共查询到20条相似文献,搜索用时 796 毫秒
1.
基于近零折射率材料的声非对称聚焦透镜 总被引:1,自引:1,他引:0
研究基于近零折射率声子晶体的声非对称聚焦透镜。声非对称聚焦透镜的两侧分别为竖直平面与圆弧面结构,由于近零折射率材料的声波方向选择性,当声波从竖直平面一侧入射时,可以通过透镜,实现高性能声聚焦效应;而当声波从圆弧面一侧任意方向入射时,声波无法通过透镜,从而实现同时具有聚焦与非对称传输特性的声学透镜。在此基础上,改变透镜圆弧面的曲率半径,可以调控非对称透镜的正向聚焦焦点位置,且声非对称传输性能保持不变.此外,透镜内部的刚性散射体对声非对称聚焦性能的影响较小。研究结果表明所设计的声非对称聚焦透镜具有多功能、单一结构及高鲁棒性等优点,为设计新型近零折射率声学器件提供相应的理论方案与实验参考. 相似文献
2.
该文研究了利用共形变换设计声学器件的一般方法,在此基础上根据普通Mikaelian透镜的折射率分布规律,利用指数映射设计出了弧形的Mikaelian透镜,分析并讨论了弧形透镜的密度、模量和折射率分布规律。对160 k Hz的声波进行了仿真实验,仿真结果表明,在弧形透镜的理论预测焦点处出现能量汇聚的现象,即实现了弧形聚焦的效果。同时,声波在经过该透镜后传播方向产生了一定角度的偏转。该工作为实现弧形声学器件提供了理论方法,在水下声探测及水下声通讯等方面有着潜在的应用。 相似文献
3.
4.
声学超构材料作为一种新型的人工结构材料,拥有天然材料所不具备的超常物理特性,进一步拓展了材料的声学属性.同时,声学超构材料可以实现对声波精准的、可设计的操控,以及许多新颖奇特的物理现象,如声准直、声聚焦、声场隐身、声单向传输、声学超分辨成像等,具有重要的理论研究意义和应用价值.另外,拓扑材料的研究已延伸至声学领域,声学超构材料的拓扑性质成为近年的研究热点,受到人们的广泛关注.其鲁棒性边界态具有缺陷免疫、背散射抑制的特性,应用潜力巨大.本文综述了近十几年来声学超构材料的研究概况,介绍了相关的代表性工作,包括奇异等效声学参数的超构材料、声学超构表面、吸声超构材料、声学超分辨成像、宇称时间对称性声学和拓扑声学等,阐述了声学超构材料的设计理念和方法,并对其技术挑战和应用前景进行了讨论和总结. 相似文献
5.
6.
针对焊缝内相控阵声场聚焦问题,建立焊缝结构中多高斯声束法的相控阵声场计算模型,分别用直接聚焦和底面反射聚焦两种方式对焊缝内部的相控阵声场进行数值模拟,分析不同方式下的相控阵聚焦声场特性,讨论不同区域适用的聚焦方式,分析了界面倾斜角度对聚焦效果的影响。结果表明,在相同焊缝结构条件下直接聚焦的方式更适合对厚壁焊缝的中下部进行聚焦扫描,在焊缝上表面附近,当声束偏转角大于80°时,直接聚焦方式无法有效聚焦;反射聚焦的方式更适合对焊缝上表面附近区域进行聚焦扫描,随着焦点深度增加,反射聚焦的声束偏转角增大,当声束偏转角大于55°时,反射聚焦无法形成明显焦点;两种聚焦扫描方式可形成有效的互补。当设置的焦点固定时,直接聚焦的实际焦点随界面倾斜角度增大向预设点远处偏移,而反射聚焦的效果基本不受倾斜角的影响,实际焦点始终在预设焦点附近。 相似文献
7.
高能X射线聚焦组合透镜的理论研究 总被引:3,自引:2,他引:1
X射线聚焦组合透镜是一种利用折射效应对X射线辐射聚焦的新型元件。针对X射线波段的特性,综合考虑折射和吸收效应得出组合透镜的衍射屏函数,并利用衍射理论推导出X射线组合透镜的设计理论。利用统计学理论中一阶、二阶原点矩表征像面处的光学性能,使设计更简洁。该理论方法可方便地推广到双凹折射单元情况。通过数值计算分析了像向处强度分布的二阶中心矩以及焦点处辐射强度随组合透镜结构参最的变化关系,给出了一种铝基X射线组合透镜的结构参量设计结果。对于设计的组合透镜结构参量,计算了当X射线辐射能量分别为0.93 keV.9.89 keV和29.78 keV时,X射线辐射经过组合透镜后的焦点强度分布。 相似文献
8.
