Influence of preliminary UV irradiation on the thermal decomposition of copper hypophosphite

The effect of the influence of preliminary UV irradiation on the kinetics of the thermal decomposition of crystalline copper hypophosphite has been discovered, revealing a decrease in the induction period. Spectral dependence of the effect was determined by absorption of copper hypophosphite in the 255 nm charge transfer band. Comparison of the quantum efficiency of the disappearance of ions of bivalent copper 10^?1–10^?2 ions per quantum and the quantum output of hydrogen 10^?4–10^?5 mole per quantum as well as acid formation during photolysis shows that a proton (acid) as well as the univalent copper is the main primary product of photolysis. Formation of acid in the course of photolysis participating in the nucleation during the investigated topochemical process of thermal decomposition is the reason for the discovered effect.     

Electrical and optical properties of high-purity p-type single crystals of GeFe2O4

Single crystals of the spinel GeFe₂O₄, grown by the chemical vapor transport technique, are p-type semiconductors with an acceptor ionization energy of 0.39 eV. The material is a heavily compensated band-type semiconductor, with a typical hole concentration of 10¹⁴ cm^?3 near room temperature, and a temperature-independent Hall mobility of 2 cm²/V·sec. Optical absorption measurements show the optical band gap to be ?2.3 eV; the octahedral field splitting of the Fe²⁺d-levels is 10 200 cm^?1. Magnetic measurements show that n_eff is 5.26, from which a trigonal field splitting of 950 cm^?1 is derived.     

Synthesis of PANI and Study of Morphology in the Process of Polymerization

The polyaniline micro/nanostructure was prepared by a self‐assembly process with molybdic acid as dopants in the presence of ammonium persulfate as the oxidant. It was found that the morphology of PANI micro/nanostructure was affected by the concentration of the dopant, that is, the morphology of PANI changed from nanofibers to co‐existence of nanofibers and microspheres as the molar ratio of molybdic acid to aniline varied from 0.01 to 1.5. Under the same condition it was also found that the conductivity value of PANI enhanced from 4.58×10^?3 S·cm^?1 to 3.8×10^?1 S·cm^?1. The structure of PANI was characterized by FTIR and XRD which confirmed the presence of the molybdic acid in the PANI. The electrochemical characteristics of the PANI nanofibers were investigated by means of cyclic voltammetry. The morphology of PANI in the process of polymerization was characterized by SEM. It was found that when the molar ratio of molybdic acid to aniline was 0.3, the morphology of PANI was co‐existence of nanofibers and microspheres and the formation of microspheres was ahead of the nanofibers.     

Use of a nitrate-selective electrode for perrhenate and perchlorate

The nitate-selective membrane electrode based on tributyloctadecylphosphonium nitrate can be used to quantify perrhenate and perchlorate after appropriate conditioning of the membrane. Near-Nernstian responses are obtained for 10^?3–10^?6 M perrhenate and 10^?2–4 × 10^?6 M perchlorate. Iron(II), copper(II) and chloride do not interfere in moderate amounts; other interferences are discussed. Rhenium leaches are analysed after suitable sample preparation. The electrode is useful in following the potentiometric titration of perrhenate with nitron.     

Fluorescence quenching of polystyrene by oxygen

The fluorescence quenching of polystyrene by oxygen at room temperature was investigated. The diffusion coefficient of oxygen in polystyrene films was taken as 3.1 × 10^?7 cm²/sec; the energy migration coefficient of polystyrene in the excited singlet state was estimated as 6 × 10^?6 cm²/sec.     

An electsochemical study of copper(II) nitrate and perchlorate in n,n-dimethylformamide

Polarographic, cyclic voltammetric and controlled-potential coulometric studies of copper(II) nitrate and perchlorate in dimethylformamide are reported. Copper(II) in copper(II) perchlorate solutions is directly reduced in a 2e step to copper metal at platinum electrodes and to a copper amalgam at mercury electrodes. Copper(II) in the presence of nitrate forms a complex of composition Cu(N0₃)₂ in DMF; the dissociation constant, measured polarographically, is 9 × lO^-5. The copper(II) nitrate complex is electrochemically reduced in two steps consisting of a reversible dissociation of the complex followed by direct reduction of copper(II) ion to copper(0). The diffusion coefficients of copper(II) ion and the copper(II) nitrate complex are 4.91 × lO^-6 cm² s^-1 and 4.33 × 10^-6 cm² s^-1, respectively.     

