Kinetics Characterization of Ion Release under Dynamic and Batch Conditions. I. Weak Acid and Weak Base Ion Exchange Resins

The aim of the present work is concerned with a study of the kinetics of release of both Ca²⁺ and F⁻ from the corresponding loaded ion-exchange resins (weak acid and weak base character for Ca²⁺ for F⁻, respectively), using both dynamic and batch experimental conditions with an artificial saliva solution as the ion-exchange media at 293 and 310 K. The influence of resin particle size and the temperature were evaluated by the kinetics parameters for the effective rate of release (B) and diffusion coefficient (D). The rate of ion release increases with temperature and decreases with particle size. The experimental data were well fitted by models based on intraparticle diffusion-controlled processes. In dynamic studies, the linear dependence of −log ₁₀(B) with the diameter of the resin particles can be applied for the estimation of B values when resins of low particle size are considered. In batch processes, although resins of low particle size can be studied, a linear relationship was only attained for the case of slow ion-exchange kinetic systems.     

Thermodynamics of ion exchange of H<Superscript>+</Superscript> by Na<Superscript>+</Superscript> or NH<Subscript>4</Subscript><Superscript>+</Superscript> on ion-exchange resins based on <Emphasis Type="Italic">C</Emphasis>-tetramethylcalix[4]resorcinarene

The corrected selectivity coefficients of the ion exchange H⁺-Na⁺ and H⁺-NH₄ ⁺ on ion-exchange resins based on C-tetramethylcalix[4]resorcinarene were calculated from the experimental data obtained from studying ion-exchange equilibria. The preference of the ion-exchange resins for cations increases in the sequence: Na⁺ < NH₄ ⁺ < < H⁺, and the ion-exchange resin based on (2-furyl)hydroxymethyltetramethylcalix[4]resorcinarene has a higher preference for ammonium cations. According to the results of microcalorimetric measurements, the exchange H⁺-Na⁺ on this ion-exchange resin is accompanied by the highest change in the differential enthalpy. It follows from the quantum-chemical calculations that the introduction of a (2-furyl)hydroxymethyl group into the structure of the polymer induces additional electrostatic interactions between an ammonium cation and an elementary unit of the ion-exchange resin.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2560–2563, December, 2004.     

Analysis of the Pore Structure of Ion-Exchange Resins and the Adsorption Equilibrium of Fe3+/Cl− Complex Ions

The microstructure of ion-exchange resins has been investigated to understand more clearly the ion-exchange mechanism. Nine types of resins with different pore structures were used: all of the polystyrene family crosslinked with divinylbenzene and anionic resins, with mesh sizes ranging from 100 to 200, except for one (20–50 mesh). Various pore volumes of each resin were determined by measurements of intrusion of some chemical species (H₂O, Nd³⁺, and Hg) into the resin. The results are analyzed on the basis that an ion-exchange resin particle consists of four regions. They are: 1) the mercury intrusion region, 2) the region where coions (such as Nd³⁺) can intrude but mercury cannot, 3) the region where water or counterions can intrude but coions cannot, and 4) the polymer matrix region occupied by the polymer skeleton. The former two regions are not influenced by the resin-fixed ionic groups. While it used to be thought that specific adsorption of counterions may occur in the entire exchange resin particle, it is appropriate to consider that specific adsorption takes place only in the latter two regions. According to this point of view, the adsorption equilibrium of the Fe³⁺/Cl^? complex ions could be explained more satisfactorily.     

Mikroanalyse mit Hilfe von Ionenaustauschern. XXVII

Zusammenfassung Eine Reihe neuer und empfindlicher Harztüpfelmethoden zum Nachweis von Fluoridspuren wird vorgeschlagen. Die Entfärbung farbiger Metallchelate durch Substitution mit Fluorid sowie der Farbwechsel durch Bildung fluorhaltiger ternärer Komplexe an Anionenaustauscherkügelchen schwacher Eigenfarbe lassen sich erfolgreich anwenden. Die Erfassungsgrenze beträgt 85 ng F^– bei der Beryllium(II)-Chromazurol-S-Methode, 57 ng F^– bei der Aluminium-(III)-Hämatoxylin-Methode und 80 ng F^– bei der Cer(III)-Alizarin-komplexon-Methode. Einflüsse störender Begleitionen werden beschrieben.

