Nickel(II) complex with 1,4,7-tris(2-aminoethyl)-1,4,7-triazacyclononane

A nickel(II) complex, [Ni(taetacn)](ClO₄)₂ ? H₂O, where taetacn = 1,4,7-tris(2-aminoethyl)-1,4,7-triazacyclononane was synthesized. The crystal structure was determined by the single-crystal X-ray diffraction method at 293 K. The complex crystallizes in the orthorhombic space group Pna2₁ with a = 16.004(2) Å, b = 10.186(1) Å, c = 13.937(2) Å, V = 2271.9(5) ų, D_x = 1.56 g cm^?3, D_m = 1.59 g cm^?3 (floatation method), and Z = 4. The R₁ [I > 2σ(I)] and wR₂ (all data) values are 0.0636 and 0.1672, respectively, for all 4845 independent reflections. The compound is composed of octahedral nickel(II) cation with three 2-aminoethyl pendant groups of taetacn, tetrahedral ClO ₄ ^? anion, and a water molecule of crystallization. Electronic spectra are consistent with the octahedral geometry. Temperature dependence of the magnetic susceptibility (4.5–300 K) can be interpreted considering the zero-field splitting of the nickel(II) ion (g = 2.14, D = 3.72 cm^?1, and Nα = 300 × 10^?6 cm³ mol^?1). Cyclic voltammetry in DMF showed quasi-reversible and irreversible oxidation waves (E_pa = 0.54 V, E_pc = 0.45 V; E_pa = 1.16 V, E_pc = 0.71 V vs. Ag/Ag⁺).     

Synthesis and properties of <Emphasis Type="Italic">N</Emphasis>-(alkenylidene)trifluoromethanesulfonamides

N-Alkenylidenetrifluoromethanesulfonamides TfN=CH–CR=C(Me)R′ (R, R′ = H, Me) have been synthesized by reaction of N-sulfinyltrifluoromethanesulfonamide TfNSO with (E)-but-2-enal, (E)-2-methylbut- 2-enal, and 3-methylbut-2-enal. Despite greater stability of N-alkenylidenetrifluoromethanesulfonamides relative to their propargyl isomers TfNHCH₂C≡CR, no rearrangement of the latter into the former occurs due to the presence of an acidic NH proton, which hampers formation of carbon-centered anion.     

Voltammetric determination of pyrocatechol at a mechanically renewed electrode made of a graphite-epoxy composite

The reversibility of a two-electron pyrocatechol/o-benzoquinone system (ΔE _p = 28 ± 1 mV) is found by cyclic voltammetry at a mechanically renewed electrode from a graphite-epoxy composite. The closeness of the found and theoretical values of ΔE _p indicates the high electrochemical activity of the graphite-epoxy composite electrode renewed in situ by cutting a thin surface layer. The potentials of pyrocatechol anodic and cathodic peaks are proportional to E ₀ ± 0.059pH in the pH range of 1–9. The pyrocatechol anodic and cathodic peak currents remain linear functions of pyrocatechol concentration in the concentration range from 0.01 to 0.08 and from 0.08 to 0.9 g/L, respectively. A procedure for the voltammetric determination of pyrocatechol in its individual solutions and in the presence of hydroquinone is proposed. Good precision and the absence of a systematic error in the determination of pyrocatechol by measuring its cathodic peak are demonstrated.     

Determination of Rutin in Drinks Using an Electrode Modified with Carbon Nanotubes-Prussian Blue

A new sensor was developed using a screen-printed carbon electrode modified with single-walled carbon nanotubes (SWCNTs) and Prussian blue (PB) coated with chitosan. The modified electrode allowed the oxidation and reduction of rutin at 0.25 and 0.096 V, respectively, with a ΔE of 0.154 V. Furthermore, the peak currents increase nearly 100% compared with the electrode without modification. The process was more reversible compared with the electrode modified with only SWCNTs or PB. Cyclic voltammetry was used to characterize the modified electrode surface. The quantification of rutin was more sensitive with adsorptive stripping voltammetry than with anodic stripping voltammetry. Adsorption potential, adsorption time and pH were optimized based on the oxidation of rutin: E_ads =–0.10 V, t_ads = 60 s, pH 3.0. The detection limit (3σ/b) was 0.01 μM and the relative standard derivation was 3%. The new sensor was used in the quantification of rutin in black tea, coffee and synthetic drink of tea with satisfactory results.     

