Asymmetric hydrogenation of prochiral olefins catalysed by furanoside thioether-phosphinite Rh(I) and Ir(I) complexes

Thioether-phosphinite ligands (P-SR, R = Ph, Pr(I) and Me) bearing substituents with different steric demands on the sulfur centre were tested in the rhodium- and iridium-catalysed asymmetric hydrogenation of prochiral olefins. High enantiomeric excesses (up to 96%) and good activities (TOF up to 860 mol product x (mol catalyst precursor x h)(-1)) were obtained for alpha-acylaminoacrylates derivatives. Our results show that enantiomeric excesses depended strongly on the steric properties of the substituent in the thioether moiety, the metal source and the substrate structure. A bulky group in the thioether moiety along with the metal Rh had a positive effect on enantioselectivity. Reaction of these chiral ligands with [M(cod)2]BF4(M = Ir, Rh; cod = 1,5-cyclooctadiene) yielded complexes [M(cod)(P-SR)]BF4, which were present in only one diastereomeric form having the sulfur substituent in a pseudoaxial disposition. The addition of H2 to iridium complexes gave the cis-dihydridoiridium(iii) complexes [IrH2(cod)(P-SR)]BF4. For complexes [IrH2(cod)(P-SPh)]BF4 and [IrH2(cod)(P-SMe)] only one isomer was present in solution. However, for the complex [IrH2(cod)(P-Si-Pr)]BF4, which contained the more hindered substituent on sulfur, two isomers were detected. In all cases there was a pseudoaxial disposition of the sulfur substituents.     

Scope and mechanism of the intermolecular addition of aromatic aldehydes to olefins catalyzed by Rh(I) olefin complexes

Rhodium (I) bis-olefin complexes Cp*Rh(VTMS)(2) and CpRh(VTMS)(2) (Cp* = C(5)Me(5), Cp = C(5)Me(4)CF(3), VTMS = vinyl trimethylsilane) were found to catalyze the addition of aromatic aldehydes to olefins to form ketones. Use of the more electron-deficient catalyst CpRh(VTMS)(2) results in faster reaction rates, better selectivity for linear ketone products from alpha-olefins, and broader reaction scope. NMR studies of the hydroacylation of vinyltrimethylsilane showed that the starting Rh(I) bis-olefin complexes and the corresponding Cp*/Rh(CH(2)CH(2)SiMe(3))(CO)(Ar) complexes were catalyst resting states, with an equilibrium established between them prior to turnover. Mechanistic studies suggested that CpRh(VTMS)(2) displayed a faster turnover frequency (relative to Cp*Rh(VTMS)(2)) because of an increase in the rate of reductive elimination, the turnover-limiting step, from the more electron-deficient metal center of CpRh(VTMS)(2). Reaction of Cp*/Rh(CH(2)CH(2)SiMe(3))(CO)(Ar) with PMe(3) yields acyl complexes Cp*/Rh[C(O)CH(2)CH(2)SiMe(3)](PMe(3))(Ar); measured first-order rates of reductive elimination of ketone from these Rh(III) complexes established that the Cp ligand accelerates this process relative to the Cp* ligand.     

Enantioselective hydrogenation of functionalized olefins catalyzed by Rh-chiral bidentatephosphite complexes

A novel catalytic system for the hydrogenation of dimethyl itaconate has been developed by using rhodium–diphosphite complexes. These chiral diphosphite ligands were derived from glucopyranoside, d-mannitol derivatives, and binaphthyl or H₈-binaphthyl phosphochloridites. The ligands based on the methyl 3,6-anhydro-α-d-glucopyranoside backbone and (R)- and (S)-binaphthol and/or (R)- and (S)-2,2′-dihydroxy-5,5′,6,6′,7,7′,8,8′-octahydro-1,1′-binaphthol gave almost complete conversion of the dimethyl itaconate and both enantiomers of dimethyl 2-methylsuccinate with excellent enantioselectivities. The stereochemically matched combination of methyl 3,6-anhydro-α-d-glucopyranoside and H₈-(S)-binaphthyl in ligand 2,4-bis{[(S)-1,1′-H₈-binaphthyl-2,2′-diyl]-phosphite} methyl 3,6-anhydro-α-d-glucopyranoside was essential to afford dimethyl 2-methylsuccinate with up to 98% ee. The sense of the enantioselectivity of products was predominantly determined by the configuration of the biaryl moieties of the ligands. An initial screening of [Rh(cod)₂]BF₄ with these ligands in the hydrogenation of (E)-2-(3-butoxy-4-methoxybenzylidene)-3-methylbutanoic acid was carried out. Good enantioselectivity (75% ee) and low yield for (R)-2-(3-butoxy-4-methoxybenzyl)-3-methylbutanoic acid were obtained.     

