Regioselective synthesis of polyfluoroalkyl-substituted 7-(1<Emphasis Type="Italic">H</Emphasis>-1,2,3-triazol-1-yl)-6,7-dihydro-1<Emphasis Type="Italic">H</Emphasis>-indazol-4(5<Emphasis Type="Italic">H</Emphasis>)-ones

3-Polyfluoroalkyl-6,6-dimethyl-7-(1H-1,2,3-triazol-1-yl)-6,7-dihydro-1H-indazol-4(5H)-ones were synthesized with high regioselectivity by 1,3-dipolar cycloaddition of terminal alkynes (phenylacetylene, hex- 1-yne, hept-1-yne, and but-3-yn-1-ol) to 7-azido-6,6-dimethyl-3-polyfluoroalkyl-6,7-dihydro-1H-indazol-4(5H)-ones which were prepared by bromination of 6,6-dimethyl-3-polyfluoroalkyl-6,7-dihydro-1H-indazol- 4(5H)-ones with N-bromosuccinimide in anhydrous carbon tetrachloride, followed by treatment of the corresponding 7-bromo derivatives with sodium azide.     

Temperature- and pressure-responsive properties of <Emphasis Type="SmallCaps">l</Emphasis>- and<Emphasis Type="SmallCaps"> dl</Emphasis>-forms of poly(<Emphasis Type="Italic">N</Emphasis>-(1-hydroxymethyl)propylmethacrylamide) in aqueous solutions

The structural transition of the l- and dl forms of poly(N-(1- hydroxymethyl)propylmethacrylamide (PHMPMA) in aqueous solution was studied by measuring the pressure dependence of the apparent scattering intensity, differential scanning calorimetry (DSC), and circular dichroism (CD). The thermodynamic implications of the results are discussed in relation to the chiral structure of the side chain, and differences in the thermal and barometric transitions. T-P diagrams of the transition showed characteristic ellipsoid features. Antagonism of the temperature and pressure effects was observed only for P(dl-HMPMA). For P(l-HMPMA), the transition temperature (T _tr) decreased with increasing pressure, and the highest T _tr was observed at atmospheric pressure (0.1 MPa). For both polymers, the highest P _trs were observed at the lowest temperatures. The l polymer showed a specific negative peak in its CD spectrum at around 220 nm in the lower temperature region and the temperature dependence was reproduced by a single-step transition, with the midpoint corresponding to the T _tr obtained from the scattering measurements. Coupled with the results from the DSC, the different behavior between the P(l-HMPMA) and P(dl-HMPMA) could be explained in terms of the chain states before and after the transition. The cooperative factors derived from the DSC measurement revealed that about 4 to 5 polymers of the present size were necessary to perform a thermal transition for P(l-HMPMA), and that P(dl-HMPMA) underwent its transition as an almost single molecular event.This revised version was published online in June 2005 with correction to the article category.     

Alkylation of 2-(hydroxyimino)-5<Emphasis Type="Italic">H</Emphasis>-[1,3]thiazolo[3,2-<Emphasis Type="Italic">a</Emphasis>]-pyrimidin-3(2<Emphasis Type="Italic">H</Emphasis>)-ones

Alkylation products were obtained from ethyl 2-(hydroxyimino)-7-methyl-3-oxo-5-aryl-2,3- dihydro-5H-[1,3]thiazolo[3,2-a]pyrimidin-6-carboxylates at the treatment with alkyl halides, dimethyl sulfate, and diazomethane. Diazomethane alkylated the initial substrate at the oxygen atom of the carbonyl group of the thiazolidine fragment, the other reagents, at the oxygen atom of the hydroxyimino group.     

Reaction 5-(Arylmethylidene)pyrimidine-2,4,6(1<Emphasis Type="Italic">H</Emphasis>,3<Emphasis Type="Italic">H</Emphasis>,5<Emphasis Type="Italic">H</Emphasis>)-triones with L-Proline and Aldehydes

Boiling in toluene of 5-(arylmethylidene)pyrimidine-2,4,6(1H,3H,5H)-triones with L-proline and aldehyde led to the formation of previously unknown substituted 1′-arylhexahydro-1H-spiro[pyrimidine-5,2′-pyrrolysine]-2,4,6(1H,3Н,5Н)-triones.     

