Nanostructured PdRu/C catalysts for formic acid oxidation

Pd and bimetallic PdRu nanoparticles supported on Vulcan XC-72 carbon prepared by the microwave-assisted polyol process are examined as electrocatalysts for the electrooxidation of formic acid. The catalysts are characterized by transmission electron microscopy and X-ray diffraction. The Pd and PdRu nanoparticles with sizes of <10 nm display the characteristic diffraction peaks of a Pd face-centered cubic (fcc) crystal structure. It is found that the addition of Ru to Pd/C can decrease the lattice parameter of Pd (fcc) crystal. The electrocatalytic activities of the catalysts are evaluated in sulfuric acid solution containing 1 M formic acid using linear sweeping voltammetry and chronoamperometry. The results show that Pd₅Ru₁/C displays the best electrocatalytic performance among all catalysts for formic acid electrooxidation.     

Pt/Ni(OH)2–NiOOH/Pd multi-walled hollow nanorod arrays as superior electrocatalysts for formic acid electrooxidation

The catalytic activity and durability are crucial for the development of high-performance electrocatalysts. To design electrocatalysts with excellent electroactivity and durability, the structure and composition are two important guiding principles. In this work, novel Pt/Ni(OH)₂–NiOOH/Pd multi-walled hollow nanorod arrays (MHNRAs) are successfully synthesized. The unique MHNRAs provide fast transport and short diffusion paths for electroactive species and high utilization rate of catalysts. Because of the special surface and synergistic effects, the Pt/Ni(OH)₂–NiOOH/Pd MHNRA electrocatalysts exhibit high catalytic activity, high durability and superior CO poisoning tolerance for the electrooxidation of formic acid in comparison with Pt@Pd MHNRAs, commercial Pt/C, Pd/C and PtRu/C catalysts.     

Pd/Pt core–shell nanowire arrays as highly effective electrocatalysts for methanol electrooxidation in direct methanol fuel cells

Highly ordered Pd/Pt–core–shell nanowire arrays (Pd/Pt NWAs) have been prepared by anodized aluminum oxide (AAO) template-electrodeposition and magnetron sputtering methods. Pd/Pt NWA electrode shows a very high electrochemical active surface area and high electrocatalytic activity for the methanol electrooxidation in acid medium for direct methanol fuel cells (DMFCs). The mass specific anodic peak current density is 756.7 mA mg⁻¹ Pt for the methanol oxidation on the Pd/Pt NWA electrode, an increase by a factor of four as compared to conventional E-TEK PtRu/C electrocatalysts. The mechanism of the significant enhancement of the Pd/Pt core/shell NWA nanostructure in the efficiency and electrocatalytic activity of Pt for the methanol electrooxidation in acid medium is discussed.     

Physical and morphological characteristics and electrochemical behaviour in PEM fuel cells of PtRu /C catalysts

Platinum-ruthenium catalysts supported on carbon (PtRu/C) have been characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), specific surface area analysis (BET), X-ray photoelectron spectroscopy (XPS) and in proton exchange membrane (PEM) fuel cell tests. The results indicate the presence of strong metal-carbon interactions, which hinder the formation of a single-phase face-centered cubic (fcc) PtRu alloy. The particle size of the PtRu/C catalysts was smaller than both carbon-supported platinum (Pt/C) and ruthenium (Ru/C) catalysts. In the bimetallic electrocatalysts the intercrystallite distance decreased with respect to pure Pt and Ru metals. PEM fuel cell tests in H₂/air operation mode revealed a decrease of performance with increasing carbon content of the catalyst, at a fixed Pt loading. In H₂ + 100 ppm CO/air operation mode the maximum performance of the PEM fuel cell was attained at 0.63 atomic fraction Ru. Received: 2 December 1999 / Accepted: 27 January 2000     

碳载Pt和PtRu催化剂的甲醇电氧化比较

利用电化学方法对商用Pt/C和PtRu/C催化剂在酸性介质中的甲醇电氧化进行了比较研究.动电位和恒电位氧化实验结果皆表明PtRu/C比Pt/C对甲醇电催化活性高.PtRu合金的形成不仅改变了催化剂表面对氢的吸附性质,而且使氧化物还原峰电位向阴极方向移动.Ru与甲醇的相互作用为温度活化过程,需要较高的温度.     