Homooxacalix[3]arene Derivatives as Ionophores for Serotonin‐Selective Membrane Electrodes

Homooxacalix[3]arene derivatives are effective ionophores for constructing serotonin‐selective membrane electrodes. An electrode based on one of the derivatives, tris(methoxyphenylpropyloxy)hexahomooxacalix[3]arene‐triethyl ether, with potassium tetrakis(p‐chlorophenyl)borate (20 mol% relative to the ionophore) as an ionic additive and bis(2‐ethylhexyl) sebacate as a solvent mediator in a poly(vinyl chloride) membrane matrix, displayed much better selectivity for serotonin than for various organic ammonium ions and inorganic cations. The electrode exhibited a near‐Nernstian response to serotonin in the concentration range of 2×10^?4 to 1×10^?2 M with a slope of 56.4 mV per concentration decade in physiological saline containing 150 mM NaCl and 10 mM Na₂HPO₄/NaH₂PO₄ (pH 7.4). The limit of the detection was 8×10^?5 M. The selectivity pattern of this electrode was quite different from that of an electrode using calix[6]arene‐hexaacetic acid hexaethyl ester, a well‐known ionophore for primary organic ammonium ions, which did not induce an enhanced response to serotonin. The developed electrode was used for the active loading of serotonin in liposomes induced by transmembrane pH gradients.     

Measurement of strong nonlinear absorption in stilbene-chloroform solutions,explained by the superposition of two-photon absorption and one-photon absorption from the excited state

A strong nonlinear absorption is measured when ruby laser light passes through a solution of stilbene in chloroform. The experimental results are interpreted by the use of the following model: two-photon absorption (TPA) is followed by one-photon absorption (OPA) by the excited molecules. The solution of the corresponding system of rate equations and fitting of parameters to the experimental curve give the TPA cross section σ⁽²⁾ = 8 × 10^?49 cm⁴ sec/photon and the product σ⁽¹⁾ τ₁₀ = 3 × 10^?26 cm² sec. Measurements at other frequencies are in agreement with this model.     

Determination of Benzoyl Peroxide Levels in Wheat Flour and Pharmaceutical Preparations by Differential Pulse Voltammetry in Nonaqueous Media

Abstract

Benzoyl peroxide (BP) was determined by differential pulse voltammetry (DPV) using a glassy carbon electrode in a dichloromethane‐acetic acid (1.5×10^?2 mol l^?1) solution and tetrabutyl ammonium perchlorate (0.01 mol l^?1) as the supporting electrolyte. The peak potential was ?0.045 V (vs. Ag/AgCl). There was a good linear relationship between the peak current and the benzoyl peroxide concentration in the range of 2.5×10^?6–1.0×10^?4 mol l^?1. The detection limit of the method was 2.5×10^?7 mol l^?1. The recovery was 94.8–106.0%. The samples of wheat flour and the pharmaceutical preparations for the treatment of acne vulgaris were directly detected with desired results. The reaction mechanism of benzoyl peroxide on the electrode was also discussed, which was two electrons and two protons irreversible reaction.     

Über die Anwendung der Kohlepaste-Elektrode zur inversvoltammetrischen Bestimmung kleiner Quecksilbermengen

The applicability of the carbon paste electrode to the determination of trace quantities of mercury has been investigated in a base electrolyte of 0.1 N KSCN + 0.025 N HCl containing 25 ng/ml copper. The detection limit of the mercury determination has a value near 2.5 ng/ml (1.25×10^?8 M), if pre-electrolysis is carried out 10 min at ?1.0 V and the current voltage curve is registered with a scan rate of 16.7 mV/sec between ?0.5 and +0.5 V. The peak height is directly proportional to the concentration in the range from 1.25×10^?8 to 1.25×10^?6 M. With appropriate preconditioning the carbon paste electrode can be used for several measurements without renewing the surface.     

Direct determination of traces of silver in mercury by voltammetry at the hanging mercury drop electrode in acetonitrile medium

A direct method for the determination of silver in mercury is described. The sample of mercury is introduced into the container of the hanging mercury drop electrode and the anodic voltammograms are recorded in a 0.1 M lithium perchlorate solution in acetonitrile. The anodic peak of silver obtained under these conditions is well separated from the mercury dissolution current. The peak height is proportional to silver concentration over the wide range 2 × 10^?6 mol dm^?3 (1.6 × 10^?6%) to at least 2.0 × 10^?2 mol dm^?3. No prior separation is needed; the procedure requires less than 20 min. The diffusion coefficient of silver in mercury was determined at several temperatures. It was found that silver in mercury does not form intermetallic compounds with copper, lead, thallium, cadmium, tin and bismuth.     