Crystal structure of 9-(5,5-dimethyl-2,4,5,6-tetrahydro-1<Emphasis Type="Italic">H</Emphasis>-phenalen-2-yl)-5,5,9-trimethyl-5,6,8,9-tetrahydrocyclopenta[<Emphasis Type="Italic">a</Emphasis>]phenalen-10(4<Emphasis Type="Italic">H</Emphasis>)-one

The structure of 9-(5,5-dimethyl-2,4,5,6-tetrahydro-1H-phenalen-2-yl)-5,5,9-trimethyl-5,6,8,9-tetrahydrocyclopenta[а]phenalen-10(4H)-one was determined by X-ray crystallography. The intermolecular interaction energies were calculated by the atom-atomic approach for the crystal structure. The character of the crystal structure and the structural subclass were established.     

Synthesis and reactivity of 4-hydroxy-5-methyl-2-(2-oxo-2<Emphasis Type="Italic">H</Emphasis>-chromen-3-yl)-6<Emphasis Type="Italic">H</Emphasis>-1,3-oxazin-6-ones

4-Hydroxy-6H-1,3-oxazin-6-ones with a coumarin fragment in position 2 of the oxazine ring were synthesized. Their hydrolysis, alcoholysis, and hydrazinolysis afforded a number of new coumarin derivatives containing malonamic acid and 1,2,4-triazole residues. The low stability of the title compounds toward oxygencentered nucleophiles was interpreted by quantum chemical calculations.     

Synthesis of 7-(furan-2-yl)-7,8,10,10a-tetrahydro-6<Emphasis Type="Italic">H</Emphasis>-benzo[<Emphasis Type="Italic">c</Emphasis>]-chromen-6,9(6a<Emphasis Type="Italic">H</Emphasis>)-diones

Methods of synthesis were developed for 7-(furan-2-yl)-substituted 7,8,10,10a-tetrahydrobenzo[c] chromen-6,9-diones by regioselective [4+2]-cycloaddition of coumarin-3-carboxylic acids to 2-(3-trimethylsiloxybuta- 1,3-dien-1-yl)furans. The [4+2]-cycloaddition was efficiently catalyzed with L-proline.     

Extracellular Production and Characterization of Two <Emphasis Type="Italic">Streptomyces</Emphasis><Emphasis Type="SmallCaps">l</Emphasis>-Asparaginases

l-Asparaginase (ASNase) has proved its use in medical and food industries. Sequence-based screening showed the thermophilic Streptomyces strain Streptomyces thermoluteus subsp. fuscus NBRC 14270 (14270 ASNase) to positive against predicted ASNase primary sequences. The 14270 ASNase gene and four l-asparaginase genes from Streptomyces coelicolor, Streptomyces avermitilis, and Streptomyces griseus (SGR ASNase) were expressed in Streptomyces lividans using a hyperexpression vector: pTONA5a. Among those genes, only 14270 ASNase and SGR ASNase were successful for overexpression and detected in culture supernatants without an artificial signal peptide. Comparison of the two Streptomyces enzymes described above demonstrated that 14270 ASNase was superior to SGR ASNase in terms of optimum temperature, thermal stability, and pH stability.     

Microwave assisted synthesis of substituted (<Emphasis Type="Italic">Z</Emphasis>)-2-{[1-phenyl-3-(thiophen-2-yl)-1<Emphasis Type="Italic">H</Emphasis>-pyrazol- 4-yl]methylene}benzofuran-3(2<Emphasis Type="Italic">H</Emphasis>)-ones and their antimicrobial activity

Aurones, pyrazole and thiophene scaffolds are known for their potential antimicrobial activity. Herein, we have synthesized hybrid compounds containing three substituted (Z)-2-{[1-phenyl-3-(thiophen-2-yl)- 1H-pyrazol-4-yl]methylene}benzofuran-3(2H)-ones that had been produced from substituted (E)-1-(2-hydroxyphenyl)- 3-[1-phenyl-3-(thiophen-2-yl)-1H-pyrazol-4-yl]prop-2-en-1-ones in high yields. All synthesized compounds were tested in vitro for their antimicrobial activity. Several of those demonstrated promising activity against some fungal and bacterial strains.     

Synthesis and antimicrobial screening of novel 9-{2-[(1<Emphasis Type="Italic">H</Emphasis>-1,2,3-triazol-4-yl)methoxy]phenyl}-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexahydro-1<Emphasis Type="Italic">H</Emphasis>-xanthene-1,8(2<Emphasis Type="Italic">H</Emphasis>)-dione derivatives

A series of novel 9-{2-[(1H-1,2,3-triazol-4-yl)methoxy]phenyl}-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione derivatives were synthesized by a click chemistry approach. The structures of all the newly synthesized compounds were characterized by IR, MASS, ¹H and ¹³C NMR spectral data. The final analogues showed good to excellent antibacterial and antifungal activities in an agar well diffusion assay. Compounds 6i and 6f were the most active against all the test bacterial and fungal strains.     

