聚双(6-咔唑基己氧基)磷腈的合成

以PCl5和NH4Cl为原料采用"一步法"合成了线型聚二氯磷腈(4);4与6-咔唑基己醇发生亲核取代反应合成了聚双(6-咔唑基己氧基)磷腈(5),其结构经1H NMR,31P NMR,IR和GPC表征。热分析结果表明,5具有良好的热稳定性和较高的玻璃化温度。     

一种含有咔唑功能基团的有机聚磷腈的合成与表征

采用传统的亲核取代反应的方法合成了一种新有含有咔唑侧基的有机磷腈高分子，并用红外、＾１Ｈ核磁、紫外、热失重、差热分析了其结构，它的玻璃化转变温度为９１．６℃，大大低于聚乙烯咔唑的玻璃化转变温度。     

聚对苯基苯酚取代磷腈的合成与表征

环状三聚六氯化磷腈在α-氯代萘中开环聚合得到聚氯化磷腈.后者与对苯基苯酚钠反应合成了标题聚合物.测定了该聚合物的IR、~1H NMR谱.GPC估计其数均分子量为6×10~4.扭辫分析表明,该聚合物的玻璃化转变温度与粘流温度分别为0℃和130℃,硫化温度为210℃.     

聚酚氧磷腈的合成及其热分解过程

聚酚氧磷腈的合成及其热分解过程胡源１桂宙１藤本康弘２范维澄１田村昌三３（１中国科学技术大学合肥２３００２６；２日本劳动省产业安全研究所；３日本东京大学）聚磷腈是一类骨架由磷和氮原子交替排列的无机高分子化合物。由于磷原子上有两个可取代的基团，赋予了它可...     

β－萘酚取代聚磷腈的合成与表征

β－萘酚取代聚磷腈的合成与表征徐师兵，郑福安，杨永刚（华东理工大学高分子材料所，上海，２００２３７）（吉林大学理论化学研究所）关键词聚氯化磷腈，Ｎ－二氯磷酰Ｐ－三氯单磷腈，β－萘酚取代聚磷腈无机高分子聚氯化磷腈中的氯原子具有很高的反应活性，它可与许多...     

含咔唑基团的有机聚磷腈的合成与表征

含咔唑基团的有机聚磷腈的合成与表征;咔唑;聚磷腈;亲核取代     

β-萘酚取代聚磷腈的合成与表征

The method of preparing N-dichlorophosphoryl-P-trichloromonophosphazene as monomer from PCl5 and(NH4)2 SO4 in 1, 1, 2, 2-tetrachloroethane was investigated. Polydichlorophosphazene can be obtained from the polycondensation of this monomer and poly (β-naphthyloxy) phosphazen (I) was prepared from polydichlorophosphazene and sodium β-naphthyloxy.At the same time, the IR, 31P NMRof the title polymers were determined.The glass transition and viscous flow temperatures determined by TBAare-83℃ and 19℃respectively. Decomposition temperature measured by TGis 338℃.The Mn of Iestimated by VPOis 4110.     

聚[二(对丙酸钠苯氧基)]磷腈合成方法的改进

本文以THF为反应溶剂制备聚[二(对丙酸钠苯氧基)]磷腈,降低了实验成本,提高的反应产率,并对制备的聚合物进行了IR,31PNMR、1HNMR表征,及TGA,GPC分析。     

可生物降解聚[(对羟基苯甲酸甲酯/甘氨酸乙酯)膦腈]的合成及其体外降解

以PCl5和NH4Cl为原料,利用一锅法制备了聚二氯膦腈,通过两步亲核取代反应,分别以甘氨酸乙酯和对羟基苯甲酸甲酯为亲核试剂,合成了混合取代可生物降解聚[(对羟基苯甲酸甲酯/甘氨酸乙酯)膦腈].用核磁共振波谱及红外光谱等对产物结构进行了表征.研究了甘氨酸乙酯和对羟基苯甲酸甲酯的比例及外界环境对所制备的聚膦腈降解性能的影响,并进行了体外降解实验.研究结果表明,通过改变甘氨酸乙酯和对羟基苯甲酸甲酯的比例,可获得一种降解速率可调节的生物降解膦腈聚合物.     