A Systematic Search for Structures and Stabilities of Asymmetric Clusters (HfInN<Subscript>3</Subscript>)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 1-6)

In order to find single source precursors (SSP), the structures, relative stabilities, and IR spectra of small asymmetric clusters (HFInN₃) _n (n = 1–6) are systematically investigated by means of the density functional theory at the B3LYP level. The obtained geometries show that the frameworks of clusters (HFInN₃) _n (n = 2–6) prefer to be 2n-membered ring with alternating indium and α-nitrogen atoms. The averaged binding energies reveal that all of asymmetric clusters (HFInN₃) _n (n = 1–6) can continue to gain energy as the cluster size n increasing. The second-order difference of energy (Δ₂E) and the HOMO-LUMO energy gap (E_gap) as a function of the cluster size n both exhibit a pronounced even-odd alternation phenomenon. The influences of cluster size n and temperature T on the thermodynamic properties of clusters are discussed. Judged by enthalpies and Gibbs free energies, the formations of the most stable clusters (HFInN₃) _n (n = 2–6) from the monomer are thermodynamically favorable in the range of 200–800 K.     

Synthesis and redox characteristics of iron complexes with triphenylsubstituted corrols in the presence of argon and oxygen

para-Substituted iron meso-triphenylcorrole derivatives [Fe(ms-p-R-Ph)₃Cor] containing electron- donating (R = OMе) and electron-drawing (R = NO₂) groups in phenyl rings are synthesized and characterized by ¹H NMR, electronic absorption spectroscopy, and mass spectrometry. The effect of the nature of functional groups within iron complexes on the redox processes involving these complexes in water–alkaline solutions is analyzed. Electronic transitions in the ligand (E_red/ox = 0.820–0.850 V) and the metal (E_red/ox =–0.005 to–0.190 and–0.790 to–0.870 V for the Fe⁴⁺ ? Fe³⁺ and Fe³⁺ ? Fe²⁺ transitions, respectively) were found in the cyclic voltammograms. Iron in the synthesized complexes I–IV under the conditions under study exists in the +4 oxidation state. The activity of iron complexes in electroreduction of molecular oxygen significantly depends on the nature of a substituent, increases in the series: Fe(ms-p-NO₂Ph)₃Cor (II) < Fe(ms-p-MeOPh)₃Cor (I) < Fe(β-Br)₈(ms-Ph)₃Cor (IV) < Fe(ms-Ph)₃Cor (II) and is caused by the fact that low-energy redox electron transitions occur in the molecules. The electrocatalytic activity of iron corroles is much higher than that of metal porphyrins with a similar structure.     

Voltammetric determination of dihydroxybenzenes at a mechanically renewed electrode made from a graphite-epoxy composite

Differences of potentials of anodic and cathodic peaks (ΔE _p) are determined in cyclic voltammograms of dihydroxybenzene/p-benzoquinone redox systems at an electrode made of a graphite-epoxy composite in a wide pH range. The data obtained (ΔE _p = 29 ± 1 mV) are close to the thermodynamic values for two-electron reversible reactions. This indicates that the electrode mechanically renewed by cutting a 0.5-μm surface layer directly in a test solution exhibits a high activity in such electrochemical reactions. The potentials of anodic and cathodic peaks are proportional to the pH of the supporting electrolyte solution in the range from 1.0 to 9.0. A change of 58 ± 1 mV in E _p per unit pH for all isomers shows that the first stage of the oxidation of each dihydroxybenzene isomer involves one electron and is accompanied by the detachment of one hydrogen ion, that is, an intermediate oxidation product, semiquinone, is formed. Despite the closeness of the potentials of hydroquinone and pyrocatechol peaks (ΔE = 100 mV), a scheme is proposed for the selective voltammetric determination of dihydroxybenzene isomers in a 0.1 M HCl solution in hydroquinone-pyrocatechol, pyrocatechol-resorcinol, and hydroquinone-resorcinol binary mixtures. The concentrations of hydroquinone and pyrocatechol are found from cathodic peaks and that of resorcinol, from the anodic peak. The results are well reproducible and contain no systematic error.     

DFT study on oxidation of HS(CH<Subscript>2</Subscript>)<Subscript> <Emphasis Type="Italic">m</Emphasis> </Subscript>SH (<Emphasis Type="Italic">m</Emphasis> = 1–8) in oxidative desulfurization

Density functional theory was employed for calculation of HS(CH₂)_mSH (m = 1–8) and its derivatives at B3LYP method at 6-31++g (d,p) level. Using eigenvalues of LUMO and HOMO for HS(CH₂)_mSH, the standard electrode potentials were estimated by a stepwise multiple regression techniques (MLR), and obtained as E° = 1.500 + 7.167 × 10^–3 HOMO–0.229 LUMO with high correlation coefficients of 0.973 and F values of 43.973.     