Mechanistic aspects of ligand substitution on <Emphasis Type="Italic">cis</Emphasis>-diaqua(<Emphasis Type="Italic">cis</Emphasis>-1,2-diaminocyclohexane)platinum(II) by Glycine-<Emphasis Type="SmallCaps">l</Emphasis>-Leucine

The kinetics of the interaction of glycine-l-leucine (Glyleu) with cis-[Pt(cis-dach)(OH₂)₂]²⁺ (dach = 1,2-diaminocyclohexane) has been studied spectrophotometrically as a function of [cis-[Pt(cis-dach)(OH₂)₂]²⁺], [Glyleu] and temperature at pH 4.0, where the complex exists predominantly as the diaqua species and Glyleu as a zwitterion. The substitution reaction shows two consecutive steps: the first is the ligand-assisted anation and the second is the chelation step. The activation parameters for both the steps were evaluated using Eyring’s equation. The low ∆H₁^≠ (51.9 ± 2.8 kJmol⁻¹) and large negative value of ∆S₁^≠ (−152 ± 8 JK⁻¹mol⁻¹) as well as ∆H₂^≠ (54.4 ± 1.7 kJmol⁻¹) and ∆S₂^≠ (−162 ± 5 JK⁻¹mol⁻¹) indicate an associative mode of activation for both the aqua ligand substitution processes.     

Carboxamides of Dihydropyridin-2(1<Emphasis Type="Italic">H</Emphasis>)-ones

Summary. 3-Carboxamides and 3-carboxanilides of 6-alkyl and 6-aryldihydropyridin-2(1H)-ones have been prepared via different reaction pathways. All synthesized amides show hydrogen bonds in their NMR spectra. The 4-hydroxy compounds were obtained as a mixture of tautomers. Their configurations were elucidated by NMR experiments.Received December 16, 2002; accepted December 20, 2002 Published online June 2, 2003     

Optical enzyme sensor for determining <Emphasis Type="SmallCaps">l</Emphasis>-lysine content using <Emphasis Type="SmallCaps">l</Emphasis>-lysine oxidase from the rockfish <Emphasis Type="BoldItalic">Sebastes schlegeli</Emphasis>

l-Lysine (l-Lys) in living bodies is critical for metabolism; therefore, determination of its levels in food is important. Most enzymatic methods for l-Lys analysis are performed using l-lysine oxidase (LyOx), but commercially manufactured LyOx is generally not highly selective for l-Lys among amino acids. We previously isolated LyOx as an antibacterial protein secreted from the skin of the rockfish Sebastes schlegeli. In the present study, we developed an optical enzyme sensor system for rapid and continuous determination of l-Lys using this LyOx. The system comprised an immobilized LyOx membrane, an optical oxygen probe, a flow system, and a personal computer. The amount of l-Lys was detected as a decrease in the oxygen concentration due to the LyOx reaction. The specificity of the sensor was examined against various amino acids. The sensor response was specific for l-Lys. Good reproducibility was obtained in 58 assays. The response of the sensor using commercially prepared LyOx was unstable compared with the response using LyOx isolated in our laboratory. Our sensor system could be used for 5 weeks without our having to change the enzyme membrane. The calibration curve for a standard l-Lys solution was linear from 0.1 to 3.0 mmol L⁻¹. One assay could be completed within 2 min. The sensor was applied to determine the l-Lys content in food samples such as bonito cooking water and scallop hepatopancreas. The values obtained using the sensor and conventional high-performance liquid chromatography methods were well correlated.     

Three-component heterocyclization of 5-(arylmethylidene)pyrimidine-2,4,6(1<Emphasis Type="Italic">H</Emphasis>,3<Emphasis Type="Italic">H</Emphasis>,5<Emphasis Type="Italic">H</Emphasis>)-triones with aldehydes and amino acids

Previously unknown substituted 4-aryl-2,7,9-triazaspiro[4.5]decane-6,8,10-triones were synthesized in 50–70% yield by heating 5-(arylmethylidene)barbituric acids with N-methyl- or N-phenylglycine and para-formaldehyde or 4-methoxybenzaldehyde in boiling toluene for 14 h.     