一种新星型大分子——六对甲酰胺乙酸甲酯苯氧基环三磷腈的合成及其热性能、水解性能的表征

本文以六氯环三磷腈（HCCP）为原料合成了一种以甘氨酸甲酯苯氧基为侧基的新星型环三磷腈化合物六对甲酰胺乙酸甲酯苯氧基环三磷腈（HGPCP）及其中间体,并采用^1H NMR,^13CNMR,^31PNMR,FFIR和元素分析技术对其结构进行了确认．通过TGA、DSC、FrIR技术和测定水解液的紫外光谱,水解残余物剩余质量,残余物的磷含量方法分别对化合物的热性能和水解性能进行了表征．通过比较HGPCP在酸碱环境下的水解结果,发现水解504h,样品的水解过程尚处于化合物侧链断裂阶段,其37℃在酸性缓冲溶液（pH1．0）下较中性缓冲溶液（pH1．0）更易水解．由于其可能在高温下生成交联结构,六对醛基苯氧基环三磷腈（HCPCP）,六对羧基苯氧基环三磷腈（HCPCP）和HGPCP在800℃时碳残余量分别为75％、47％和47％,都表现出良好的热稳定性．     

Poly[bis(2,2,2-trifluoroethoxy)phosphazene] superhydrophobic nanofibers

Nanofibers of poly[bis(2,2,2-trifluoroethoxy)phosphazene] were produced by electrospinning from solutions in tetrahydrofuran, methylethyl ketone, and acetone. The fiber diameter varied from 80 nm to 1.4 microm by changes in the concentration of the polymer solution. The electrospun nonwoven mats showed enhanced surface hydrophobicity compared to spun cast films with up to a 55 degrees increase in water contact angle. The hydrophobicity varied with fiber diameter and surface morphology, with contact angles to water being in the range of 135 degrees -159 degrees. A low value of hysteresis (<4 degrees) was recorded for the superhydrophobic surfaces. The extremely high hydrophobicity of these mats is a combined result of a fluorinated surface and the inherent surface roughness of an electrospun mat.     

Synthesis and Characterization of Poly[bis(p-oxybenzaldehyde diethylamino)phosphazenes], Poly[bis(p-oxybenzaldehyde)phosphazenes], Poly[bis(diethylamino)phosphazenes] and their Self- assembly Behaviors

Polydichlorophosphazenes (PDCP) were synthesized through ring opening polymerization of hexachlorocyclotriphosphazene (HCCP). The polymerization behavior of HCCP under varying conditions of time and amount of catalyst was investigated. The chlorine atoms in polydichlorophosphazenes (PDCP) were substituted with p-oxybenzaldehyde and (or) diethylamine to synthesize poly[bis(p-oxybenzaldehyde diethylamino)phosphazenes](PPOBADEAP), poly[bis(p-oxybenzaldehyde)phosphazenes] (PPOBAP) and poly[bis(diethyl amino) phosphazenes] (PDEAP). The supporting evidence for the success of this synthesis was provided by nuclear magnetic resonance (¹H-NMR, and ³¹P-NMR), gel permeation chromatography (GPC), and energy-dispersive X-ray spectroscopy (EDAX). The self-assembly behavior of PPOBADEAP, PPOBAP and PDEAP was observed in different solvents by the same concentration of polymers. The optical microscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images indicated that PPOBADEAP formed various morphologies in different solvents while PPOBAP and PDEAP did not show self-assembly behavior at the same conditions.     

Sorption and diffusion of organic vapors in poly[bis(trifluoroethoxy) phosphazene] and poly[bis(phenoxy)phosphazene] membranes

The sorption isotherms and diffusivities for vapors of some selected simple alcohols (methanol, ethanol, isopropanol, and 2-butanol), ketones (acetone, methyl ethyl ketone, and methyl isobutyl ketone), and aromatic compounds (benzene, toluene, and xylene) in poly[bis(trifluoroethoxy)phosphazene] (PTFEP) and poly[bis(phenoxy)phosphazene] (PPOP) were determined by integral sorption-desorption experiments at 35°C. The sorption isotherms for these compounds evaluated were almost linear to obey Henry's law for the determination of constant solubility of each solvent vapor species, and the corresponding permeabilities for them can be estimated according to the solution-diffusion model. The diffusivities for these vapors in PPOP (10⁻⁹∼10⁻⁸ cm²/s) were about one order smaller than those in PTFEP (10⁻⁸∼10⁻⁷ cm²/s) because the more rigid phenoxy groups and the higher crystallinity in PPOP may hinder the diffusion of sorbed molecules. Relatively weak dependence of diffusivity or permeability on the vapor activity (or concentration) was found, to be in contrast to the exponential dependence for many organic vapors in rubbery organic polymers, probably due to the limited increase of the free volume in sorption for these vapors in PTFEP and PPOP membranes.     

