Water soluble crown ethers: selective masking agents for improving extraction-separation of zinc and lead cations

The presence of crown ethers 12C4, 15C5 and 18C6 (CE) in aqueous phase influences extraction-separation of zinc and lead ions (M²⁺) by acidic extractant bis(2-ethylhexyl)phosphoric acid (DEHPA) in cyclohexane. In fact, higher complexing ability of the crown ethers towards lead ions causes a greater shift toward higher pH region of the extraction curves versus aqueous phase pH, and consequently an enhancement in the extraction selectivity. The order of extraction selectivity in the presence of the crown ethers varies as 18C6 > 15C5 > 12C4. The analysis of extraction data allows evaluating the stability constants of [M?CE]²⁺ complexes in the aqueous phase. It is demonstrated that the influence of aqueous crown ethers on the extraction process is deeply affected by the organic diluent used. The influence of temperature on the extraction process was studied in the range 286–302 K. This study lets estimating the thermodynamic parameters, i.e., free-energy (ΔGº), enthalpy (ΔΗº), and entropy (ΔSº) changes associated with the extraction process as well as the complexation of cations by the crown ethers in water.     

Extraction of rare earth elements with phosphoryl-containing lariat crown ether in the presence of ionic liquids

Interfacial distribution of rare earth elements (REE) La, Ce, Pr, Nd, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y between aqueous solutions of their nitrates and solutions of the lariat crown ether 1,4,10,13-tetraoxa-7,16-diaza(diphenylphosphinylmethyl)cyclooctadecane in dichloroethane was studied in the presence of the ionic liquids 1-butyl-3-methylimidazolium hexafluorophosphate and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide. The stoichiometry of extracted complexes was determined; the effect of HNO₃ concentration in the aqueous phase and the nature of extractant and ionic liquid on the extraction efficiency of REE(III) was considered.     

Extraction of rare-earth,yttrium, and scandium perchlorates by podands bearing diphenylphosphorylacetamide terminal groups

Partition of trace amounts of metal (La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Y, and Sc) perchlorates was studied between aqueous HClO₄ solutions and dichloroethane solutions of phosphorus podands bearing two Ph₂P(O)CH₂C(O)NH-terminal groups linked via di-and triethylene glycol spacers. The stoichiometry of extracted complexes was determined. The efficiency of metal ion recovery to the organic phase was studied as a function of aqueous HClO₄ concentration and nature of the organic solvent. The compounds synthesized have higher metal extraction capacities in HClO₄ solutions than (dibutylcarbamoyl)diphenylphoshine oxide. The utility of macroporous polymer sorbents impregnated by these podands for extracting and concentrating rare earth(III) and scandium(III) ions from aqueous perchlorate solutions was demonstrated.     

Task-specific ionic liquid tetraalkylammonium hydrogen phthalate as an extractant for U(VI) extraction from aqueous media

In this paper a quaternary ammonium based room temperature ionic liquid (IL) trioctylmethylammonium hydrogen phthalate has been reported as promising extractant for separation of U(VI) from other metal ions from aqueous media. The IL was synthesized via metathesis route and characterized using various techniques such as hydrogen nuclear magnetic resonance, electron spray ionization mass spectrometry and infra red etc. The newly synthesized IL was evaluated for extraction of U(VI), Th(IV), La(III), Y(III), Nd(III) and Fe(III) from aqueous solutions and follow the order: U(VI) > Th(IV) > Fe(III) > Y(III) >> Nd(III) ~ La(III).     

Kinetics study of selective removal of lead(II) in an aqueous solution containing lead(II), copper(II) and cadmium(II) across bulk liquid membrane

Transport of Pb(II) ion from equimolar aqueous solutions of Pb(II), Cu(II) and Cd(II) as well as from aqueous solutions containing only Pb(II) source phase (C_metal = 1.0 × 10^?4 mol L^?1) through bulk liquid membranes containing crown ether and oleic acid as carrier has been investigated. The initial fluxes of transported metal ions depend on the hydrophile–lipophile balance (HLB) and molar volumes (Vx) of crown ethers. The initial fluxes of Pb(II), Cu(II), and Cd(II) decrease with increase of HLB value for azacrown ether, i.e., tetraaza-14-crown-4 (A₄14C4), L1 > benzo-15-crown-5 (B15C5), L2 > 4′-Aminobenzo-15C5, L3 > nitrobenzo-15-crown-5 (NB15C5), L4. The selectivity of the metal ions showed the following separation factors (SF): SF_Pb–Cu = 2.15, SF_Cu–Cd = 2.10, SF_Pb–Cd = 4.52. The highest transport recovery for Pb(II) was observed for L1 (99.3 %).     

