In-situ synchrotron radiation SAXS study of structural deformation memory effect of the interfacial region in Al2O3/LDPE composite film

This paper employs the SAXS technique to study the microstructure evolution of nano Al₂O₃/low-density polyethylene (LDPE) composite film during temperature increase and decrease (including interfacial layer thickness, mass fractal and surface fractal), and discusses the deformation memory effect (DME) mechanism. Compared with the case of pure LDPE, there are some new phenomena observed in the Al₂O₃/LDPE composite film, such as an interfacial layer and surface fractal. The experimental results showed that, when the temperature rose from 25 °C to 180 °C, the interfacial layer thickness of the composite film increased from 2.8 nm to 3.5 nm, and the surface fractal dimension increased from 1.2 to 2.0, with the lamellar crystal of the PE molecular chains melting. When the temperature dropped from 180 °C to 30 °C, the interfacial layer thickness decreased from 3.5 nm to 3.0 nm, and the surface fractal dimension changed from 2.0 to 1.2, with the PE molecular chains recrystallizing. We found that the DME of the interface layer is that thickness and area increase when temperature rises and decrease when temperature decreases. The addition of Al₂O₃ nanoparticles into the polymer results in the adsorption of space charges in the matrix onto the nanoparticles and in the interfacial regions, which efficiently inhibits the space charge accumulation of the composite material in the gradient electrical field.     

Depth-resolved molecular structure and orientation of polymer thin films by synchrotron X-ray diffraction

An exemplary system suitable for optoelectronics applications, i.e. poly(3-hexylthiophene), hereinafter P3HT, deposited by spin casting onto silicon substrates functionalised by three selected molecules and then properly annealed, has been examined. Grazing Incidence X-ray Scattering (GIXS) measurements have been performed with 4-circle diffractometer, allowing for a fine control of sample axes movement.By choosing different grazing incident angles, diffraction patterns from different layers of polymeric thin films have been recorded. Both in-plane and out-of-plane geometries have been combined in order to obtain complementary structural information. In this way structural and orientational differences of the polymer along with the film thickness (?50 nm) have been highlighted. For all P3HT films spun on functionalized Si wafer, macromolecular layers close to the substrate surface give some evidence of higher order and orientation than those outmost the surface, and this behaviour is pronounced to a different extent depending on the functionalized molecules used. Contrariwise P3HT layers deposited onto bare Si wafer display reduced orientation and decreased crystallite size, especially at buried interface.     

DVC analysis of a polymer material subjected to tensile loading with synchrotron radiation tomography

Subsurface deformation behavior of a polymeric material is studied through the digital volume correlation (DVC) technique. Fundamental principles of the DVC technique are presented and the supplemental state-of-the-art algorithmic schemes to improve the efficiency and accuracy of the DVC analysis are also introduced. Tensile tests on an epoxy material are performed in conjunction with synchrotron radiation tomography. In order to create randomly distributed grayscale values in the tomograms for the following image analysis, microscale high-density particles are embedded when the epoxy specimens are fabricated. 3D tomographic images taken at multiple loading steps are utilized for the DVC analysis. The performance of the present DVC analysis is evaluated with the experimental data.     

Preparation and properties of ZnMoO4 anode materials with polymer network gel method

Polymer network gel method combines the advantages of solid-phase method and liquid phase method, triggering acrylamide (AM) radical polymerization in aqueous solution and N, N′- methylene bis acrylamide (MBAM) active double bond cross-linking reaction, forming polymer chains to form a three-dimensional network. The polymer network space formed by the gel is bound and evenly distributed to the ions in the solution, thereby reducing the contact and aggregation of molecules and achieving the purpose of uniform particle size and small particle size. The principle diagram of network gel is shown in Figure. Using cubic zinc acetate and ammonium molybdate tetrahydrate as raw materials, cubic ZnMoO₄ negative electrode materials were prepared with polymer network gel method. The polymer network gel method has various effects on the structure, morphology and electrochemical properties of materials. Besides, the calcination temperature and calcination time were also the key factors to the electrochemical properties of the materials. In this paper, the effects of the ratio of monomer and crosslinker, calcination temperature and calcination time on ZnMoO₄ materials were studied by single variable method, the preparation process was optimized, and its characterization and electrochemical tests were carried out. After 100 cycles, the optimized ZnMoO₄ electrode has a discharge capacity of 374.0 mAh· g^?1, 332.5, 263.5 and 177.1 mAh · g^?1 at current densities of 0.1, 0.5, 1.0 and 2.0 A g^?1, respectively. The electrochemical results show that the optimized ZnMoO₄ has high capacity, large rate capability and excellent cycle stability.     

