Synergistic effect of dicarbollide anions in liquid-liquid extraction: a molecular dynamics study at the octanol-water interface

We report a molecular dynamics study of chlorinated cobalt bis(dicarbollide) anions [(B(9)C(2)H(8)Cl(3))(2)Co](-)"CCD(-)" in octanol and at the octanol-water interface, with the main aim to understand why these hydrophobic species act as strong synergists in assisted liquid-liquid cation extraction. Neat octanol is quite heterogeneous and is found to display dual solvation properties, allowing to well solubilize CCD(-), Cs(+) salts in the form of diluted pairs or oligomers, without displaying aggregation. At the aqueous interface, octanol behaves as an amphiphile, forming either monolayers or bilayers, depending on the initial state and confinement conditions. In biphasic octanol-water systems, CCD(-) anions are found to mainly partition to the organic phase, thus attracting Cs(+) or even more hydrophilic counterions like Eu(3+) into that phase. The remaining CCD(-) anions adsorb at the interface, but are less surface active than at the chloroform interface. Finally, we compare the interfacial behavior of the Eu(BTP)(3)(3+) complex in the absence and in the presence of CCD(-) anions and extractant molecules. It is found that when the CCD(-)'s are concentrated enough, the complex is extracted to the octanol phase. Otherwise, it is trapped at the interface, attracted by water. These results are compared to those obtained with chloroform as organic phase and discussed in the context of synergistic effect of CCD(-) in liquid-liquid extraction, pointing to the importance of dual solvation properties of octanol and of the hydrophobic character of CCD(-) for synergistic extraction of cations.     

Synergistic extraction of Eu(III) and Nd(III) from aqueous medium using a mixture of sulfasalazine and 1,10-phenanthroline

Journal of Radioanalytical and Nuclear Chemistry - Solvent extraction of Eu(III) and Nd(III) from aqueous medium was investigated by sulfasalazine in benzoyl alcohol as single extractant and then...     

γ-Induced reduction of Eu(III) in aqueous solution

-radiation of Co⁶⁰ has been applied to reduce Eu(III) to Eu(II) in aqueous solutions of the mixture of rare earths. The kinetics of the process has been investigated as a function of the absorbed radiation dose and organic additive concentration.

---

+3 - Co⁶⁰: Eu(III)Eu(II). .

     

Lanthanide luminescent displacement assays: the sensing of phosphate anions using Eu(III)-cyclen-conjugated gold nanoparticles in aqueous solution

1.Eu, a cyclen based Eu(III)-thiol conjugate, was incorporated onto the surface of water-soluble gold nanoparticles to give AuNP-1.Eu. The self-assembly between AuNP-1.Eu and the antenna 2 resulted in the formation of the highly luminescent lanthanide system, AuNP-1.Eu-2, at pH 7.4. The sensing of flavin monophosphate 3 is demonstrated, whereby 3 displaced the antenna 2 in AuNP-1.Eu-2, resulting in the formation of AuNP-1.Eu-3 and quenching of the Eu(III) emission.     

Synergistic solvent extraction of Eu(III) and Tb(III) with mixtures of various organophosphorus extractants

Synergistic solvent extraction of Eu(III) and Tb(III) from thiocyanate solutions with mixtures of 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (EHPNA) and di-2-ethylhexylphosphoric acid (DEHPA) or tributyl phosphate (TBP) or trioctylphosphine oxide (TOPO) or triphenylphosphine oxide (TPhPO) in benzene has been studied. The mechanism of extraction can be explained by a simple chemically based model presented in this paper. The equilibrium constants of the mixed-ligand species of the various neutral donors have been determined by non-linear regression analysis.     