On-line solid phase extraction coupled to ICP-OES for simultaneous preconcentration and determination of some transition elements

An on-line solid phase extraction method coupled to ICP-OES was developed for the simultaneous determination of Ce(III), La(III), Sm(III), Y(III), Yb(III), Dy(III), Hf(IV), Zr(IV) and Th(IV) ions in aqueous samples. The ions forming hydrophobic complexes with 3,5,7,2?,4?-pentahydroxy flavone (morin) and were retained on an octadecyl silica (C₁₈) minicolumn. The adsorbed chelates were subsequently eluted from the column and directly transferred into the plasma with 80% (v/v) propanol:H₂O solution for the simultaneous determination of the metal ions. Different parameters affecting the ICP-OES signal intensities and extraction efficiency including pH of the solution, concentration of the chelating agent, flow rate and type of the eluent, loading rate and ionic strength were evaluated and optimized. The calibration graphs were linear in the range of 0.2–100 μg L^?1 and limit of detections for the extraction and determination of the ions in the aqueous sample (25 mL) were in the range 0.10–0.46 μg L^?1. The enhancement factors of the method for the metal ions obtained were in the range of 23 to 242 (V _Sample?=?25 mL) and the precision expressed as relative standard deviations (RSD %) was below 6.9%. Finally, the method was successfully applied to determine the target analytes in natural water samples.     

稀土冠醚类配合物的研究 XX: 三价及二价稀土硫氰酸盐与辛二酰双(4'-苯并-15-冠-5)配合物的合成和性质

在乙腈和二氯甲烷混合溶液中合成了三价稀土元素(La, Nd, Eu, Dy, Er, Yb)硫氰酸盐与辛二酰双(4'-苯并-15-冠-5)的六个新配合物。并在氩气氛中, 以四氢呋喃为溶剂, 锂-萘为还原剂, 制得了二价铕硫氰酸盐与辛二酰双(4'-苯并-15-冠-5)的固体配合物。通过元素分析、红外光谱、差热热重分析、荧光光谱、穆斯堡尔谱、电子自旋共振谱、还原性实验等研究了双冠醚与稀土离子的配位作用, 并讨论了三价和二价稀土配合物在物理化学性质上的差别。     

Spectrophotometric Study of the Complexation of Some Lanthanide (III) Ions with a Series of 18-Crowns-6 in DMSO Solution Using Murexide as a Metallochromic Indicator

The complexation of La(III), Ce(III), Pr(III) and Er(III) with 18-crown-6(18C6), dibenzo-18-crown-6 (DB18C6), dicyclohexano-18-crown-6 (DCY18C6) anddibenzopyridino-18-crown-6 (DBPY18C6) has been studied in dimethylsulfoxide(DMSO) by means of a competitive spectrophotometric method using murexide asa metal ion indicator. The formation constants of the 1 : 1 complexeswere found tovary in the order La(III) > Ce(III) > Pr(III) > Er(III). It was foundthat the structure influences the formation and stability of the resultingcomplexes. The effects ofvarious parameters on complexation are discussed. The order of the stabilityconstants of each lanthanide ion with these macrocycles are18C6 > DC18C6 > DB18C6 > DBPY18C6.     

Synergism of crown ethers in the thenoyl trifluoroacetone extraction of americium(III) in benzene medium

The synergism of the crown ethers (CE) dicyclohexano-18-crown-6 (DC18C6), dibenzo-18-crown-6 (DB18C6) and 18-crown-6 (18C6) has been investigated in the thenoyl trifluoroacetone (HTTA) extraction of americium(III) in benzene medium from an aqueous phase of ionic strength 0.5 and pH 3.50 at room temperature (23°C). The extracted synergistic species have the general formula Am(TTA)₃ · CE except for DC18C6 in which case the species Am(TTA)₃·2CE was also observed at high CE concentrations. The order of synergism was found to be DC18C6>DB18C6>18C6, which is the order of the basicity of CE as indicated by their ability to extract hydrogen ions from nitric acid solutions.     

