be with overall uncertainties of +11%, ?16% at high temperatures and +25%, ?22% at low temperatures. By incorporating data from previous investigations in the temperature range 298–578 K, the following expression is determined for the temperature range 298–2380 K © 1994 John Wiley & Sons, Inc.     

Ab initio rate constants from hyperspherical quantum scattering: application to H+C2H6 and H+CH3OH

The dynamics and kinetics of the abstraction reactions of H atoms with ethane and methanol have been studied using a quantum mechanical procedure. Bonds being broken and formed are treated with explicit hyperspherical quantum dynamics. The ab initio potential energy surfaces for these reactions have been developed from a minimal number of grid points (average of 48 points) and are given by analytical functionals. All the degrees of freedom except the breaking and forming bonds are optimized using the second order perturbation theory method with a correlation consistent polarized valence triple zeta basis set. Single point energies are calculated on the optimized geometries with the coupled cluster theory and the same basis set. The reaction of H with C2H6 is endothermic by 1.5 kcal/mol and has a vibrationally adiabatic barrier of 12 kcal/mol. The reaction of H with CH3OH presents two reactive channels: the methoxy and the hydroxymethyl channels. The former is endothermic by 0.24 kcal/mol and has a vibrationally adiabatic barrier of 13.29 kcal/mol, the latter reaction is exothermic by 7.87 kcal/mol and has a vibrationally adiabatic barrier of 8.56 kcal/mol. We report state-to-state and state-selected cross sections together with state-to-state rate constants for the title reactions. Thermal rate constants for these reactions exhibit large quantum tunneling effects when compared to conventional transition state theory results. For H+CH3OH, it is found that the CH2OH product is the dominant channel, and that the CH3O channel contributes just 2% at 500 K. For both reactions, rate constants are in good agreement with some measurements.     

Secondary kinetics of methanol decomposition: theoretical rate coefficients for 3CH2 + OH, 3CH2 + 3CH2, and 3CH2 + CH3

Direct variable reaction coordinate transition state theory (VRC-TST) rate coefficients are reported for the (3)CH(2) + OH, (3)CH(2) + (3)CH(2), and (3)CH(2) + CH(3) barrierless association reactions. The predicted rate coefficient for the (3)CH(2) + OH reaction (approximately 1.2 x 10(-10) cm(3) molecule(-1) s(-1) for 300-2500 K) is 4-5 times larger than previous estimates, indicating that this reaction may be an important sink for OH in many combustion systems. The predicted rate coefficients for the (3)CH(2) + CH(3) and (3)CH(2) + (3)CH(2) reactions are found to be in good agreement with the range of available experimental measurements. Product branching in the self-reaction of methylene is discussed, and the C(2)H(2) + 2H and C(2)H(2) + H2 products are predicted in a ratio of 4:1. The effect of the present set of rate coefficients on modeling the secondary kinetics of methanol decomposition is briefly considered. Finally, the present set of rate coefficients, along with previous VRC-TST determinations of the rate coefficients for the self-reactions of CH(3) and OH and for the CH(3) + OH reaction, are used to test the geometric mean rule for the CH(3), (3)CH(2), and OH fragments. The geometric mean rule is found to predict the cross-combination rate coefficients for the (3)CH(2) + OH and (3)CH(2) + CH(3) reactions to better than 20%, with a larger (up to 50%) error for the CH(3) + OH reaction.     

Quantum mechanical rate constants for H + O2 <--> O + OH and H + O2 --> HO2 reactions

Canonical rate constants for both the forward and reverse H + O(2) <--> O + OH reactions were calculated using a quantum wave packet-based statistical model on the DMBE IV potential energy surface of Varandas and co-workers. For these bimolecular reactions, the results show reasonably good agreement with available experimental and theoretical data up to 1500 K. In addition, the capture rate for the H + O(2) --> HO(2) addition reaction at the high-pressure limit was obtained on the same potential using a time-independent quantum capture method. Excellent agreement with experimental and quasi-classical trajectory results was obtained except for at very low temperatures, where a reaction threshold was found and attributed to the centrifugal barrier of the orbital motion.     

