Splitless injection and the solvent effect

Splitless injection is based on the solvent effect as a mechanism condensing large vapour clouds down to infinitely shortened bands. The effect is controlled by the parameters column temperature, volatility and amount of solvent, and rate of injection. By properly selecting the variables the effect can easily be optimized for any combination of sample and column. It is the purpose of this paper to provide the mechanistic understanding as required for this optimization, as well as some rules for the experimental realization. Potentialities and limitations of splitless injection are discussed, and the role of the solvent effect in on-column injection is emphasized.     

Application of the “cooled needle” technique to split and splitless sampling onto capillary columns

Cooled needle sampling using syringes was applied to splitless injection and to simulated distillation analyses. Slight changes of the construction of the previous device are also described. The changes concern the temperature profile within the injector and especially the vaporization insert. Even with the low carrier gas flow through the injector during splitless injection, discrimination by component volatility can be avoided. Precision and accuracy of simulated distillation data obtained with split sampling also can be improved by the cooled needle technique.     

Splitless injection–development and state of the art. Including a comparison of matrix (“dirt”) effects in conventional and PTV splitless injection

Kurt Grob introduced splitless injection in 1969. He elaborated most of the working guidelines including the techniques required for reconcentrating the broad intial bands, i.e. the solvent effects and cold trapping. He also designed a vaporizing injector suited for splitless injection. Nevertheless, splitless injection is still often carried out using inappropriate conditions, and many of today's vaporizing injectors are not suited for splitless injection. No autosampler is available that introduces the sample at the appropriate position. Conventional splitless injection is compared to PTV splitless injection for the range of samples that cannot be handled by the anyway superior oncolumn injection, i.e. sample with high loads of involatile byproducts. There is a clear preference for PTV splitless injection as matrix effects observed in conventional splitless injection were found to be substantially reduced or even eliminated.     

The Mutation of the “Nobel Prize in Chemistry” into the “Nobel Prize in Chemistry or Life Sciences”: Several Decades of Transparent and Opaque Evidence of Change within the Nobel Prize Program

Over the past several decades, the Nobel Prize program has slowly but steadily been modified in both transparent and opaque ways. A transparent change has been the creation of the Nobel Prize in Economic Sciences, officially known as the Sveriges Riksbank Prize in Economic Sciences in Memory of Alfred Nobel. An opaque change has been the mutation of the Nobel Prize in Chemistry into what is effectively the “Nobel Prize in Chemistry or Life Sciences.” This paper presents a detailed study of this opaque change, including evidence that the disciplines of chemistry and biochemistry cover, today, intellectually quite distinct and generally scientifically‐unrelated intellectual territory. This paper supports the evolution of the Nobel Prizes, and encourages the Nobel Prize program to move from opaque to transparent change processes for the next generations of achievement in the sciences.     

Functional assessment of “in vivo” and “in silico” mutations in the guanine binding site of RNase T1: A DFT study

Experimentally, the functional assessment of amino acid side chains in proteins is carried out by comparing parameters such as binding constants for the wild‐type protein and a mutant protein in which the considered side chain is deleted. In the present study, we apply a density functional theory (DFT) methodology to obtain changes in binding energy upon mutations in the enzyme ribonuclease T₁. Mutant structures were either taken directly from crystallographic data (“in vivo”) allowing for conformational changes upon mutation, or derived from the wild‐type (“in silico”). Excluding entropic contributions, the computed interaction energy changes upon mutation in vivo correlate qualitatively well with experimental binding free energy changes. In contrast, the in silico approach does not perform as well, especially for residues that contribute largely to binding. Subsequently, we assessed the applicability of the in vivo approach by analyzing the functional cooperativity between pairs of side chains. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

Native ethylene glycol in wine: Application of a dead volume free,very fast “deans heart-cut” system on-line with multi-chromatography

Data about the existence of native HO? CH₂? CH₂? OH (MEG) in natural wines and champagne has led to delicate questions because of legal decisions already made to declare wine or champagne illegal for sale if the MEG concentrations found are above 10 mg/liter. Action has been taken because of the DEG (diethylene glycol) disaster in European wines of 1985…86. An incorrect legal decision was made due to the belief that MEG cannot be produced biochemically by grape vines. A further reason may be lack of correct data on native MEG trace concentrations, as a result of the special behavior of this diol. As first member of a homologous series whose higher members (C₄) are normally found in all wines at quite high concentration levels, MEG shows extremely adsorptive behavior. The solution of the chromatographic problems is summarized in this paper. MEG concentrations in Riesling as example are in the range of 2 to 6 mg/liter and can easily be increased by biotechnological steps to a level of around 10 to 60 mg/liter. This is again due to the specific adsorptive behavior of MEG, which can be enriched on filter surfaces and displaced when the wine acidity changes with changing types. In order to control and guarantee the qualitative and quantitative results of MEG analyses we used a combination of Deans heart cutting on-line with Multi-Chromatography. It was easy to produce false data by many otherwise useful single column or two-dimensional separation processes, etc.     

