1310nm/1550nm单模光纤波分复用器的研制

报道了熔锥型1310nm/1550nm波分复用器的设计和制作方法。运用光纤耦合器的耦合机理,从理论上得出了耦合功率和拉伸长度的关系,当拉伸长度大约为9.5mm时,可以实现1310nm/1550nm波分复用。采用熔融拉锥系统,制作了样品。测试表明,器件的隔离度大于21dB,附加损耗小于0.1dB,该器件的指标都达到了实用化的要求。     

紧缩型含氟聚酰亚胺多模干涉波分复用器的FD-BPM分析

为了减小波分复用器的器件长度,在聚酰亚胺材料的基础上,设计了一种赝态结构的2×2多模干涉波分复用器,并分别用精确导模分析法对其进行模拟分析和优化设计。结果表明,赝态结构波分复用器可以有效地对980nm和1550nm光进行解复,并且器件尺寸只有传统设计的1/5。器件在器件长度和波长变动中显示出良好的容差性,并且能够和掺铒放大器与激光器实现集成。其中,赝态结构MMI聚酰亚胺波分复用器的干涉区宽度和长度以及输入口宽度和距离对其性能均有影响。     

32-channel arrayed waveguide grating multiplexer using low loss fluorinated polymer operating around 1550 nm

A 32 × 32 arrayed waveguide grating (AWG) multiplexer operating around the 1550 nm wavelength has been designed and fabricated using highly fluorinated polyethers. The propagation loss of the slab waveguide is about 0.3 dB/cm at 1550 nm wavelength. The channel spacing of the AWG multiplexer is 0.8 nm (100 GHz). The insertion loss of the multiplexer is 10.3-15.3 dB and the crosstalk is less than −20 dB.     

Integrated-Optics Multimode-Interference Wavelength Division Multiplexer for Optical Communication

An integrated-optics multimode-interference 1.3 1.55-mum wavelength division mul tiplexer demultiplexer for optical communication is reported. We have found that the device length can be reduced by adopting a restricted-resonance multimode-interference scheme and a lower beat length ratio. The former allows the device length to be 3 times shorter, and the latter has been found to be able to avoid the wavelength insensitivity of the multimode-interference effects. Modal propagation analysis was used to investigate transmission characteristics of the device. Simulation results show that a demultiplexer with contrasts of 40 dB at 1.3-mum wavelength and 34.5 dB at 1.55 mum can be achieved at an optimum coupler length of 435.5 mum. We have also discussed the fabrication and operation tolerances of the wavelength multiplexer and the effect of the wavelength-dependent refractive index.     

Multimode interference wavelength multi/demultiplexer for 1310 and 1550 nm operation based on BCB 4024-40 photodefinable polymer

A 1310 and 1550 nm coarse wavelength multi/demultiplexer based on benzocyclobutene (BCB 4024-40) polymer is demonstrated for the first time. The device is designed based on a combination of general interference and paired interference mechanisms of multimode interference (MMI). It is fabricated on BK7 glass substrate with a thin layer of SiO₂ as cover. A cost effective chemical etching technique is used in the fabrication process to take advantage of the photosensitive nature of the polymer. The device length was significantly reduced by adopting the restricted multimode interference scheme, lower beat length ratio and cascaded MMI couplers. The measured crosstalk at 1310 nm was 14.4 dB and at 1550 nm was 20.6 dB. The measured insertion loss is around 3.2-3.5 dB for both ports.     

基于夹层结构的偏振无关1×2定向耦合型解复用器的设计

提出一种基于夹层结构的偏振无关1×2定向耦合型解复用器,用于分离1310 nm和1550 nm两个波长.通过合理选择夹层结构芯区的折射率及波导间隙,可以调节同一波长两个正交偏振模的耦合长度相等,实现偏振无关;通过合理选择夹层结构波导宽度,可以使两个波长分别从不同输出波导端口输出,实现解复用功能.运用三维有限时域差分法进...     

Novel split-band erbium-doped fiber amplifier

In this paper we design a 120 nm bandwidth erbium-doped fiber amplifier using a seed light injection method for the first time. It is shown that when the wavelength of the seed light varies from 1520 to 1570 nm, the gain at 1610 nm reaches maximum near 1553 nm and increases as the seed light power. Based on the method, a novel split-band EDFA configuration is designed. The split-band architecture employs a 1550/1610 nm waveband multiplexer/demultiplexer and two independent sub-bands which pass in parallel through separate branches of the optical amplifier. The signals at independent sub-bands are combined and flattened before output, resulting in a broadband gain-flattened optical amplifier with 120 nm bandwidth.     