阵列纳米管中铂:钌原子比对甲醇电催化氧化活性的影响（英文）

采用电化学沉积技术在3-氨丙基三甲基硅氧烷修饰的多孔氧化铝膜板中制备了具有不同Pt/Ru原子比的双元Pt/Ru阵列纳米管电极（NTAEs）。分别用X-射线衍射和扫描电镜表征了催化剂结构和形态。电化学结果表明：通过控制前驱沉积液的浓度可得到不同PtRu原子比的NTAEs。所制备的Pt 或 Pt/Ru合金阵列纳米电极的真实表面积大,催化活性强,有利于物质传输,对甲醇电氧化显示出显著的催化性能。实验中还系统研究了催化剂组成与CO和CH3OH电催化氧化性能的关系,发现Pt/Ru=50:50的阵列纳米管电极对CO电氧化显示出最好的催化活性;对甲醇电氧化,则Ru原子比为40%的催化剂显示最佳催化性能。     

Heat-induced alterations in the surface population of metal sites in bimetallic nanoparticles

The ability to alter the surface population of metal sites in bimetallic nanoparticles (NPs) is of great interest in the context of heterogeneous catalysis. Here, we report findings of surface alterations of Pt and Ru metallic sites in bimetallic carbon-supported (PtRu/C) NPs that were induced by employing a controlled thermal-treatment strategy. The thermal-treatment procedure was designed in such a way that the particle size of the initial NPs was not altered and only the surface population of Pt and Ru was changed, thus allowing us to deduce structural information independent of particle-size effects. X-ray absorption spectroscopy (XAS) was utilized to deduce the structural parameters that can provide information on atomic distribution and/or extent of alloying as well as the surface population of Pt and Ru in PtRu/C NPs. The PtRu/C catalyst sample was obtained from Johnson Matthey, and first the as-received catalyst was reduced in 2 % H2 and 98 % Ar gas mixture at 300 degrees C for 4 h (PtRu/C as-reduced). Later this sample was subjected to thermal treatment in either oxygen (PtRu/C-O2-300) or hydrogen (PtRu/C-H2-350). The XAS results reveal that when the as-reduced PtRu/C catalyst was exposed to the O2 thermal-treatment strategy, a considerable amount of Ru was moved to the catalyst surface. In contrast, the H2 thermal-treatment strategy led to a higher population of Pt on the PtRu/C surface. Characterization of the heat-treated PtRu/C samples by X-ray diffraction and transmission electron microscopy reveals that there is no significant change in the particle size of thermally treated samples when compared to the as-received PtRu/C sample. The electrochemical properties of the as-reduced and heat-treated PtRu/C catalyst samples were confirmed by cyclic voltammetry, CO-adsorption stripping voltammetry, and linear sweep voltammetry. Both XAS and electrochemical investigations concluded that the PtRu/C-H2-350 sample exhibits significant enhancement in reactivity toward methanol oxidation as a result of the increased surface population of the Pt when compared to the PtRu/C-O2-300 and PtRu/C as-reduced samples.     

Segregation and Stability in Surface Alloys: PdxRu1−x/Ru(0001) and PtxRu1−x/Ru(0001)

The stability of PdRu/Ru(0001) and PtRu/Ru(0001) surface alloys and the tendency for surface segregation of Pd and Pt subsurface guest metals in these surface alloys is studied by scanning tunneling microscopy (STM) and Auger electron spectroscopy (AES). Atomic resolution STM imaging and AES measurements reveal that upon overgrowing the surface alloys with a 1–2 monolayer Ru film and subsequent annealing to the temperatures required for initial surface alloy formation, the Ru‐covered Pd (Pt) atoms float back to the outermost layer. The lateral distribution of these species is also essentially identical to that of the initial surface alloys, before overgrowth by Ru. In combination, this clearly demonstrates that the surface alloys represent stable surface configurations, metastable only towards entropically favored bulk dissolution, and that there is a distinct driving force for surface segregation of these species. Consequences of these data on the mechanism for surface alloy formation are discussed.     