生物可降解聚丁二酸/甲基丁二酸丁二酯系列共聚物的合成和表征

摘要合成了一系列聚丁二酸/甲基丁二酸丁二醇共聚酯(PBSM), 利用DSC, ¹H NMR和X射线衍射等方法对共聚物组成、 热学性能、 结晶性能、 等温结晶行为进行了研究. 结果表明, 引入甲基丁二酸共聚单元较为显著地改变了聚丁二酸丁二酯(PBS)的热学性能, 利用Hoffman\|Weeks方程得到的共聚物平衡熔点随共聚物的组分含量增加而降低, 玻璃化转变温度亦有所降低, 熔点则符合无规共聚物的Flory方程. 此外, 利用Avrami方程分别研究了均聚物PBS及共聚物PBSM-20的等温结晶行为, 结果表明, 在所研究的温度范围内, 聚酯结晶速率随温度升高而降低, PBS和PBSM\-20的Avrami指数分别介于2.8~3.0和2.7~3.0之间, 结晶方式为三维生长异相成核, 而X射线衍射测试结果表明晶体结构几乎不变.     

Poly[methyl(phenyl)silanediyl] modified with dansyl fluorophore: Synthesis and photophysics

The syntheses and photophysical properties of novel luminescent polysilanes modified with dansyl fluorophores on various spacer (PMPSi‐n‐DNS) are reported. The modified polysilanes were prepared by condensation reaction of dansyl amines, such as 5‐(dimethylamino)naphthalene‐1‐sulfonohydrazide or N‐(ω‐aminoalkyl)‐5‐(dimethylamino)naphthalene‐1‐sulfonamides with formylated poly[methyl(phenyl)silanediyl], yielding Schiff bases. The aldehyde groups were incorporated into the parent polymer by a one‐step reaction with dichloromethyl methyl ether in the presence of Lewis acid. Influence of the alkyl chain length (n) on the photophysical properties was investigated using absorption, steady‐state, and time‐resolved photoluminescence (PL) spectroscopy. The excitation energy transfer from the polysilane backbone to dansyl fluorophore was proved. PL decay dynamics revealed the existence of more than one excited species. In solution, the decay curves of PMPSi‐DNS (no spacer) were double exponential, whereas for PMPSi‐n‐DNS (with spacer), and, in thin films, the decays were three‐exponential. Polymer light‐emitting devices (LEDs) were prepared from the blends of modified polysilane with electroluminescent polymer poly[2,5‐dimethoxy‐1,4‐phenylene‐1,2‐ethenylene‐2‐methoxy‐5‐(2‐ethylhexyloxy)‐(1,4‐phenylene‐1,2‐ethenylene)] (M3EH‐PPV). Compared with LED made of neat electroluminescent polymer, a significant performance improvement of blend LEDs was demonstrated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

聚(二甘氨酸乙酯)磷腈的合成及其生物相容性

氨基酸酯基取代的聚磷腈由于具有优良的水解性能并能降解成无毒产物, 因而成为一类非常有吸引力的生物医用材料. 采用两步法合成了聚(二甘氨酸乙酯)磷腈(PEGP). 首先采用开环聚合的方法制备中间体聚二氯磷腈, 再利用亲核取代方法合成PEGP. 通过红外光谱、核磁共振及元素分析等确证了产物的结构. 用蒸汽压下降法测得PEGP的分子量为12959, 用DSC法测得其玻璃化转变温度为-21.5 ℃. 采用体外细胞培养的方法评价了肝癌细胞HepG2和人工合成纤维细胞在PEGP薄膜表面的生长性能. 结果表明, 该材料不但没有细胞毒性, 反而具有良好的促进细胞生长的能力, 显示聚(二甘氨酸乙酯)磷腈在组织工程和再生医学中的潜在应用价值.     

Poly[bis(phosphinatoalanyl)phosphonates]

A series of coordination polymers, poly[bis(phosphinatoalanyl)phosphonates], [X(Y)AlOP(R)(O)OAl(Y′)(X′)]_n, were synthesized in which the terminal alanyl substituents (X,Y,X,′Y′) consisted of phosphinato (OPRR′O) or fluoro (F) moieties. The properties of the polymers were primarily dependent upon the type of terminal substituent and the hydrocarbon moieties (R,R′) on phosphorus. Polymers with four phosphinato moieties gave molecular weights M?_n to 120000 with intrinsic viscosities [η] from 1.5 to 18; the corresponding solids were partially crystalline, melted before decomposition, and were film-forming when larger phosphorus substituents were incorporated. Sequential replacement of the phosphinato moieties with fluorine resulted in molecular weights below 10000 and low viscosities. The properties of the polymers are examined, and the roles of substituents on probable structures are discussed.