Applications of synchrotron radiation micro-focus techniques to the study of polymer and biopolymer fibers

Micro-X-ray diffraction using synchrotron radiation has been developed in recent years as a tool for the local analysis of bulk polymer and biopolymer samples. Developments in X-ray optics associated with the introduction of third generation synchrotron radiation sources now allow routine experiments at the 1 μm scale. Several experiments at the 100 nm scale have also been reported with future developments aiming for the 50 nm scale and smaller. In this review, the current state of experimental possibilities have been summarised with an emphasis on in-situ fiber scanning and deformation studies. Examples of unconventional in-situ studies such as microhardness testing or hydration by inkjet printing systems demonstrate the largely unexplored potential of micro-X-ray diffraction techniques.     

Applications of synchrotron radiation in materials analysis

The synchrotron radiation (SR) emitted by circulating high-energy electrons has extraordinary properties: The light is intensive and bright, it is tunable and highly collimated, and finally, it is linearly polarized. These exceptional properties have initiated a unique revival of many spectroscopies using electromagnetic radiation. The techniques of special concern for materials analysis which are treated in this article are: X-ray absorption, reflection, fluorescence, diffraction and topography. A number of examples will be given in order to illustrate the possibilities of these techniques when SR is used.On leave of absence from Institut für Festkörperforschung, KFA Jülich, D-5170 Jülich, Federal Republic of Germany     

Thermoluminescence and synchrotron radiation studies on the persistent luminescence of BaAl2O4:Eu,Dy

The persistent luminescence materials, barium aluminates doped with Eu²⁺ and Dy³⁺ (BaAl₂O₄:Eu²⁺,Dy³⁺), were prepared with the combustion synthesis at temperatures between 400 and 600 °C as well as with the solid state reaction at 1500 °C. The concentrations of Eu²⁺/Dy³⁺ (in mol% of the Ba amount) ranged from 0.1/0.1 to 1.0/3.0. The electronic and defect energy level structures were studied with thermoluminescence (TL) and synchrotron radiation (SR) spectroscopies: UV-VUV excitation and emission, as well as with X-ray absorption near-edge structure (XANES) methods. Theoretical calculations using the density functional theory (DFT) were carried out in order to compare with the experimental data.     

Preparation method of porous polymer materials by radiation technique and its application

The radiation polymerization of hydrophilic hydroxyethyl methacrylate monomer solution at temperatures below 0 °C leads to the formation of a porous structure in the polymers. The melting peak of the eutectic water–monomer composition at the eutectic point (above ?24 °C) could be distingushed and a glass transition temperature was observed at ?96 °C. The porous structure was developed after melting small ice pieces in the polymers after polymerization. The porous structure formed above 0 °C contained discontinuous pores and that formed below 0 °C had continuous pores leading to reticular structure. In a mixture of water –dioxane –monomer, the pore diameter decreased with increasing monomer concentration. Replacing dioxane with decane led to a maximum pore diameter at 70% monomer concentration. The pore diameter in 70% monomer concentration using water and dioxane was 1～4 µm, maximum activity in immobilized enzyme tablets was observed at this diameter. The porous structure was also varied by controlling the polymerization temperature. The durability of the immobilized enzyme tablets was demonstrated by the retention of high enzyme activities after repeated batch enzyme reactions. Copyright © 2001 John Wiley & Sons, Ltd.     

Applications of synchrotron radiation in forensic trace evidence analysis

Synchrotron radiation sources have proven to be highly beneficial in many fields of research for the characterization of materials. However, only a very limited proportion of studies have been conducted by the forensic science community. This is an area in which the analytical benefits provided by synchrotron sources could prove to be very important. This review summarises the applications found for synchrotron radiation in a forensic trace evidence context as well as other areas of research that strive for similar analytical scrutiny and/or are applied to similar sample materials. The benefits of synchrotron radiation are discussed in relation to common infrared, X-ray fluorescence, tomographic and briefly, X-ray diffraction and scattering techniques. In addition, X-ray absorption fine structure analysis (incorporating XANES and EXAFS) is highlighted as an area in which significant contributions into the characterization of materials can be obtained. The implications of increased spatial resolution on microheterogeneity are also considered and discussed.     