PtRu/carbon nanotube nanocomposite synthesized in supercritical fluid: a novel electrocatalyst for direct methanol fuel cells

Platinum/ruthenium nanoparticles were decorated on carbon nanotubes (CNT) in supercritical carbon dioxide, and the nanocomposites were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). TEM images show that the particles size is in the range of 5-10 nm, and XRD patterns show a face-centered cubic crystal structure. Methanol electrooxidation in 1 M sulfuric acid electrolyte containing 2 M methanol were studied onPtRu/CNT (Pt, 4.1 wt%; Ru, 2.3 wt%; molar ratio approximately Pt/Ru = 45:55) catalysts using cyclic voltammetry, linear sweep voltammetry, chronoamperometry, and electrochemical impedance spectroscopy. All the electrochemical results show that PtRu/CNT catalysts exhibit high activity for methanol oxidation which resulted from the high surface area of carbon nanotubes and the nanostructure of platinum/ruthenium particles. Compared with Pt/CNT, the onset potential is much lower and the ratio of forward anodic peak current to reverse anodic peak current is much higher for methanol oxidation, which indicates the higher catalytic activity of PtRu/CNT. The presence of Ru with Pt accelerates the rate of methanol oxidation. The results demonstrated the feasibility of processing bimetallic catalysts in supercritical carbon dioxide for fuel cell applications.     

Synthesis of PtRu nanoparticles from the hydrosilylation reaction and application as catalyst for direct methanol fuel cell

Nanosized Pt, PtRu, and Ru particles were prepared by a novel process, the hydrosilylation reaction. The hydrosilylation reaction is an effective method of preparation not only for Pt particles but also for other metal colloids, such as Ru. Vulcan XC-72 was selected as catalyst support for Pt, PtRu, and Ru colloids, and TEM investigations showed nanoscale particles and narrow size distribution for both supported and unsupported metals. All Pt and Pt-rich catalysts showed the X-ray diffraction pattern of a face-centered cubic (fcc) crystal structure, whereas the Ru and Ru-rich alloys were more typical of a hexagonal close-packed (hcp) structure. As evidenced by XPS, most Pt and Ru atoms in the nanoparticles were zerovalent, except a trace of oxidation-state metals. The electrooxidation of liquid methanol on these catalysts was investigated at room temperature by cyclic voltammetry and chronoamperometry. The results concluded that some alloy catalysts showed higher catalytic activities and better CO tolerance than the Pt-only catalyst; Pt56Ru44/C have displayed the best electrocatalytic performance among all carbon-supported catalysts.     

Studies on State and Structure of Noble Metals in Electrocatalyst Made by Coprecipitation Method

The electrocatalysts of Pt/C,PtRu/C and Ru/C were prepared by the impregnation method.The facet characterization.The dispersion and the particle size for the catalysts were determined by means of X-ray diffraction and transmission electron microscopy,X-ray photoelectron spectroscopy was also used to analyze the state and the valency of the noble metals.The results show that the particle size was in nanometer range and the binary metals have come into being an alloy.The platinum in the catalysts existed in zero valency.The valency of the ruthenium on the surface is different from that in the body,while the ruthenium on the surface existed in oxide-form.PtRu/C and Pt/C are of good activity of the electrooxidation of hydrogen except Ru/C.PtRu/C is more tolerant of CO than Pt/C,and CO is only adsorbed on Pt.     

Pd/C promoted by Au for 2-propanol electrooxidation in alkaline media

Pd/C catalysts promoted by Au are investigated as electrocatalysts for the direct 2-propanol fuel cells in alkaline media. The results show that Pd is a good electrocatalyst for 2-propanol oxidation and the activity for 2-propanol electrooxidation is higher than that for methanol electrooxidation on the Pd/C electrocatalysts in alkaline media. Addition of Au can significantly increase the palladium catalytic activity and stability for the 2-propanol oxidation. PdAu4:1/C has higher electrocatalytic activity and better stability for the electrooxidation of 2-propanol than Pd/C and E-TEK Pt/C electrocatalysts. The present study shows the promising properties of Au promoted Pd/C as effective electrocatalysts for 2-propanol fuel based direct alcohol fuel cells.     

Polymer-Protected Bimetallic Clusters. Preparation and Application to Catalysis

Colloidal dispersions of polymer-protected Pd/Pt and Pd/Au bimetallic clusters were prepared by reduction of an alcoholic solution of PdCl₂ and H₂PtCl₆ or HAuCl₄ in the presence of poly(N-vinyl-2-pyrrolidone). The reduction can be carried out by refluxing in alcohol or by irradiation with visible light. The dispersions of the bimetallic clusters obtained are stable for months at room temperature and have from dark brown to brownish red color. Transmission electron micrographs show that the bimetallic clusters are composed of well-dispersed ultrafine particles of uniform size, about 1.5 nm for Pd-Pd and 3.4 nm for Pd-Au in diameter. The catalytic activity of the bimetallic clusters depends on the metal composition. In the case of the partial hydrogenation of 1, 3-cyclooctadiene, the activity went through a maximum when the alloy composition reached about 80% Pd and 20% Pt, or 60% Pd and 40% Au.     

