Structural and functional mimic of galactose oxidase by a copper complex of a sterically demanding [N2O2] ligand

A structural and functional mimic of the galactose oxidase (GOase) enzyme active-site by a copper complex supported over a sterically demanding ligand having [N2O2] donor sites is reported. Specifically, the binding of the histidine (496 and 581) and tyrosine (272 and 495) residues to the copper center in a square-pyramidal fashion in the active-site of galactose oxidase (GOase) enzyme has been modeled in a copper complex, ([(3-tert-butyl-5-methyl-2-hydoxybenzyl)(3'-tert-butyl-5'-methyl-2'-oxobenzyl)(2-pyridylmethyl)]amine)Cu(OAc)) (1b), stabilized over a sterically demanding ligand in which the two phenolate-O atoms mimicked the tyrosine binding while an amine-N and pyridyl-N atoms emulated the histidine binding to the metal center, similar to that in the enzyme active-site. Furthermore, the copper complex 1b is found to be an effective functional model of the enzyme as it efficiently catalyzed the chemoselective oxidation of primary alcohols to aldehydes in high turnover numbers under ambient conditions. An insight into the nature of the active-species was obtained by EPR and CV studies, which in conjunction with the DFT studies, revealed that the active-species is an anti-ferromagnetically coupled diamagnetic radical cation, (1)1b+, obtained by one electron oxidation at the equatorial phenolate-O atom of the ligand in the 1b complex.     

Syntheses, reactions, and ethylene polymerization of titanium complexes with [N,N,S] ligands

Tridentate dianionic arylsulfide free ligands [ArNHCH(2)C(6)H(4)NHC(6)H(4)-2-SPh] (Ar = Ph (3a); Ar = 2,4,6-trimethylphenyl (3b); Ar = 2,6-diisopropylphenyl (3c)) have been prepared by reduction of the corresponding imine compounds [ArN[double bond, length as m-dash]CHC(6)H(4)NHC(6)H(4)-2-SPh] (Ar = Ph (2a); Ar = 2,4,6-trimethylphenyl (2b); Ar = 2,6-diisopropylphenyl (2c)) with LiAlH(4) in high yields. Reactions of TiCl(4) with the tridentate dianionic arylsulfide free ligands (3a-3c) afford five-coordinate and four-coordinate titanium complexes [κS, κ(2)N-(ArNHCH(2)C(6)H(4)NHC(6)H(4)-2-SPh)TiCl(2)] (Ar = Ph (4a); Ar = 2,4,6-trimethylphenyl (4b)] and [κ(2)N-(ArNHCH(2)C(6)H(4)NHC(6)H(4)-2-SPh)TiCl(2)] (Ar = 2,6-diisopropylphenyl (4c)], respectively. The molecular structures of compounds 2b, 2c, 3b and 3c·HCl have been characterized by single crystal X-ray diffraction analyses. Complexes 2a-4c are characterized by IR,(1)H-NMR spectra, and elemental analysis. EXAFS spectroscopy performed on complexes 4b and 4c reveals the expected different coordination geometry due to steric hindrance effect. When activated by excess methylaluminoxane (MAO), 4a-4c can be used as catalysts for ethylene polymerization and exhibit moderate to good activities.     

Syntheses, characterization and ethylene polymerization of half-sandwich group IV metal complexes with tridentate [O,N,S] ligands

A series of half-sandwich group IV metal complexes with tridentate monoanionic phenoxy-imine arylsulfide [O NS] ligand [2-Bu t 4-Me-6-((2-(SC 6 H 5)C 6 H 4 N = CHC 6 H 2 O)](La) and dianionic phenoxy-amine arylsulfide [O N S] ligand [2-Bu t 4-Me-6-((2-(SC 6 H 5)C 6 H 4 N-CH 2 C 6 H 2 O)] 2(Lb) have been synthesized and characterized.Lb was obtained easily in high yield by reduction of ligand La with excess LiAlH 4 in cool diethyl ether.Half-sandwich Group IV metal complexes CpTi[O NS]Cl 2(1a),CpZr[O NS]Cl 2(1b),CpTi[O N S]Cl(2a),CpZr[O N S]Cl(2b) and Cp * Zr[O N S]Cl(2c) were synthesized by the reactions of La and Lb with CpTiCl 3,CpZrCl 3 and Cp * ZrCl 3,and characterized by IR,1 H-NMR,13 C-NMR and elemental analysis.In addition,an X-ray structure analysis was performed on ligand Lb.The title Group IV half-sandwich bearing tridentate [O,N,S] ligands show good catalytic activities for ethylene polymerization in the presence of methylaluminoxane(MAO) as co-catalyst up to 1.58 × 10 7 g-PE.mol-Zr 1.h 1.The good catalytic activities can be maintained even at high temperatures such as 100 ℃ exhibiting the excellent thermal stability for these half-sandwich metal pre-catalysts.     