The distribution of cerium (III) cations between aqueous and nitrobenzene phases in the presence of dicarbolide anions

Extraction of micro- and macroquantities of Ce³⁺ (C°_Ce = 10^6??10^?1 mole/dm³) with a nitrobenzene solution of dicarbolide (C°_H⁺B^? = 0.04?0.5 mole/dm³) from a nitric acid solution (C°_HNO3 = 0.1?0.3 mole/dm³) was investigated. Coextraction of water and simultaneous extraction of Ce³⁺ and Ba²⁺ ($\text{C}$_Ce⁺ + C_Ba = 0.3 mole/dm³) from 0.3 and 0.5 M HNO₃ was also studied. It was found that the reaction Ce³⁺ + 3H?Ce?³⁺ + 3H (K_Ce/3H) takes place in all cases. The dependence of the apparent exchange extraction constant K_Ce/3H on the initial composition of both phases was determined and the effect of the composition of the aqueous phase on the values of K_Ce/3H and K_Ba/2H was discussed. The stability constant of the CeNO²⁺₃ complex and the hydration number of the Ce³⁺ cation in the organic phase (h³⁺_Ce = 16.2 ± 2) was determined and a linear correlation between individual extraction constants of mono-, bi- and trivalent cations and the hydration numbers in the nitrobenzene phase was found using data from the present paper and values given in literature.     

Molecular dynamics simulations of sorption of organic compounds at the clay mineral/aqueous solution interface

The adsorption of trichloroethene, C₂HCl₃, on clay mineral surfaces in the presence of water has been modeled as an example describing a general program that uses molecular dynamics simulations to study the sorption of organic materials at the clay mineral/aqueous solution interface. Surfaces of the clay minerals kaolinite and pyrophyllite were hydrated at different water levels corresponding to partial and complete monolayers of water. In agreement with experimental trends, water was found to outcompete C₂HCl₃ for clay surface sites. The simulations suggest that at least three distinct mechanisms coexist for C₂HCl₃ on clay minerals in the environment. The most stable interaction of C₂HCl₃ with clay surfaces is by full molecular contact, coplanar with the basal surface. This kind of interaction is suppressed by increasing water loads. A second less stable and more reversible interaction involves adsorption through single-atom contact between one Cl atom and the surface. In a third mechanism, adsorbed C₂HCl₃ never contacts the clay directly but sorbs onto the first water layer. To test the efficacy of existing force field parameters of organic compounds in solid state simulations, molecular dynamics simulations of several representative organic crystals were also performed and compared with the experimental crystal structures. These investigations show that, in general, in condensed-phase studies, parameter evaluations are realistic only when thermal motion effects are included in the simulations. For chlorohydrocarbons in particular, further explorations are needed of atomic point charge assignments. © 1998 John Wiley & Sons, Inc. J Comput Chem 19: 144–153, 1998     

Adsorption of Eu(III) from aqueous solution using mesoporous molecular sieve

The adsorption behavior of Eu(III) from aqueous solution to mesoporous molecular sieves (Al-MCM-41) is investigated as a function of contact time, solid content, ionic strength, pH, foreign ions and temperature by using batch technique. The experimental results show that Eu(III) adsorption is strongly dependent on pH values, but independent of ionic strength and foreign cations under our experimental conditions. The kinetic process is described by a pseudo-second-order rate model very well. The adsorption isotherms are simulated by Langmuir model very well. The thermodynamic parameters (∆G°, ∆S°, ∆H°) are calculated from the temperature dependent adsorption isotherms at 293, 313 and 333 K, respectively, and the results suggest that the adsorption of Eu(III) on Al-MCM-41 is a spontaneous and endothermic process. Desorption studies indicate that the adsorbed Eu(III) is very difficult to be desorbed from the solid surface. Al-MCM-41 is a suitable material for the preconcentration and solidification of Eu(III) from large volumes of aqueous solutions.     

The reductions of chloro-, bromo- and iodopentacyanocobaltate(III) anions by titanium(III) in aqueous acidic solution

Summary The reduction of chloro-, bromo- and iodopentacyanocobaltate(III) anions by aquatitanium(III) has been studied in aqueous solution with ionic strength, I = 1.0 mol dm^-3 (LiCl, KBr or KI) at T = 25 °C. The dependence of the observed second-order rate constant, k _obs, on [H⁺] has been investigated over the acid range 0.005–0.100 mol dm ^–3 and is of the general limiting form: k _obs k ₀ + k[H ⁺] ^–1, where k ₀ is appreciable in all cases and k is a composite rate constant. Using values of K _a (associated with the Ti^III hydrolytic equilibrium constant), obtained from the kinetic data for the Ti^III/Co^III redox reactions, and comparison of the rate constants obtained with those for the corresponding V^II reductions of the same Co^III complexes, it is concluded that the Ti^III reductions of these halopentacyanocobaltate(III) complexes proceed via an outer-sphere mechanism.Author to whom all correspondence should be directed, who is presently on leave of absence from Obafemi Awolowo University.     

