On variational formulations with rigid-body constraints for finite elasticity: Applications to 2D and 3D finite element simulations

We investigate a recently proposed variational principle with rigid-body constraints and present an extension of its implementation in three dimensional finite elasticity problems. Through numerical examples, we illustrate that the proposed variational principle with rigid-body constraints is applicable to both single field and mixed finite elements of arbitrary order and geometry, e.g. triangular/tetrahedral and quadrilateral/hexagonal elements, in two and three dimensions. Moreover, we demonstrate that, as compared to the commonly adopted approach of discretizing the rigid domains with standard finite elements, the proposed formulation requires neither discretization nor numerical integration in the interior of each rigid domain. As a comparative result, the variational formulation may reduce the total number of degrees of freedom of the resulting finite element system and provide improved accuracy.     

Sound Radiated in a Cavity by a Vibrating Plate: Comparison between the Results of a Finite Element Method (FEMAK) and a Boundary Element Method (NoVAlea2D)

The coupling between a cavity and a vibrating plate is written as a strong coupling where both the continuity of stresses and particle velocities at the interface are taken into account. A FEM analysis reveals an important coupling between the first mode of the plate and the cavity. The pressure distribution in the cavity shows a strong quarter of a wave length pattern indicating the influence of the first Dirichlet mode in the cavity. The vibrating plate is then excited by a turbulent flow modelled by its spectral density using the Corcos model. A comparison is made between the results obtained from a FEM and a BEM formulation. Good agreements are observed concerning the plate displacements. The comparison of the cavity sound pressure levels is less good. This revised version was published online in July 2006 with corrections to the Cover Date.     

On strain and damage interactions during tearing: 3D in situ measurements and simulations for a ductile alloy (AA2139-T3)

Strain and damage interactions during tearing of a ductile Al-alloy with high work hardening are assessed in situ and in 3D combining two recently developed experimental techniques, namely, synchrotron laminography and digital volume correlation. Digital volume correlation consists of registering 3D laminography images. Via simultaneous assessments of 3D strain and damage at a distance of 1-mm ahead of a notch root of a thin Compact Tension-like specimen, it is found that parallel crossing slant strained bands are active from the beginning of loading in a region where the crack will be slanted. These bands have an intermittent activity but are stable in space. Even at late stages of deformation strained bands can stop their activity highlighting the importance of plasticity on the failure process rather than damage softening. One void is followed over the loading history and seen to grow and orient along the slant strained band at very late stages of deformation. Void growth and strain are quantified. Gurson–Tvergaard–Needleman-type simulations using damage nucleation for shear, which is based on the Lode parameter, are performed and capture slant fracture but not the initial strain fields and in particular the experimentally found slant bands. The band formation and strain distribution inside and outside the bands are discussed further using plane strain simulations accounting for plastic material heterogeneity in soft zones.