Synthesis,Crystal Structure,and Antibacterial Activity of a Dinuclear Oxidovanadium(V) Complexes Derived from 2-[(2-Methylaminoethylimini)methyl]- 4-Trifluoromethoxyphenol

A new dinuclear oxidovanadium(V) complex, [V₂O₂(μ-O)₂L₂], where L is the monoanionic form of 2-[(2-methylaminoethylimini)methyl]-4-trifluoromethoxyphenol (HL), was prepared and characterized by IR, UV-Vis and ¹H NMR spectra, as well as single crystal X-ray diffraction (CIF file CCDC no. 1567062). The complex crystallizes as the monoclinic space group P2₁/c with unit cell dimensions a = 12.974(3), b = 6.572(2), c = 17.205(3) Å, β = 107.300(3)°, V = 1400.7(5) ų, Z = 2, R₁ = 0.0879, wR₂ = 0.1208, GOOf = 1.068. X-ray analysis indicates that the complex is a centrosymmetric dinuclear oxidovanadium(V) species with the V atoms in octahedral coordination. The Schiff base and the complex were evaluated for their antibacterial (Bacillus subtilis, Staphylococcus aureus, Escherichia coli, and Pseudomonas fluorescence) activities. The complex has the most activity against B. subtilis with the MIC value of 1.2 μg mL^–1.     

The crystal structure of [Mg(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>][VO(edta)] · 3.5H<Subscript>2</Subscript>O

The crystal structure of complex [Mg(H₂O)₆][VO(edta)] · 3.5H₂O (I) was determined by X-ray diffraction study. The crystals are monoclinic, a = 6.779 Å, b = 13.373(6) Å, c = 25.054 Å, β = 96.55°, Z = 4, space group P2₁. The unit cell contains two independent [VO(edta)]^2? anions, two independent [Mg(H₂O)₆]²⁺ cations, and seven crystal-water molecules. The coordination polyhedron of each vanadium atom is formed by five donor atoms of the edta ligand (2N + 3O) (V(1)-N(1), 2.278 Å; V(1)-N(2), 2.149 Å; V(2)-N(3), 2.301 Å; V(2)-N(4), 2.165 Å; V-O(acet), 2.00 ± 0.02 Å) and the oxygen atom of the oxo group (V-O, 1.60 ± 0.01 Å). The edta ligands and the vanadium atom form three glycinate rings: two R-type rings and one G-type ring (one acetate branch remains free), as well as an E-type ring with an asymmetric gauche configuration. The [Mg(H₂O)₆] cations are slightly distorted octahedra (Mg-O, 2.013–2.132 Å, the OMgO angles are 86.6°–94.2°). The H₂O molecules form a bifurcate system of H-bonds. The crystals of compound I belong to OD-type structures with an incomplete ordering of layers.     

Steric structure of alkyl 2-aryl(hetaryl)hydrazono-3-fluoroalkyl-3-oxopropionates

Steric structure of fluorinated 2-arylhydrazono-3-oxo esters was studied by ¹H, ¹⁹F, and ¹³C NMR spectroscopy and X-ray analysis. It was found that these compounds in the crystalline state and in solutions in acetone-d ₆, DMSO-d ₆, and CDCl₃ exist as Z isomers with the ester fragment involved in intramolecular hydrogen bond with the hydrazone NH proton. Exceptions are alkyl 2-arylhydrazono-4,4-difluoro-3-oxobutanoates which exist in acetone-d ₆ as mixtures of Z and E isomers, the former prevailing. Unlike fluorinated analogs, ethyl 2-(4-methylphenyl)hydrazono-3-oxobutanoate in crystal has the structure of E isomer in which intramolecular hydrogen bond is formed between the NH proton and acetyl carbonyl group. The same compound in acetone-d ₆, DMSO-d ₆, and CDCl₃ gives rise to a mixture of Z and E isomers, the latter prevailing.     