Piezoelectric Crystal Liquid Flow Detection Systems Based on Alkyl (C18)‐Benzo‐15‐Crown 5 for Organic Compounds and Metal Ions

A water in soluble long‐chain crown ether alkyl (C18)‐benzo‐15‐crown‐5 was synthesized and applied as a coating material on quartz crystal membranes of a liquid flow piezo electric crystal sensor. The oscillating crown ether‐coated piezo electric (PZ) crystal with a home‐made computer inter face was prepared as a liquid chromato graphic (LC) detector for organic species and metal ions in aqueous solutions. The oscillating frequency of the quartz crystal decreased due to the adsorption of organic molecules or metal ions on crown ether molecules. Effects of functional group, molar mass, steric hindrance, and polarity of organic molecules on frequency responses of the crown ether coated PZ crystal detector were investigated. The frequency responses of the crown ether coated PZ crystal detector for various molecules were in the order: amines > carboxylic acids > alcohols > ketones. The crown ether PZ detector also exhibited good sensitivity for some heavy metal ions and the frequency shifts were in the order: Cr³⁺ » Pb²⁺ > Co²⁺ > Cd²⁺ > Ni²⁺ > Cu²⁺. The crown ether coated piezo electric crystal LC detector demonstrated low detection limits for various polar organic molecules, e.g., 6.0 × 10^?5 M for propylamine, and metal ions, e.g., 2.9 × 10^?5 M (1.8 ppm) for Cu²⁺; the crown ether PZ detector also gave good reproducibility when re used. A quite sensitive electrochemical quartz crystal microbalance (EQCM) detection system was also set‐up for detecting trace heavy metal ions in solutions. The variation in frequency of the PZ crystal and the diffusion current were observed simultaneously after the reduction in heavy metal ions such as Cu²⁺ and Ni²⁺. The EQCM detection system exhibited fairly good sensitivity, e.g., 112 Hz/ppm for Cu²⁺ and a good detection limit, e.g., 0.13 ppm for Cu²⁺ ions. Comparison between EQCM and PZ detection systems was made and discussed.     

Extraction of technetium by DB18C6 and 18C6 into nitrobenzene and acetylacetone from an aqueous phase containing NaBH4

The extraction of technetium by DB18C6 and 18C6 into nitrobenzene and different solvents from aqueous phase containing NaBH₄ was investigated. The experimental data indicate that the main extracted species have the formulas TcO/OH/₂.CE or 2TcO/OH/₂.3CE, where CE refers to the crown ethers. The effects of crown ether concentration, pH and organic solvent on the distribution ratio are discussed. The extent of extraction from different solvents decreases in the order nitrobenzene >acetylacetone>1-butanol>toluene> benzene.     

Ion-pair extraction of uranyl ion from aqueous medium using crown ethers

Ion-pair extraction behaviour of uranyl ion from aqueous solutions was studied at pH 3.0 employing crown ethers viz. benzo 15 crown 5 (B15C5), 18 crown 6 (18C6), dibenzo 18 crown 6 (DB18C6), and dibenzo 24 crown 8 (DB24C8) in chloroform as the organic phase and picric acid as the organophilic counter anion. The stoichiometry of the extracted species corresponded to [UO₂(crown ether)_n]²⁺·[pic⁻]₂ where n=1.5 for benzo 15 crown 5 and 1 for 18 crown 6 as well as dibenzo 18 crown 6. Adducts of DB24C8 could not be observed as practically no extraction was possible using this reagent. The separation behaviour of fission products from an irradiated uranium target was also studied. An interesting observation on the separation of trivalent lanthanides from uranyl ion is reported.     

Analytical application of poly[dibenzo-18-crown-6] for column chromatographic separation of Nd(III) from Ce(III), U(VI) and other elements

This research is dedicated to the study of analytical application of poly[dibenzo-18-crown-6] for separation of Nd(III) from possible lanthanides, actinides and other metal ions. A simple and efficient column chromatographic method has been developed using poly [dibenzo-18-crown-6] as stationary phase and hippuric acid as a counter ion. The capacity of crown polymer for Nd(III) was found to be 0.55 ± 0.01 mmol/g. Nd(III) was quantitatively separated from Ce(III), U(VI) and other elements in binary as well as multicomponent mixtures. Separation yields were good and reproducible (±2 %). This method has important application for separation of Nd(III) from Ce(III) rapidly and selectively.     