Asymmetric transfer hydrogenation of ketones catalyzed by phosphine-rhodium(I) and -iridium(I) complexes

The asymmetric hydrogen transfer from propan-2-ol to prochiral ketones is effectively catalyzed by diphosphine complexes of iridium and rhodium. The influence of the reaction conditions on the activity and selectivity of the catalysts has been investigated.     

Regioselective hydrophenylation of olefins catalyzed by an Ir(III) complex

The novel, anti-Markovnikov, arylation of olefins with benzene to produce straight-chain alkylbenzenes with higher selectivity than branched alkylbenzenes is catalyzed by [Ir(μ-acac-O,O′,C³)(acac-O,O′)(acac-C³)]₂ (acac=acetylacetonato), 1 [J. Am. Chem. Soc. 122 (2000) 7414]. The reaction of benzene with propylene gave n-propylbenzene and cumene in 61 and 39% selectivities, respectively. The reaction of benzene and styrene afforded 1,2-diphenylethane in 98% selectivity. Considering the anti-Markovnikov regioselectivity and lack of inhibition by water, we propose that the reaction does not proceed via a Friedel–Crafts, carbocation, mechanism. Complex 1, amongst the various transition metal complexes examined, is the most efficient for catalyzing the anti-Markovnikov olefin arylation. The crystal structure of complex 1 was solved and is consistent with a binuclear Ir(III) structure with three different types of coordinated acac ligands as reported by earlier solution IR and NMR analyses. [Ir(μ-acac-O,O′,C³)(acac-O,O′)Cl]₂, 2, was prepared by the reaction of complex 1 with benzoyl chloride, and the crystal structure was also reported.     

Kinetic studies of cyclohexane hydrogenation catalyzed by the Rh(I) compounds with 2-aminopyridine

The kinetics of homogeneous hydrogenation of cyclohexene in the presence of the catalytic Rh₂Cl₂(C₈H₁₄)₄ + 2-aminopyridine has been investigated (C₈H₁₄ = cyclooctene). The rate of reaction may be expressed as

At 30 °C the equilibrium constants are: K₁ = 862 mol⁻¹ l, K₂ = 4.9 mol⁻¹ l and rate constant k = 14.0 mol⁻¹ l s⁻¹. The activation parameters are: E_a = 26.9 kJ mol⁻¹, ΔH^≠ = 24.4 kJ mol⁻¹, ΔS^≠ = − 135.9 J K⁻¹ mol⁻¹. The catalyst is about 10 times more active in the hydrogenation of cyclohexene than RhCl (PPh₃)₃.     

Synthesis and properties of Rh(I) and Ir(I) distibine complexes with organometallic co-ligands

