Enzymatic electrodes nanostructured with functionalized carbon nanotubes for biofuel cell applications

Nanostructured bioelectrodes were designed and assembled into a biofuel cell with no separating membrane. The glassy carbon electrodes were modified with mediator-functionalized carbon nanotubes. Ferrocene (Fc) and 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonate) diammonium salt (ABTS) bound chemically to the carbon nanotubes were found useful as mediators of the enzyme catalyzed electrode processes. Glucose oxidase from Aspergillus niger AM-11 and laccase from Cerrena unicolor C-139 were incorporated in a liquid-crystalline matrix-monoolein cubic phase. The carbon nanotubes–nanostructured electrode surface was covered with the cubic phase film containing the enzyme and acted as the catalytic surface for the oxidation of glucose and reduction of oxygen. Thanks to the mediating role of derivatized nanotubes the catalysis was almost ten times more efficient than on the GCE electrodes: catalytic current of glucose oxidation was 1 mA cm⁻² and oxygen reduction current exceeded 0.6 mA cm⁻². The open circuit voltage of the biofuel cell was 0.43 V. Application of carbon nanotubes increased the maximum power output of the constructed biofuel cell to 100 μW cm⁻² without stirring of the solution which was ca. 100 times more efficient than using the same bioelectrodes without nanotubes on the electrode surface.     

Multilayer structured carbon nanotubes/poly-l-lysine/laccase composite cathode for glucose/O2 biofuel cell

Multilayer film of laccase, poly-l-lysine (PLL) and multi-walled carbon nanotubes (MWNTs) were prepared by a layer-by-layer self-assembly technique. The results of the UV–vis spectroscopy and scanning electron microscopy studies demonstrated a uniform growth of the multilayer. The catalytic behavior of the modified electrode was investigated. The (MWNTs/PLL/laccase)_n multilayer modified electrode catalyzed four-electron reduction of O₂ to water, without any mediator. The possible application of the laccase-catalyzed O₂ reduction at the (MWNTs/PLL/laccase)_n multilayer modified ITO electrode was illustrated by constructing a glucose/O₂ biofuel cell with the (MWNTs/thionine/AuNPs)₈ GDH film modified ITO electrode as a bioanode and the (MWNTs/PLL/laccase)₁₅ film modified ITO electrode as a biocathode. The open-circuit voltage reached to 700 mV, and the maximum power density achieved 329 μW cm⁻² at 470 mV of the cell voltage.     

Interactions in single wall carbon nanotubes/pyrene/porphyrin nanohybrids

This work provides an in-depth look at a range of physicochemical aspects of (i) single wall carbon nanotubes (SWNT), (ii) pyrene derivatives (pyrene(+)), (iii) porphyrin derivatives (ZnP(8)()(-)() and H(2)()P(8)()(-)()), (iv) poly(sodium 4-styrenesulfonate), and (v) their combinations. Implicit in their supramolecular combinations is the hierarchical integration of SWNT (as electron acceptors), together with ZnP(8)()(-)() or H(2)()P(8)()(-)() (as electron donors), in an aqueous environment mediated through pyrene(+). This supramolecular approach yields novel electron donor-acceptor nanohybrids (SWNT/pyrene(+)/ZnP(8)()(-)() or SWNT/pyrene(+)/H(2)()P(8)()(-)()). In particular, we report on electrochemical and photophysical investigations that as a whole suggest sizeable and appreciable interactions between the individual components. The key step to form SWNT/pyrene(+)()/ZnP(8)()(-)() or SWNT/pyrene(+)()/H(2)()P(8)()(-)() hybrids is pi-pi interactions between SWNT and pyrene(+), for which we have developed for the first time a sensitive marker. The marker is the monomeric pyrene fluorescence, which although quenched is (i) only present in SWNT/pyrene(+) and (ii) completely lacking in just pyrene(+). Electrostatic interactions help to immobilize ZnP(8)()(-)() or H(2)()P(8)()(-)() onto SWNT/pyrene(+) to yield the final electron donor-acceptor nanohybrids. A series of photochemical experiments confirm that long-lived radical ion pairs are formed as a product of a rapid excited-state deactivation of ZnP(8)()(-)() or H(2)()P(8)()(-)(). This formation is fully rationalized on the basis of the properties of the individual moieties. Additional modeling shows that the data are likely to be relevant to the SWNTs present in the sample, which possess wider diameters.     