Spectrophotometric determination of copper(II) and its application to a plant sample containing zinc,iron, and manganese

Salicylaldehyde thiosemicarbazone instantaneously forms a green complex with copper(II) in the optimum pH range 5–7. A fivefold molar excess of the reagent is sufficient for the full development of the color. Beer's law is obeyed in the range 0.5–6.0 ppm of copper. The optimum concentration range as evaluated by Ringbom's method is 1.4–5.8 ppm. At 375 nm the sensitivity of the reaction and the molar absorptivity are 0.006 μg cm^?2 and 9.2 × 10³ liters mol^?1 cm^?1, respectively. The effects of pH, reagent concentration, time, order of addition of the solutions, and the interference of various ions were investigated. Copper in plant samples, containing zinc, iron, and manganese, was determined.     

HCO radical kinetics: Conjunction of laser photolysis and intracavity dye laser spectroscopy

HCO radical at a concentration of about 10¹⁴ cm^?3 is produced by monochromatic laser photolysis of H₂CO with a 0.6 mJ frequency-doubled, flashlamp-pumped dye laser pulse. Intracavity dye laser spectroscopy quantitatively monitors HCO absorbance near 614 nm as a function of delay time between photolysis and probing pulses. Rate constants for HCO + O₂ and HCO + NO are found to be 4.0 ± 0.8 × 10^?12 and 1.45 ± 0.2 × 10^?11 cm³ molecule^?1 sec^?1.     

A Simplified Neutron Activation Analysis Method for Copper and Manganese

Abstract

An activation analysis procedure has been developed to determine manganese and copper serum values in one milliliter of serum or less rapidly and with good precision. The sample is irradiated in a neutron flux of 10¹²cm^?2 sec^?1 for two hours followed by nitric acid digestion. The activity plus carrier is absorbed from saturated lithium chloride solution on Dowexl-8 contained in a syringe. After washing the resin with more lithium chloride, the syringe is counted in a five inch well crystal multichannel spectrometer. The carrier is washed off the syringe by dilute acid and analyzed. The sample concentration is determined by comparison to irradiated standards correcting the unknown for decay and chemical yield.     

Radiation-induced grafting of styrene vapor to polyethylene

The radiation-induced grafting of styrene vapor to low-density polyethylene film of 0.063 mm thickness was studied at 23°C at a dose rate of 1.98 × 10⁴ rad/hr. The concentration C of monomer in the film was measured as a function of pre-irradiation exposure time to monomer vapor. The concentration-dependent diffusion coefficient of styrene in polyethylene was calculated to be 4.9 × 10^?9 exp {2.0C/C₀} cm²/sec, where C₀ is the saturation concentration of styrene in the film, and a linear boundary diffusion coefficient for styrene vapor into polyethylene film was found to be 2.0 × 10^?7 cm/sec. The rate of grafting was determined as a function of the concentration of styrene absorbed in the film. The maximum graft yield was obtained with an initial styrene concentration in the film of 4 wt-%. Under conditions of low initial monomer concentration, the grafting rate increases with irradiation time. The results are compared with previously published data on grafting of polyethylene from methanol–styrene solutions. They are explained in terms of the viscosity of the amorphous region as a function of styrene content and the resistance to the diffusion of monomer at the film–vapor interface.     

2‐Aminocyclopentene‐1‐Dithiocarboxylic Acid‐Naphthalene Adsorbent for the Preconcentration and Determination of a Trace Copper in Real Samples by Spectrophotometric Method

A solid uncharged complex produced from 2‐aminocyclopentene‐1‐dithiocarboxylic acid (synthetic reagent) on naphthalene provides a very sensitive, selective and economical method for the preconcentration and determination of trace amounts of copper in drug and alloy samples. The 2‐aminocyclopentene‐1‐dithiocarboxylate of copper is retained quantitatively on microcrystalline naphthalene in the pH range 2.8–3.3. After filtration the solid mass consisting of copper complex‐naphthalene is dissolved with 4 mL of dimethylformamide (DMF). The absorbance is measured at 462 nm with a spectrophotometer against the reagent blank and molar absorptivity found to be 2.8 × 10⁵ liter mol^?1 cm^?1. Beer's law is obeyed over the concentration range of 0.1–16.0 μg of copper in 4 mL of the dimethylformamide solution. Detection limit is 3 ng mL^?1 [signal to noise ratio = 2]. Ten replicate determinations on a sample containing 1 μg of copper gave a relative standard deviation of 0.76%. The interference of a large number of anions and cations have been studied and the optimized conditions developed were utilized for determination of copper in various real samples.     