[N,N]-二齿镍配合物催化烯烃聚合

烯烃聚合催化剂的设计是烯烃配位聚合领域的一个核心科学问题,通过设计合成精确结构的催化剂可以有效地调控催化聚合性能以及聚合产物的结构.后过渡金属催化剂由于其易调变性、对聚合产物支化结构的可控性及对极性单体的容忍性,在烯烃聚合领域引起了广泛的关注.本文介绍了近年来本课题组在[N,N]-二齿镍烯烃聚合催化剂设计方面的研究进展,包括四元环的中性脒基镍催化剂、五元环的-二亚胺镍催化剂、2-胺基吡啶和-胺基亚胺系列镍催化剂,以及六元环的-二亚胺和苯胺基亚胺镍催化剂在烯烃聚合的应用.通过优化后过渡金属镍催化剂结构,可成功实施烯烃活性聚合.     

Facile synthesis of sterically demanding SHOP‐type nickel catalysts for ethylene polymerization

The P,O‐chelated shell higher olefin process (SHOP) type nickel complexes are practical homogeneous catalysts for the industrial preparation of linear low‐carbon α‐olefins from ethylene. We describes that a facile synthetic route enables the modulation of steric hindrance and electronic nature of SHOP‐type nickel complexes. A series of sterically bulky SHOP‐type nickel complexes with variable electronic nature, {[4‐R‐C₆H₄C(O) = C‐PArPh]NiPh (PPh₃); Ar = 2‐[2′,6′‐(OMe)₂C₆H₃]C₆H₄; R = H ( Ni1 ); R = OMe ( Ni2 ); R = CF₃ ( Ni3 )}, were prepared and used as single component catalysts toward ethylene polymerization without using any phosphine scavenger. These nickel catalysts exhibit high thermal stability during ethylene polymerization and result in highly crystalline linear α‐olefinic solid polymer. The catalytic performance of the SHOP‐type nickel complexes was significantly improved by introducing a bulky ortho‐biphenyl group on the phosphorous atom or an electron‐withdrawing trifluoromethyl on the backbone of the ligand, indicating steric and electronic effects play critical roles in SHOP‐type nickel complexes catalyzed ethylene polymerization.     

Titanium complexes bearing carbamato ligands as catalytic precursors for propylene polymerization reactions

This report describes propylene polymerization reactions with titanium complexes bearing carbamato ligands, Ti(O₂CNMe₂)Cl₂ ( I ) and Ti(O₂CR₂)₄ [R₂ = NMe₂ ( II ), NEt₂ ( III ) and ( IV )]. Combinations of these complexes and MAO form catalysts for the synthesis of atactic polypropylene, as confirmed by FT‐IR, DSC and ¹³C NMR analysis. Effects of main reaction parameters on the catalyst activity were studied including the type of complex, solvent, temperature, and the [Al]/[Ti] molar ratio. The highest activity was observed when chlorobenzene was used as a solvent and AlMe₃‐depleted MAO was employed as a cocatalyst. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4095–4102     

Titanium and zirconium complexes containing sterically hindered hydrotris(pyrazolyl)borate ligands: synthesis, structural characterization, and ethylene polymerization studies

The synthesis, characterization and ethylene polymerization behavior of a set of Tp^′MCl₃ complexes (4, M=Ti, Tp^′=HB(3-neopentyl-pyrazolyl)₃⁻(Tp^Np); 5, M=Ti, Tp^′=HB(3-tert-butyl-pyrazolyl)₃⁻(Tp^tBu); 6, M = Ti, Tp^′=HB(3-phenyl-pyrazolyl)₃⁻(Tp^Ph); 7, M=Zr, Tp^′=HB(3-phenyl-pyrazolyl)₃⁻(Tp^Ph); 8, M=Zr, Tp^′ = HB(3-tert-butyl-pyrazolyl)₃⁻(Tp^tBu)) is described. Treatment of these tris(pyrazolyl)borate Group IV compounds with methylalumoxane (MAO) generates active catalysts for ethylene polymerization. For the polymerization reactions performed in toluene at 60 °C and 3 atm of ethylene pressure, the activities varied between 1.3 and 5.1 × 10³ g of PE/mol[M] · h. The highest activity is reached using more sterically open catalyst precursor 4. The viscosity-average molecular weights () of the PE’s produced with these catalyst precursors varying from 3.57 to 20.23 × 10⁵ g mol⁻¹ with melting temperatures in the range of 127-134 °C. Further polymerization studies employing 7 varying Al/Zr molar ratio and temperature of polymerization showed that the activity as well as the polymer properties are dependent on these parameters. In that case, higher activity was attained at 60 °C. The viscosity-average molecular weights of the polyethylene’s decreases with increasing Al/Zr molar ratio.     

