Direct multielement determination of trace elements in boron carbide powders by direct current arc atomic emission spectrometry using a CCD spectrometer

The use of direct current arc atomic emission spectrometry (DC-arc-AES) with a CCD spectrometer for the direct determination of the trace impurities Al, Ca, Cr, Cu, Fe, Mg, Mn, Na, Ni, Si, Ti, and Zr in three well characterized boron carbide powders is described. The detection limits obtained by the procedure were found to be between 0.2 (Mg) and 25 (Na) ??g?g^?1 for the above elements. Three boron carbide powder samples with trace element concentrations between 0.9 (Cu) and 934 (Si) ??g?g^?1 for Al, Ca, Cr, Cu, Fe, Mg, Mn, Na, Ni, Si, Ti, and Zr ?? including the standard reference material ERM?-ED102 ?? were analyzed by DC-arc-AES. The relative standard deviations for 9 measurements when using 5.0?±?0.3?mg of the respective samples were found to vary from 6.2 to 27% for Al and Cu, respectively. The trace elements Al, Ca, Cr, Cu, Fe, Mn, Ni, Si, Ti and Zr could be determined in the standard reference material and their concentrations determined by DC-arc AES were found to be between 89 and 116% of the accepted values. Fe and Ti were determined by DC-arc AES in the three boron carbide samples as well as in Al₂O₃, BN, SiC, coal fly ash, graphite and obsidian rock. The correlation coefficients of the plots of the net intensities versus the accepted values over the concentration ranges from 18 to 1750 and from 6 to 8000???g?g^?1 are 0.999 and 0.990 for Fe and Ti, respectively.

Separation of metallic impurities from uranium by anion exchange on Dowex 1×8 resin

The separation of metallic impurities from uranium by anion exchange with a Dowex 1×8 resin has been investigated. The following elements can be quantitatively separated from 400 mg uranium using a 1 cm diameter 15 or 30 cm long column. The elements Ag, Al, Ba, Ca, Cr, Cs, K, Mg, Mn, Na, Ni, Rb, REE, Sc, Th, Ti and Y can be separated by eluting the elements with conc. HCl. Uranium is retained by the resin. Al, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Na, REE and V can be separated by eluting with 0.01 N H₂SO₄. Uranium is retained by the resin. Cd and Zn can be separated by first eluting uranium with 0.5 N HCl and then eluting Cd and Zn with 1 N NH₃. Hf, Zr and V can be separated by eluting with 5 N HCl but some uranium contamination is unavoidable.     

Micro-homogeneity studies of boron carbide powders

We have studied the micro-homogeneity of boron carbide powders by inductively coupled plasma optical emission spectrometry (ICP-OES) and total reflection X-ray fluorescence spectrometry (TXRF) using slurry sampling. To get information on the particle size distributions of the powders, the stabilized slurries of boron carbide powders were nebulized, the aerosols were transported into a Batelle impactor and the droplets were collected on the impactor stages bearing TXRF sample holders. In a first series of measurements, parameters of the impaction like the duration of the impaction and the use of glutinous substance on the sample holders were optimized. The different mass size fractions for industrial boron carbide powders were determined by weight measurements of the fractions collected on the different stages. The established particle size distributions were in the range of 0.5 to >16 μm and found similar to those determined by laser diffraction reported elsewhere. Analyses of the mass fractions by slurry sampling TXRF showed that Ca, Ti, Cr, Mn, Fe, Ni and Cu within the measurements errors were homogeneously distributed over the mass fractions between 0.5 and 4 μm and that their concentrations agreed with the bulk composition, as determined with ICP-OES subsequent to digestion. However, light underestimates were found at the 5 (Mn) up to 150 μg g^?1 (Fe) level. Finally, boron carbide powders were washed out with nitric acid with different concentrations and leaching solutions and the residues were analyzed by ICP-OES and TXRF respectively. It is shown that up to 60% of the residual trace impurities in the powder studied can be removed by leaching with 34% (v/v) of nitric acid.