基于Si3N4/SiNx/Si3N4三明治结构的偏振无关1×2多模干涉型解复用器的设计

提出一种基于Si3N4/SiNx/Si3N4三明治结构多模干涉波导的偏振无关1×2解复用器,用于分离1310和1550 nm两个波长.通过合理选择三明治结构中间层SiNx的折射率,可以调节同一波长两个正交偏振态的拍长相等,实现偏振无关;根据多模干涉原理,通过合理选择多模干涉波导的长度与宽度,可以使两个波长的输出像点分别成正像和反像,实现解复用功能.运用三维有限时域差分法进行建模仿真,对结构参数进行优化,并对器件关键结构参数的制作容差进行了分析.结果表明:该器件多模干涉波导的尺寸为4.6μm×227.7μm,插入损耗低至0.18dB,输出波导间的串扰低至–25.7dB, 3dB带宽可达60 nm.另外,本文提出的器件采用Si3N4/SiO2平台,可有效减小波导尺寸,提高集成度,不仅实现了偏振无关,而且结构紧凑、损耗低,在未来的集成光路中具有潜在的应用价值.     

Characteristics of 980/1550 nm WDM coupler based on planar curved waveguides

A wavelength division multiplexer (WDM) for 980/1550 nm based on planar curved waveguide coupler (CWC) is proposed. Compared with conventional parallel straight waveguide coupler (SWC), this structure has more flexibility with two variable parameters of bending radius R and minimum edge-to-edge spacing d₀, which are the two main parameters for the splitting ratio of coupler and decrease the complexity of device design and fabrication. Based on coupled mode theory (CMT) and waveguide theory, R and d₀ of the WDM CWC are designed to be R=13.28 m and d₀=4.39 μm. The contrast ratio (CR) and insertion loss (IL) for 980 and 1550 nm are CR₁=24.62 dB, CR₂=24.56 dB and IL₁=0.014 dB, IL₂=0.015 dB, respectively. The 3D beam propagation method (BPM) is used to verify the validity of the design result. The influence of R and d₀ variations on the device performance is analyzed. For CR>20 dB, the variation ranges of R and d₀ should be within −0.10 to +0.44 m and −0.05 to +0.02 μm, respectively.     

含氟聚酰亚胺波导波长分离耦合器优化设计

提出并采用统计优化的设计方法解决含氟聚酰亚胺波导波长交叉分离耦合器的偏振态变动的影响.在实测了含氟聚酰亚胺的色散和双折射特性的基础上,优化设计了40路波长信道、1550 nm中心波长、0.8 nm波长间隔的抗偏振变动的波长交叉分离耦合器.数值模拟显示:波长周期偏移小于0.1 nm,1 dB带宽为0.5 nm,3 dB带宽为0.8 nm,串扰小于－30 dB,偏振变动导致的波长漂移小于0.08 nm.     

Technical study of visible light wavelength division multiplexing using polymer optical fiber

Visible light wavelength division multiplexing (VWDM) experiment was performed using polymer optical fiber (POF). Lights of two different wavelengths (650 and 530 nm) were sent to a single POF. Red light (650 nm) was used for 100-Mb/s full duplex IP data transmission and green light (530 nm) was used for voice signal transmission. Light sources are light-emitting diodes (LEDs). A POF coupler (splitter) and the prisms were employed as multiplexer and demultiplexer, respectively. The channel isolation and insert loss were measured, which are 20.5 and 17.65 dB for 650-nm channel respectively, and 19.16 and 20.55 dB for 530 nm one respectively.     

Analysis of reconfigurable multi-channel wavelength add drop multiplexer for intelligent optical networks

This paper presents design of an electro-optically tunable polymer multi-channel wavelength add drop multiplexer (WADM). The proposed WADM with trapezoidal waveguide geometry and poled electro-optical polymer material in the waveguide cores enables the wavelength tuning speed of WADM as 7.5 ps at the resonance wavelength of 1550 nm and coupling length of 1.5 mm. The device can be electro-optically tuned to add/drop multiple channels. Transmission spectra of the device with varying device parameters are simulated. The proposed WADM with high speed, small size and varying tuning capability makes this device, an important element in faster provisioning and routing of light paths in intelligent optical network.     

Planar microoptical multiplexer and demultiplexer for multimode optical transmission lines

A matching pair of 10-channel planar grating multiplexer/demultiplexer has been numerically analysed and fabricated. Basic construction elements are a planar slab waveguide with a cylindrical mirror facet, a standard plane blazed reflection grating and an array of input/output fibres. The arrangement has proved to work sufficiently well without special measures to reduce aberration such as inclining the input/output facet. The ray tracing method satisfactorily describes the characteristics of the devices. Measured insertion losses range from 2.2 to 7.8 dB, full 1-dB passband widths are 14 nm for the demultiplexer and 25 nm for the multiplexer.On leave from Krone AG, Berlin.     

InP基1×4多模干涉耦合器的设计与制作

在密集波分复用系统中,多波长DFB激光器阵列与多模干涉耦合器集成光源器件具有重要的应用前景.为了研制多波长集成光源中的宽带可用低损耗光耦合器,利用三维有限差分光束传播法仿真设计了一种具有强限制作用的InP/InGaAsP材料的多模干涉型耦合器.输入/输出端波导均采用楔形结构以降低多模干涉型耦合器的插入损耗,提高各个输出端口的出光平衡度.根据仿真结果,结合波导芯层为采用外延生长设备,采用反应离子刻蚀工艺制作了1×乘4多模干涉型耦合器.利用自动对准波导耦合测试系统对所制作器件的插入损耗和出光平衡度进行测量.测试结果表明,该器件在1 550 nm波长附近的40 nm带宽范围内获得了约2.6 dB的通带平坦度,在1 550 nm通信波长处,器件的插入损耗低于10 dB.     