Oxidomolybdenum(VI) complexes with atrane-type [O3N] ligands

Dioxomolybdenum(VI) complex [MoO₂Cl₂(dmso)₂] reacts with a series of tetradentate O₃N-type aminoalcohol–bisphenol ligands to form oxomolybdenum(VI) complexes of type [MoOCl(Lⁿ)]. The reaction of H₃L¹ produces [MoOCl(L¹)] as two separable isomers, whereas the reaction of H₃L² or H₃L³ yields a single product. The X-ray analyses of cis- and trans-[MoOCl(L¹)] reveal that the complexes are formed of monomeric molecules. The ligands have tetradentate coordination through three oxygen donors and one nitrogen donor, which is located trans to the terminal oxo group. The sixth coordination site is occupied by a chloro ligand.     

Simple (imidazol-2-ylidene)-Pd-acetate complexes as effective precatalysts for sterically hindered Suzuki-Miyaura couplings

[reaction: see text] A simplified synthesis of N-heterocyclic carbene (NHC)Pd-carboxylate complexes and their activity in Suzuki-Miyaura cross-coupling reactions are described. Coupling of sterically hindered aryl and activated alkyl chlorides bearing beta-hydrogens has been successfully achieved.     

A new coupling reaction for the synthesis of ruthenium half-sandwich complexes with sterically demanding cyclopentadienyl ligands

The reaction of RuCl(3)(solv.)(n) with tert-butylacetylene in methanol or ethanol leads to the formation of chloro-bridged half-sandwich complexes with sterically demanding cyclopentadienyl ligands, which are of high interest as starting materials for the synthesis of novel Ru catalysts.     

Silver(I) complexes of a sterically demanding fluorinated triazapentadienyl ligand [N((C3F7)C(Dipp)N)2]- (Dipp = 2,6-diisopropylphenyl)

Sterically demanding triazapentadiene [N((C3F7)C(Dipp)N)2]H affords the isolation of thermally stable, two- and three-coordinate silver complexes. The free ligand [N((C3F7)C(Dipp)N)2]H has a W-shaped ligand backbone in the solid state.[N((C3F7)C(Dipp)N)2]H reacts with silver(I) oxide in acetonitrile leading to CH(3)CNAg [N((C3F7)C(Dipp)N)2]HIt features a two-coordinate silver center and a kappa(1)-coordinated triazapentadienyl ligand. This silver acetonitrile complex serves as an excellent precursor to obtain thermally stable, silver isocyanide t-BuNCAg [N((C3F7)C(Dipp)N)2]Hand silver phosphine [[N((C3F7)C(Dipp)N)2]HAgPPh(3) adducts. IR spectroscopic data for the silver(I) isocyanide t-BuNCAg [N((C3F7)C(Dipp)N)2]Hshows nu(CN) at 2219 cm(-)(1). The silver ion coordinates to the triazapentadienyl ligand via the central nitrogen atom. The silver PPh(3) adduct,[N((C3F7)C(Dipp)N)2]HAgPPh(3), was synthesized by treating CH3CNAg [N((C3F7)C(Dipp)N)2]Hwith PPh(3). It displays relatively large Ag-P coupling in the (31)P NMR spectrum. The triazapentadienyl ligand in[N((C3F7)C(Dipp)N)2]HAgPPh(3) acts as a chelating kappa(2)-donor. The Ag-P bond is relatively short (2.3487(10) A).     

Synthesis and thermogravimetric analysis of inclusion complexes of O2N2-donor Aza-crown macrocyclic ligands with [60]fullerene

A simple method for the formation of inclusion complex of [60]fullerene with two O₂N₂-donor aza-crown macrocyclic ligands was introduced. The products were characterized using UV–vis and IR spectroscopies as well as HPLC, and ESI mass spectrometry. The ESI mass and elemental analysis data revealed that the ratio of macroring:[60]fullerene were not the same. The binding capability of the macrorings as well as the number of the macroring addends to [60]fullerene were investigated using thermogravimetric analysis (TG) and differential scanning calorimetry (DSC). Considering percentage mass loss in different steps of TG and the enthalpy changes in DSC found for each of these products, the number of their addends on [60]fullerene were calculated. Theoretical calculations in semi-empirical level using AM1 suggested that proper orientation of the nitrogen-donor groups on the aza-crown macrorings toward [60]fullerene could be the main factor for the observed difference in the number of macroring addends attached to [60]fullerene.     