Bimetallic Cluster Provides a Higher Activity Electrocatalyst for Methanol Oxidation

The cluster complex Pt₂Ru₄(CO)₁₈ was used as a precursor to prepare a 60 wt% 1:2 Pt:Ru nanoparticles on carbon (PtRu/C) for use as an electrocatalyst for methanol oxidation. This bimetallic carbonyl cluster complex was found to provide smaller, more uniform bimetallic nanoparticle that exhibited higher electrocatalytic activity than a 60 wt% 1:1 Pt:Ru commercial catalyst from E-Tek. Using bimetallic cluster precursors simplifies the synthetic procedures by reducing the need for high temperature reduction and assures a more intimate mixing of the two different metals. Transmission electron microscopy (TEM) images of the catalyst obtained from the cluster precursor showed bimetallic nanoparticles having a narrow size range of 2–3 nm that were dispersed uniformly over the surface of the support. Images of the commercial catalyst showed particles 3–4 nm in diameter that tended to agglomerate near the edges of the carbon support particles. Cyclic voltammograms of methanol oxidation from the two catalysts showed significantly higher activity for the cluster-derived catalyst. The onset potential for methanol oxidation for the cluster-derived catalyst was approximately 170 mV lower than that of the commercial catalyst at 100 A/g Pt, and approximately 250 mV lower at 400 A/g Pt. ^* This report is dedicated to Prof. Günter Schmid on the occasion of his 70th birthday.     

Catalysts of ethanol anodic oxidation for ethanol-air fuel cell with a proton-conducting polymer electrolyte

Synthesis techniques for binary PtSn, PdM (M = Sn, V, Mo) and ternary PtSnNi, PtRuSn catalysts of ethanol electrooxidation on highly dispersed carbon materials are suggested. The highest activity in the 0.5 M H₂SO₄ solution containing 1 M C₂H₅OH corresponds to the system of PtSn (3: 1, 40 wt % Pt) with the particle size of 2–4 nm and tin content in the alloy with platinum of about 6%. It was shown that the catalyst efficiency as regards ethanol oxidation depth decreases in the series of Pt > PtRu ≈ PtSn, and the catalyst activity by current forms the series of PtSn > PtRu > Pt. The membrane-electrode assembly (MEA) with the anodes on the basis of the PtSn (3: 1, 40 wt % Pt) catalyst had stable characteristics for 220 h at the current density of ∼50 mA/cm².     

Electrochemical oxidation of methanol using dppm-bridged Ru/Pd, Ru/Pt and Ru/Au catalysts

The electrochemical oxidation of methanol was carried out using a series of dppm-bridged Ru/Pd, Ru/Pt and Ru/Au heterobimetallic complexes as catalysts. The major oxidation products were formaldehyde dimethyl acetal (dimethoxymethane, DMM) and methyl formate (MF). The Ru/Pd and Ru/Pt bimetallic catalysts generally afforded lower product ratios of DMM/MF and higher current efficiencies than the Ru/Au catalysts. The Ru/Au bimetallics exhibited product ratios and current efficiencies similar to those obtained from the Ru mononuclear compound CpRu(PPh(3))(2)Cl. Increasing the methanol concentration afforded higher current efficiencies, while the addition of water to the samples shifted the product distribution toward the more highly oxidized product, MF.     

Heteropolymetallic Architectures as Snapshots of Transmetallation Processes at Different Degrees of Transfer

Novel heteropolymetallic architectures have been built by integrating Pd, Au and Ag systems. The dinuclear [(CNC)(PPh₃)Pd-^G11M(PPh₃)](ClO₄) (^G11M=Au ( 3 ), Ag ( 4 ); CNC=2,6-diphenylpyridinate) and trinuclear [{(CNC)(PPh₃)Pd}₂^G11M](ClO₄) (^G11M=Au ( 6 ), Ag ( 5 )) complexes have been accessed or isolated. Structural and DFT characterization unveil striking interactions of one of the aryl groups of the CNC ligand(s) with the ^G11M center, suggesting these complexes constitute models of transmetallation processes. Further analyses allow to qualitatively order the degree of transfer, proving that Au promotes the highest one and also that Pd systems favor higher degrees than Pt. Consistently, Energy Decomposition Analysis calculations show that the interaction energies follow the order Pd−Au > Pt−Au > Pd−Ag > Pt−Ag. All these results offer potentially useful ideas for the design of bimetallic catalytic systems.     