9.
基于折射率的弯曲波透镜多在板结构上打孔或挖槽,这种设计破坏了原有的结构,降低了板的刚度和稳定性。鉴于此,通过在板表面镶嵌棱柱的方式设计了A0模态Lamb波的聚焦透镜。首先,详细讨论了棱柱的结构参数对Lamb波带隙的影响机理,获取了波速与结构尺寸的定量关系,并实现了透镜的结构设计;其次,有限元仿真了该聚焦透镜的工作性能,包括聚焦位置、焦点处能量分布、聚焦尺寸、工作带宽等;最后,通过实验验证了该透镜设计的正确性。研究结果表明,设计的透镜能够使弯曲波聚焦在预先设定位置,且在不改变结构参数的情况下具有一定的工作频率带宽。该透镜设计方法具有聚焦性能优越、刚度强、易于加工等优点,为声聚焦透镜在无损检测、能量收集等领域的实际应用提供了参考。 相似文献
10.
11.
Thermoacoustic-reflected focusing lens based on acoustic Bessel-like beam with phase manipulation 下载免费PDF全文
《中国物理 B》2018,(12)
We report the realization of broadband reflected acoustic focusing lenses based on thermoacoustic phased arrays of Bessel-like beams, in which the units of phase manipulation are composed of three rigid insulated boundaries and a thermal insulation film in air with different temperatures. Based on these units, we realize a reflected focusing lens which can focus reflected acoustic energy on a line, and its fractional bandwidth can reach about 0.29. In addition, we discuss the influences of the base angle of Bessel-like beam, the number of basic unit, and the variation of unit temperature on focusing performances in details. Furthermore, the reflected focusing lens for the cylindrical acoustic wave based on the Bessel-like beam is also demonstrated. The proposed focusing lens has the advantages of a broad working bandwidth, large focus size,and high robustness, which may provide possibilities for the design and application of acoustic lenses. 相似文献
12.
13.
首先利用高速摄影和压力传感器测量的方法, 对曲面反射式水下强声波脉冲的传播和聚焦过程进行了实验研究.实验研究发现, 椭球面反射罩在起到汇聚声能的作用的同时也将使得强声波脉冲在传播过程中形成负压区, 并由此而引发近场声传播通道上空化气泡群的产生. 在实验结果的基础上, 进一步利用基于Kirchhoff衍射定理的声传播模型和大振幅条件下的QX气泡运动方程, 对强声波脉冲负压区的形成原因及空化气泡的运动过程进行了数值计算和分析. 研究结果表明, 在焦前区, 源于反射罩内表面的"尾波"和出口处的"边缘波"在传播过程中将形成反射波中的负压区; 在焦后区, 源于反射罩顶点的"中心波"在传播过程中将形成反射波中的负压区. 在反射波作用下, 空化气泡体现出了"正压区受压缩并振荡, 负压区膨胀"的运动特点. 在反射波之后, 空化气泡将出现成长、坍缩和回弹等典型的物理过程. 研究结果对曲面反射式水下强声波传播物理规律的认识具有实际意义. 相似文献
14.
High-efficiency unidirectional wavefront manipulation for broadband airborne sound with a planar device 下载免费PDF全文
In the past decade, one-way manipulation of sound has attracted rapidly growing attention with application potentials in a plethora of scenarios ranging from ultrasound imaging to noise control. Here we propose a design of a planar device capable of unidirectionally harnessing the transmitted wavefront for broadband airborne sound. Our mechanism is to use the broken spatial symmetry to give rise to different critical angles for plane waves incident along opposite directions. Along the positive direction, the incoming sound is allowed to pass with high efficiency and be arbitrarily molded into the desired shape while any reversed wave undergoes a total reflection. We analytically derive the working bandwidth and incident angle range, and present a practical implementation of our strategy. The performance of our proposed device is demonstrated both theoretically and numerically via distinct examples of production of broadband anomalous refraction, acoustic focusing and non-diffractive beams for forward transmitted wave while virtually blocking the reversed waves. Bearing advantages of simple design, planar profile, broad bandwidth and high efficiency, our design opens the possibility for novel one-way acoustic device and may have important impact on diverse applications in need of special control of airborne sound. 相似文献
15.