The first series of Rh(I) distibine complexes with organometallic co-ligands is described, including the five-coordinate [Rh(cod)(distibine)Cl], the 16-electron planar cations [Rh(cod)(distibine)]BF4 and [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 and the five-coordinate [Rh(CO)(distibine)2][Rh(CO)2Cl2] (distibine=R2Sb(CH2)3SbR2, R=Ph or Me, and o-C6H4(CH2SbMe2)2). The corresponding Ir(I) species [Ir(cod)(distibine)]BF4 and [Ir{Ph2Sb(CH2)3SbPh2}2]BF4 have also been prepared. The complexes have been characterised by 1H and 13C{1H} NMR and IR spectroscopy, electrospray mass spectrometry and microanalysis. The crystal structure of the anion exchanged [Rh(CO){Ph2Sb(CH2)3SbPh2}2]PF(6).3/4CH2Cl2 is also described. The methyl-substituted distibine complexes are less stable than the complexes of Ph2Sb(CH2)3SbPh2, with C-Sb fission occurring in some of the complexes of the former. The salts [Rh(CO){Ph2Sb(CH2)3SbPh2}2]PF6 and [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 undergo oxidative addition with Br2 to give the known [RhBr2{Ph2Sb(CH2)3SbPh2}2]+, while using HCl gives the same hydride complex from both precursors, which is tentatively assigned as [RhHCl2{Ph2Sb(CH2)3SbPh2}]. An unexpected further Rh(III) product from this reaction, trans-[RhCl2{Ph2Sb(CH2)3SbPh2}{PhClSb(CH2)3SbClPh}]Cl, was identified by a crystal structure analysis and represents the first structurally characterised example of a chlorostibine coordinated to a metal. [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 reacts with CO to give [Rh(CO){Ph2Sb(CH2)3SbPh2}2]BF4 initially, and upon further exposure this species undergoes further reversible carbonylation to give a cis-dicarbonyl species thought to be [Rh(CO)2{Ph2Sb(CH2)3SbPh2}{kappa1Sb-Ph2Sb(CH2)3SbPh2}]BF4 which converts back to the monocarbonyl complex when the CO atmosphere is replaced with N2.     

Efficient asymmetric transfer hydrogenation of activated olefins catalyzed by ruthenium amido complexes

The asymmetric transfer hydrogenation of activated olefins with chiral ruthenium amido complexes (Noyori catalyst) using formic acid-triethylamine azeotrope as hydrogen source resulted in excellent yields and high enantioselectivities (up to 88.5%).     

铱(I)联萘胺Schiff碱(BPMBNDI)配合物催化苯乙酮的不对称氢转移反应

用旋光活性2, 2'-(1, 1'-联萘)二胺和2-吡啶基甲醛缩合得到的Schiff碱BPMBNDI[N, N'-二(2-吡啶基亚甲基)-(1, 1'-联萘)-2, 2'-二亚胺]为配体与[Ir(COD)Cl]2(COD=1, 5-环辛二烯)反应, 生成了10个光学活性铱配合物。研究它们在异丙醇对苯乙酮不对称氢转移反应中的光学诱导活性时, 发现10个催化剂均具有较高的立体选择性,其中[Ir(COD)(BPMBNDI)I]催化的光学产率高达84%。     

Oxidative coupling of NH isoquinolones with olefins catalyzed by Rh(III)

Rh(III)-catalyzed oxidative coupling reactions between isoquinolones with 3-aryl groups and activated olefins have been achieved using anhydrous Cu(OAc)(2) as an oxidant to give tetracyclic products. The nitrogen atom acts as a directing group to facilitate ortho C-H activation. This reaction can be one-pot starting from methyl benzohydroxamates, without the necessity of the isolation of isoquinolone products. A broad scope of substrates has been demonstrated, and both terminal and internal activated olefins can be applied. In the coupling of N-methylmaleimide, a Wacker-like mechanism was proposed, where backside attack of the NH group in isoquinolones is suggested as a key step. Selective C-H activation has also been achieved at the 8-position of 1-naphthol, leading to an olefination product.     

Enantioselective transfer hydrogenation catalyzed by iridium(I) complexes with nitrogen donor ligands

The reduction of prochiral ketones by hydrogen transfer from isopropanol is catalyzed by cationic iridium(I) complexes containing optically active Schiff bases. Optical yields of up to 33% have been obtained.     

