Facile solid phase synthesis of N-cycloguanidinyl-formyl peptides

A novel strategy of solid phase synthesis of N-cycloguanidinyl-formyl peptides has been established and investigated which involved coupling orthogonal protected diaminoacid with resin bound peptide, α-amino group deprotection, guanidinylation of α-amino group by bis-Cbz-1H-pyrazole-1-carboxamidine followed by cleavage and cyclization in solution, and finally removing Cbz by palladium catalyzed hydrogenation. Through this method, cycloguanidine could be introduced to either N-terminus or sidechain of designated peptides. The reaction conditions were facile, straightforward, and totally adaptive to common solid phase peptide synthesis strategy.     

An efficient strategy for the preparation of one-bead-one-peptide libraries on a new biocompatible solid support

A new strategy for the preparation of one-bead-one-peptide libraries compatible with solid-phase screening and subsequent detachment of the peptide from the resin for sequence determination by mass spectrometry is described. The method is based on the use of ChemMatrix, a novel, totally PEG-based resin, together with 4-hydroxymethylbenzoic acid linker. After peptide elongation, which was carried out using the Fmoc/t-Bu approach, the side-chain protecting groups were removed with TFA solution. The library was then screened, and peptides were detached from the positive beads with ammonia/THF vapor. Finally, the peptide sequences were determined by MS/MS.     

Fluorescence-quenched solid phase combinatorial libraries in the characterization of cysteine protease substrate specificity

To map the substrate specificity of cysteine proteases, two combinatorial peptide libraries were synthesized and screened using the archetypal protease, papain. The use of PEGA resin as the solid support for library synthesis facilitated the application of an on-resin fluorescence-quenched assay. Results from the screening of library 2 indicated a preference for Pro or Val in the S3 subsite and hydrophobic residues in S2; the most prevalent residue not being Phe but Val. The S1 subsite exhibited a dual specificity for both small, nonpolar residues, Ala or Gly, as well as larger, Gln, and charged residues, Arg. Small residues predominated in the S1'-S4' subsites. Active peptides from the libraries and variations thereof were resynthesized and their kinetics of hydrolysis by papain assessed in solution phase assays. Generally, there was a good correlation between the extent of substrate cleavage on solid phase and the kcat/KM's obtained in solution phase assays. Several good substrates for papain were obtained, the best substrates being Y(NO2)PMPPLCTSMK(Abz) (kcat/KM = 2109 (mM s)-1), Y(NO2)PYAVQSPQK(Abz) (kcat/KM = 1524 (mM s)-1), and Y(NO2)PVLRQQRSK(Abz) (kcat/KM = 1450 (mM s)-1). These results were interpreted in structural terms by the use of molecular dynamics (MD). These MD calculations indicated two different modes for the binding of substrates in the narrow enzyme cleft.     

Endo- and aminopeptidase activities of rat cathepsin H.

Employing soluble denatured protein substrates and their derivatives, the proteolytic activity of rat cathepsin H was investigated. The enzyme showed aminopeptidase activity which sequentially released amino acid from the N-terminal of the substrate. The aminopeptidase activity did not act on N alpha-acetylated peptides and showed moderate ionic-strength dependence when methionyl-methylcoumarylamide was employed as a substrate. These results indicate that the activity essentially requires an N-terminal free amino group of the substrate and recognizes it electrostatically to some extent. On the other hand, the enzyme was also indicated to exhibit endopeptidase activity by employing appropriate N alpha-acetylated peptide substrates. In contrast to the aminopeptidase activity, the endopeptidase activity showed rather strict specificity, preferring hydrophobic residues at P2 and P3 sites. Because of the broad specificity and high efficiency of the aminopeptidase activity, it was difficult to directly observe endopeptidase activity in the digestion of large peptide substrates with a free alpha-amino terminal. Thus, this is the first experimental evidence that indicates endopeptidase activity by assigning internal peptide bonds cleaved by this activity. From this data, we proposed a model of the binding site of this enzyme.     