Multi-element analysis of urine by inductively coupled plasma orthogonal acceleration time-of-flight mass spectrometry

This work shows the analytical potential of inductively coupled plasma orthogonal-acceleration time-of-flight mass spectrometry (ICP-OA-TOF-MS) for rapid, simultaneous, and reliable determination of more than 50 elements at ultra-trace levels in urine. Under optimum instrumental conditions, after a 10-fold sample dilution step, and by using Rh as an internal standard, ICP-OA-TOF-MS also enables the determination of elements whose assay is more diffcult when using conventional quadrupole instruments. This is confirmed by the analysis of commercially available reference urine samples and/or by analytical recoveries study and isotope ratio based determination of accuracies. On the other side, the interference resulting from polyatomic carbon, chlorine, or various sulfur species does not allow the determination of elements such as Cr, Fe, V, Se and As without a mathematical correction.

Multi elemental neutron activation analysis of popular medicinal plants used to prevent blood lipid disorders

In this study, five of popularly used medicinal plants as Cichorium intybus, Anethum graveolens seed, Thymus vulgaris, Fumaria officinalis and Hibiscus sabdariffa Syn: Hibiscus gossypifolius were prepared from Herbal Pharmacies in Tehran. The amounts of Al, Br, Ca, Cl, Cr, Fe, K, Mg, Mn, Na, V and Zn in samples were determined using instrumental neutron activation analysis. In this method, Tehran research reactor as a neutron source and relative INAA have been used as the analysis procedure. Highest levels of Cr (5 mg/kg), Ca (28316 mg/kg) and Mg (4134 mg/kg) were detected in Thymus vulgaris and F1umaria officinalis, respectively.     

白族长寿地区硬果仁中19种元素的测定分析

用电感耦合等离子体发射光谱法（ICP－AES）,对云南省白族长寿区的葵花子仁、麻子仁和核桃仁中的Ca、Mg、P、S、Na、AI、B、Fe、Zn、Cu、Mo、Sr、Mn、Cr、Se、Ge、Cd、Pb、As等19种元素进行了测定分析。结果表明,3种硬果仁中含有丰富的人体必需的Ca、Mg、P、S、Na、Fe、Zn、Mn、Se、Cu、Cr、Sr、Mo等有益元素,且P、Mg、S、Ca、Na、Zn、Mn、Fe、Se的含量较高。这些生命元素在3种硬果仁中的含量存在差异。有害元素Cd、Pb均未检出,核桃仁中As含量较高。硬果仁中富含这些生命元素是该地区老人健康长寿的一个重要原因。     

Atomic emission spectrographic determination of trace elements in environmental objects using a two-jet argon arc plasmatron

The effect of the main components (K, Na, Ca, Mg, Fe) on the atomic and ionic emission of trace elements Sr, Lu, V, Sc, Ti, Cr, Pb, Sn, Ni, Co, Bi, Mn, Pd, Zn, Be, Ba, Zr, Y, and La in atomic emission spectrometry with a two-jet argon arc plasmatron was studied to improve the accuracy of the quantitative multielement analysis of natural objects. It was shown that all of the studied macro elements to a certain extent enhance the analytical signal. The maximum enhancement was 2.5-fold. The effect of the matrix composition of the material is not strong and can easily be controlled by properly selecting the operational conditions of the formation of a plasma jet and bufferation, and also samples and reference elements. It was shown that a wide spectrum of trace elements can be quantitatively determined in various rocks, soils, and plant ashes with a relative standard deviation of 6–15% and detection limit of n × 10^?4 to n × 10^?6% using unified reference samples prepared synthetically.     