Voltammetric study of the transfer of fluoride ion at the nitrobenzene / water interface assisted by tetraphenylantimony.

The transfer of F- ion assisted by an organometallic complex cation tetraphenylantimony (TPhSb+) across the polarized nitrobenzene / water (NB / W) interface has been studied by means of ion-transfer voltammetry. A well-defined voltammetric wave was observed within the potential window at the NB / W interface when tetraphenylantimony tetrakis(4-chlorophenyl) borate and F- ion were present in NB and W, respectively. The voltammogram can be interpreted as being due to the reversible transfer of F- ion assisted by the formation of the TPhSbF complex through the coordination of F- to Sb atom in NB. The formal formation constant of TPhSbF in NB has been determined to be 10(1.95 +/- 0.2 M(-1). No voltammetric wave due to the TPhSb(+)-assisted transfer of other anions such as Cl-, Br, I-, NO3-, CH3COO- and H2PO4(-) ions has been observed within the potential window.     

Sorption of Cu(II) and Eu(III) ions from aqueous solution by olive cake

The sorption of Cu(II) on olive cake, a biomass by-product of olive oil production, has been investigated by potentiometry at pH 6, I=0.1 M NaClO₄, 25 °C and under atmospheric conditions. Numerical analysis of the experimental data supports the formation of surface complexes and allows the evaluation of the corresponding formation constant, which is found to amount log β=5.1±0.4. This value is close to corresponding values given in literature for Cu(II)-humate complexes, indicating that the same type of active sites (e.g. carboxylic and phenolic groups) is responsible for the Cu(II) binding by olive cake. Addition of a competing metal ion (e.g. Eu(III) ion) in the system leads to replacement of the Cu(II) by Eu(III). Evaluation of the potentiometric data obtained from competition experiments indicates on a ionexchange mechanism. The formation constant of the Eu(III) species sorbed on olive cake is found to be log β=5.4±0.9. The results of this study are of particular interest with respect to waste water treatment technologies using biomass products as adsorbent material and environmental impact assessments regarding disposal of biomass by products in the geosphere.     

Synergistic effect of tris(4-isopropyltropolonato)cobalt(III) on the extraction of lanthanoid(III) with 2-thenoyltrifluoroacetone.

Synergistic enhancement of the extraction of lanthanoid(III) (Ln) with 2-thenoyltrifluoroacetone (Htta) in benzene has been found by the addition of tris(4-isopropyltropolonato)cobalt(III) (Co(ipt)3). The synergistic effect of Co(ipt)3 was ascribed to the formation of a 1:1 adduct of Ln(tta)3 with Co(ipt)3, i.e., a binuclear complex, in the organic phase. The adduct formation constant (beta s,1) determined by the extraction equilibrium analysis was reasonably consistent with that determined by spectrophotometry. The beta s,1 values decreased with increase in the atomic number of Ln and showed a large difference between light and heavy Ln. Spectroscopic studies were performed to explain the difference in the beta s,1 values. Electronic absorption spectra showed that the change in the structure of Co(ipt)3 complexed with the light Ln chelate is larger than that with the heavy Ln. The IR spectra showed the displacement of the coordinated water molecules of the light Ln chelates with Co(ipt)3. On the other hand, the adduct formation of heavy Ln was caused by the hydrogen bonding between Co(ipt)3 and the coordinated water of the Ln chelate.     