Thermodynamic study of solvent extraction of 15-crown-5- and 18-crown-6-s-block metal ion complexes and tetraalkylammonium ions with picrate anions into chloroform

Enthalpy and entropy changes for ion-pair extractions of tetraalkylammonium ions (R(4)N(+)) with picrate anions, overall extractions of s-block metal picrates with 15-crown-5 (15C5) and 18-crown-6 (18C6) and the partition of 15C5 itself were determined between chloroform and water. The distribution behaviour of crown ethers and the extraction process of s-block metal picrates with the crown ethers are discussed in detail on molecular grounds from the thermodynamic point of view. Moreover, enthalpy and entropy changes for ion-pair extractions of 1:1 15C5- and 18C6-s-block metal ion complexes with picrate anions are calculated from these experimental thermodynamic parameters and the literature values for complex-formation reactions of the crown ethers with the s-block metal ions in water. Enthalpy and entropy changes are negative for overall extractions of all the s-block metal picrates with 15C5 and 18C6. The extractions of the metal picrates with 15C5 and 18C6 at 25 degrees are completely enthalpy driven. Plots of thermodynamic parameters for ion-pair extractions of R(4)NA vs. the number of carbon atoms of R(4)N(+) show a linear relationship. From these experimental data, contributions of a methylene group and an ether oxygen atom to the thermodynamic parameters of the ion-pair extraction of R(4)NA and the partition of the crown ethers, respectively, between chloroform and water were obtained. Enthalpy and entropy changes for ion-pair extractions of 15C5- and 18C6-s-block metal picrate complexes were compared with those of R(4)NA. A striking difference in the ion-pair extraction process was found between the crown ether complexes and R(4)NA.     

Conductometric studies of thermodynamics of complexation of Li+, Na+ and K+ ions with 4′,4″(5″)-di-tert-butyldibenzo-18-crown-6 in binary acetonitrile–nitromethane mixtures

The complexation reactions between 4′,4″(5″)-di-tert-butyldibenzo-18-crown-6 (DTBDB18C6) and Li⁺, Na⁺ and K⁺ ions were studied conductometrically in different acetonitrile–nitromethane mixtures at various temperatures. The formation constants of the resulting 1:1 complexes were calculated from the computer fitting of the molar conductance-mole ratio data at different temperatures. At 20 °C and in nitromethane solvent, the stability of the resulting complexes varied in the order K⁺ > Na⁺ > Li⁺. The enthalpy and entropy changes of the complexation reactions were evaluated from the temperature dependence of formation constants. It was found that the stability of the resulting complexes increased with increasing nitromethane in the solvent mixture. The TΔS° versus ΔH° plot of thermodynamic data obtained shows a fairly good linear correlation indicating the existence of enthalpy–entropy compensation in the complexation reactions. The ab initio studies calculated at B3LYP/6-31G level of theory, indicate the binding energy of complexes decreases with increasing cation size in the gas phase. In the solution phase, DTBDB18C6 preferentially forms complexes with the larger ions rather than the smaller ions because the solvation energies of the smaller ions are large enough to overcome and reverse the trends in gas phase complexation. The findings of this study suggest that the current understanding of the factors influencing the selectivity of metal ion complexation by crown ethers may be in need of revision.     

Complexes of the Lighter Lanthanoid Nitrates with 15-crown-5 and 18-crown-6 ethers: Synthesis and characterization

Complexes of lanthanoid trinitrates Ln(NO₃)₃ with 15-crown-5 ether 1 (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd) and with 18-crown-6 ether 2 (Ln = La, Ce, Pr, Nd) having a 1:1 stoichiometry as well as 4:3 complexes with 2 (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd) have been synthesized and characterized. All the isolated complexes are solvent free. At 170–220° the 1:1 complexes of 2 are quantitatively transformed into 4:3 complexes. X-Ray powder diagrams of the neodymium complexes with 2 indicate that both the 1:1 and 4:3 complexes are genuine compounds. All the 1:1 complexes show a characteristic IR. absorption band at 875–880 cm^?1 absent from both the spectra of the free ligands and of the 4:3 complexes. The spectroscopic properties (IR. and electronic spectra, fluorescence lifetimes) of the complexes and the low magnetic moments of the Ln(III) ions in the complexes with Ln = Ce-Eu are indicative of a strong interaction between the lanthanoid ions and the crown ethers 1 and 2 .     

Extraction of gallium(III) by 1-{[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl]methyl}-1H-1,2,4-triazole from hydrochloric acid solutions

The extraction of gallium(III) with 1-{[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2- yl]methyl}-1H-1,2,4-triazole from hydrochloric acid solutions into toluene was studied. It was found that gallium( III) was efficiently extracted from 5–10 M solutions of HCl by the anion-exchange mechanism. The following metal extraction order was determined in the above aqueous phase acidity range: Ga(III) > In(III) > Al(III). The concentration constants and the thermodynamic parameters of the reaction of gallium(III) extraction from 6 M solutions of HCl at 25 °C were calculated.     