Covalent sidewall functionalization of single wall carbon nanotubes

Alkyllithium reagents may be used to attach alkyl groups to the sidewalls of fluoro nanotubes. Thermal gravimetric analysis combined with UV-vis-Nir spectroscopy has been used to provide a quantitative measure of the degree of functionalization. SWNTs prepared using the HiPco process exhibit a higher degree of alkylation than SWNTs from the laser-oven method, indicating that the smaller diameter fluoro tubes are alkylated more readily. The spectral signature of the pristine SWNTs can be regenerated when the alkylated SWNTs are heated in Ar at 500 degrees C, demonstrating that dealkylation occurs at this temperature. TGA-MS analysis using a sample of n-butylated h-SWNTs showed that 1-butene and n-butane are formed during thermolysis.     

Theoretical characterization of thioepoxidated single wall carbon nanotubes

We have studied the external addition of sulfur to the walls of the (5,5) and (10,0) SWCNTs forming a cyclic thioepoxide. The binding energies are close to 32 kcal/mol, but they can be increased to 41 kcal/mol if the sulfur atoms are added forming a line along the axis of the (10,0) SWCNT. The addition of sulfur atoms to the (5,5) SWCNT alters the DOS but the tubes remains metallic. However, for the (10,0) SWCNT the exothermic addition of sulfur atoms can induce strong changes in the DOS, depending on the amount of sulfur atoms added. When we included one sulfur per 120 carbons, the (10,0) SWCNT showed metallic properties.     

Thermochemistry of fluorinated single wall carbon nanotubes.

The gradient corrected Perdew-Burke-Ernzerhof density functional in conjunction with a 3-21G basis set and periodic boundary conditions was employed to investigate the geometries and energies of C(2)F fluorinated armchair single wall carbon nanotubes (F-SWNT's) with diameters ranging from 16.4 to 4.2 A [(12,12) to (3,3)] as well as a C(2)F graphene sheet fluorinated on one side only. Using an isodesmic equation, we find that the thermodynamic stability of F-SWNT's increases with decreasing tube diameter. On the other hand, the mean bond dissociation energies of the C-F bonds increase as the tubes become thinner. The C-F bonds in the (5,5) F-SWNT's are about as strong as those in graphite fluoride (CF)(n)() and are also covalent albeit slightly (<0.04 A) stretched. Whereas a fluorine atom is found not to bind covalently to the concave surface of [60]fullerene, endohedral covalent binding is possible inside a (5,5) SWNT despite a diameter similar to that of the C(60) cage.     

Combining single wall carbon nanotubes and photoactive polymers for photoconversion

A combination of van der Waals and electrostatic interactions was used to integrate SWNT and a suitably functionalized polythiophene into nanostructured ITO electrodes. In the resulting electron donor/acceptor nanocomposites, polythiophene represents the light-harvesting chromophore that readily donates an excited-state electron to the ground-state electron-accepting SWNT. Upon illumination, monochromatic incident photoconversion efficiencies between 1.2 and 9.3% were determined for single and eight-sandwiched layers, respectively.     

Anion recognition by functionalized single wall carbon nanotubes

Amidoferrocenyl-functionalised single wall carbon nanotubes (Fc-SWNT) are efficient exoreceptors for the redox recognition of H2PO4-.     

Electrochemical unzipping of multi-walled carbon nanotubes for facile synthesis of high-quality graphene nanoribbons

Here we report a remarkable transformation of carbon nanotubes (CNTs) to nanoribbons composed of a few layers of graphene by a two-step electrochemical approach. This consists of the oxidation of CNTs at controlled potential, followed by reduction to form graphene nanoribbons (GNRs) having smooth edges and fewer defects, as evidenced by multiple characterization techniques, including Raman spectroscopy, atomic force microscopy, and transmission electron microscopy. This type of "unzipping" of CNTs (single-walled, multi-walled) in the presence of an interfacial electric field provides unique advantages with respect to the orientation of CNTs, which might make possible the production of GNRs with controlled widths and fewer defects.     