In this paper a flat structurally tunable acoustic metasurface is constructed based on the helical unit cell. The length of the acoustic channel can be tuned by the screw-in depth of the helix. Accordingly, the wave phase for the transmitted acoustic wave can be tuned and the wavefront can be manipulated. Then multifunctions such as anomalous refraction, point focusing, beam focusing and self-bending can be realized and switched just by screwing in or out the helixes. At the same time, the broadband operating frequency is also realized. The experiments for anomalous refraction and point focusing are also performed, and the results show that the designed metasurface is effective. The present studies have important applications in dynamic manipulation of acoustic waves by metasurfaces. 相似文献
16.
《中国物理 B》2016,(10)
We have proposed a two-dimensional acoustic Maxwell's fish-eye lens by using the gradient-index metamaterials with space-coiling units. By adjusting the structural parameters of the units, the refractive index can be gradually varied, which is key role to design the acoustic fish-eye lens. As predicted by ray trajectories on a virtual sphere, the proposed lens has the capability to focus the acoustic wave irradiated from a point source at the surface of the lens on the diametrically opposite side of the lens. The broadband and low loss performance is further demonstrated for the lens. The proposed acoustic fish-eye lens is expected to have the potential applications in directional acoustic coupler or coherent ultrasonic imaging. 相似文献
17.
A three-dimensional (3D) spherical acoustic cloak is designed using an acoustic layered system, which can hide an object from
the detection of acoustic wave in arbitrary direction. The cloak is constructed from multilayered concentric spherical shells
filled with homogeneous isotropic materials. Based on spherical wave expansion method, we confirm that significant low-reflection,
acoustic-shadow-reducing, and wavefront-bending effects in 3D space can be achieved by the proposed cloak. The angle distribution
of the scattered wave is further evaluated by the far-field scattering pattern. In addition, the cloak is demonstrated to
work efficiently in a wide bandwidth in which the cloaking efficiency decreases with increasing frequency. This study may
be helpful to design high-performance 3D acoustic cloaks for broadband acoustic waves in all incidence directions. 相似文献
18.
基于圆极化波入射条件下的高效同极化反射超表面实现了对圆极化反射波相位的自由调控, 设计了一维圆极化波反射聚焦超表面. 在中心频率f=16 GHz附近, 右旋圆极化平面波入射时, 反射波聚焦于焦距L=200 mm的实焦点; 左旋圆极化波入射时, 反射波近似聚焦于焦距L=-200 mm的虚焦点. 仿真计算得到聚焦波束的波束宽度、焦深. 结果表明, 这种圆极化反射聚焦超表面具有很好的聚焦效果, 同时具有长焦深和宽带特性. 相似文献
19.
We design a flat sub-wavelength lens that can focus acoustic wave. We analytically study the transmission through an acoustic grating with curled slits, which can serve as a material with tunable impedance and refractive index for acoustic waves. The effective parameters rely on the geometry of the slits and are independent of frequency. A flat acoustic focusing lens by such acoustic grating with gradient effective refractive index is designed. The focusing effect is clearly observed in simulations and well predicted by the theory. We demonstrate that despite the large impedance mismatch between the acoustic lens and the matrix, the intensity at the focal point is still high due to Fabry–Perot resonance. 相似文献
20.
We report the theoretical design and experimental demonstration of a three-dimensional(3D)omnidirectional and broadband metamaterial-based concentrator for airborne sound.The proposed mechanism uses a homogeneous anisotropic acoustic metamaterial with an ellipsoidal equifrequency contour to efficiently redirect the acoustic energy impinging on its outer surface into the central region,regardless of the incident direction.A design of the metamaterial unit cell is proposed as a practical implementation of our strategy,which is simply realized by perforating a solid spherical shell with a linearly shrinking cross section in the radial direction.We analytically and numerically prove that the non-resonant anisotropic effective acoustic parameters required for building the concentrator are produced with such a design.Good agreement is observed between the theoretical predictions and experimental measurements.An effective concentration of the incident acoustic energy is observed within a broadband that ranges 1000-1600 Hz.The experimental realization of this 3D acoustic concentrator with a simple design,low energy loss,replaceable constituent material,and omnidirectional and broadband functionality offers new possibilities for acoustic manipulations and may have important applications in a plethora of scenarios ranging from energy harvesting to noise mitigation. 相似文献