Study of hair element content from an urban Bulgarian population using NAA assessment of environmental status

In this preliminary study, scalp hair samples from 36 individuals resident in Sofia, Bulgaria, were analysed and Ag, Al, As, Au, Ba, Br, Ca, Cd, Ce, Cl, Co, Cr, Cs, Cu, F, Fe, Hg, I, K, La, Mg, Mn, Mo, Na, Ni, Rb, S, Sb, Sc, Se, Sn, Sr, Ti, V, W, and Zn were determined. Instrumental neutron activation analysis (INAA) methods were used. Three washing procedures.: distilled-deionised water; acidacetone-water; and Triton X-100 detergent-water, showed a variable elemental change strongly dependent on the procedure used. More than 18 elements (Al, As, Ba, Ca, Ce, Cl, Co, Cs, F, Fe, I, K, La, Mo, Na, Ni, Sb, Sc, Sr and V) were easily removed by water-washing. Triton X-100 detergent was more effective in removing Ag, As, Au, Cl, Cs, K, Na and Rb; but not Hg. Only S and Zn were strongly incorporated in the hair structure (less than 10% being removable by any washing technique). There is no significant age correlation with any element between the various hair treatment groups. Elevated cadmium levels were found in the hair of smokers (0.711–4.913 g/g Cd) compared with nonsmokers (0.568–2.681 g/g Cd). Comparison of the elemental data for distilled water-washed hair and studies from Oxford, England and Hastings, and Hastings, New Zealand (using the same INAA method) revealed interesting variations dependent on local industrial and nutritional factors.     

Extraction-chromatographic system TBP-HBr in radiochemical neutron activation analysis of high-purity materials

The extraction and extraction-chromatographic behaviour of a variety of elements in the TBP-HBr system with concentrations from 0.1 to 7M HBr has been studied. The results allowed the development of simple procedures for radiochemical neutron activation determination of 22 impurity elements (Na, K, Sc, Cr, Mn, Fe, Co, Ni, Cu, Ga, As, Se, Rb, Sr, Zn, Mo, Ag, Sb, Te, Ba, La, Hf and W) in high-purity cadmium and indium samples with detection limits from 1 g g^–1 for Fe and Zr to 0.01 ng g^–1 for Na, Sc, Mn with relative standard deviations < 0.15. To increase the selectivity of the extraction-chromatographic separation, use was made of extraction suppression and co-extraction effects. The procedure for the extraction-chromatographic separation of scandium from a number of other elements is described as an example. The procedure can be used for simultaneous quantitative separation of impurity radionuclides from radiation produced long-life scandium radionuclides in the neutron activation analysis of titanium and vanadium.     

Trace elements in Variegated Bolete (Suillus variegatus) fungi

Metallic elements such as Ag, Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Rb, Sr, and Zn were determined using ICP-OES in a representative set of fifteen fruiting bodies of the edible fungus Suillus variegatus. Fruiting bodies were collected from unpolluted areas near the village of Lubichowo of the Bory Tucholskie forest complex in northern Poland in 2007?C2008. The caps were richer in Ag, Al, Cd, Cr, Cu, Fe, K,Mg, Ni, Rb, and Zn, and the stipes in Ba, Ca, Mn, Na, Pb, and Sr. Cobalt concentration in the caps and stipes was similar. In the caps, the content of the elements decreased in the order (mg per kg of dry weight): K 29000 ± 3700, Fe 1600 ± 80, Mg 990 ± 110, Rb 320 ± 86, Zn 90 ± 19, Ca 75 ± 34, Al 68 ± 32, Na 40 ± 18, Cu 19 ± 7, Mn 13 ± 7, Cd 1.0 ± 0.5, Ni 0.64 ± 0.32, Ag 0.40 ± 0.20, Cr 0.33 ± 0.06, Pb 0.20 ± 0.17, Ba 0.19 ± 0.11, Sr 0.15 ± 0.09, and Co 0.070 ± 0.050. Apparently, S. variegatus collected from background areas are relatively low in Pb and Cd and so are suitable for human consumption.     