Comparison on effect of hydrophobicity on the antibacterial and antifungal activities of α-helical antimicrobial peptides

HPRP-A1, a 15-mer α-helical cationic peptide, was derived from N-terminus of ribosomal protein L1 (RpL1) of Helicobacter pylori. In this study, HPRP-A1 was used as a framework to obtain a series of peptide analogs with different hydrophobicity by single amino acid substitutions in the center of nonpolar face of the amphipathic helix in order to systematically study the effect of hydrophobicity on biological activities of -helical antimicrobial peptides. Hydrophobicity and net charge of peptides played key roles in the biological activities of these peptide analogs; HPRP-A1 and peptide analogs with relative higher hydrophobicity exerted broad spectrum antimicrobial activity against Gram-negative bacteria, Gram-positive bacteria and pathogenic fungi, but also showed stronger hemolytic activity; the change of hydrophobicity and net charge of peptides had similar effects with close trend and extent on antibacterial activities and antifungal activities. This indicated that there were certain correlations between the antibacterial mode of action and the antifungal mode of action of these peptides in this study. The peptides exhibited antimicrobial specificity for bacteria and fungi, which provided potentials to develop new antimicrobial drugs for clinical practices.     

Introduction of the Aib-Pro unit into peptides by means of the ‘azirine/oxazolone method’ on solid phase

A method for the direct introduction of Aib-Pro into peptides on solid phase was developed. The Aib-Pro unit was introduced by means of the ‘azirine/oxazolone method’ using allyl N-(2,2-dimethyl-2H-azirin-3-yl)-l-prolinate as the synthon. After the reaction of the resin-bound amino or peptide acid with allyl N-(2,2-dimethyl-2H-azirin-3-yl)-l-prolinate, the allyl protecting group of the resulting extended peptide could be removed by a mild Pd⁰-promoted procedure. Cleavage of the peptide from the resin was performed with UV light at 352 nm and yielded C-terminal protected peptides. The method found a successful application in the syntheses of different Aib-Pro containing peptaibol segments. Furthermore, a protected derivative of the peptide antibiotic Trichovirin I 1B was prepared by segment condensation.     

Synthesis of cyclic peptides via O-N-acyl migration

We describe here a novel and convenient synthesis of head-to-tail cyclic peptide avoiding racemization. Linear depsipeptides including a serine residue as the key element for ester bond formation and acyl transfer were synthesized on 2-chlorotrityl chloride resin. After cleavage from the resin, intramolecular head-to-tail cyclization was performed in solution by C-terminal activation of urethane protected O-acyl serine residue. After removal of the N^α-serine protecting group, the final step consisted in O-N-acyl migration reaction on the ‘switch’ or ‘click’ element to restore native cyclic peptides.     

Monitoring the large-scale production of the antihypertensive peptides RYLGY and AYFYPEL by HPLC-MS

This work reports the quantitative analysis of two novel antihypertensive peptides α_s1-CN f(90-94), with sequence RYLGY, and α_s1-CN f(143-149), with sequence AYFYPEL, by high-performance liquid chromatography–mass spectrometry in food-grade hydrolysates of milk proteins. The method was validated and showed sufficient specificity, reproducibility, linearity and recovery. Linear calibrations of the molecular ions m/z 671.2 and 902.3 were selected for the determination of the peptides RYLGY and AYFYPEL, respectively, and showed good statistical results (R ² ≥ 0.995 and with no significant lack-of-fit). The simplicity of RP-HPLC-MS method allowed the automated quantification of both antihypertensive peptides without any sample pretreatment. The application of this method permitted the evaluation of some hydrolysis variables, i.e., substrate, temperature, hydrolysis time or enzyme/substrate ratio, on the formation of antihypertensive peptides. The quantitative analysis of RYLGY and AYFYPEL showed that ultrafiltration was not effective to improve the content in active peptides, containing the hydrolysates and their respective permeates similar peptide amounts.     

