聚乙烯醇/聚乙烯吡咯烷酮碱性复合膜的制备及其性能

通过在不同浓度KOH溶液中进行掺杂,制备出了聚乙烯醇/聚乙烯吡咯烷酮(PVA/PVP)碱性聚合物电解质膜.详尽考察了膜的组成、微观结构、热稳定性、离子电导率和甲醇吸收率.结果表明,PVA与PVP两者具有较好的相容性,当m(PVA)∶m(PVP)=1∶0.5时,膜断面致密、均匀,未发生大尺度相分离.PVP的混入可以极大提高复合膜的电导率和热稳定性.当m(PVA)∶m(PVP)=1∶1时,复合膜的电导率可达2.01×10-3 S.cm-1.PVA/PVP/KOH膜的甲醇吸收率随温度的升高没有明显变化,100℃时其甲醇吸收率仅为同条件下Nafion 115膜的1/4.这表明该复合膜有望作为一种新型的碱性直接甲醇燃料电池用固体电解质膜且可提高膜的使用温度.     

Conductivity of lithium perfluorononanoate in water-poly(vinyl pyrrolidone) solutions

Conductivity measurements, focused on the counterion binding of lithium perfluorononanoate (LiPFN) micelles in pure water and in the presence of poly(vinyl pyrrolidone) (PVP), have been carried out. An abrupt decrease of the conductance of the LiPFN in pure water, due to the self aggregation of anions and to dynamic linkage of cations on the micellar surface, has been found. Analysis of the conductometric data indicates that about 50% of the stoichiometric concentration of Li⁺ interacts with the head groups of the perfluorinated anions involved in micellar assembly. Conductometric data of LiPFN-water-PVP systems reveals a favorable influence of the PVP on the micellization process modulated by the concentration and by the molecular weight of the polymer. Analysis of these data shows that in presence of PVP the degree of binding of lithium ion to the micellar assemblies linked to the polymer is smaller than in pure water. By increasing the amount of surfactant in solution up to the concentration where the polymer becomes saturated by LiPFN micelles, the binding of lithium ion in the system becomes slightly greater than that observed in LiPFN-water system. This finding can be interpreted in terms of additional binding of lithium ion to the polymer chains. Conductivity measurements carried out on LiClO₄ and KClO₄ in water + PVP support this interpretation.     

Poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide)-g-poly(vinyl pyrrolidone): synthesis and characterization

Pluronic poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers are grafted with poly(vinyl pyrrolidone) by free radical polymerization of vinyl pyrrolidone with simultaneous chain transfer to the Pluronic in dioxane. This modified polymer has both thermal responsiveness and remarkable capacity to interact with a wide variety of hydrophilic and hydrophobic pharmaceutical agents which is very attractive for medical applications. The chemical structure of the graft copolymers was characterized by FTIR and 1H NMR spectroscopy. Polymerization conditions such as initiators, feed ratio, and reaction times are studied to obtain the ideal graft copolymer.     

Molecular Mobility in a Poly(ethylene glycol)–Poly(vinyl pyrrolidone) Blends: Study by the Pulsed Gradient NMR Techniques

The molecular mobility in PEG–PVP blends as a function of the time of system storage and the PVP molecular mass is studied by the pulsed-field gradient NMR method. The distribution of PEG molecules over their mobilities is found in a blend containing 36 vol % of PEG with the molecular mass of 400 g/mol. As the storage time of the system increases, the spectrum of diffusion coefficient values varies, thereby indicating the redistribution of PEG400 molecules in the blend with PVP. An anomalous (partly restricted) diffusion of PEG400 molecules is discovered, reflecting the influence of PVP macromolecules on the motion of short PEG chains. It is shown that, during the redistribution of PEG molecules in the blend, they are involved in a complex with PVP, which is characterized by its own transport properties. The data obtained by the NMR relaxation technique are in agreement with the results of NMR diffusion measurements in the studied systems.     