A comprehensive kinetic mechanism for CO,CH2O,and CH3OH combustion

New experimental profiles of stable species concentrations are reported for formaldehyde oxidation in a variable pressure flow reactor at initial temperatures of 850–950 K and at constant pressures ranging from 1.5 to 6.0 atm. These data, along with other data published in the literature and a previous comprehensive chemical kinetic model for methanol oxidation, are used to hierarchically develop an updated mechanism for CO/H₂O/H₂/O₂, CH₂O, and CH₃OH oxidation. Important modifications include recent revisions for the hydrogen–oxygen submechanism (Li et al., Int J Chem Kinet 2004, 36, 565), an updated submechanism for methanol reactions, and kinetic and thermochemical parameter modifications based upon recently published information. New rate constant correlations are recommended for CO + OH = CO₂ + H ( R23 ) and HCO + M = H + CO + M ( R24 ), motivated by a new identification of the temperatures over which these rate constants most affect laminar flame speed predictions (Zhao et al., Int J Chem Kinet 2005, 37, 282). The new weighted least‐squares fit of literature experimental data for ( R23 ) yields k₂₃ = 2.23 × 10⁵T^1.89exp(583/T) cm³/mol/s and reflects significantly lower rate constant values at low and intermediate temperatures in comparison to another recently recommended correlation and theoretical predictions. The weighted least‐squares fit of literature results for ( R24 ) yields k₂₄ = 4.75 × 10¹¹T^0.66exp(?7485/T) cm³/mol/s, which predicts values within uncertainties of both prior and new (Friedrichs et al., Phys Chem Chem Phys 2002, 4, 5778; DeSain et al., Chem Phys Lett 2001, 347, 79) measurements. Use of either of the data correlations reported in Friedrichs et al. (2002) and DeSain et al. (2001) for this reaction significantly degrades laminar flame speed predictions for oxygenated fuels as well as for other hydrocarbons. The present C₁/O₂ mechanism compares favorably against a wide range of experimental conditions for laminar premixed flame speed, shock tube ignition delay, and flow reactor species time history data at each level of hierarchical development. Very good agreement of the model predictions with all of the experimental measurements is demonstrated. © 2007 Wiley Periodicals, Inc. 39: 109–136, 2007     

Dependence of the rate constants on the treatment of internal rotation modes: the reaction OH + CH3SH --> CH3S + H2O as an example

The title reaction has been used as an example to test the importance of using a hindered rotor treatment instead of a harmonic oscillator model for calculating vibrational partition functions corresponding to low-frequency internal rotation modes. First, a normal-mode analysis according to the Ayala and Schlegel's algorithm has been used to identify the internal rotation modes of methanethiol and the transition state structure. Then, after calculation of the energy barrier for each internal rotation, the corresponding hindered rotor partition functions have been calculated following the CW scheme of Chuang and Truhlar. The results show that the anharmonic treatment produces a rather modest improvement of the rate constants at room temperature or below.     

A shock tube study of CO + OH → CO2 + H and HNCO + OH → products via simultaneous laser absorption measurements of OH and CO2

The rate coefficients for the reactions were determined using mixtures of HNO₃/CO/Ar and HNO₃/HNCO/Ar in incident shock wave experiments. Simultaneous OH and CO₂ absorption time-histories were obtained via cw uv narrow-linewidth absorption at 32606.56 cm⁻¹ (λ = 306.687 nm) and cw infrared narrow-linewidth absorption at 2380.72 cm⁻¹ (λ = 4.2004 μm), respectively. The measurements of k₁ determined from measured CO₂ time-histories are in good agreement with those determined from previous measurements of OH time-histories at this laboratory. The rate coefficient for the overall reaction of HNCO + OH → Products was determined from analysis of OH data traces. The uncertainty in k₂ was found to be +22% −16%. By incorporating data from a previous low-temperature study, the following empirical expression was determined for the bimolecular reaction: over the temperature range 620–1860 K. From analysis of CO₂ data traces, an upper limit on the branching fraction (α = k_2a/k₂) for reaction (2a) of 10% was found, independent of temperature over the range 1250–1860 K. © 1996 John Wiley & Sons, Inc.     

Bayesian uncertainty quantification of recent shock tube determinations of the rate coefficient of reaction H + O2→ OH + O

We analyze the ignition delay in hydrogen–oxygen combustion and the important chain ‐branching reaction H + O₂→ OH + O that occurs behind the shock waves in shock tube experiments. We apply a stochastic Bayesian approach to quantify uncertainties in the theoretical model and experimental data. The approach involves a statistical inverse problem, which has four “components” as input information: (a) model, (b) prior joint probability density function (PDF) of the uncertain parameters, (c) experimental data, and (d) uncertainties in the scenario parameters. The solution of this statistical inverse problem is a posterior joint PDF of the uncertain parameters from which we can easily extract statistical information. We first perform a parametric study to investigate how the level of the total uncertainty (which we define as the sum of model uncertainty and experimental uncertainty) affects the uncertainty in the rate coefficient k₁ of the reaction H + O₂→ OH + O, which is “most likely” expressed by k₁=1.73×10²³T^?2.5exp(?11550/T) cm³ mol^?1 s^?1 over the experimental temperature range 1100–1472 K. We also introduce the idea of “irreducible” uncertainty when considering other parameters in the system. After statistically calibrating the parameters modeling the rate coefficient k₁, we predict its 95% confidence interval (CI) for different temperature regimes and compare the CI against the values of k₁ obtained deterministically. Our results show that a small uncertainty in gas temperature (±5 K) introduces appreciable uncertainty in k₁. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 586–597, 2012     