A modular assembly strategy for improving the substrate specificity of small catalytic peptides

In contrast to large proteins, small peptide catalysts typically display limited specificity for small molecule substrates. This is presumably a result of the limited opportunities small peptides have to fold in a manner that provides for the formation of an isolated reaction vessel that effectively binds and sequesters substrates from bulk solvent while at the same time catalyzing their transformation. For the preparation of small peptide catalysts that possess improved substrate specificity, we have developed a modular assembly strategy that involves appending phage display-derived substrate binding-domain modules to catalytically active peptide domains. We demonstrate the potential of this strategy with the construction of a small 35-amino acid residue aldolase peptide with improved substrate specificity. The advantages of this approach are that it reduces the demand on the functionalization of the catalytic site and it is modular, therefore making its adaptation to a variety of specificities rapid. The modular assembly strategy studied here may present advantages over exhaustive searches of large random-sequence peptide libraries for peptides with singular function.     

New cyclic RGD peptides: synthesis,characterization, and theoretical activity towards αvβ3 integrin

Two new cyclic RGD peptides were prepared using a click chemistry approach. The linear RGDfV peptide was synthesized by solid-phase peptide synthesis using a 9-fluorenylmetoxicarbonyl (Fmoc) strategy and a 2-chlorotrityl chloride resin. After coupling 5-hexynoic acid the peptide was cleaved from the resin and linked to propargylamine. The bis-alkynyl RGDfV peptide was then reacted with two different bis-azides by treatment with copper iodide and triethylamine. These two cyclic RGD peptides were characterized by NMR and HRMS. In order to evaluate the interaction of these new compounds with integrin α_vβ₃ docking experiments were carried out and the results compared with those obtained with cyclo(RGDf[N–Me]V) (Cilengitide). The two new cyclic RGD peptides showed a higher affinity to the α_vβ₃ integrin when compared with Cilengitide thus representing two new potential integrin α_vβ₃ antagonists.     

血红蛋白片段的合成及生物活性

采用多肽固相合成方法, 以Wang 树脂为载体, Fmoc为N-端氨基酸保护基, HOBt-HBTU为缩合试剂, 合成了一系列血红蛋白α链的片段, 产物经RP-HPLC和质谱进行了确定. 生物活性研究结果表明, 该系列多肽具有较高的血管紧张素Ⅰ转换酶抑制活性, 但不具有α-葡萄糖苷酶抑制活性.     

Hydrogen atom scrambling in selectively labeled anionic peptides upon collisional activation by MALDI tandem time-of-flight mass spectrometry

We have previously shown that peptide amide hydrogens undergo extensive intramolecular migration (i.e., complete hydrogen scrambling) upon collisional activation of protonated peptides (Jørgensen et al. J. Am. Chem. Soc. 2005, 127, 2785–2793). The occurrence of hydrogen scrambling enforces severe limitations on the application of gas-phase fragmentation as a convenient method to obtain information about the site-specific deuterium uptake for proteins and peptides in solution. To investigate whether deprotonated peptides exhibit a lower level of scrambling relative to their protonated counterparts, we have now measured the level of hydrogen scrambling in a deprotonated, selectively labeled peptide using MALDI tandem time-of-flight mass spectrometry. Our results conclusively show that hydrogen scrambling is prevalent in the deprotonated peptide upon collisional activation. The amide hydrogens (¹H/²H) have migrated extensively in the anionic peptide, thereby erasing the original regioselective deuteration pattern obtained in solution.     

N-Alkyl cysteine-assisted thioesterification of peptides

A new method for the preparation of peptide thioester by the post-solid phase peptide synthesis (SPPS) approach was developed. A series of N-alkyl cysteine derivatives were prepared and used as the C-terminus residue of the peptides prepared by the Fmoc SPPS. The synthetic peptides released from resin by TFA were readily converted to the peptide thioester in aqueous 3-mercaptopropionic acid (MPA) without significant side reactions.     