Miscibility Studies of Dextran/Poly(vinyl pyrrolidone) Blend in Solution

The miscibility of dextran (Dex)/poly(vinyl pyrrolidone) (PVP) in solution has been investigated in different percentages of the blend components by employing viscosity, density, refractive index and ultrasonic velocity methods at 30 and 50°C, respectively. Ultrasonic velocity and adiabatic compressibility against blend compositions were plotted and found to be linear. The interaction parameters μ and α have been obtained by using the viscosity data. The results indicated that the Dex/PVP blends are miscible in the entire composition range and it was further confirmed by ultrasonic velocity, density, refractive index studies. In addition, the results revealed that the change in temperature has no significant effect on the miscibility of Dex/PVP polymer blend.     

Effect of temperature on the intrinsic viscosity of poly(ethylene glycol)/poly(vinyl pyrrolidone) blends in aqueous solutions

In this work the intrinsic viscosity of poly(ethylene glycol)/poly(vinyl pyrrolidone) blends in aqueous solutions were measured at 283.1–313.1 K. The expansion factor of polymer chain was calculated by use of the intrinsic viscosities data. The thermodynamic parameters of polymer solution (the entropy of dilution parameter, the heat of dilution parameter, theta temperature, polymer–solvent interaction parameter and second osmotic virial coefficient) were evaluated by temperature dependence of polymer chain expansion factor. The obtained thermodynamic parameters indicate that quality of water was decreased for solutions of poly(ethylene oxide), poly(vinyl pyrrolidone) and poly(ethylene oxide)/poly(vinyl pyrrolidone) blends by increasing temperature. Compatibility of poly(ethylene oxide)/poly(vinyl pyrrolidone) blends were explained in terms of difference between experimental and ideal intrinsic viscosity and solvent–polymer interaction parameter. The results indicate that the poly(ethylene glycol)/poly(vinyl pyrrolidone) blends were incompatible.     

模板法制备定向排列的聚乙烯吡咯烷酮纳米管簇

近年来,随着纳米科学的迅猛发展,对定向生长的纳米碳管、半导体、氧化物及金属纳米线、管等无机材料的制备引起人们广泛的关注．然而对定向生长的聚合物纳米结构材料如聚合物的纳米管、线等的制备,却未见报道．最近,德国马普微结构研究所通过模板法制得了具有取向一致的聚合物纳米结构材料,该材料在化学传感器、药物输送以及微环境研究等方面具有广泛的应用前景．     

Conductance and relaxations in the glassy and rubber states of aqueous poly( vinyl pyrrolidone): A cryofixation medium

The dielectric permittivity and loss of poly(vinyl pyrrolidone), molecular weight 40,000, containing 40% (by weight) water have been measured over the temperature range 77–325 K and frequency range 12 Hz to 0.1 MHz. A prominent relaxation due to rotational diffusion of water molecules in a hydrogen-bonded structure occurs at T < T_g (237 K). The half-width of the dipolar relaxation spectra is 2.27 decades and is temperature independent, which is strikingly different from the corresponding features of pure polymers. It is concluded that H-bonded amorphous solid water persists in the glassy polymer matrix and that the H-bonded structure contains the pyrrolidone side groups of the randomly oriented chain. The relaxation peak at T near T_g is masked by a large dc conductivity which, when expressed in terms of electric modulus, has a spectrum of half-width 1.37 instead of 1.14 decades expected for dc conductivity alone. The contribution from dipolar reorientation in the glass-rubber range of the PVP-H₂O solution is smaller than that in its sub-T_g relaxation.     

Thermodynamic Study of Poly(vinyl pyrrolidone) in Water/Dimethyl Sulfoxide Solutions by Viscometry

In this work, the intrinsic viscosities of poly(vinyl pyrrolidone) with a molar mass of 58?kg?mol^?1 were measured in water?Cdimethyl sulfoxide solutions at temperatures from (298.15 to 318.15)?K. The expansion factors of the polymer chains were calculated from the intrinsic viscosity data. The thermodynamic parameters (entropy of dilution parameter, the heat of dilution parameter, theta temperature, polymer?Csolvent interaction parameter and second osmotic virial coefficient) were derived by the temperature dependence of the polymer chain expansion factor. The thermodynamic parameters indicate that mixtures of water/dimethyl sulfoxide become poorer solvents for poly(vinyl pyrrolidone) as the temperature is increased. Also, the thermodynamic parameters indicate that water/dimethyl sulfoxide mixtures become better solvents for poly(vinyl pyrrolidone) by increasing the volume fractions of dimethyl sulfoxide.     