Extended-chain, multinuclear transition metal complexes bridged by cyanodiazenido(1-), [N=N-C[triple bond, length as m-dash]N]-, ligands

Extended-chain complexes containing multiple transition metal centres linked by conjugated micro-cyanodiazenido(1-) ligands [N=N-C[triple bond, length as m-dash]N]- have been obtained by reaction of trans-[BrW(dppe)2(N2CN)], , [dppe=1,2-bis(diphenylphosphino)ethane] with dirhodium(II) tetra-acetate, bis(benzonitrile)palladium(II) dichloride, and bis(aqua)M(II) bis(hexafluoroacetylacetonate) (M=Mn, Ni, Cu, Zn): stronger Lewis acids such as tetrakis(acetonitrile)palladium(II) tetrafluoroborate and boron trifluoride promote hydrolysis of complex , leading to the isolation of a novel carbamoylhydrazido(2-) complex, trans-[BrW(dppe)2(N2HC=ONH2)]+[BF4]-.     

Synthesis and structural characterization of tris(2-mercapto-1-adamantylimidazolyl)hydroborato complexes: a sterically demanding tripodal [S3] donor ligand

The tris(2-mercapto-1-adamantylimidazolyl)hydroborato ligand, [Tm(Ad)], has been synthesized via the reaction of 1-adamantyl-2-mercaptoimidazole with MBH(4) (M = Li, K). [Tm(Ad)]M has been used to synthesize a variety of compounds of the main-group and transition elements, including [Tm(Ad)]ZnI, {[Tm(Ad)]GaI}[GaI(4)], {[Tm(Ad)]GaCl}[GaCl(4)], {[Tm(Ad)]GaGa[Tm(Ad)]}[GaCl(4)](2), {[Tm(Ad)](2)In}[InI(4)], [Tm(Ad)]In(κ(2)-mim(Ad))Cl, [Tm(Ad)]Ga→B(C(6)F(5))(3), [Tm(Ad)]In→B(C(6)F(5))(3), and [Tm(Ad)]Re(CO)(3). Structural characterization of [Tm(Ad)]Re(CO)(3) demonstrates that the [Tm(Ad)] ligand is more encapsulating than other [Tm(R)] ligands, including [Tm(Bu(t))], while IR spectroscopic studies indicate that the [Tm(Ad)] and [Tm(Bu(t))] ligands have very similar electron-donating properties.     

Tungsten(VI) complexes with aminobis(phenolato) [O,N,O] donor ligands

The reaction between trisdiolatotungsten(VI) complex [W(eg)(3)] (1) (eg = 1,2-ethanediolato dianion) and phenolic ligand precursor methylamino-N,N-bis(2-methylene-4,6-dimethylphenol) (H(2)L(Me)) or methylamino-N,N-bis(2-methylene-4-methyl-6-tert-butylphenol) (H(2)L(tBu)) affords monomeric oxotungsten complex [WO(eg)(L(Me))] (2) or [WO(eg)(L(tBu))] (3), respectively. These complexes react further with chlorinating reagents, which leads to the displacement of ethanediolato ligands from the complex units and formation of cis and trans isomers of the corresponding dichloro complexes [WOCl(2)(L(Me))] (4) and [WOCl(2)(L(tBu))] (5), respectively. Identical dichloro complexes were also prepared by the reaction between the above-mentioned phenolic ligand precursors and [WOCl(4)]. Molecular structures of 3, cis-4, trans-4, and cis-5 were verified by X-ray crystallography. Complexes 2-5 can be activated by Et(2)AlCl to catalyze ring-opening metathesis polymerization of norbornene.     

4,5,6,7-Tetrachlorobenzo[d][1,3,2]dioxaborol- 2-ol as an effective catalyst for the amide condensation of sterically demanding carboxylic acids

[reaction: see text] 4,5,6,7-Tetrachlorobenzo[d][1,3,2]dioxaborole (4a) and 4,5,6,7-tetrachlorobenzo[d][1,3,2]dioxaborol-2-ol (4b) are effective catalysts for the dehydrative amide condensation between an equimolar mixture of carboxylic acids and amines. In particular, these catalysts are greatly superior to 3,5-bis(trifluoromethyl)phenylboronic acid (1) for the amide condensation of sterically demanding carboxylic acids. In contrast, 4c, which is prepared from a 1:2 molar mixture of B(OH)(3) and tetrachlorocatechol, is effective as a Lewis acid-assisted Br?nsted acid (LBA) catalyst for Ritter reaction.     