On Gold(I) Complexes and Anodic Gold Dissolution in Sulfite–Thiourea Solutions

Processes involving gold(I) complexes were studied in sulfite–thiourea (TU) solutions. It is shown that at pH >5 the complex [\( {\text{AuTU}}_{2}^{ + } \)] undergoes irreversible decomposition followed by deprotonation and formation of a solid phase. From the data of pH in mixed solutions, the equilibrium constants were evaluated: \( {\text{Au}}({\text{SO}}_{3} )_{2}^{3 - } + i{\text{TU}} \rightleftharpoons {\text{Au}}({\text{SO}}_{3} )_{2 - i} {\text{TU}}_{i}^{2i - 3} + i{\text{SO}}_{3}^{2 - } \), log₁₀ β ₁ = ?1.2, log₁₀ β ₂ = ?3.6. Some aspects of the anodic dissolution of gold in mixed sulfite–thiourea solutions are considered. With the help of the carbonate buffer system the change of the anodic current density j _a was studied at high pH; j _a (pH) has a maximum at pH 11.6–11.9 for E _a = 0.3–0.6 V (vs. NHE). At pH > 12.0, the j _a values decrease sharply. Possible mechanisms of anodic gold dissolution, as well as the role of sulfite, are discussed.     

The assignment of signals in the EPR spectra of axially symmetrical quintet dinitrenes

Fine structure levels in an external magnetic field and angular dependences of resonance magnetic fields on the direction of an external magnetic field were calculated for two axially symmetrical quintet dinitrenes with the zero-field splitting parameters D _q = 0.260 cm^?1, E _q = 0.000 and D _q = 0.243 cm^?1, E _q = 0.003 cm^?1. The EPR spectra of such dinitrenes contained lines of only three xy transitions (xy ₁, xy ₂, and xy ₄), two Δm _s = ±2 transition lines between the W _?2 and W ₀ sublevels, and three additional lines from noncanonically oriented molecules whose magnetic axis Z made an angle of 12°–16° or 52°–54° with an external magnetic field.     

Electronic structure and energy decomposition of binuclear transition metal complexes containing β-diketiminate and imido ligands: spin state and metal’s nature effects

DFT calculations with full geometry optimization using BP86-D and OPBE functionals have been performed on series of [(BDI)M(NH)]₂(Bz) and [(BDI)M(NH)]₂(Tol) (M = Ti, V, Nb, Cr, Mn, Fe, Co, and Ni; BDI = β-diketiminate; NH = imido group; Bz = benzene; and Tol = toluene) of various spin states (singlet S = 0, triplet S = 1, quintet S = 2, and singlet S = 0 of broken symmetry method). Depending on the metal nature and its electron count and the spin state, the six-membered ring in [(BDI)M(NH)]₂(Bz) and [(BDI)M(NH)]₂(Tol) adopts various hapticities that involve full or partial coordination, giving rise to a flat or a distorted ring, respectively. The NH^2? imido group is linear or bent with respect to its sp or sp² hybridization acting as a six- or a four-electron donor, respectively. The (BDI)^? anion is a bidentate ligand as a six-electron donor. The optimized geometries do not show direct metal-metal bonding and correspond to long separations. The optimized structures for Nb metal are comparable to the available experimental ones. The Ziegler-Rauk energy decomposition analysis scheme was employed to characterize the geometry distortion, the steric interaction (electrostatic and Pauli), and the orbital interaction terms in the total bonding energy. The results showed that the interaction terms in all the studied complexes are governed by one third covalent and two thirds ionic characters, which are in agreement with the ΔE_elstat (electrostatic) and ΔE_orb (orbital) contributions, respectively, into the total attractive interaction (ΔE_elstat + ΔE_orb).     

The relation between the potential of zero charge and work function for <Emphasis Type="Italic">sp</Emphasis>-metals

It is shown that for numerous sp-metals there exists no unified work function (W _e) dependence of the potential of zero charge E _{q = 0} and the potential drop characterizing the metal lyophilic behavior Δ _M ^Hg E _chem) _{q = 0}. The reason is that the metal work function is by no means the only factor affecting the value of E _{q = 0}. The quantities E _{q = 0} and (Δ _M ^Hg E _chem) _{q = 0} depend also on the distance of the solvent dipoles’ closest approach to metal surfaces (d _ms) in the absence of the metal-solvent chemisorption interaction. When the metal-solvent chemisorption interaction is involved, this distance affects the degree of overlapping of the metal’s acceptor levels and the upper occupied donor levels in the solvent molecules. To reliably investigate the effect of any of these factors on E _{q = 0}, the other one should be fixed up. It is shown, by example of Ga-, Bi-Gaand Sn-Ga-electrodes, as well as Pb-Ga-, In-Ga-, and Cd-Ga-electrodes demonstrating very close values of the “electrochemical work function” that the metal-solvent chemisorption interaction becomes stronger with the decreasing of d _ms. The influence of this factor is intensified with the increasing of the solvent’s donor number DN. The W _e dependence of E _{q = 0} and (Δ _M ^Hg E _chem) _{q = 0} can be traced by example of metals with nearly equal d _ms values, e.g., Tl-Ga, In-Ga, and Ga. In all studied solvents, the deviation of E _{q = 0} from W _e increased in the series Tl-Ga < In-Ga < Ga, that is, with the increasing of the metal’s work function in vacuum. The effect is intensified with the increasing of the solvent’s DN. The obtained results agree with the concept of donor-acceptor nature of the metal-solvent chemisorption interaction.     