用作工人玻璃体的聚乙烯基吡咯烷酮水凝胶的流变性

合成了交联的聚乙烷基吡咯烷酮水凝胶,考察了凝胶在注射前和经ＷＮ１２号针（直径１．１８ｍｍ）注射后的粘弹性。注射前,所有试样表现出交联网络的特征,即Ｇ′〉Ｇ″且对ω的斜率接近零,并且随交联剂用量降低,储存模量和回弹性减小。注射后,部分试样模量急剧减小;未加交联剂的试样粘弹性保持不变,仅有样品Ｂ８注射后网络结构破坏较小,粘弹性变化很小且保持了注射前良好的回弹性,比其他各样品更适宜用作工人玻璃体。     

High-performances membranes for pervaporation I. Poly(vinyl alcohol)–poly(N-vinyl pyrrolidone) blends

Dense membranes were prepared from poly(vinyl alcohol)–poly(N-vinyl pyrrolidone) (PVA–PVP) blends of different compositions and studied in swelling and dehydration by pervaporation of three organic solvents contaminated by 5 wt% water. The swelling generally increases with the PVP content. No extraction occurs in water–tetrahydrofuran (THF) and water–methyl ethyl ketone (MEK) mixtures. In ethanol containing 10 wt% of water, there is no extraction for blends containing less than 40 wt% PVP and an increasing extraction beyond this PVP content. The pervaporation flux of the water–ethanol mixture increases drastically at the same threshold whereas the water permselectivity falls to a low level. The values of the diffusion and permeability coefficients determined from transient permeation of the test water–ethanol mixture exhibit a similar sudden increase at the same PVP content threshold. This singular behavior of the blend membranes is interpreted by a strong affinity of the PVP component to ethanol, combined with a disappearance of crystallites in the blend at this threshold. Consequently the amorphous membrane can swell freely according to the affinity of the PVP component, leading to the observed behavior.     

Poly(N-isopropylacrylamide-co-N-t-butylacrylamide)-block-poly(ethylene glycol)-block-poly(N-isopropylacrylamide-co-N-t-butylacrylamide) triblock copolymers: synthesis and thermogelation properties of aqueous solutions

Novel triblock copolymers with PEG middle blocks of 1–10 kDa and poly(N-isopropylacrylamide-co-t-butylacrylamide) statistical copolymer side arms with DP_n?≈?88 and different compositions, were synthesized by SET-LRP. The thermogelation properties of their aqueous solutions depended on both hydrophobic monomer content of the side blocks and molecular weight (MW) of the poly(ethylene glycol) (PEG) middle block, as proven by dynamic rheometry, DSC, and tube inversion method measurements. At constant PEG chain length, increasing TBAM proportions led to a gelation process occurring at progressively lower temperatures, as well as to a lower stability of the forming hydrogels in the case of shorter-PEG-chain block copolymers. By employing longer PEG blocks (M_PEG ≥6,000 Da), stable hydrogels with the gelation temperature below 37 °C could be obtained. For a constant composition of the copolyacrylamide blocks, the dependence of the phase transition temperature (T_ph) on M_PEG displayed a different shape at different polymer solution concentrations, because of the stronger variation of T_ph with polymer concentration as M_PEG increased. Also, the viscoelastic properties of the hydrogels resulting from 20 wt.% polymer aqueous solutions at 37 °C were stronger affected by the MW of the PEG middle block than by the hydrophobic character of the thermosensitive side blocks.     

Study of the Interactions between Poly(vinyl pyrrolidone) and Sodium Dodecyl Sulfate by Fluorescence Correlation Spectroscopy

Polymer–surfactant interactions are operative in a variety of industrial processes and important consumer products. Fluorescence correlation spectroscopy is a powerful method for investigating the complex formation and was used to study the well-known reference system involving the aggregation of sodium dodecyl sulfate (█) and poly(vinyl pyrrolidone) (█) in the presence of a fluorescence-marked sodium decylsulfate probe (█, see picture). C_T=surfactant concentration, d_fl=hydrodynamic size of the probe.     

