EXISTENCE AND UNIQUENESS OF SOLUTIONS FOR NONLINEAR BOUNDARY VALUE PROBLEMS OF VOLTERRA－HAMMERSTEIN TYPE INTEGRODIFFERENTIAL EQUATION

ＥＸＩＳＴＥＮＣＥＡＮＤＵＮＩＱＵＥＮＥＳＳＯＦＳＯＬＵＴＩＯＮＳＦＯＲＮＯＮＬＩＮＥＡＲＢＯＵＮＤＡＲＹＶＡＬＵＥＰＲＯＢＬＥＭＳＯＦＶＯＬＴＥＲＲＡ－ＨＡＭＭＥＲＳＴＥＩＮＴＹＰＥＩＮＴＥＧＲＯＤＩＦＦＥＲＥＮＴＩＡＬＥＱＵＡＴＩＯＮ￥ＷａｎｇＧ...     

An explicit formula for generalized potential polynomials and its applications

We define the generalized potential polynomials associated to an independent variable, and prove an explicit formula involving the generalized potential polynomials and the exponential Bell polynomials. We use this formula to describe closed type formulas for the higher order Bernoulli, Eulerian, Euler, Genocchi, Apostol-Bernoulli, Apostol-Euler polynomials and the polynomials involving the Stirling numbers of the second kind. As further applications, we derive several known identities involving the Bernoulli numbers and polynomials and Euler polynomials, and new relations for the higher order tangent numbers, the higher order Bernoulli numbers of the second kind, the numbers , the higher order Bernoulli numbers and polynomials and the higher order Euler polynomials and their coefficients.     

Regularity of d-measure

The modified lower box dimension can be redefined in terms of the d-measure [4]. In this note we prove a decomposition theorem for this measure and show that strong regularity can be interpreted as this d-measure regularity in Rⁿ. This revised version was published online in June 2006 with corrections to the Cover Date.     

D3-Modules

A right R-module M is called a D3-module, if M ₁ and M ₂ are direct summands of M with M = M ₁ + M ₂, then M ₁ ∩ M ₂ is a direct summand of M. Following the work of Bass on projective covers, we introduce the notion of D3-covers and provide new characterizations of several well-known classes of rings in terms of D3-modules and D3-covers.     

Moral responsibility for unprevented harm

That we are morally responsible for what we do willingly and knowingly is a commonplace. That our moral responsibility extends as far as to cover at least the intended consequences of our voluntary actions and perhaps also the ones we did not intend, but could or did foresee, is equally beyond dispute. But what about omissions? Are we, or can we be, (equally) morally responsible for the harm that has occured because we did not prevent it, even though we could have done so? Say, for all the enormous suffering, caused daily by famine, deprivation and curable diseases in the Third World countries?Moral intuitions and practices that one could consult in this matter seem to leave us in the dark. We regularly ascribe responsibility to people for harms resulting from their negligence or failure to fulfill professional duties. On the other hand, we tend to think that unless there is some evidence of the causal contribution that agents made to a harmful event and/or state, it is not really fair to blame it on them. And finally, to complicate things even more, most of us deny that omissions could effect anything (any change) in the world and consequently regard them as causally impotent (as well as possibly harmless).Most of the proposed solutions to this perplexing issue simply take negative moral responsibility for granted and then either try to revise our ordinary notion of causation accordingly or, alternatively, weaken the conditions for holding someone morally responsible. In the paper I present and defend the relative merits of the third approach, one sceptical of the notion of moral responsibility for the ‘outcomes’ of omissions. I try to show that for some identifiable core notion of moral responsibility and paradigmatic cases of omissions, the prospects for a happy marriage are rather slim.     

Enumerating disjunctions and conjunctions of paths and cuts in reliability theory

Let G=(V,E) be a (directed) graph with vertex set V and edge (arc) set E. Given a set P of source-sink pairs of vertices of G, an important problem that arises in the computation of network reliability is the enumeration of minimal subsets of edges (arcs) that connect/disconnect all/at least one of the given source-sink pairs of P. For undirected graphs, we show that the enumeration problems for conjunctions of paths and disjunctions of cuts can be solved in incremental polynomial time. Furthermore, under the assumption that P consists of all pairs within a given vertex set, we also give incremental polynomial time algorithm for enumerating all minimal path disjunctions and cut conjunctions. For directed graphs, the enumeration problem for cut disjunction is known to be NP-complete. We extend this result to path conjunctions and path disjunctions, leaving open the complexity of the enumeration of cut conjunctions. Finally, we give a polynomial delay algorithm for enumerating all minimal sets of arcs connecting two given nodes s₁ and s₂ to, respectively, a given vertex t₁, and each vertex of a given subset of vertices T₂.     

Concentration inequalities and laws of large numbers under epistemic and regular irrelevance

his paper presents concentration inequalities and laws of large numbers under weak assumptions of irrelevance that are expressed using lower and upper expectations. The results build upon De Cooman and Miranda’s recent inequalities and laws of large numbers. The proofs indicate connections between the theory of martingales and concepts of epistemic and regular irrelevance.     

Corrigendum to Simple-Direct-Modules

In this note we fix a gap in the proof of (7)?(1) of Theorem 4.3 in the paper “Simple-Direct-Modules, Communications in Algebra, Vol. 45 (2017), 3643–3652”.     

Simple-direct-modules

A right R-module M is called simple-direct-injective if, whenever, A and B are simple submodules of M with A?B, and B?^⊕M, then A?^⊕M. Dually, M is called simple-direct-projective if, whenever, A and B are submodules of M with M∕A?B?^⊕M and B simple, then A?^⊕M. In this paper, we continue our investigation of these classes of modules strengthening many of the established results on the subject. For example, we show that a ring R is uniserial (artinian serial) with J²(R) = 0 iff every simple-direct-projective right R-module is an SSP-module (SIP-module) iff every simple-direct-injective right R-module is an SIP-module (SSP-module).     