Heavy element stable isotope ratios : analytical approaches and applications

Continuous developments in inorganic mass spectrometry techniques, including a combination of an inductively coupled plasma ion source and a magnetic sector-based mass spectrometer equipped with a multiple-collector array, have revolutionized the precision of isotope ratio measurements, and applications of inorganic mass spectrometry for biochemistry, geochemistry, and marine chemistry are beginning to appear on the horizon. Series of pioneering studies have revealed that natural stable isotope fractionations of many elements heavier than S (e.g., Fe, Cu, Zn, Sr, Ce, Nd, Mo, Cd, W, Tl, and U) are common on Earth, and it had been widely recognized that most physicochemical reactions or biochemical processes induce mass-dependent isotope fractionation. The variations in isotope ratios of the heavy elements can provide new insights into past and present biochemical and geochemical processes. To achieve this, the analytical community is actively solving problems such as spectral interference, mass discrimination drift, chemical separation and purification, and reduction of the contamination of analytes. This article describes data calibration and standardization protocols to allow interlaboratory comparisons or to maintain traceability of data, and basic principles of isotope fractionation in nature, together with high-selectivity and high-yield chemical separation and purification techniques for stable isotope studies.

Feasibility of using INAA for biomonitoring of heavy metals and other elements in human ectoderm derivatives

For systematic checking of the feasibility of determining elements by INAA in scalp hair, pubic hair and toenails, three different regimes were employed by varying the activation time and cooling time prior to -ray spectrometric measurements. The combination of these three regimes (activation time 1 min, cooling time 10 min; activation time 5 h, cooling time 5 d; activation time 5 h, cooling time 30 d) made it possible to determine the following 20 elements in most samples: Al, As, Br, Ca, Ce, Cl, Co, Cr, Cu, Fe, Hg, I, K, La, Mn, Na, S, Sb, Se, Zn. Further 10 elements (Ba, Cd, Mo, Ni, Rb, Sc, Sm, Th, V, W) were detectable only in some samples, however, with a fairly good precision, so that they could be detected in this way in the case of elevated concentrations exceeding physiological limits.     

Biosensor for aluminium(III) based on its inhibition of α-chymotrypsin immobilized on a screen-printed carbon electrode modified with gold nanoparticles

We report on an amperometric assay for Al(III) ions that is based on the inhibition of the enzyme α-chymotrypsin. Screen-printed carbon electrodes modified with gold nanoparticles were used as solid supports for the immobilization of the enzyme. The amperometric response of the synthetic enzyme substrate substrate N-benzoyl-L-tyrosine ethyl ester is affected by Al(III) ions, and this leads to a decrease in the amperometric oxidation current. The assay has a detection limit of 3.3?μM of Al(III). The repeatability and reproducibility of the method are 6.9% (n?=?3) and 6.4% (n?=?5), respectively. Main interferents include Mo(VI), W(VI) and Fe(III) ions. The method was successfully applied to the determination of Al(III) in tap water.

INAA of IAEA-331 (spinach), SRM,for 40 elements

Forty elements in IAEA-331 (Spinach), an intercomparison material, have been determined using NAA. Among them, 30 elements, Ag, Al, Ba, Br, Ca, Ce, Cl, Co, Cr, Cs, Eu, Fe, Hf, K, La, Mg, Mn, Na, Ni, Rb, Re, Sc, Se, Sr, Ta, Tb, Th, V, Zn and Zr were determined by INAA. A series of simple and quantitative radiochemical separation procedures were established for the determination of ten additional elements. Cd, Lu, Mo, Sb, Sm, Yb, U were determined by removing the major interfering nuclide⁸²Br. Cu was determined by 0.048M NaDDTC/CHCl₃ extraction from 1M HCl medium. As and P were determined using an inorganic exchange column of acid aluminium oxide (AAO). Integral counts from 80 keV to 130 keV contributed by Bremsstrahlung from³²P -were used to evaluate the content of phosphorus.     