Micromechanism of Cu and Fe alloying process on the martensitic phase transformation of NiTi-based alloys: First-principles calculation

Using first-principles pseudo-potential plane wave method, the formation enthalpy ΔH, binding energy ΔE, elastic constants, and electronic structure were calculated and analyzed carefully for NiTiX (X = Cu, Fe) shape memory alloy. The results show that the Cu or Fe element prefers to occupy the Ni site in the NiTi matrix phase respectively. Compared with the NiTi matrix phase, the ΔH, ΔE, c ₄₄ and c′ of NiTi (Cu) are similar to each other. However, the structural stability of the NiTi phase is improved obviously by the Fe alloying process. Simultaneously, the shear modulus c ₄₄ and c′ of NiTi (Fe) are larger than those of the NiTi matrix phase. Furthermore, Milliken population results indicate that Q _Cu–Ti is smaller than Q _Ni–Ti after the Cu alloying process, but Q _Fe–Ti is larger than Q _Ni–Ti. The electron density difference shows that some covalent bonding exists between Fe and Ti elements. Based on the upward analysis, the difference in the phase stability and elastic constants of NiTiX (X = Cu, Fe) is the substantial mechanism for the different M _s of NiTiX (X = Cu, Fe) although Cu or Fe substitutes for the same atom Ni elements in the NiTi matrix phase.     

Electron density distribution in crystals of the antimony(V) spiroendoperoxide complexes

The experimental and theoretical electron densities in complexes [6-(2,6-di-iso-propylphenyl)imino-2,4-di-tert-butylcyclohexa-2,4-diene-1-peroxo-1-olato-N,O,O′]tris(p-chlorophenyl)antimony(V), (p-Cl–C₆H₄)₃Sb(2,6-iso-Pr–Ph–AP) · O₂ (I), and [6-(2,6-dimethylphenyl)imino-2,4-di-tert-butylcyclohexa-2,4-diene-1-peroxo-1-olato-N,O,O′]tris(p-chlorophenyl)antimony(V), (p-Cl–C₆H₄)₃Sb(2,6-Me–Ph–AP) · O₂ (II), where AP is 4,6-di-tert-butyl-N-o-iminobenzoquinone dianion, are studied on the basis of high-resolution X-ray diffraction data and theoretical calculations using the density functional theory (B3LYP/DGDZVP). The nature of chemical bonds and the charge distribution on atoms are studied, and the energy of molecular oxygen addition to the Sb(V) o-aminophenolate complexes is estimated. The structures are deposited with the Cambridge Crystallographic Data Centre (CIF files CCDC nos. 1560600 (spherical refinement) and 1560601 (multipole refinement) for complex I; 1560602 (spherical) and 1560603 (multipole) for complex II).     

Chromium ion incorporation in the crystal structure of BGO

Comprehensive investigations have been performed by EPR and optical spectroscopy for Bi₃GeO₄ crystals doped with chromium ions. It is demonstrated that the known optical absorption spectrum for chromium ions, specifically, the triplet in the region 600–900 nm has an analog in the EPR spectra — the center with electron spin S = 1. The spectrum is described by the spin-Hamiltonian with the parameters D = 550 G, E = 10 G, g _xx = g _yy = 1.915, g _zz = 1.932. The EPR spectrum is dictated by Cr⁴⁺ incorporation at the germanium sites. Luminescence observed in the region 1.2–1.7 μm is also caused by transitions of Cr⁴⁺ with tetrahedral surroundings to germanium sites. Original Russian Text Copyright ? 2005 N. V. Chernei, V. A. Nadolinnyi, N. V. Ivannikova, V. A. Gusev, I. N. Kupriyanov, V. N. Shlegel, and Ya. V. Vasiliev __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 46, No. 3, pp. 444–450, May–June, 2005.