Catalytic activity and stability toward methanol oxidation of PtRu/CNTs prepared by adsorption in aqueous solution and reduction in ethylene glycol

In this paper, we reported an improved process for the preparation of PtRu/CNTs, which involves the adsorption of Pt and Ru ions on CNTs in aqueous solution and the reduction of the adsorbed Pt and Ru ions on CNTs in ethylene glycol. The surface morphology, structure, and compositions of the prepared catalyst were studied by transmission electron microscopy (TEM), X-ray diffraction (XRD), and energy-dispersive spectrometer. TEM observation showed that the particles size of the prepared PtRu alloy was in the range of 2–5 nm, XRD patterns confirmed a face-centered cubic crystal structure. The activity and stability of the prepared catalyst toward methanol oxidation were studied in 0.5 M H₂SO₄ + 1 M CH₃OH solution by cyclic voltammetry, chronoamperometry, and chronopotentiometry. The electrochemical results showed that the prepared catalyst exhibited higher activity and stability toward methanol oxidation than commercial PtRu/C with the same loading amount of Pt and Ru.     

In-situ X-ray absorption spectroscopy study of Pt and Ru chemistry during methanol electrooxidation

Methanol electrooxidation in a 0.5 M sulfuric acid electrolyte containing 1.0 M CH3OH was studied on 30% Pt/carbon and 30% PtRu/carbon (Pt/Ru = 1:1) catalysts using X-ray absorption spectroscopy (XAS). Absorption by Pt and Ru was measured at constant photon energy in the near edge region during linear potential sweeps of 10-50 mV/s between 0.01 and 1.36 V vs rhe. The absorption results were used to follow Pt and Ru oxidation and reduction under transient conditions as well as to monitor Ru dissolution. Both catalysts exhibited higher activity for methanol oxidation at high potential following multiple potential cycles. Correlation of XAS data with the potential sweeps indicates that Pt catalysts lose activity at high potentials due to Pt oxidation. The addition of Ru to Pt accelerates the rate of methanol oxidation at all potentials. Ru is more readily oxidized than Pt, but unlike Pt, its oxidation does not result in a decrease in catalytic activity. PtRu/carbon catalysts underwent significant changes during potential cycling due to Ru loss. Similar current density vs potential results were obtained using the same PtRu/carbon catalyst at the same loading in a membrane electrode assembly half cell with only a Nafion (DuPont) solid electrolyte. The results are interpreted in terms of a bifunctional catalyst mechanism in which Pt surface sites serve to chemisorb and dissociate methanol to protons and carbon monoxide, while Ru surface sites activate water and accelerate the oxidation of the chemisorbed CO intermediate. PtRu/carbon catalysts maintain their activity at very high potentials, which is attributed to the ability of the added Ru to keep Pt present in a reduced state, a necessary requirement for methanol chemisorption and dissociation.     

Au Nanoparticles Modified with Pt,Ru and SnO2 as Electrocatalysts for Ethanol Oxidation Reaction in Acids

The anodic reaction in direct ethanol fuel cells (DEFCs), ethanol oxidation reaction (EOR) faces challenges, such as incomplete electrooxidation of ethanol and high cost of the most efficient electrocatalyst, Pt in acidic media at low temperature. In this study, core‐shell electrocatalysts with an Au core and Pt‐based shell (Au@Pt) are developed. The Au core size and Pt shell thickness play an important role in the EOR activity. The Au size of 2.8 nm and one layer of Pt provide the most optimized performance, having 6 times higher peak current density in contrast to commercial Pt/C. SnO₂ as a support also enhances the EOR activity of Au@Pt by 1.73 times. Further modifying the Pt shell with Ru atoms achieve the highest EOR current density that is 15 and 2.5 times of Pt/C and Au@Pt. Our results suggest the importance of surface modification in rational design of advanced electrocatalysts.