Boundary controllability for conservative PDEs

Boundary observability and controllability problems for evolution equations governed by PDEs have been greatly studied in the past years. However, the problems were studied on a case-by-case basis, only for some particular types of boundary controls, and, moreover, several unnatural restrictions concerning lower-order terms were used.Our goal here is to give a general approach for boundary controllability problems, which is valid for all evolution PDEs of hyperbolic or ultrahyperbolic type, all boundary controls for which the corresponding homogeneous problem is well-posed, and all well-posedness spaces for the homogeneous problem. The first example of such equations is the class of hyperbolic equations, but valid examples are also equations such as the Schroedinger equation and various models for the plate equation.This work is essentially based on some apriori estimates of Carleman's type obtained by the author in a previous paper [29].This research was partially supported by the National Science Foundation under Grant NSF-DMS-8903747.     

Study of the size-flux relation of pores and spots

Using the vector magnetic field data from the Huairou Solar Observing Station of National Astronomical Observatories, a statistical study on the size-flux relation of photospheric magnetic features without any assumption is given. The selected data here include mature sunspots, as well as protosunspot (with a partial penumbra) and pore. We studied not only their size-flux relations of pore, protosunspot and mature sunspot, but also that of umbra and penumbra of the mature sunspots. The size-flux relationship of mature sunspots and their umbra and penumbra is found to be in different indexes of power-law. No evident relations are found between size and flux of the pores and protosunspots. We found that there is a threshold of 1×1012 Wb or (3-4.03) × 107 km2 for the transition from a pore to a protospot. Such results may be useful for understanding the physical conditions and dynamical processes of magnetic flux tubes in solar plasma during sunspot's formation. In addition, their characteristic size is also given.     

Quenching Versus Blow-up

This paper is concerned with the semilinear heat equation u_t = Δu - u^{-q} in Ω × (0, T) under the nonlinear boundary condition \frac{∂u}{∂v} = u^p on ∂Ω × (0, T). Criteria for finite time quenching and blow-up are established, quenching and blow-up sets are discussed, and the rates of quenching and blow-up are obtained.     

关于高校科技管理队伍建设的思考

本文主要讨论了在社会主义市场经济体制下高校科学管理队伍建设的有关问题。     

Are the eigenvalues of the B‐spline isogeometric analysis approximation of −Δu = λu known in almost closed form?

We consider the B‐spline isogeometric analysis approximation of the Laplacian eigenvalue problem −Δu = λu over the d‐dimensional hypercube (0,1)^d. By using tensor‐product arguments, we show that the eigenvalue–eigenvector structure of the resulting discretization matrix is completely determined by the eigenvalue–eigenvector structure of the matrix arising from the isogeometric analysis approximation based on B‐splines of degree p of the unidimensional problem . Here, n is the mesh fineness parameter, and the size of is N(n,p) = n + p − 2. In previous works, it was established that the normalized sequence enjoys an asymptotic spectral distribution described by a function e_p(θ), the so‐called spectral symbol. The contributions of this paper can be summarized as follows:

1. the eigenvalues of are arranged in ascending order, ;
2. is a sequence of functions from [0,π] to , which depends only on p;
3. h = 1/n and θ_j,n = jπh for j = 1,…,n; and
4. is the remainder, which satisfies for some constant depending only on α and p. We also provide a proof of this expansion for α = 0 and j = 1,…,N(n,p) −(4p − 2), where 4p − 2 represents a theoretical estimate of the number of outliers .
5. We show through numerical experiments that, for p ≥ 3 and k ≥ 1, there exists a point θ( p,k) ∈ (0,π) such that vanishes on [0,θ( p,k)]. Moreover, as it is suggested by the numerics of this paper, the infimum of θ(p,k) over all k ≥ 1, say y_p, is strictly positive, and the equation holds numerically whenever θ_j,n < θ( p), where θ( p) is a point in (0,y_p] which grows with p.
6. For p ≥ 3, based on the asymptotic expansion in the above item 3, we propose a parallel interpolation–extrapolation algorithm for computing the eigenvalues of , excluding the outliers. The performance of the algorithm is illustrated through numerical experiments. Note that, by the previous item 4, the algorithm is actually not necessary for computing the eigenvalues corresponding to points θ_j,n < θ( p).

     

A new multicriteria approach for the analysis of efficiency in the Spanish olive oil sector by modelling decision maker preferences

The efficiency in production is often analysed as technical efficiency using the production frontier function. Efficiency scores are usually based on distance computations to the frontier in an m + s-dimensional space, where m inputs produce s outputs. In addition, efficiency improvements consider the total consumption of each input. However, in many cases, the “consumption” of each input can be divided into input-consumption sections (ICSs), and trade-off among the ICSs is possible. This share framework can be used for computing efficiency. This analysis provides information about both the total optimal consumption of each input, as does data envelopment analysis, and the most efficient allocation of the “consumption” among the ICSs. This paper studies technical efficiency using this approach and applies it to the olive oil sector in Andalusia (Spain). A non-parametrical methodology is presented, and an input-oriented Multi-Criteria Linear Programming model (MLP) is proposed. The analysis is developed at global, input and ICSs levels, defining the extent of satisfaction achieved at all these levels for each company, in accordance with their own preferences. The companies’ preferences are modelled with their utility function and their set of weights. MLP offers more detailed information to assist decision makers than other models previously proposed in the literature. In addition to this application, it is concluded that there is room for improvement in the olive oil sector, particularly in the management of the skilled labour. Additionally, the solutions with two opposite scenarios indicate that the model is suitable for the intended decision making process.