黏弹性胶粘涂层-基底结构中激光激发类瑞利波的传播特性

研究黏弹性胶粘涂层/基底结构中激光激发类瑞利波的传播特性。考虑涂层及基底的黏弹性,在频域中建立环氧树脂涂层/铝基底、环氧树脂涂层/铜基底、环氧树脂涂层/泡沫基底等结构中激光激发类瑞利波的有限元数值模型,研究类瑞利波的波形及传播特性,并分析环氧树脂涂层的透明性、厚度、黏性与基底的黏性对类瑞利波传播特性的影响,在此基础上,结合理论计算的色散与衰减曲线进行验证。研究结果表明,涂层的黏性引起类瑞利波高频成分的衰减,而对低频成分没有影响;基底的黏性对类瑞利波的高频与低频成分的衰减均有影响,其中对低频成分影响较大,此外,类瑞利波的模式及频散特性与基底材料密切相关。本研究为反演黏弹性胶粘涂层/基底结构的力学参数及评估结构的粘接质量提供理论指导。     

激光激发黏弹表面波有限元数值模拟

研究黏弹性材料中激光激发的Rayleigh波的传播特征. 考虑到黏弹性材料的黏性特征,在频域内建立黏弹性材料中激光激发Rayleigh波的有限元数值模型. 在验证有限元频域数值模型正确性的基础上,模拟脉冲激光作用在黏弹性材料上激发出Rayleigh波,进而讨论激光激发的黏弹Rayleigh波的传播特征,并比较黏弹性材料与弹性材料中激光激发的Rayleigh波差异,同时分析了材料的黏性劲度参量变化对Rayleigh波特征的影响. 关键词： 表面波 激光超声 有限元方法 黏弹性     

谱有限元模拟正交各向异性黏弹性材料中导波传播特性

研究了导波在正交各向异性黏弹性复合板中传播的色散特性、波结构及功率流密度。基于二维平面运动方程,采用谱有限元方法得到了导波色散的特征方程。分析了正交各向异性黏弹性板中各向异性和黏性对能量速度和波结构的影响,以及基底对导波功率流密度的影响。数值研究结果表明:导波沿纤维方向传播的能量速度大,材料的黏性对速度影响较小,但会减小波结构的幅度;在高频时,基底的存在使两个基本模态的功率流密度分别集中到波导的上下表面,形成弱色散、高衰减及无色散、零衰减的表面波。数值模拟结果为导波用于复合材料定量无损检测和性能评价提供理论依据。      

粘弹模量对金属基底-胶粘涂层结构中类Rayleigh波传播特性的影响

为了解粘接结构中胶粘涂层的粘弹特性,进而评价粘接质量,对半无限金属基底-胶粘涂层结构涂层中的类Rayleigh波传播特性进行了研究。从粘弹的基本理论出发,通过Laplace-Henkel变换技术建立起类Rayleigh波的频率方程,将粘接涂层视为Kelvin体计算并分析了其粘弹模量对波的频散及衰减关系的影响。理论计算发现粘弹体的粘滞项对频散低阶模式影响不大,但随着粘滞的增大对高阶模式可产生影响。同时粘滞还影响各阶模式波的衰减,特别是Sezawa模式对衰减较Saw模式更为敏感,在某些结构中还会出现局部的极小值现象,结果表明:对粘涂层结构涂层中类Rayleigh波传播特性的研究可为粘弹模量的定量评估及粘接质量的评价提供一定的理论方法。     

激光激发瑞利波检测表面倾斜缺陷的研究

研究激光激发瑞利波检测样品的表面倾斜缺陷。基于频域热弹耦合方程,采用有限元方法建立激光激发瑞利波检测倾斜缺陷的数值模型,研究倾斜缺陷的检测机理。数值计算含不同的长度及倾斜角度缺陷的样品中瞬态位移波形,分析瑞利波在倾斜缺陷处模式转换的过程,研究各种瑞利波的传播路径。在此基础上,研究缺陷宽度与材料黏性对瑞利波传播及缺陷检测的影响。结果表明:瑞利波在缺陷处产生的反射及透射瑞利波的到达观测点的时间可以检测缺陷位置和长度,瑞利波在缺陷的底部发生模式转换产生的切变波可以检测缺陷倾斜角度。数值结果和已有的实验结果一致,从而为表面倾斜缺陷的检测提供有效的理论依据。      

分层半空间表面非线性瑞利波的激发*

针对非线性瑞利波在均匀分层半空间结构中的激发和传播规律进行研究。根据摄动理论和模态分解将分层半空间结构中瑞利波的二次谐波声场表示为二倍频瑞利波模式的线性组合,经由互易关系得到各模式的展开系数表达式。对不同分层半空间结构中瑞利波二次谐波的激发和传播特性进行讨论,结果表明相速度匹配的瑞利波模式其二次谐波分量随传播距离线性增长,非匹配模式的二次谐波分量则沿传播方向周期震荡传播。此外,文中定义非线性参数表征瑞利波模式产生的非线性程度,这有利于选择出具有明显非线性效应的匹配点,为后续检测工作提供理论依据,具有指导意义。     