Synergistic solvent extraction of Eu, Sr and Cs into chlorobenzene solutions of the three conformers of tetrathiocalixarene and dicarbollide

Solvent extraction of several long-lived fission products from diluted nitric acid in pronounced synergistic systems involving dicarbollide and conformers of a specific thiacalix[n]arene were investigated using mainly chlorobenzene as the diluent. The following factors were experimentally investigated: molar ratio of the two extractants, total extractants concentration, aqueous acidity, nature of the mineral acid used, relative phase volumes, repeated extractions and metal concentration. Data are given on the rather slow kinetics of extraction and stripping, limited chemical stability of the extractants, selectivity and interference of foreign metals. The three different conformers of the basic compound with identical chemical composition exhibit very differing extraction properties. The plots of distribution ratios of all metals tested versus the varying concentration of one extractant keeping the concentration of the other extractant constant invariably exhibit maxima, interpreted as the result of an existence of several extracted species in the extract. Suggestions are given concerning possible practical applications of two of the conformers studied.     

Synergistic extraction of Ce(III), Eu(III) and Tm(III) with a mixture of picrolonic acid and benzo-15-crown-5 in chloroform

Summary The synergistic mixture comprising picrolonic acid (HPA) and benzo-15-crown-5 (B15C5) in chloroform has been used for the extraction of Ce(III), Eu(III) and Tm(III) as representatives of lanthanide(III) ions from pH 1-2 solutions having ionic strength of 0.1 mol^. dm^-3(K⁺/H⁺, Cl^-). The composition of the extracted species has been determined as M(PA)₃^. nB15C5 where M is Ce, Eu and Tm and n=1 or 2. The influence of various anions and cations on the extraction of these ions has also been studied and only oxalate, cyanide and tartrate have some deleterious effect. The extraction equilibrium constants have been evaluated and discussed.     

Interactions of La(III) with anions in aqueous solutions. A139La NMR study

The interactions of the La(III) cations with three anions (X), nitrate, chloride and perchlorate, in aqueous solutions in the pH range 4.0–6.5, were studied by¹³⁹La NMR spectroscopy. A single model, involving the formation of the contact ion-pair (inner-sphere complex) (LaX)²⁺ was successfully and quantitatively applied to the chemical shift and the transverse relaxation rate data. Both measurements gave values for the thermodynamic equilibrium constants of formation of (LaX)²⁺ (K _th ) in good agreement (average K _th =0.45±0.05; 0.15±0.09; 0.03±0.01, respectively for nitrate, chloride and perchlorate). The complexes are characterized by chemical shifts of –25, 22 and –3.1 ppm and by transverse relaxation rates of 11.2, 5 and 1.65 kHz respectively for nitrate, chloride and perchlorate. The¹³⁹La quadrupolar relaxation rate is not controlled by the reorientational correlation time. This finding is discussed, and it is suggested that the very fast exchange of water molecules in the first coordination sphere of La(III) is responsible for the time fluctuation of the electric field gradient at the¹³⁹La nucleus site.     

Polarographic study of Eu(III)-succinate-ethylenediamine and Eu(III)-malonate-ethylenediamine mixed systems

The mixed complexes of Eu(III) with succinate (succ^2?) and malonate (mal^2?) and ethylenediamine (en) have been studied polarographically at 25°C and at constant ionic strength, μ = 0.1 (NaNO₃) and pH 6. The reduction of the complexes in each case is quasi-reversible and diffusion-controlled. In each system three mixed complexes are formed, viz. [Eu(succ)(en)]⁺, [Eu(succ)(en)2]⁺ and [Eu(succ)₂(en)]^? with stability constants log β₁₁ = 9.2, log β₁₂ = 17.5 and log β₂₁ = 11.7; and [Eu(mal)(en)]⁺, [Eu(mal)₂(en)₂]^? and [Eu(mal)₃(en)]^3? with stability constants log β₁₁ = 11.4, log β₂₂ = 19.08 and log β₃₁ = 13.5 respectively.     