Mitigating chain‐transfer and enhancing the thermal stability of co‐based olefin polymerization catalysts through sterically demanding ligands

Sterically demanding Fe‐ and Co‐based olefin polymerization catalysts 2‐Fe and 2‐Co bearing 2,6‐bis(biphenylmethyl)‐4‐methylaniline substituted bis(imino)pyridine ligands were synthesized and evaluated for ethylene polymerization. The late‐transition metal complexes were characterized by X‐ray diffraction, NMR spectroscopy, and HRMS, while their resultant polymers were characterized by size‐exclusion chromatography and ¹H NMR spectroscopy. While catalyst 2‐Fe was inactive, catalyst 2‐Co was found to polymerize ethylene and avoid any detectable chain‐transfer to aluminum events that are known to plague other Fe‐ and Co‐based catalyst systems and to limit molecular weight. Furthermore, 2‐Co displays virtually perfect thermal stability up to 80 °C and shows greatly enhanced thermal stability at 90 °C as compared to previously reported analogues. These observations are attributed to the extreme steric demand imposed by the ligand which mitigates catalyst transfer, deactivation, and decomposition reactions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3990–3995     

Formation of N2O from a nickel nitrosyl: isolation of the cis-[N2O2]2- intermediate

Addition of 2,2'-bipyridine (bipy) to [Ni(NO)(bipy)][PF(6)] (1) results in formation of a rare five-coordinate nickel nitrosyl [Ni(NO)(bipy)(2)][PF(6)] (2). This complex exhibits a bent NO(-) ligand in the solid state. On standing in acetonitrile, 2 furnishes the NO coupled product, [Ni(κ(2)-O(2)N(2))(bipy)] (8) in moderate yield. Subsequent addition of 2 equiv of acetylacetone (H(acac)) to 8 results in formation of [Ni(acac)(2)(bipy)], N(2)O, and H(2)O. Preliminary mechanistic studies suggest that the N-N bond is formed via a bimetallic coupling reaction of two NO(-) ligands.     

Vanadium complexes possessing N2O2S2-based ligands: highly active procatalysts for the homopolymerization of ethylene and copolymerization of ethylene/1-hexene

The family of ligands containing an N2O2S2 core, namely, 1,2-di(3-Me-5-t-Bu-salicylaldimino-o-phenylthio)ethane (H2L1), 1,3-di(3-Me-5-t-Bu-salicylaldimino-o-phenylthio)propane (H2L2), 1,4-di(3-Me-5-t-Bu-salicylaldimino-o-phenylthio)butane (H2L3), and 1,2-di(3-Me-5-t-Bu-salicylaldamino-o-phenylthio)ethane (H2L4), have been prepared and complexed with a variety of vanadium chlorides and alkoxides to afford complexes of the form [V(X)L1] (X = O (1), Np-tol (2), Cl (3)), [V(O)(L2,3)] (L2 (4), L3 (5)), and [V(L4)] (6). Crystal structure determinations of H2L1 and H2L4 show the molecule to be centrosymmetric about the bridging ethane moiety, with structural determination of 1 and 3 revealing isostructural monomeric complexes in which the ligand chelates in such a way as to afford pseudo-octahedral coordination at the vanadium center. Prolonged reaction of H2L1 with [V(Np-tol)(OEt)3] led, via oxidative cleavage of the C-S bond, to the bimetallic complex [V2L1(3-Me,5-t-Bu-salicylaldimino-o-phenylthiolate)2] [VL'] (7), as characterized by single-crystal X-ray crystallography. 7 was also isolated from the reaction of H2L4 and [VO(On-Pr)3]. The ability of 1-7 to catalyze the homopolymerization of ethylene and the copolymerization of ethylene/1-hexene in the presence of dimethylaluminum chloride (DMAC) has been assessed: screening reveals that for ethylene homopolymerization 1-7 are all highly active (>1000 g/mmol.h.bar), with the highest activity (ca. 11 000 g/mmol.h.bar) observed using catalyst 3; the use of trimethyl aluminum (TMA) or methylaluminoxane (MAO) as the cocatalyst led only to poorly active systems producing negligible polymer. Analysis of the polyethylene produced showed high molecular weight linear polymers with narrow polydispersities. For ethylene/1-hexene copolymerization, activities as high as 1,190 g/mmol.h.bar were achieved (4); analysis of the copolymer indicated an incorporation of 1-hexene in the range of 5-13%.