---

Microanalysis with the aid of ion-exchange resins. XXVII

Summary A series of new sensitive resin spot tests for the detection of fluoride is proposed based on the decolorization of the coloured metal chelates by substitution with fluoride as well as the colour change by the formation of ternary fluorocomplexes on the beads of pale-coloured anion-exchange resins. Limits of identification are determined to be 85 ng, 57 ng and 80 ng of fluoride for the tests using beryllium(II)-Chrome Azurol S, aluminium(III)-haematoxylin and cerium(III)-Alizarincomplexone, respectively. Influences of the interfering ions are also studied.

---

---

Vorgetragen bei der 18. Hauptversammlung der Japanischen Gesellschaft für Analytische Chemie, Sapporo, Japan, 2. Oktober 1969. Vortrag Nr. 2D14.     

Preconcentration of trace amounts of tungsten on Amberlite XAD-7 for its spectrophotometric determination in hot spring water

A preconcentration procedure, using a short column loaded with Amberlite XAD-7, is proposed for the spectrophotometric determination of traces of tungsten. The procedure is based on the retention of tungsten on the resin after its reduction to a W(V)-thiocyanate complex with tin(II) chloride solution. Interference effects have been shown to be neglible for foreign ions including Ca²⁺, Mg²⁺, Na⁺, SO₄ ^2–, F^–, NO₃ ^–, Cu²⁺, Fe³⁺ and Mo⁶⁺. The procedure has been applied to hot spring water with satisfactory results (Recovery > 95%; relative standard deviation < 5%; relative error < 3%).     

Negative ion formation in compounds relevant to SF6 decomposition in electrical discharges

Dissociative and nondissociative electron attachment in the electron impact energy range 0–14 eV are reported for SOF₂ SOF₄, SO₂F₂, SF₄, SO₂, and SiF₄ compounds which can be formed by electrical discharges in SF₆. The electron energy dependences of the mass-identified negative ions were determined in a time-of-flight mass spectrometer. The ions studied include F^– and SOF ₂ ^–* from SOF₂; SOF ₃ ^– and F^– from SOF₄; SO₂F ₂ ^–* , SO₂F^–, F ₂ ^– , and F^– from SO₂F₂; SF ₄ ^–* and F^– from SF₄; O^–, SO^–, and S^– from SO₂; and SiF ₃ ^– and F^– from SiF₄. Thermochemical data have been determined from the threshold energies of some of the fragment negative ions. Lifetimes of the anions SOF ₂ ^–* , SO₂F ₂ ^–* , and SF ₄ ^–* are also reported.     

Synthesis of precipitated calcium carbonate nanoparticles using a two-membrane system

Precipitated calcium carbonate (PCC) nanoparticles were synthesized using a two-membrane system composed of a combination of a dialysis membrane tubing (DMT) and an emulsion liquid membrane (ELM). During the process, Ca²⁺ was diffused through the DMT, then the ELM, and finally reacted with CO ₃ ^2– ions in the internal water-in-oil (w/o) emulsion droplets. Each individual droplet was used as a microreactor. Results showed that the particle size and morphology of PCC were depended not only on the diffusion rate of Ca²⁺ across the liquid membrane, but also the carrier concentration as well. The PCC particles were mainly in vaterite form and their size increased steadily with the reaction time, as proved by X-ray diffraction and transmission electron microscopy studies.From Kolloidnyi Zhurnal, Vol. 66, No. 6, 2004, pp. 829–834.Original English Text Copyright © 2004 by Zeshan Hu, Yulin Deng, Qunhui Sun.This article was submitted by the authors in English.     

Kinetics of Sulfur Oxide, Sulfur Fluoride, and Sulfur Oxyfluoride Anions with Ozone

Rate constants and product branching ratios were measured for eleven sulfur oxide, sulfur fluoride, and sulfur oxyfluoride anions reacting with O₃. The SO^– ₂ ion reacts rapidly to form –O^– ₃, SO^– ₃, and e^–. The temperature dependence of the branching ratio shows more reactive detachment and less SO^– ₃ formation at higher temperature. SO^– ₃ reacts with O₃, forming SO^– ₄ at 1/3 to 1/4 of the collisional rate from 200 to 500 K, respectively. At 300 K, SF^– ₆ charge transfers to O₃ at 20% of the collisional rate. F₂SO^– ₂ reacts with O₃ at a few percent of the collision rate, forming both O^– ₃ and FSO^– ₃; The ion F₃SO^– reacts slowly with O₃ to form F₃SO^– ₂. The ions SO^– ₄, SF^– ₅, FSO^– ₂, FSO^– ₃, F₃SO^–, and F₅SO^– are unreactive with O₃. A trend is noted relating the ion reactivity with the coordination of the central sulfur atom, i.e., the number of S–F bonds plus two times the number of S=O bonds. Only ions with a sulfur coordination of 4 or 6 are reactive, although the reaction rate constants are generally small. The reactivity trends appear to be partially explained by spin conservation. These reactions are all sufficiently slow, so O₃ reactions should not play a major role in SF₆/O₂ discharges. All ions studied have been found to be unreactive with O₂.     