Density-functional theory study of Iron(III) hydrolysis in aqueous solution

Fe(III) hydrolysis in aqueous solution has been investigated using density-functional methods (DFT). All possible structures arising from different tautomers and multiplicities have been calculated. The solvation energy has been estimated using the UAHF-PCM method. The hydrolysis free energies have been estimated and compared with the available experimental data. The different hydrolysis species have distinct geometries and electronic structures. We have shown that improvement of theory level in calculating the electronic energy does not necessarily improve the estimated free energies in aqueous solution since the UAHF-PCM is a simple method that neglects specific interactions with the solvent. Therefore, it is important to have the correct balance between theory level used in the electronic calculation and the UAHF-PCM. The PBE/TZVP/UAHF-PCM method has been found to describe correctly the hydrolysis energies of Fe(III), deviating about 3.0 kcal mol(-1) from experimental values.     

Thermodynamic study on the complexation of Am(III) and Eu(III) with tetradentate nitrogen ligands: a probe of complex species and reactions in aqueous solution

A thermodynamic investigation has been performed to study the complexation of trivalent metal (M) ions (M = Am(III), Eu(III)) with tetradentate ligands (L), 6,6'-bis(5,6-dialkyl-1,2,4-triazin-3-yl)-2,2'-bipyridines (BTBPs), by using relativistic quantum mechanical calculations. The structures and stabilities of the inner-sphere BTBPs complexes were explored in the presence of various counterions such as NO(3)(-), Cl(-), and ClO(4)(-). According to our calculations, Am(III) and Eu(III) can chelate eight or nine water molecules at most, whereas more stable species like M(NO(3))(3)(H(2)O)(4) tend to be formed in the presence of nitrate ions. The inner sphere of the BTBPs complexes can accommodate four water molecules or three nitrate ions based on our calculations, forming species such as [ML(H(2)O)(4)](3+) and ML(NO(3))(3). Compared with Eu(III) complexes, the Am(III) counterparts have obviously lower binding energies in both the gas phase and solution. In addition, the solvent effect significantly decreases the binding energies of the BTBPs complexes. It has been found that the complexing reactions, in which products and reactants possess the same or close number of nitrate ions, are more favorable for formation of the BTBPs complexes. In short, the reactions of M(NO(3))(3)(H(2)O)(4) → ML(NO(3))(3) and [M(NO(3))(H(2)O)(7)](2+) → [ML(2)(NO(3))](2+) are probably the dominant ones in the Am(III)/Eu(III) separation process.     

Preorganization of diglycolamides on the calix[4]arene platform and its effect on the extraction of Am(III)/Eu(III)

Different diglycolamide (DGA)-substituted calix[4]arene-based extractants were synthesized and evaluated for the extraction of Am(III) and Eu(III), representative trivalent actinide and lanthanide ions, respectively. On the narrow rim of the calix[4]arene platform, the DGA moiety was either 1,3-di- or tetrasubstituted with a varying spacer length between the oxygen and amide nitrogen atom. In addition, DGA groups were appended both to the wide rim and to both rims of calix[4]arenes and their efficiencies were compared for Am(III) and Eu(III) extraction at three different feed acidities. The extraction and separation efficiencies strongly depended on the N-alkyl substituent as well as the spacer length. 1,3-Di-DGA-substituted calix[4]arenes are inferior extractants to the corresponding tetra-DGA-substituted ones. Narrow rim DGA-functionalized derivatives resulted in high extraction efficiencies, while the wide rim DGA-functionalized calix[4]arenes showed practically no extraction.     

Quantum efficiency of the luminescence of Eu(III), Tb(III) and Dy(III) in aqueous solutions

Summary The luminescence quantum efficiency of Eu(III), Tb(III) and Dy(III) in chloride solutions as well as complexed by aminopolyacetic acids was determined. An interpretation of the observed dependences in the system investigated has been proposed.

---

Die Lumineszenz-Quantenausbeute von Eu(III), Tb(III) und Dy(III) in wäßrigen Lösungen

Zusammenfassung Die Lumineszenz-Quantenausbeute von Eu(III), Tb(III) und Dy(III) in Chloridlösung und in Komplexen mit Aminopolyessigsäuren wurde bestimmt. Eine Interpretation der beobachteten Abhängigkeiten im untersuchten System wurde vorgeschlagen.