On the applicability of the “abt” concept

Kaiser's “abt” concept rests on the experimental establishment of a linear relation between band width at half height, b_0.5, and capacity ratio, k, according to His column specification quantity, h_real, is dependent on the square of the slope a, obtained from a linear regression analysis based on this relation. It is shown in the present paper that an improvement of the experimental conditions leading to a lower extra-column contribution to band broadening, b, introduces a tendency towards a negative curvature in the plot at low k values. The mean slope increases, and an uncritical linear regression would yield an h_real-value which is higher than before and which would be in the opposite direction to the requirements of a reliable column specification. Generally the linear regression analysis has to be moved to higher k regions in cases of curvature, especially as it is also shown that h_real is an estimation of the traditional HETP value, H∞, that would be obtained when k approaches infinity. This theoretically expected relation is a strong motivation for the use of h_real as a column specification, since the b_0.5-value associated with H∞ is expected to be practically independent of b.     

On the Origin of the “Giant” Electroclinic Effect in a “De Vries”‐Type Ferroelectric Liquid Crystal Material for Chirality Sensing Applications

W415 is a chiral smectic compound with a remarkably weak temperature dependence of its giant electroclinic effect in the liquid crystalline smectic A* phase. Furthermore it possesses a high spontaneous polarization in the smectic C* phase. The origin of this striking electroclinic effect is the co‐occurrence of a de Vries‐type ordering with a weak first‐order tilting transition (see the synchroton X‐ray scattering profiles).

     

Appraisal of “classic” and “novel” extraction procedure efficiencies for the isolation of polycyclic aromatic hydrocarbons and their derivatives from biotic matrices

In this study the extraction efficiency of pressurized liquid extraction (PLE), employing different extraction solvent mixtures under different extraction conditions, was compared with extraction efficiencies of commonly used procedures, Soxhlet extraction and extraction enhanced by sonication. Spruce needles and fish tissue were selected as test samples. Purification of obtained extracts was carried out by gel permeation chromatography (GPC) employing gel Bio-Beads S-X3. Identification and quantitation of target PAHs was performed by high-performance liquid chromatography with fluorescence detection (HPLC–FLD).

Within optimisation of PLE conditions, temperature of extraction, type of solvent, duration and number of static cycles as well as the influence of sample pre-treatment (drying, homogenisation, etc.) were tested. Comparison of the extraction efficiency of PLE with the efficiencies of the other techniques was done under the optimised conditions, i.e. sample slurry obtained by desiccation with anhydrous sodium sulphate, extracted at 100 °C in 1 cycle lasting 5 min. Hexane:acetone (1:1, v/v) was chosen as the most suitable extraction solvent for isolation of analytes from test samples.

Comparison of mentioned isolation techniques with respect to the amount of co-extracts, procedure blank levels and time and solvent volume demands was also done.     

Factors That Affect the Nature of the Final Oxidation Products in “Peroxo‐Shunt” Reactions of Iron–Porphyrin Complexes

The present study focuses on the oxidation of the water‐soluble and water‐insoluble iron(III)–porphyrin complexes [Fe^III(TMPS)] and [Fe^III(TMP)] (TMPS=meso‐tetrakis(2,4,6‐trimethyl‐3‐sulfonatophenyl)porphyrinato, TMP=meso‐tetrakis(2,4,6‐trimethylphenyl)porphyrinato), respectively, by meta‐chloroperoxybenzoic acid (m‐CPBA) in aqueous methanol and aqueous acetonitrile solutions of varying acidity. With the application of a low‐temperature rapid‐scan UV/Vis spectroscopic technique, the complete spectral changes that accompany the formation and decomposition of the primary product of O? O bond cleavage in the acylperoxoiron(III)–porphyrin intermediate [(P)Fe^III? OOX] (P=porphyrin) were successfully recorded and characterized. The results clearly indicate that the O? O bond in m‐CPBA is heterolytically cleaved by the studied iron(III)–porphyrin complexes independent of the acidity of the reaction medium. The existence of two different oxidation products under acidic and basic conditions is suggested not to be the result of a mechanistic changeover in the mode of O? O bond cleavage on going from low to high pH values, but rather the effect of environmental changes on the actual product of the O? O bond cleavage in [(P)Fe^III? OOX]. The oxoiron(IV)–porphyrin cation radical formed as a primary oxidation product over the entire pH range can undergo a one‐ or two‐electron reduction depending on the selected reaction conditions. The present study provides valuable information for the interpretation and improved understanding of results obtained in product‐analysis experiments.     

The “Facilitated Transition” hypothesis as an explanation for the gemdialkyl effect

A new technique of searching the conformational space of transition states was used to explore the cause of the rate acceleration in the gem-dialkyl effect in intramolecular cyclization reactions. Several previous hypotheses were discarded and a new hypothesis was advanced based on this new data. This hypothesis, the “Facilitated Transition” hypothesis, states that increased steric hindrance reduces the overall activation energy by facilitating rotation through the transition state. The older “Reactive Rotamer” hypothesis was eliminated by generating all conformations of the starting materials using the and computer programs and demonstrating that no relationship is found between rate increase and a change in the concentration of “reactive rotamers”.