Incongruent dissolution of hydroxyapatite in the presence of phosphoserine

Concentrations of phosphate and calcium ions, liberated from the surface of hydroxyapatite (HAP) during the adsorption of phosphoserine (PSer), were determined at 30°C. HAP showed a marked incongruent dissolution behavior in the presence of PSer. That is, the concentration of phosphate ion in solution increases with the addition of PSer due to the ion-exchange between PSer and phosphate ion on HAP (molar ratio of the former to the latter=32), whereas the concentration of calcium ion decreases with this release of phosphate ion, because the solubility product of HAP restricts the concentrations of both ions in solution (calculated values of — log (Ca²⁺)¹⁰ (PO ₄ ^3– )⁶ (OH^–)² were 115.8±1.0). The affinity of PSer to HAP was highest at pH 5.8 where the PSer and the HAP surface had the opposite charges. This electrostatic attraction force between PSer and HAP was shielded to some extent by the addition of KCl.     

A structural study of saturated aqueous solutions of some alkali halides by X-ray diffraction

The structure of nearly saturated or supersaturated aqueous solutions of NaCI [6.18 mol (kg H₂O)^–1], KCI [4.56 mol (kg H₂O)^–1], KF [16.15 mol (kg H₂O)^–1] and CsF [31.96 mol (kg H₂O)^–1] has been investigated by means of solution X-ray diffraction at 25°C. In the NaCI and KCI solutions about 30% and 60%, respectively, of the ions form ion pairs and the Na⁺–Cl^– and K⁺–Cl^– distances have been determined to be 282 and 315 pm, respectively. The average hydration numbers of Na⁺ and Cl^– ions are 4.6 and 5.3, respectively, in the NaCI solution and those of K⁺ and Cl^– ions in the KCI solution are both 5.8. In the KF solution, clusters containing some cations and anions, besides 1:1 (K⁺–F^–) ion pairs, are formed. The K⁺–F^– interatomic distance has been determined to be 269 pm, and nonbonding K⁺...K⁺ and F^–...F^– distances in the clusters are 388 and 432 pm, respectively, and the average coordination numbers n _KF , n _KK and n _FF have been estimated to be 2.3, 1.9, and 1.6, respectively. In the highly supersaturated CsF solution an appreciable amount of clusters containing several caesium and fluoride ions are formed. The Cs⁺–F^– distance in the cluster has been determined to be 312 pm, while the nonbonding Cs⁺...Cs⁺ and F^–...F^– distances are estimated to be 442 and 548 pm, respectively, the distances being about and times the Cs⁺–F^– distance, respectively. The coordination numbers n _CsF , n _CsCs , and n _FF in the first coordination sphere of each ion are 3.3, 2.3 and 5.3, respectively, and the result shows the formation of clusters of higher order than 1:1 and 2:2 ion pairs. These ion pairs and clusters may be regarded as embryos for the formation of nuclei of crystals and the results obtained in the present diffraction study support observations for the nucleation of the alkali halide crystals studied by molecular dynamics simulations previously examined.     

The separation of synthetic mixtures of glucose and fructose and also inverted sucrose feedstocks using countercurrent chromatographic techniques

Summary A pilot scale semi-continuous countercurrent chromatographic Refiner (SCCR4) unit packed with a Zerolit 225 resin in the Ca²⁺ form has been used to separate synthetic mixtures of glucose and fructose and also inverted sucrose feedstocks into glucose-rich and fructose-rich products.For the same process conditions less pure fructose-rich products were found when using inverted sucrose feedstocks than with synthetic mixtures of glucose and fructose. However, anion-exchange resins Duolite A113 in the (HSO ₃ ^– ) form did not produce any variation in product purities with change of feed source.     

Studies on ion exchange equilibria and kinetics VI. Prediction of ion exchange equilibria of UO 2 2+ −Na+−H+ ternary system

Experimental data are reported for the ion exchange equilibria of the binary systems UO ₂ ²⁺ –H⁺, UO ₂ ²⁺ –Na⁺ and Na⁺–H⁺, and of the ternary system UO ₂ ²⁺ –Na⁺–H⁺ on a strong acid cation exchange resin 001X7 at 25 °C. It is found that the equilibria for any pairs of ions are essentially the same in binary and ternary mixtures and that the prediction method proposed by our laboratory for SO ₂ ^2– –Cl^––NO ₃ ^– -201X7 strong base anion exchange resin system is also applicable to the ternary system studied in this paper. The predictions of the ternary system UO ₂ ²⁺ –Na⁺–H⁺ based solely on the binary data without using resin phase activity coefficients are consistent with the experimental data.     