Electrochemical preparation of luminescent graphene quantum dots from multiwalled carbon nanotubes

Green luminescent, graphene quantum dots (GQDs) with a uniform size of 3, 5, and 8.2(±0.3)?nm in diameter were prepared electrochemically from MWCNTs in propylene carbonate by using LiClO(4) at 90?°C, whereas similar particles of 23(±2)?nm were obtained at 30?°C under identical conditions. Both these sets of GQDs displayed a remarkable quantum efficiency of 6.3 and 5.1?%, respectively. This method offers a novel strategy to synthesise size-tunable GQDs as evidenced by multiple characterisation techniques like transmission and scanning electron microscopy, atomic force microscopy, Raman spectroscopy and X-ray diffraction (XRD). Photoluminescence of these GQDs can be tailored by size variation through a systematic change in key process parameters, like diameter of carbon nanotube, electric field, concentration of supporting electrolyte and temperature. GQDs are promising candidates for a variety of applications, such as biomarkers, nanoelectronic devices and chemosensors due to their unique features, like high photostability, biocompatibility, nontoxicity and tunable solubility in water.     

Magnetic domain wall conduits for single cell applications

The ability to trap, manipulate and release single cells on a surface is important both for fundamental studies of cellular processes and for the development of novel lab-on-chip miniaturized tools for biological and medical applications. In this paper we demonstrate how magnetic domain walls generated in micro- and nano-structures fabricated on a chip surface can be used to handle single yeast cells labeled with magnetic beads. In detail, first we show that the proposed approach maintains the microorganism viable, as proven by monitoring the division of labeled yeast cells trapped by domain walls over 16 hours. Moreover, we demonstrate the controlled transport and release of individual yeast cells via displacement and annihilation of individual domain walls in micro- and nano-sized magnetic structures. These results pave the way to the implementation of magnetic devices based on domain walls technology in lab-on-chip systems devoted to accurate individual cell trapping and manipulation.     

Interaction between alkyl radicals and single wall carbon nanotubes

The addition of primary, secondary, and tertiary alkyl radicals to single wall carbon nanotubes (SWCNTs) was studied by means of dispersion corrected density functional theory. The PBE, B97‐D, M06‐L, and M06‐2X functionals were used. Consideration of Van der Waals interactions is essential to obtain accurate addition energies. In effect, the enthalpy changes at 298 K, for the addition of methyl, ethyl, isopropyl, and tert‐butyl radicals onto a (5,5) SWCNT are: ?25.7, ?25.1, ?22.4, and ?16.6 kcal/mol, at the M06‐2X level, respectively, whereas at PBE/6‐31G* level they are significantly lower: ?25.0, ?19.0, ?16.7, and ?5.0 kcal/mol respectively. Although the binding energies are small, the attached alkyl radicals are expected to be stable because of the large desorption barriers. The importance of nonbonded interactions was more noticeable as we moved from primary to tertiary alkyl radicals. Indeed, for the tert‐butyl radical, physisorption onto the (11,0) SWCNT is preferred rather than chemisorption. The bond dissociation energies determined for alkyl radicals and SWCNT follow the trend suggested by the consideration of radical stabilization energies. However, they are in disagreement with some degrees of functionalization observed in recent experiments. This discrepancy would stem from the fact that for some HiPco nanotubes, nonbonded interactions with alkyl radicals are stronger than covalent bonds. © 2012 Wiley Periodicals, Inc.     

Interfacing strong electron acceptors with single wall carbon nanotubes

The complementary use of steady-state and time-resolved spectroscopy in combination with electrochemistry and microscopy are indicative of mutual interactions between semiconducting SWNTs and a water-soluble strong electron acceptor, i.e., perylenediimide. Significant is the stability and the strong electronic coupling of the perylenediimide/SWNT electron donor-acceptor hybrids. Several spectroscopic and spectroelectrochemical techniques, i.e., Raman, absorption, and fluorescence, confirmed that distinct ground- and excited-state interactions occur and that kinetically and spectroscopically well characterized radical ion pair states form within a few picoseconds.     