Interaction energy and the shift in OH stretch frequency on hydrogen bonding for the H2O → H2O,CH3OH → H2O,and H2O → CH3OH dimers

The ability to use calculated OH frequencies to assign experimentally observed peaks in hydrogen bonded systems hinges on the accuracy of the calculation. Here we test the ability of several commonly employed model chemistries—HF, MP2, and several density functionals paired with the 6‐31+G(d) and 6‐311++G(d,p) basis sets—to calculate the interaction energy (D_e) and shift in OH stretch fundamental frequency on dimerization (δ(ν)) for the H₂O → H₂O, CH₃OH → H₂O, and H₂O → CH₃OH dimers (where for X → Y, X is the hydrogen bond donor and Y the acceptor). We quantify the error in D_e and δ(ν) by comparison to experiment and high level calculation and, using a simple model, evaluate how error in D_e propagates to δ(ν). We find that B3LYP and MPWB1K perform best of the density functional methods studied, that their accuracy in calculating δ(ν) is ≈ 30–50 cm^?1 and that correcting for error in D_e does little to heighten agreement between the calculated and experimental δ(ν). Accuracy of calculated δ(ν) is also shown to vary as a function of hydrogen bond donor: while the PBE and TPSS functionals perform best in the calculation of δ(ν) for the CH₃OH → H₂O dimer their performance is relatively poor in describing H₂O → H₂O and H₂O → CH₃OH. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

Kinetics and rate constants of the reaction CH2OH+O2-->CH2O+HO2 in the temperature range of 236-600 K

The kinetics and absolute rate constants of the gas-phase reaction of the hydroxymethyl radical (CH2OH) with molecular oxygen have been studied using laser photolysis/near-IR absorption spectroscopy. The reaction was tracked by monitoring the time-dependent changes in the production of the hydroperoxy radical (HO2) concentration. For sensitive detection of HO2, two-tone frequency modulation absorption spectroscopy was used in combination with a Herriott-type optical multipass absorption cell. Rate constants were determined as a function of temperature (236 K相似文献   

Freezing Point of Mixtures of H2 16O with H2 17O and Those of Aqueous CD3CH2OH and CH3 13CH2OH Solutions

The freezing point of mixtures of H₂ ¹⁶O with H₂ ¹⁷O was measured as a function of the molal concentration. The freezing points rose linearly with increasing molal concentration above that of pure ordinary water, H₂ ¹⁶O, at 273.15 K. This confirms Kiyosawa's previous conclusion [K. Kiyosawa, J. Solution Chem. 20, 583 (1991).], drawn from findings on changes in the freezing point of mixtures of H₂ ¹⁶O with H₂ ¹⁸O or D₂ ¹⁶O that even a difference in the number of neutrons in the hydrogen or oxygen atoms of water molecules makes them behave as different entities with respect to the colligative properties of solutions. This has been confirmed to also occur in mixtures of H₂ ¹⁶O with H₂ ¹⁷O.     

超临界CO2+CH3OH及C2H5OH二元系的气液平衡

在带有石英可视窗和内搅拌的可变体积高压釜内，测定了超临界CO2＋CH3OH及C2H5OH两个系统的相平衡数据，温度为50－200℃，压力4．0－16．0MPa，利用从硬球模型得出的适用于高压高温的状态方程，计算了这两个系统的临界曲线，并与实验值进行比较。     

Ab initio rate constants from hyperspherical quantum scattering: application to H + CH4 --> H2 + CH3

A general and practical procedure is described for calculating rate constants for chemical reactions using a minimal number of ab initio calculations and quantum-dynamical computations. The method exploits a smooth interpolating functional developed in the hyperspherical representation. This functional is built from two Morse functions and depends on a relatively small number of parameters with respect to conventional functionals developed to date. Thus only a small number of ab initio points needs to be computed. The method is applied to the H + CH4 --> H2 + CH3 reaction. The quantum scattering calculations are performed treating explicitly the bonds being broken and formed. All the degrees of freedom except the breaking and forming bonds are optimized ab initio and harmonic vibrational frequencies and zero-point energies for them are calculated at the MP2(full) level with a cc-pVTZ basis set. Single point energies are calculated at a higher level of theory with the same basis set, namely CCSD(T, full). We report state-to-state cross sections and thermal rate constants for the title reaction and make comparisons with previous results. The calculated rate constants are in good agreement with experiments.