液面位置对流-固交界面上伪瑞利波幅度影响的数值模拟

研究了流体半空间中存在气-液交界面并且其位置发生改变时,流-固交界面上伪瑞利波的传播特性和幅度响应特征。借助有限差分的方法,实现了对不同气-液交界面位置时振动方向垂直于流-固交界面的脉冲面源所激发表面波声场的数值模拟,分别讨论了气-液交界面自身的散射作用与伪瑞利波传播过程中的能量泄漏对伪瑞利波幅度的影响。数值模拟结果表明:气-液交界面自身对伪瑞利波的散射作用对伪瑞利波幅度仅有极微小的影响,而能量泄漏才是引起伪瑞利波衰减的决定性因素;随着气-液交界面位置的升高,脉冲伪瑞利波幅度呈指数规律下降,与此同时主频向低频偏移。所得研究结果可以发展为一种利用伪瑞利波幅度进行液位检测的可靠方法。      

非均匀饱含黏性流体孔隙介质中声波传播及井孔声场分析

声波在饱含流体孔隙介质中的传播特性与流体的黏滞性及孔隙介质的非均匀性密切相关.本文在Biot理论基础上,考虑了孔隙流体的剪切应力及孔隙结构的非均匀性,采用含黏性流体孔隙介质中的波动理论,研究了孔隙介质中四种体波的频散和衰减特性,分析了慢横波对快纵波转换散射的影响,进一步推导了孔隙地层井孔中的模式波及其声场的解析解,研究了非均匀孔隙介质中井孔模式波和波列的特征.研究结果表明,含黏性流体孔隙介质中存在慢横波,慢横波的频散很强,其传播特征受到介质孔隙度、渗透率及孔隙流体黏度的影响.在非均匀孔隙介质中,与慢横波相关的剪切应力平衡过程不仅导致快纵波的频散和衰减,还会影响井孔伪瑞利波及斯通利波的传播特征.本文的工作完善了孔隙介质中声波传播的物理机制,为孔隙地层井孔声波的解释与应用提供了理论指导.     

黏弹介质包裹的充液管道中低频轴对称波传播特性

研究埋地充液管道中低频轴对称波传播特性.将土壤考虑为黏弹介质,结合Kennard薄壳方程和Kelvin-Voigt线性黏弹性模型,引入土壤载荷矩阵,推导出土-管滑移情形下流体主导波和管壁压缩波的相速度表达式.通过数值模拟计算得到流体主导波和管壁压缩波的频散和衰减曲线并进行可靠性验证,分析两种波引起的管壁径向位移之比,讨...     

二维组合宽带隙材料的研究

运用FDTD(时域有限差分法)研究了弹性波/声波通过二维正方形排列的铁/水声子晶体的传播特性.发现铁/水声子晶体在高频范围存在完全带隙，软包层铁/水声子晶体在低频范围出现共振带隙，它们分别对应于不同的带隙形成机理.通过铁/水声子晶体和软包层铁/水声子晶体的组合，可以得到从高频到低频的组合宽带隙结构，从而达到在更宽频范围内控制弹性波传播的目的；而且通过调整包层的厚度、铁芯的大小、以及填充率等结构参数，可以有效地调节组合宽带隙的频率结构.     

黏弹性胶粘涂层-基底结构中激光激发类瑞利波的传播特性（英文）

The propagation characteristics of laser-generated like-Rayleigh waves in viscoelastic adhesive coating/substrate structures were studied.Considering the viscoelasticity of the coating and substrate,we have established the finite element models in frequency domain for the laser-generated like-Rayleigh waves in the epoxy coating/aluminum substrate,epoxy coating/brass substrate,and epoxy coating/foam substrate structures,respectively.In addition,we have investigated the waveform and propagation characteristics of the like-Rayleigh waves and studied the influences of the coating transparency,coating thickness,coating viscoelasticity,and substrate viscoelasticity on the propagation characteristics of the like-Rayleigh waves.Moreover,we have verified the results by the theoretical phase velocity and attenuation curves.The results show that the coating viscoelasticity induces the attenuation characteristics of the higher frequencies of the like-Rayleigh waves,but has little effect on the lower frequencies,and the substrate viscoelasticity has the influences on both the higher and lower frequencies of the like-Rayleigh waves,especially the lower frequencies.Furthermore,the mode and dispersive characteristics of the like-Rayleigh waves are closely related to the substrates.This study provides a useful theoretical basis for inverting mechanical parameters and evaluating the adhesive quality of the viscoelastic adhesive coating/substrate structures.     

Influence of adhesive layer properties on laser-generated ultrasonic waves in thin bonded plates

This paper studies quantitatively the generation of Lamb waves in thin bonded plates subjected to laser illumination, after considering the viscoelasticity of the adhesive layer. The displacements of such plates have been calculated in the frequency domain by using the finite element method, and the time domain response has been reconstructed by applying an inverse fast Fourier transform. Numerical results are presented showing the normal surface displacement for several configurations: a single aluminum plate, a three-layer bonded plate, and a two-layer plate. The characteristics of the laser-generated Lamb waves for each particular case have been investigated. In addition, the sensitivity of the transient responses to variations of material properties (elastic modulus, viscoelastic modulus, and thickness) of the adhesive layer has been studied in detail.     