Enzymatic coupling of specific peptides at nonspecific ligation sites: effect of Asp189Glu mutation in trypsin on substrate mimetic-mediated reactions

Two main drawbacks seriously restrict the synthetic value of proteases as reagents in peptide fragment coupling: (i) native proteolytic activity and, thus, risk of undesired peptide cleavage; (ii) limited enzyme specificities restricting the amino acid residues between which a peptide bond can be formed. While the latter can be overcome by the use of substrate mimetics achieving peptide bond formation at nonspecific ligation sites, the risk of proteolytic cleavage still remains and hinders the wide acceptance of this powerful strategy for peptide coupling. This paper reports on the effect of the trypsin point mutant Asp189Glu on substrate mimetic-mediated reactions. The effect of this mutation on the steady-state hydrolysis of substrate mimetics of the 4-guanidinophenyl ester type and on trypsin-specific Lys- and Arg-containing peptides was investigated. The results were confirmed by enzymatic coupling reactions using substrate mimetics as the acyl donor and specific amino acid-containing peptides as the acyl acceptor. The competition assay verifies the predicted shift in substrate preference from Lys and Arg to the substrate mimetics and, thus, from cleavage to synthesis of peptide bonds. The combination of results obtained qualifies the trypsin mutant D189E as the first substrate mimetic-specific peptide ligase.     

Identification of a potent peptide deformylase inhibitor from a rationally designed combinatorial library

Peptide deformylase catalyzes the removal of the N-terminal formyl group from nascent polypeptides during prokaryotic protein synthesis and maturation and is essential for bacterial survival. Its apparent absence from mammalian organisms makes it an attractive target for designing novel antibacterial agents. Based on the substrate specificity of peptide deformylase from Escherichia coli, a focused library of peptide thiols was synthesized on TentaGel resin using a disulfide linkage. Screening of the library against the purified deformylase was carried out in solution phase after the inhibitors were released from the resin with a reducing agent. A potent deformylase inhibitor was obtained from a 750-member library and was further optimized through rational modification into a low nanomolar inhibitor (KI = 15 nM against E. coli deformylase).     

Metal remediation and preconcentration using immobilized short-chain peptides composed of aspartic acid and cysteine

Short-chain peptides (two and seven residues) consisting of a glycine (Gly) attachment group and various combinations of cysteine (Cys) and/or aspartic acid (Asp) were synthesized by Fmoc solid phase peptide synthesis (SPPS) on Tentagel resin. One selected peptide was synthesized on controlled pore glass (CPG) for comparison. The objective was to evaluate metal binding capacities and selectivities of short-chain peptides when minor alterations in the amino acid sequences were made. Metal binding of Ni²⁺, Cd²⁺, Co²⁺, and Mg²⁺ to the synthesized peptides was evaluated using breakthrough curves from a packed microcolumn and flame atomic absorption spectrophotometry (FAAS) detection. Peptides composed primarily of Asp showed single metal capacities as large as 720 μmol metal/g Tentagel resin and 130 μmol metal/g CPG. Simultaneous elution of a multi-metal solution demonstrated that peptides possessing only two Cys residues and four Asp residues were sufficient to yield selective binding of Cd²⁺ over Ni²⁺ and Co²⁺ similar to the selectivity of a six-Cys residue chain but with 60% more Cd²⁺ capacity. Interestingly, peptides supported on Tentagel resin appeared to reach equilibrium with metal-containing influent flow rates of at most 2 ml/min (or a linear velocity of 11 cm/s) and is attributed to better mass transport with the resin than with the CPG. Conditional stability constants calculated for the six-Asp residue chain and each metal showed the majority of sites having a log K in the range of 4.6-4.8. The peptides studied were also able to efficiently preconcentrate solutions containing as little as 0.05 μg/ml Cd²⁺ or Ni²⁺ in an artificial seawater matrix. Uniquely, the seven residue peptides showed surprisingly high metal capacities and metal-to-residue binding ratios (reaching ∼1:2), and are an order of magnitude better than results previously obtained for longer chain polyamino acids (50-70 residues) attached to CPG via silane chemistry.     