Dielectric relaxations of ionic thiol-coated noble metal nanoparticles in aqueous solutions: electrical characterization of the interface

The radiowave dielectric properties of organothiol monolayer-protected Au and Ag metallic nanoparticles have been investigated in the frequency range of 10 kHz to 2 GHz, where a dielectric relaxation, due to the polarization of the ionic atmosphere at the aqueous interface, occurs. The simultaneous measurement of the particle size, by means of dynamic light scattering technique, and of the particle electrical charge, by means of laser microelectrophoresis technique, allow us to describe the whole dielectric behavior at the light of the standard electrokinetic model for charged colloidal particles. Au and Ag metallic nanoparticles experience a large charge renormalization, in agreement with the counterion condensation effect for charged spherical colloidal particles. The value of the effective valence Z(eff) of each nanoparticle investigated has been evaluated thanks to the dielectric parameters of the observed relaxation process and further confirmed by direct current electrical conductivity measurements. All in all, these results provide support for the characterization of the electrical interfacial properties of metallic nanoparticles by means of dielectric relaxation measurements.     

PVB存在下PVC化学法脱氯化氢的研究

ＰＶＢ存在下ＰＶＣ化学法脱氯化氢的研究刘恒＊李大成陈朝珍（四川联合大学化工学院成都６１００６５）关键词聚氯乙烯，脱氯化氢，聚乙烯醇缩丁醛１９９６－０９－０８收稿，１９９７－０５－２６修回国家教育委员会留学归国人员资助费资助课题近年来在ＰＶＣ脱氯化氢制...     

Poly(methyl methacrylate)‐block‐poly(N‐vinyl pyrrolidone) diblock copolymer: A facile synthesis via sequential radical polymerization mediated by isopropylxanthic disulfide and its nanostructuring polybenzoxazine thermosets

In this contribution, we reported a facile synthesis of poly(methyl methacrylate)‐block‐poly(N‐vinyl pyrrolidone) (PMMA‐b‐PVPy) diblock copolymers via sequential radical polymerizations mediated by isopropylxanthic disulfide (DIP). It was found that the radical polymerization of N‐vinyl pyrrolidone (NVP) mediated by DIP was in a controlled and living manner. In contrast, the polymerization of methyl methacrylate mediated by DIP displayed the behavior of telomerization, affording xanthate‐terminated PMMA with a good control of molecular weights while the conversion of monomer was not very high. The xanthate‐terminated PMMA can be successfully used as the macromolecular chain transfer agent for the polymerization of NVP via RAFT/MADIX process and thus PMMA‐b‐PVPy diblock copolymers can be successfully synthesized via sequential radical polymerization mediated by isopropylxanthic disulfide. One of these diblock copolymers was incorporated into polybenzoxazine and the nanostructured thermosets were obtained as evidenced by transmission electron microscopy, small angle X‐ray scattering, and dynamic mechanical thermal analysis. The formation of nanostructures in polybenzoxazine thermosets was ascribed to a reaction‐induced microphase separation mechanism. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 952–962     

Mechanistic study of the synthesis of Au nanotadpoles, nanokites, and microplates by reducing aqueous HAuCl4 with poly(vinyl pyrrolidone)

This article describes a simple approach to anisotropic Au nanostructures with various shapes by reducing HAuCl 4 with poly(vinyl pyrrolidone) (PVP) in aqueous solutions without the use of any additional capping agent or reductant. In this approach, the commercially available PVP servers as a mild reducing agent thanks to its hydroxyl (-OH) end groups, enabling kinetic control over both nucleation and growth. As the volume of HAuCl 4 solution added to the reaction was increased, the morphology of Au nanostructures evolved from nanotadpoles to nanokites and then triangular and hexagonal microplates. The slow reduction rate associated with the mild reducing power of PVP plays a critical role in forming nanoplates during nucleation as well as their growth into highly anisotropic nanostructures. Electron microscopy studies reveal that the nanotadpoles and nanokites are formed through the linear fusion of small Au particles (<10 nm) to the initially formed nanoplates, whereas the microplates result from the continuous addition of Au atoms to the side faces of nanoplates. Through this morphological control, the localized surface plasmon resonance peaks of these Au nanostructures can be tuned in the visible and near-IR regions.     