Study on laser-generated Lamb waves propagation in viscoelastic and anisotropic plate

The propagation characteristics of laser-generated Lamb waves in thin composite plates are theoretically studied. Taking the anisotropic and viscoelastic properties of the composite material into account, the finite element models for simulating laser-generated Lamb waves in the composite material are established in the frequency domain. Numerical results are calculated in purely elastic and viscoelastic transversely isotropic plates, respectively. The effects of the anisotropic and viscoelastic properties on the propagation of Lamb waves are analyzed in detail. The numerical results exhibit that the features of the laser-generated Lamb wave, including attenuation, velocity, frequency, and the dispersive nature, have a close relationship with the anisotropic and viscoelastic properties of the material.     

Influence of transparent coating thickness on thermoelastic force source and laser-generated ultrasound waves

A numerical model is established to investigate the influence of transparent coating thickness on the laser-generated thermoelastic force source and ultrasound waves in the coating-substrate system by using the finite element method (FEM). Taking into account the effects of thermal diffusion, the finite width and duration of the laser source, as well as the temperature dependence of material properties, the transient temperature distributions are obtained firstly. Applying this temperature field to structure analyses as thermal loading, the thermoelastic stress field and laser-generated ultrasound wave in the specimen are obtained. The generation and propagation of the laser thermoelastically induced stress field and ultrasonic waves in coating-substrate system are presented in detail. The influence of transparent coating thickness on the transient temperature distribution, thermoelastic force source and the laser-generated ultrasound waveforms is investigated. The numerical results indicate that the thermoelastic force source and laser-generated ultrasound waveform are strongly affected by the coating thickness due to the constraint of coating. This method can provide insight into the generation and propagation of the laser-generated stress field in coating-substrate system consisting of a transparent coating and an opaque metallic substrate. It provides theoretical basics to optimize ultrasonic signal generation in particular applications and invert the physical and geometrical parameter of the coating-substrate system more accurately in the experiment.     

Analysis of Laser-generated Rayleigh wave on viscoelastic materials

In order to understand the viscoelasticity of material, this research has been conducted to study the propagation characteristics of viscoelastic Rayleigh wave theoretically. A model is presented for the pulsed laser generation of ultrasound on viscoelastic medium surface. Referred to the Kelvin model, the frequency equation and the normal displacement of viscoelastic Rayleigh wave were derived, the influence of the viscoelastic modulus on dispersion and attenuation was discussed. From the theoretical calculation, it is shown that the effect of viscoelasticity on the attenuation of Rayleigh wave is more than that on its dispersion. In the case of a weak viscosity, the attenuation of viscoelastic Rayleigh wave is directly proportional to viscosity modulus; the effect of shear viscosity on the attenuation is much more than that of bulk viscosity. The transient response of viscoelastic Rayleigh wave was also simulated using Laplace and Hankel inversion transform, which are showed in good agreement with the theoretic predictions. The model provides a useful tool for the determination of viscoelastic parameters of medium.     

Ultrasound aided smooth dispensing for high viscoelastic epoxy in microelectronic packaging

Epoxy dispensing is one of the most critical processes in microelectronic packaging. However, due its high viscoelasticity, dispensing of epoxy is extremely difficult, and a lower viscoelasticity epoxy is desired to improve the process. In this paper, a novel method is proposed to achieve a lowered viscoelastic epoxy by using ultrasound. The viscoelasticity and molecular structures of the epoxies were compared and analyzed before and after experimentation. Different factors of the ultrasonic process, including power, processing time and ultrasonic energy, were studied in this study. It is found that elasticity is more sensitive to ultrasonic processing while viscosity is little affected. Further, large power and long processing time can minimize the viscoelasticity to ideal values. Due to the reduced loss modulus and storage modulus after ultrasonic processing, smooth dispensing is demonstrated for the processed epoxy. The subsequently color temperature experiments show that ultrasonic processing will not affect LED’s lighting. It is clear that the ultrasonic processing will have good potential to aide smooth dispensing for high viscoelastic epoxy in electronic industry.     

Viscoelastic BISQ Model for Low-Permeability Sandstone with Clay

A modified BISQ （Blot/Squirt） model for wave propagation in low-permeability sandstone is developed by introducing the viscoelastic mechanism of a porous skeleton into Dvorkin＇s model. The linear viscoelasticity of the Kelvin Voigt constitutive law is employed to describe the stress-strain relation of a solid frame with clay while the ultrasonic waves propagate through the fluid-saturated sandstone. The phase velocity and attenuation of two p-waves are given based on the present BISQ model. The comparisons between numerical results and experimental data indicate that our viscoelastic model is more realistic and feasible for wave propagation in the low-permeability sandstone, especially with clay, than traditional BISQ models.