Identifying ligand-binding specificity of the oligopeptide receptor OppA from Bifidobacterium longum KACC91563 by structure-based molecular modeling

As a ATP-binding cassette (ABC) transporter the OppA receptor plays key roles in protecting the host organism and transporting nutrients across the intestine by the oligopeptide transporter from symbiotic bacteria and directs maturation of the host immune system. Among lactic acid bacteria, Bifidobacterium longum KACC91563, isolated from fecal samples of healthy Korean neonates, has the capability to alleviate food allergy effects. Operating as a peptide importer, the extracellular OppA receptor from gram-positive B. longum KACC91563 translocates nutrients, specifically peptides, from the outside environment of the intestinal tract to the inside of symbiotic cells. In the present study we attempt to explicate the relationship between the substrate’s specificity from the OppA importer and the probiotic effects of B. longum KACC91563 in the host intestine. It was first identified in this study the specialized structure–function relationship from the OppA importer of B. longum KACC91563 with its structural and functional determinants. This could provide insights into substrate specificity of unique immunological properties and a key switch for the substrate’s metabolism to reprogramming immune responses in the host intestine by structure-based molecular modeling. The probiotic effects of oligopeptide substrate (such as a proline-rich peptide containing at least one branched residue of leucine, isoleucine, and valine) and its metabolism for the OppA from B. longum KACC91563 are attributed to enhancement of the epithelial barrier by several different strain specific pathways to prevent the strong adhesion of pathogens.     

Peptide‐Stabilized,Fluorescent Silver Nanoclusters: Solid‐Phase Synthesis and Screening

Few‐atom silver nanoclusters (AgNCs) can exhibit strong fluorescence; however, they require ligands to prevent aggregation into larger nanoparticles. Fluorescent AgNCs in biopolymer scaffolds have so far mainly been synthesized in solution, and peptides have only found limited use compared to DNA. Herein, we demonstrate how solid‐phase methods can increase throughput dramatically in peptide ligand screening and in initial evaluation of fluorescence intensity and chemical stability of peptide‐stabilized AgNCs (P‐AgNCs). 9‐Fluorenylmethyloxycarbonyl (Fmoc) solid‐phase peptide synthesis on a hydroxymethyl‐benzoic acid (HMBA) polyethylene glycol polyacrylamide copolymer (PEGA) resin enabled on‐resin screening and evaluation of a peptide library, leading to identification of novel peptide‐stabilized, fluorescent AgNCs. Using systematic amino acid substitutions, we synthesized and screened a 144‐member library. This allowed us to evaluate the effect of length, charge, and Cys content in peptides used as ligands for AgNC stabilization. The results of this study will enable future spectroscopic studies of these peptide‐stabilized AgNCs for bioimaging and other applications.     

On-Plate Self-Desalting and Matrix-Free LDI MS Analysis of Peptides With a Surface Patterned Sample Support

A hydrophobic-hydrophilic-hydrophobic pattern has been produced on the surface of a silicon substrate for selective enrichment, self-desalting, and matrix-free analysis of peptides in a single step. Upon sample application, the sample solution is first confined in a small area by a hydrophobic F-SAM outer area, after which salt contaminants and peptides are selectively enriched in the hydrophilic and hydrophobic areas, respectively. Simultaneously, matrix background noise is significantly reduced or eliminated because of immobilization of matrix molecules. As a result, the detection sensitivity is enhanced 20-fold compared with that obtained using the usual MALDI plate, and interference-free detection is achieved in the low m/z range. In addition, peptide ions can be identified unambiguously in the presence of NH₄HCO₃ (100 mM), urea (1 M), and NaCl (1 M). When the device was applied to the analysis of BSA digests, the peptide recovery and protein identification confidence were greatly improved.