Mechanism of homogeneous Ir(III) catalyzed regioselective arylation of olefins

The mechanism of hydroarylation of olefins by a homogeneous Ph-Ir(acac)(2)(L) catalyst is elucidated by first principles quantum mechanical methods (DFT), with particular emphasis on activation of the catalyst, catalytic cycle, and interpretation of experimental observations. On the basis of this mechanism, we suggest new catalysts expected to have improved activity. Initiation of the catalyst from the inert trans-form into the active cis-form occurs through a dissociative pathway with a calculated DeltaH(0 K)() = 35.1 kcal/mol and DeltaG(298 K)() = 26.1 kcal/mol. The catalytic cycle features two key steps, 1,2-olefin insertion and C-H activation via a novel mechanism, oxidative hydrogen migration. The olefin insertion is found to be rate determining, with a calculated DeltaH(0 K)() = 27.0 kcal/mol and DeltaG(298 K)() = 29.3 kcal/mol. The activation energy increases with increased electron density on the coordinating olefin, as well as increased electron-donating character in the ligand system. The regioselectivity is shown to depend on the electronic and steric characteristics of the olefin, with steric bulk and electron withdrawing character favoring linear product formation. Activation of the C-H bond occurs in a concerted fashion through a novel transition structure best described as an oxidative hydrogen migration. The character of the transition structure is seven coordinate Ir(V), with a full bond formed between the migrating hydrogen and iridium. Several experimental observations are investigated and explained: (a) The nature of L influences the rate of the reaction through a ground-state effect. (b) The lack of beta-hydride products is due to kinetic factors, although beta-hydride elimination is calculated to be facile, all further reactions are kinetically inaccessible. (c) Inhibition by excess olefin is caused by competitive binding of olefin and aryl starting materials during the catalytic cycle in a statistical fashion. On the basis of this insertion-oxidative hydrogen transfer mechanism we suggest that electron-withdrawing substituents on the acac ligands, such as trifluoromethyl groups, are good modifications for catalysts with higher activity.     

手性双胺双膦-铱体系催化芳香酮的高对映选择性氢转移氢化

在异丙醇溶液中,从[Ir(COD)Cl]2和C2-对称的手性双胺双膦配体原位制备了手性能-Ir(Ⅰ)配合物,并直接用于催化几种芳香酮的不对称氢转移氢化。结果表明,该配合物是异丙基苯基酮不对称转移氢化的优秀催化剂,当底物酮与催化剂的摩尔比(S/C)为1200:1时,在室温下反应4h后,得到相应的手性芳香醇的转化率和对映选择性分别高达98%和98%ee.     

Addition of S-H bonds across electron-deficient olefins catalyzed by well-defined copper(I) thiolate complexes

A series of monomeric (NHC)Cu(SR) (R = Ph or CH2Ph; NHC = N-heterocyclic carbene) complexes have been synthesized and fully characterized including single-crystal X-ray diffraction studies. These complexes catalyze the addition of S-H bonds across electron-deficient olefins to regioselectively produce "anti-Markovnikov" products.     

Asymmetric transfer hydrogenation of aromatic ketones by Rh(I)/bimorpholine complexes

The asymmetric hydride transfer reduction of aromatic ketones, using a [Rh(cod)Cl]₂ complex as a catalyst and (3S,3′S)-bimorpholine as a chiral ligand, was studied. By varying the amount of ligand, basic co-catalyst and temperature, high yields (>90%) and good enantiomeric excesses of the alcohols (ee up to 83%) were achieved.     

Asymmetric hydrogenation of aromatic olefins catalyzed by iridium complexes of proline derived phosphine-oxazoline ligands

The synthesis of a series of phosphine-oxazoline ligands is reported. This ligands are synthesized by reaction of a phosphine chloride with the secondary nitrogen of proline. Upon coordination to iridium the resulting complexes can be used in the asymmetric hydrogenation of simple olefins. The effect of different counter ions and substitution at the oxazoline and the phosphine is reported.     

Asymmetric hydrogenation of alpha-hydroxy ketones catalyzed by MsDPEN-Cp*Ir(III) complex

Asymmetric hydrogenation of a series of alpha-hydroxy aromatic ketones in methanol catalyzed by Cp*Ir(OTf)(MsDPEN) (MsDPEN = N-(methanesulfonyl)-1,2-diphenylethylenediamine) affords the 1-aryl-1,2-ethanediols in up to 99% ee. The reaction can be conducted with a substrate-to-catalyst molar ratio as high as 6000 under 10 atm of H2. 1-hydroxy-2-propanone is also hydrogenated with high enantioselectivity.