Radiation induced crosslinking of poly(vinyl methylether) in aqueous solutions

Radiation induced crosslinking of poly(vinyl methylether) (PVME) has been investigated in aqueous solutions. The spectral and kinetic features of the transients involved in the crosslinking reaction have been studied by pulse radiolysis of dilute PVME solutions. H atoms reacts with PVME, like OH radicals, by abstracting an H atom predominantly from β-position with respect to ---OCH₃ group, but the rate of reaction of H atom is an order of magnitude slower than that of OH reaction. The PVME radicals formed by H attack have been found to decay by usual 2nd-order kinetics unlike PVME radicals produced by OH attack that are reported to decay by a complex time-dependent kinetics that deviates strongly from 2nd-order kinetics. The rate constant of e⁻_aq with PVME at pH 5.5 has been found to be 1.2×10⁸ dm³ mol⁻¹ s⁻¹. From the decay behaviour of the transient species formed by reaction of e⁻_aq with PVME, it has been shown that the transient initially reacts with solvent protons by a fast reaction to yield radical species which subsequently recombine by a slow mode. The dependence of gelation dose and radiation yields of crosslinking (Gx) of PVME on various factors such as polymer concentration, dose rate, pH, presence of oxygen and crosslinking agent has also been studied by steady-state radiolysis using an electron-beam accelerator.     

Interaction of collagen and poly(vinyl pyrrolidone) in blends

The interaction between collagen and poly(vinyl pyrrolidone) (PVP) in blends has been studied by viscometry, differential scanning calorimetry (DSC) and by Fourier transform infrared spectroscopy (FTIR). It was found that the amide A and amide I bands position in FTIR spectra of collagen were shifted after blending with PVP to higher wavenumbers. DSC measurements showed different melting temperature, glass transition temperature and enthalpy for the blends and for the single components. Viscosity measurements showed interaction between collagen and PVP also in a dilute water solution.The results have shown, that the interactions between collagen and PVP exist due to the strong interactions between the synthetic and biological component, mainly by hydrogen bonds. These interactions caused that collagen and PVP are miscible at molecular level. The blending of collagen with PVP may give the possibility of producing new materials for potential biomedical applications.     

Poly(DEAEMa-co-PEGMa): a new pH-responsive comb copolymer stabilizer for emulsions and dispersions

Stimulus responsive copolymers are an important class of surfactants that are attracting growing attention in the literature. When used to stabilize colloids, they confer responsiveness to an otherwise nonresponsive system. In this work, a new pH-responsive comb copolymer surfactant, poly(DEAEMa-co-PEGMa), where DEAEMa and PEGMa are diethylaminoethyl methacrylate and poly(ethylene glycol) methacrylate, is introduced and used to stabilize emulsions and particulate dispersions. The copolymer contained 70 mol % of DEAEMa. Turbidity versus pH measurements and photon correlation spectroscopy of the copolymer solutions revealed pH-triggered collapse of the chains above the pK(a). The surface activity of the copolymer increased with pH. The minimum surface tension measured was 33.6 mN/m at pH = 10. These data enabled identification of the pK(a) for poly(DEAEMa-co-PEGMa) as 6.8. The emulsions consisted of tetradecane-in-water and had a droplet size in the range 5-11 mum. They were slightly flocculated when the pH value was close to the isoelectric point. The emulsions phase separated at low pH values. The particulate dispersions were based on carbendazim, which is a fungacide, and had an average size of 1.8 mum. The data for the emulsions and carbendazim dispersions show that the extent of flocculation decreases with decreasing size of the dispersed phase. Analysis of the data suggest that optimum emulsion stability occurs in the pH region of 5.3-6.8 as judged by turbidity measurements. Electrophoretic mobility measurements as a function of pH for the emulsions and carbendazim dispersions reveal a similar isoelectric point in the range of 8.5-9.0, which is about two pH units higher than the pK(a) of the copolymer. A mechanism that explains the pH-responsive stability of the emulsions and dispersions is presented and discussed.