Liquid-liquid extraction of some lanthanide metal ions by polyoxyalkylene systems

Polyoxyalkylene systems, namely, polypropylene glycol (PPG-1025), polyethylene glycol (PEG-600) and polybutadieneoxide (PBDO-700) dissolved in either nitrobenzene or 1,2-dichloroethane have been tested as prospective extractants for some lanthanide metal ions (Eu(3+), Pr(3+) and Er(3+)) from their aqueous solutions in the presence of picrate anions. The metal ions were quantified before and after extraction using the inductively coupled plasma emission spectrophotometry technique. The percent extraction and the distribution coefficients have indicated that pH of the aqueous phase, picrate concentration and the organic solvent are the major parameters that affect the extraction efficiency of the metal ions. The optimum pH range was found to be 3.5-5.5 and the picrate concentration should be as high as possible; however, a picrate concentration of about 0.05 M proved to be adequate for a near quantitative extraction. In all cases, nitrobenzene enhanced a higher percent extraction compared to 1,2-dichloroethane. The efficiency of the polyoxyalkylene systems to extract certain lanthanide metal ions was in the order PBDO-700>PPG-1025>PEG-600 when nitrobenzene was the organic solvent and in the order PPG-1025>PBDO-700 approximately PEG-600 when 1,2-dichloroethane used as the solvent in the organic phase. The extractability of PPG-1025 towards the lanthanide metal ions was in the order Pr(3+)>Eu(3+)>Er(3+) irrespective of the organic solvent used. The stoichiometry of the extracted polyoxyalkylene ion-pairs with the lanthanide metal ions has been estimated. Each mole of metal ions is associated with three moles of picrate anions and 13 to 14 moles of propyleneoxide units in the case of PPG-1025, and about 9 to 10 moles of ethyleneoxide units in the case of PEG-600 and 10 moles of butadieneoxide units in the case of PBDO-700.     

Synthesis of diazadibenzo‐18‐crown‐6 ligands with appended chromophoric and fluorophoric groups as potential metal ion chemosensors

Six new diazadibenzo‐18‐crown‐6 ligands substituted with two each of 8‐hydroxyquinoline (7), 8‐amino‐quinoline (attached through its C‐2 or C‐7 position) ( 12 and 13 ), 8‐methoxyquinoline ( 18 ), 5‐chloro‐8‐methoxyquinoline ( 19 ), and dansylamidoethyl ( 21 ) side arms were synthesized as potential metal ion chemosensors and potential reagents for the selective extraction of certain metal ions from aqueous solutions. Ligands 7, 12, 13, 18 , and 19 were synthesized by reductive amination of diazadibenzo‐18‐crown‐6 ( 5 ) and the appropriate quinolinecarboxaldehydes. Bis(dansylamidoethyl)‐substituted ligand 21 was synthesized by treating diazacrown ether 5 with N‐dansylaziridine ( 20 ).     

Study on complexation adsorption behavior of dibenzo-18-crown-6 immobilized on CPVA microspheres for metal ions

Dibenzo-18-crown-6 (DBC) was immobilized on crosslinked polyvinyl alcohol (CPVA) microspheres, resulting in polymer-supported crown ether DBC–CPVA. The complexation adsorption behaviors of DBC–CPVA microspheres towards diverse metal ions were investigated. The experimental results show that among alkali metal ions, the complexation adsorption ability of DBC–CPVA for K⁺ ion is the strongest, and crown ether-metal complex in 1:1 ratio is formed, exhibiting a high adsorption capacity. The adsorption capacities of alkali metal ions on DBC–CPVA are in the order: K⁺ ? Na⁺ > LI⁺ > Rb⁺ > Cs⁺. Among several divalent metal ions, DBC–CPVA exhibits stronger adsorption ability towards Zn²⁺ and Co²⁺ ions, and a “sandwich”-type complex is formed probably in a molar ratio of 2:1 between the immobilized DBC and Zn²⁺ ion as well as between the immobilized DBC and Co²⁺ ion. The adsorption capacities of the several divalent metal ions on DBC–CPVA are in the order: Zn²⁺ > Co²⁺ ? Cd²⁺ > Cu²⁺ > Ni²⁺ > Pb²⁺. The complexation adsorption is exothermic physical physisorption process, and raising temperature leads to the decrease of the adsorption capacity. At the same time, the entropy during the complexation adsorption decreases, so the adsorption process is driven by the decrease of enthalpy.