Internal standard method utilized for 14 MeV neutron induced characteristic X-ray emission analysis

The instrumental neutron activation analysis technique (INAA) was used for homogeneity tests and certification analyses of the coal fly ash reference material ECO prepared at the Institute of Radioecology and Applied Nuclear Techniques (IRANT), Koice, Czechoslovakia. The relative standard deviations due to inhomogeneity were found to be <3% for 19 elements including for sample weights about 50 mg. The results of determination of the elements Al, As, Ba, Ca, Ce, Co, Cr, Cs, Dy, Eu, Fe, Ga, Hf, In, K, La, Mn, Mo, Na, Nd, Ni, Rb, Sb, Sc, Sm, Sr, Ta, Th, Ti, U, V, W, and Zn, were compared with the IRANT certified or information values. Inference was made on the reliability of the IRANT specified values for the element contents.     

Atomic absorption determination of traces of elements in ammonium perrhenate of high purity

Summary Methods for the determination of traces of As, Bi, Ca, Cd, Co, Cu, Cr, Fe, In, K, Mg, Mn, Mo, Na, Ni, Pb, Se, Si, Sb, Sn, Te, Tl, V and Zn in ammonium perrhenate of 99.99% –99.999% purity grade are proposed. Na, K, Ca, Mg and Si are determined directly in the aqueous sample solution, while the remaining elements, except Mo, are determined after preliminary extractive separation of their dithiocarbamate complexes at two different pH-values (8-9 and 5–6). Mo is separated from the matrix by extraction with -benzoinoxime. The analaysis is carried out by FAAS or ETAAS, depending on the concentration of the corresponding trace elements. The recovery factor is checked for impurity amounts of 1 g/ml and 0.2 g/ml, respectively.

---

AAS-Bestimmung von Elementspuren in hochreinem Ammoniumperrhenat

---

Dedicated to Prof. Dr. G. Tölg on the occasion of his 60th birthday     

Application of scanning electron microscopy and X-ray microanalysis: FE-SEM, ESEM-EDS, and EDS mapping for studying the characteristics of topographical microstructure and elemental mapping of human cardiac calcified deposition

To explore the pathogenic mineral formation in a huge cardiolith isolated from the left heart atrium of an 80-year-old male patient, field emission scanning electron microscopy (FE-SEM) was used to analyze the topographic microstructure and perform elemental mapping in a cross-section of the cardiac calcified deposit after dissection. Environmental SEM equipped with an energy dispersive X-ray spectrometer (EDS) was also used to investigate the composition and spatial distribution of elements in the cross-section, and fiberoptic Raman spectroscopy was used to reidentify the chemical composition of designated positions. The results indicated that calcium hydroxyapatite and cholesterol were the main components of the cardiac calculus. The plate-like structures of calcium hydroxyapatite were unevenly spread over the cholesterol of the cardiac calculus. The calcium hydroxyapatite-rich area exhibited higher amounts of C, O, P, and Ca elements as well as trace amounts of N, Na, Mg, and Al, whereas the major concentration of C, minor concentrations of N and O, and trace amounts of P and Ca were observed in the cholesterol-rich area. Hypercholesterolemia associated with calcification of this cardiac calculus was proposed. Both FE-SEM and ESEM energy dispersive X-ray microanalyses were performed directly, for the first time, to provide useful information on the microstructural characteristics and spatial distribution of elements on the surface of human cardiac calculi.

Biological and chemical investigation of Allium cepa L. response to selenium inorganic compounds

The aim of this study was to evaluate the biological and chemical response of Allium cepa L. exposed to inorganic selenium compounds. Besides the investigation of the total content of selenium as well as its chemical speciation, the Allium test was used to evaluate the growth of onion roots and mitotic activity in the roots’ meristem. The total content of selenium was determined by inductively coupled plasma mass spectrometry (ICP MS). High-performance liquid chromatography (HPLC), coupled to ICP MS, was used for the selenium chemical speciation. Results indicated that A. cepa plants are able to biotransform inorganic selenium compounds into their organic derivatives, e.g., Se-methylselenocysteine from the Se(IV) inorganic precursor. Although the differences in the biotransformation of selenium are due mainly to the oxidation state of selenium, the experiment has also shown a fine effect of counter ions (H⁺, Na⁺, NH₄ ⁺) on the response of plants and on the specific metabolism of selenium.