Polarographic Determination of Glycyrrhizic Acid Based on Double Enhancement Action of Surfactant and Dissolved Oxygen

ABSTRACT

A method for the determination of glycyrrhizic acid (GA) is described based on polarographic current of GA enhanced doubly by both cation surfactant (cetyl trimethyl ammonium bromide (CTMAB)), and dissolved oxygen (including oxygen-derived species). The doubly enhanced current of GA includes two additional currents. One is the increased reduction current of adsorbed GA induced by CTMAB. The other is the catalytic current of GA caused by the dissolved oxygen molecule and its derived species. In 0.1 M NaAc-Hac (pH4.7±0.1) ～ 1x10^?5 M CTMAB supporting electrolyte without deoxygenation, the enhanced current of GA is linearly proportional to its concentration in the range of 4x10^?7 M ～ 4.0x10^?6 M. The detection limit is 1.8x10^?7 M. The double enhanced current of GA in sensitivity is about 15 times higher than its reduction wave in the same acetate buffer solution.     

A Sensitive Visible Spectrophotometric Method for Copper Using Bis-Substituted Thiocarbamoyl Trisulfides

Abstract

Bis-substituted thiocarbamoyl disulfides (thiuram disulfides) were investigated as chromogenic reagents for the analysis of copper in trichloroacetic acid solutions. It was found that hydrogen peroxide speeded color development, increased color stability and enhanced color intensity in a trichloroacetic acid-alcohol matrix. In the presence of hydrogen peroxide, all copper complexes had molar absorptivities exceeding 30,000. Bis-pentamethylene thiocarbamoyl disulfide was selected as the best commerically available reagent of those investigated. The procedure is almost interference free, silver and mercury being the most serious interference. The sensitivity is 6 × 10^?3 micrograms/cm².     

Neutron activation analysis of high-purity selenium : Determination of phosphorus,sulfur and chlorine

Chlorine was determined in selenium by irradiation of 2-g samples for 37 min at a flux of 8·10¹⁰ n/cm²/sec. Chlorine was volatilised from hot concentrated nitric acid and precipitated as silver chloride. The isotope ³⁸Cl (T_{$\text{1}\text{2}$}=37.3 min) was counted by γ-spectrometry. Sulfur and phosphorus were determined by irradiating 50-mg samples with and without cadmium shielding for 4 days at a thermal flux of 6·10¹² n/cm²/sec and a fast flux of 4·10¹¹ n/cm²/sec. The matrix activities were separated by distillation from sulfuric acid-hydrobromic acid at 200–220°. The isotope ³²P (T_{$\text{1}\text{2}$}=14.3 d) was then precipitated, together with phosphate carrier, as ammonium phosphomolybdate, and counted with a G.M. tube. Amounts of 0.4–1 p.p.m. chlorine, 65–520 p.p.b. phosphorus and 1.5–4.6 p.p.m. sulfur were found in high-purity selenium samples.     

Reaction of H with C2N2 at pressures near 1 torr

The rate of disappearance of C₂N₂ in the presence of a large excess of H atoms has been measured in a discharge-flow system at pressures near 1 torr and temperatures in the range of 282–338 K. Under these conditions the reaction has a small negative temperature coefficient. A transition from second-order to third-order kinetics with decreasing pressure occurs at pressures near 1 torr. The results are discussed in terms of the mechanism where k₇ = (1.5 ± 0.2) × 10^–15 cm³/molec¹·sec is found for the forward rate of reaction (7). The results also give k₇k₈/k_?7 = 3.7 × 10^?31 cm⁶/molec²·sec and k₇k₉/k_?7 = 3.0 × 10^?32 cm⁶/molec²·sec, the first being probably an upper limit and the second probably a lower limit; hence k₈/k₉ = 12 is found as an upper limit.