Thermal properties of amphiphilic biodegradable triblock copolymer of <Emphasis Type="SmallCaps">l</Emphasis>,<Emphasis Type="SmallCaps">l</Emphasis>-lactide and ethylene glycol

Samples of poly(l,l-lactide)-block-poly(ethylene glycol)-block-poly(l,l-lactide) (PLLA-PEG-PLLA) were synthesized from l,l-lactide polymerization using stannous 2-ethylhexanoate, Sn(Oct)₂ as initiator and di-hydroxy-terminated poly(ethylene glycol) (PEG) (M _n  = 4000 g mol⁻¹) as co-initiator. The chemical linkage between the PEG segment and the PLA segments was characterized by Fourier transform infrared spectroscopy (FTIR). Thermogravimetry analysis (TG) revealed the copolymers composition and was capable to show the deleterious effect of an excess of Sn(Oct)₂ in the polymer thermal stability, while Differential Scanning Calorimetry (DSC) allowed the observation of the miscibility between the PLLA and PEG segments in the different copolymers.     

Mixtures poly((<Emphasis Type="Italic">R</Emphasis>)-3-hydroxybutyrate) and poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactic acid) subjected to DSC

Blends of bacterial poly((R)-3-hydroxybutyrate) (PHB) and poly(l-lactic acid) (PLLA) synthesized by polycondensation of l-lactic acid or by ring-opening polymerization of l-lactide were studied. Miscibility was investigated through both conventional differential scanning calorimetry (DSC) and temperature-modulated DSC (TMDSC). PHB and low-molar mass PLLA were miscible in a whole concentration range, and a single glass transition temperature was observed. On the other hand, PHB/high-molar mass PLLA mixtures phase separate, giving rise to two glass transition temperatures corresponding to PHB and PLLA. A treatment of blends at 190 °C leads to formation of block/multiblock/random copolymers, and blends become miscible.     

Synthesis of (<Emphasis Type="Italic">S</Emphasis>)-(+)-6-aryl-3-acetyl-6-trifluoromethyl-5,6-dihydropyridin-2(1<Emphasis Type="Italic">H</Emphasis>)-ones

(S)-(+)-4-Amino-4-aryl-5,5,5-trifluoropentan-2-ones reacted with ethyl acetoacetate and ethyl trifluoroacetoacetate to give (S)-(+)-6-aryl-3-acetyl(or trifluoroacetyl)-6-trifluoromethyl-5,6-dihydropyridin-2(1H)-ones.     

Synthesis and antimicrobial activity of novel substituted 4-[3-(1<Emphasis Type="Italic">H</Emphasis>-benzimidazol-2-yl)-4-hydroxybenzyl]-2-(1<Emphasis Type="Italic">H</Emphasis>-benzimidazol-2-yl)phenol derivatives

A series of novel substituted bis-benzimidazole derivatives were synthesized by reaction of 5,5′-methylenebis(2-hydroxybenzaldehyde) with various substituted o-phenylenediamines in glacial acetic acid. The structure of the newly synthesized compounds was elucidated by ¹H and ¹³C NMR, FT-IR, and MS spectra, and their antimicrobial activity against gram positive and gram negative bacteria and antifungal activity were evaluated. The thienyl-substituted derivative showed significant activity against Bacillus licheniformis. Bacillus subtilis, Staphylococcus aureus, Klebsiella pneumonia (bacteria), and Fusarium solani (fungi). The activities of the fluoro-substituted substituted derivative against some bacterial strains and of the thienyl-substituted derivative against fungi were found to be similar to those of standard drugs.     

Synthesis of substituted 3,4-dihydropyrimidin-2(1<Emphasis Type="Italic">H</Emphasis>)-ones and pyrimidin-2(1<Emphasis Type="Italic">H</Emphasis>)-ones by the Biginelli reaction with 3,5-Di-<Emphasis Type="Italic">tert</Emphasis>-butyl-4-hydroxybenzaldehyde

Three-component acid-catalyzed cyclocondensation of 3,5-di-tret-butyl-4-hydroxybenzaldehyde with urea and ethyl acetoacetate or α-nitroacetophenone (Biginelli reaction) under homogeneous conditions gave the corresponding 5-substituted 3,4-dihydropyrimidin-2(1H)-ones having in position 4 of the heteroring an aryl substituent with sterically shielded hydroxy group. The condensation catalyzed by inorganic salts (Fe³⁺, Co²⁺, Zn²⁺, Li⁺) was successful only with ethyl acetoacetate as initial methylene-active component. Under analogous conditions, acetophenone and 4-fluoroacetophenone gave rise to 4,6-diarylpyrimidin-2(1H)-ones which are capable of undergoing phenol-quinonemethide tautomerism.