InP基1×4多模干涉耦合器的设计与制作

在密集波分复用系统中,多波长DFB激光器阵列与多模干涉耦合器集成光源器件具有重要的应用前景.为了研制多波长集成光源中的宽带可用低损耗光耦合器,利用三维有限差分光束传播法仿真设计了一种具有强限制作用的InP/InGaAsP材料的多模干涉型耦合器.输入/输出端波导均采用楔形结构以降低多模干涉型耦合器的插入损耗,提高各个输出端口的出光平衡度.根据仿真结果,结合波导芯层为采用外延生长设备,采用反应离子刻蚀工艺制作了1×乘4多模干涉型耦合器.利用自动对准波导耦合测试系统对所制作器件的插入损耗和出光平衡度进行测量.测试结果表明,该器件在1 550nm波长附近的40nm带宽范围内获得了约2.6dB的通带平坦度,在1 550nm通信波长处,器件的插入损耗低于10dB.     

Silicon-on-insulator eight-channel optical multiplexer based on a cascade of asymmetric Mach-Zehnder interferometers

A monolithically integrated eight-channel optical multiplexer (Mux) with a 400 GHz channel spacing ~1550 nm is presented based on a silicon-on-insulator rib waveguide and an asymmetric Mach-Zehnder interferometer. All channels were optimized independently with integrated heaters. The fully tuned Mux shows an adjacent channel isolation of ~13 dB, an excess loss of ~2.6 dB, and a channel uniformity of ~1.5 dB over a 25 nm wavelength span. In addition, the phase tuning efficiency for different interlevel dielectric layer thicknesses and thermal crosstalk were investigated.     

Simultaneous Compensation of Dispersion and Losses using Er-Doped Double-Core Optical Fiber

The Er-doped double-core dispersion compensating fiber (EDDCF) has been fabricated using modified chemical vapor deposition (MCVD) technique. We have obtained 14 dB gain at 1550 nm (using a diode laser of 980 nm wavelength which provides 100 mW of pump power) with dispersion of about −165 ps/km nm. It is useful for the optical fiber network where amplification as well as negative dispersion is necessary. We are the first to report the experimental realization and characterization of the EDDCF.     

Photonic bus with loop signal routing and multichannel wavelength selection on a single silicon-on-insulator platform

We have demonstrated a silicon-on-insulator-based photonic bus with integrated splitters, a demultiplexer, attenuators, and a multiplexer for loop signal routing and multichannel optical wavelength selection. The integrated photonic bus has demonstrated a 33+ dB optical cross talk, a 32+ dB extinction ratio, and a rise time of 7.6 micros with two-stage Mach-Zehnder attenuators.     

Experimental realization of a novel dispersion- compensating optical fiber amplifier for simultaneous compensation of positive dispersion and losses

Erbium-doped dispersion-compensating optical fiber (EDCF) has been theoretically simulated and experimentally fabricated using Modified Chemical Vapor Deposition (MCVD) for optimum operation at 5.0km. It is optimized for both gain as well as negative dispersion. The erbium has been doped into the cladding region while the core of the optical fiber is chosen to be narrow so as to have a high negative dispersion. Measured gain of 3.1 dB at 200 m using 100 mW pumping power (980 nm wavelength) at 1550 nm has been obtained and the gain of 32 dB at 5.0 km using same pumping scheme has been predicted. The chromatic dispersion of this EDCF has been also measured to be –43.5 ps/km-nm at 1550 nm and thus, providing the dispersion of –217.5 ps/nm at 5 km. The bend-induced losses are found to be negligible. We are the first to report the experimental realization of EDCF.     

Characteristic Analysis of a Smooth Square Microring Resonant Wavelength Multiplexer

Novel formulas of amplitude coupling ratio and transmission functions are presented for a smooth square microring resonant (MRR) wavelength multiplexer. By using these formulas, transmission characteristics are analyzed and some parameters are optimized for such a 1 × 8 polymeric device around the central wavelength of 1550.92 nm with the wavelength spacing of 1.6 nm. In the design of the device, by using the smooth squares, a thicker coupling layer is obtained, and by resonating the light at different resonant orders in different filter elements, the ring radius increment is increased sufficiently, which is of benefit to the fabrication of the device. When the amplitude coupling ratio is 0.2, the 3-dB bandwidth of the spectral response is about 0.2 nm; the ratio between -1 dB and -10 dB bandwidths is about 0.2; the insertion loss is less than 1.33 dB; and the crosstalk is below -21 dB for every vertical output channel of the device.