Superionic Conduction in Complex Fluorides of Antimony(III) MnSbxFy (M—Cations of an Alkali Metal, Ammonium, or Thallium, n = 1–3, and x = 1–4)

Methods of ¹⁹F NMR and impedance spectroscopy are used to investigate the internal mobility of fluoride (ammonium) ions and electrophysical characteristics of complex trivalent antimony fluorides MSb₄F₁₃, MSb₃F₁₀, MSb₂F₇, M₂Sb₃F₁₁, M₃Sb₄F₁₅, and MSbF₄ (M is an alkali cation, ammonium, thallium). The ion motion types in the cationic and anionic sublattices of the fluorides are determined at 150–500 K. The polymorphous transformations in the fluorides are usually phase transitions to a superionic state and their high ionic (superionic) conductivity (σ ≥ 10⁻⁴ to 10⁻² S cm⁻¹ at 400 K) is due to the diffusion motion of ions of fluoride, ammonium, and possibly sodium, potassium, and thallium. The high polarizability of thallium ions favors the development of high mobility of fluoride ions in the fluorides.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 560–572.Original Russian Text Copyright © 2005 by Kavun, Uvarov, Slobodyuk, Brovkina, Zemnukhova, Sergienko.     

Nonempirical calculations of models of interstitial defects in an LiF crystal

Models of interstitial Li⁺ and F^– ions in an LiF crystal have been calculated by the nonempirical Hartree-Fock-Roothaan method with the 4-31G+ basis and with the aid of a nonempirical pairwise potential. It has been shown that the energies needed for the adiabatic transfer of Li⁺ and F^– ions from infinity to interstitial positions in Li₄F₄ cubes are equal to +2.3 and +8.1 eV, respectively. The energies required for the transfer of Li⁺ and F^– ions from infinity to interstitial positions in a large cubic cluster of 4000 LiF molecules (a cube with an edge consisting of 20 atoms) are determined to a considerable extent by the long-range interactions of nonelectro-static nature and are equal to –0.25 and +9.9 eV, respectively, without consideration of the relaxation of the lattice.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 10, pp. 2272–2277, October, 1989.We express our thanks to P. Charskii for supplying his version of the HONDO-5 + MP2 program and to V. G. Zakzhevskii for supplying the GAUSSIAN-SM program.     

Reactions of carbon cluster ions stored in an RF trap

Reactions of carbon clusterions with O₂ were studied by using an RF ion trap in which cluster ions of specific size produced by laser ablation could be stored selectively. Reaction rate constants for positive and negative carbon cluster ions were estimated. In the case of the positive cluster ions, these were consistent with the previous experimental results using FTMS. Negative carbon cluster ions C _n ^– (n=4–8) were much less reactive than positive cluster ions. The C_nO^– products were seen only in n=4 and 6.     

Evaluation of a microwave-assisted extraction technique for determination of water-soluble inorganic species in urban airborne particulate matter

A simple and rapid microwave-assisted extraction (MAE) technique has been developed for the determination of water-soluble inorganic species (cations: Na⁺, NH₄⁺, K⁺, Ca²⁺ and Mg²⁺ and anions: F^–, Cl^–, NO₃^–, PO₄^3– and SO₄^2–) in airborne particulate matter. The analytes were extracted under different treatment conditions such as microwave power and extraction time. They were quantified using ion chromatography. The observed concentrations and recovery yields obtained under different conditions were compared. The results of a comparison between this MAE and sonication using NIST SRM 1648 are also given in this paper. The optimized MAE technique gave results in good agreement with the values obtained by the sonication. For some ions, for example Mg²⁺ and K⁺, recovery was low with both techniques. The results demonstrated that the optimized MAE is fast and efficient compared with conventional ultrasonic extraction. Urban airborne particles were collected and subjected to the MAE followed by the IC analysis to determine the relative proportions of different water-soluble inorganic species. These results are briefly discussed.     