Self-assembled lamellar structures with functionalized single wall carbon nanotubes

Highly ordered self-assembled multi-layer structures with denatured collagen wrapped single wall carbon nanotubes and surfactant systems were obtained through bioinspired methodology.     

Phenanthrene adsorption from solution on single wall carbon nanotubes

Phenanthrene was adsorbed from ethanol solution to the surface of single wall carbon nanotubes, which were previously physically and chemically characterized. Different anionic surfactants were added in the solutions to enhance the phenanthrene solubility and apparently have also improved the dispersion of two respective nanotube samples used. Adsorbed amount was determined through the concentration difference measured by UV-visible spectrophotometry. Results suggest that adsorption of phenanthrene is extremely improved in the case of nanotube purified with higher quality. These findings were confirmed by X-ray photoelectron spectroscopy. The influence of the surfactant on the adsorption kinetics of phenanthrene is suggested to be significant as well.     

The 1,3 dipolar cycloaddition of azomethine ylides to graphene,single wall carbon nanotubes,and C60

Herein, we perform a comparative study on the addition of azomethine ylides to graphene, carbon nanotubes, C₆₀, ethene, pyrene and a C₄₈H₁₈ hydrocarbon. The calculated binding energies and free energy corrections suggest that the addition of azomethine ylide to perfect graphene is not spontaneous (ΔG > 0). However, the presence of Stones–Wales defects significantly increases reactivity: the binding energy between SW‐defective graphene and the azomethine ylide is 0.83 eV, close to that determined for a (5,5) SWCNT. The electronic properties of the sheet are not modified by the 1,3 cycloaddition. The binding energies determined for the addition of an azomethine ylide to a (5,5) SWCNT are significantly lower than previously reported. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Length separation of Zwitterion-functionalized single wall carbon nanotubes by GPC

The length-fractionation of shortened (250 to 25 nm), zwitterion-functionalized, single wall carbon nanotubes (SWNTs) has been demonstrated via gel permeation chromatography (GPC). The UV-Vis spectrum of each fraction indicates an apparent "solubilization", as evident by the direct observation of all predicted optically allowed interband transitions between the mirror image spikes in the density of states of both metallic and semiconducting SWNTs with various tube diameters. As evident by the presence or absence of the 270 nm, pi-plasmon absorption, this "solubilization" is a dynamic process and leads to re-aggregation if left undisturbed for a couple of weeks or upon dissociation of the pendant octadecylamine groups. This non-destructive and highly versatile separation methodology opens up an array of possible applications for shortened SWNTs in nanostructured devices.     

单壁碳纳米管中甲烷吸附的分子模拟

采用巨正则系统MonteCarlo方法研究了甲烷在单壁碳纳米管(Singlewallcarbonnanotube,SWNT)中于低温74.05K下的吸附等温线及吸附机理,发现在两个较小的孔径(1.225nm和1.632nm)下单壁碳纳米管中甲烷的吸附有着明显的微孔所独有的“填充效应”,而在2.04nm以上的孔的吸附中会出现毛细凝聚现象。通过模拟知道发生毛细凝聚的必要条件是孔内能至少容纳下两层粒子,此外还导出在恒定温度下毛细凝聚吸附量与SWNT孔径关系。本文还模拟了常温300K下甲烷在SWNT内的吸附,对比了2.04nm和4.077nm两种孔径的SWNT吸附甲烷的等温线,推荐在4.077nm孔中的适宜吸附存储压力为5.0～6.0MPa,吸附质量分数可达16%～19%.     

Adsorption and diffusion of molecular nitrogen in single wall carbon nanotubes

Using molecular simulation, the adsorption and self-diffusion of diatomic nitrogen molecules inside a single wall carbon nanotube have been studied over a range of nanotube diameters (8.61-15.66 A) and loadings at temperatures of 100 and 298 K. Nitrogen adsorption energy is found to increase as the nanotube diameter is reduced toward the molecular diameter of nitrogen. A discrete organization of the nitrogen into adsorbed layers is observed at high loadings that follows a regular progression determined primarily by geometric considerations. The formation of an adsorbate core at the center of the nanotube is found to increase the self-diffusion of nitrogen. A "wormlike" phase is found for the adsorbed nitrogen in the (15, 0) carbon nanotube at high loadings and at 100 K.