Mixed insoluble acidic salts of tetravalent metals V. Effect of gamma radiation and drying temperature on granular mixed zirconium-titanium phosphates

Solid ZrOCl₂·8H₂O was added in a slow stream to a solution of phosphoric acid or to a solution of TiCl₄ in phosphoric acid to obtain granules of amorphous Zr(HPO₄)₂·nH₂O or Zr_xTi(_1–x) (HPO₄)₂·nH₂O(where x=0.95–0.80). Half of each product had been soaked in ethanol to produce alcohol solvated materials. It was found that the particle size of the resulting materials is very similar to that of ZrOCl₂·8H₂O, in such a way that it may be controlled indirectly. These materials are suitable for ion-exchange column operations. The relatively high gamma radiation doses of⁶⁰Co source did not alter its exchange properties. pH-titrations were performed by an automatic titrimeter and the exchange capacities of alkali metal ions were determined by isotopic tracer technique. Effect of drying temperature on the ion exchange properties of Na⁺, K⁺ and Cs⁺ on the granular materials have been studied. Other characterizations were made by usual chemical analysis and thermography.     

Thermal transformation of quaternary compounds in NaF–CaF2–AlF3 system

Details of quaternary compounds formation in the system NaF–CaF₂–AlF₃ are specified. To achieve this aim, the samples of phases NaCaAlF₆ and Na₂Ca₃Al₂F₁₄ have been obtained by high-temperature solid-phase synthesis. Their thermal behavior when heated up to 800 °C has been studied using the methods of high-temperature X-ray diffraction (XRD) and thermal analysis (TA). The system under consideration can be regarded as a quasibinary section CaF₂–NaAlF₄, where at T=745–750 °C invariant equilibrium is implemented with the phases CaF₂–NaCaAlF₆–Na₂Ca₃Al₂F₁₄–(liquid melt)–(NaAlF₄). The peculiarity of the equilibrium is NaAlF₄ metastability at normal pressure. Below the equilibrium temperature the quaternary phase Na₂Ca₃Al₂F₁₄ is stable and NaCaAlF₆ above this temperature. The phase NaCaAlF₆ fixed by rapid quenching from high temperatures and when heated up to 640 °C decomposes, yielding Na₂Ca₃Al₂F₁₄. Further heating in vacuum at temperature up to 740 °C results in decomposition of Na₂Ca₃Al₂F₁₄ into CaF₂ and Na₃AlF₆. The expected reverse transformation of Na₂Ca₃Al₂F₁₄ into NaCaAlF₆ has not been observed under experimental conditions. Transformations in bulk samples reveal direct and reverse transformation of quaternary phases.

Synopsis

Thermal transformation of the quaternary compounds in system (NaF–CaF₂–AlF₃) was investigated using high-temperature X-ray diffraction (XRD) and thermal analysis (TA). In the system the invariant equilibrium is implemented with the phases CaF₂–NaCaAlF₆–Na₂Ca₃Al₂F₁₄–(liquid melt)–(NaAlF₄) at T=745–750 °C.     

Investigation of hydrofluorides of the alkaline earth metals by the NMR method

Summary The structure of hydrofluorides with the composition MeF₂ · HF(Me=Sr, Ba) includes two anions: F^– and HF₂ ^– with a linear hydrogen bond. In SrF₂ · HF, the hydrogen bond is characterized by a more asymmetrical position of the proton than in BaF₂ · HF.Increasing the number of added HF molecules leads to the formation of two bifluoride ions in the compounds CaF₂ · 2HF and SrF₂ · 2.5HF. The hydrogen bond in this case is also nonsymmetrical, and the average F–H distance is equal to 1.17 A. Thus, the hydrogen bond in these compounds is of the same order as in KF · 2HF (r_F–F=2.33 A) [12],i.e., weaker than in KF · HF (r_F–F=2.26 A) [13], but stronger than in solid HF (r_F–F=2.49 A) [14].A structure with two polyfluoride anions evidently corresponds to the compound BaF₂ · 3HF.Institute of Inorganic Chemistry, Siberian Branch of the Academy of Sciences of the USSR. Translated from Zhurnal Strukturnoi Khimii, Vol. 9, No. 2, pp. 202–206, March–April, 1968.     

Viscosities and intradiffusion coefficients in the ternary system NaCl−MgCl2−H2O at 25°C

The intradiffusion coefficients of Na⁺, Cl^– ions and water and the tracerdiffusion coefficients of Ca²⁺ ion have been measured in the ternary system NaCl–MgCl₂–H₂O at 25°C. The intradiffusion coefficients of Mg²⁺ in this system have been estimated from the corresponding Ca²⁺ diffusion measurements. Viscosities were measured at the same solution concentrations as were used for the diffusion experiments. Intradiffusion and tracerdiffusion coefficients in a range of temperatures from 5 to 45°C are reported for standard sea-water which is a member of the above ternary set.