Novel evaluation method for degradation rate of polymer electrolytes in fuel cells

A simple and new method has been developed to evaluate the degradation rate of polymer electrolytes caused by the cross-leakage of H₂ or O₂ in PEFCs. Mixed gas of H₂ and air with a constant composition was supplied to a sample powder suspended in water, e.g., consisting of Pt supporting carbon black coated with a perfluorosulfonated acid electrolyte. Fluoride ion released from the electrolyte into the water was quantitatively analyzed as a function of time. The electrolyte was decomposed only when H₂, O₂, and Pt coexisted. The present method enables to compare the durability of different electrolyte polymers directly under the same controlled environment within a short period.     

The change of the superstructure of semicrystalline polymers during deformation: results from small-angle scattering with synchrotron radiation

The change of the superstructure of different polyethylenes during uniaxial deformation is investigated. The method used is small-angle scattering with synchrotron radiation. For branched polyethylene (Lupolen 1840D) the whole deformation range is analyzed. Beginning with superstructure of the lamellar cluster type, the superstructure partly disappears on a time scale of a few minutes and the fibrillar structure is built up. The degree of destruction and rebuilding depends on the drawing temperature. For very high molecular weight polyethylene (GUR) a reversible change of the superstructure at higher deformation ratios and at different temperatures is observed. The superstructure of (ethylene—hexene) copolymers (TIPELIN) at high draw ratios depends on the drawing temperature and is almost independent of the side group content. Interfibrillar microcracks parallel to the draw direction are produced in samples with a low side group content for draw ratios λ ≥ 1.5.     

Recycling of waste from polymer materials: An overview of the recent works

Polymer recycling is a way to reduce environmental problems caused by polymeric waste accumulation generated from day-to-day applications of polymer materials such packaging and construction. The recycling of polymeric waste helps to conserve natural resource because the most of polymer materials are made from oil and gas. This paper reviews the recent progress on recycling of polymeric waste form some traditional polymers and their systems (blends and composites) such as polyethylene (PE), polypropylene (PP), and polystyrene (PS), and introduces the mechanical and chemical recycling concepts. In addition, the effect of mechanical recycling on properties including the mechanical, thermal, rheological and processing properties of the recycled materials is highlighted in the present paper.     

EPR study of radiation damage to DNA irradiated with synchrotron soft X-rays around nitrogen and oxygen K-edge

In order to obtain detailed insights into the physicochemical mechanism of DNA damage induction, “in situ” measurement of electron paramagnetic resonance (EPR) signal from DNA constituent nucleobases, guanine and adenine, has been performed in a vacuum using monochromatic synchrotron soft X-rays. We found that short-lived unpaired electron species arise only during irradiation to the evaporated thin film on a surface. The EPR spectrum of the short-lived species significantly depends on the photon energy irradiated, and the spin concentration obtained from the EPR spectra shows a similar fine structure to the X-ray photoabsorption spectra (X-ray absorption near edge structure; XANES). For the adenine sample, the spin concentration alters strikingly by water absorption on the sample surface. Trapping of photo- or Auger electrons into a newly generated potential in the nucleobases as the consequence of photoelectric effect is suggested as mechanisms of the induction of the short-lived species.     

Elucidation of the relationships of structure-process-property for different ethylene/α-olefin copolymers during film blowing: An in-situ synchrotron radiation X-ray scattering study

The copolymerization of ethylene and different α-olefins could result in polyethylene (PE) with different structural topologies, and lead to polyethylene products with different macroscopic performances. Herein, three different polyethylene samples, namely low-density polyethylene (l-PE), metallocene catalyzed ethylene-hexene copolymer (h-PE) and ethylene-octene copolymer (o-PE), were selected as representatives to construct the structure-process-property relationship during film blowing. The detailed crystal-based network evolution during film blowing was first characterized by in-situ synchrotron radiation X-ray scattering. The crystallization process of l-PE film is determined by the coupling effects of temperature and flow, while those of h-PE and o-PE films are dominated by the temperature. Furthermore, the hierarchical crystal structure from the molecular scale to micrometers of final films and segmental dynamics were systematically characterized by multiple ex-situ characterization techniques, i.e. Solid-State NMR, FTIR, SEM. l-PE film shows the crystalline morphology of the row-nucleated structure, whereas h-PE and o-PE show spherulite-like superstructure with better mechanical properties. The current study tentatively constructs the relation of primary chemical structure, microstructural evolution and macroscopic performances of different polyethylene copolymers during film blowing.     

Analysis of low Z elements on Si wafer surfaces with synchrotron radiation induced total reflection X-ray fluorescence at SSRL, Beamline 3-3: comparison of droplets with spin coated wafers

The unique properties of synchrotron radiation, such as high incident flux combined with low divergence, its linear polarization and energy tunability, make it an ideal excitation source for total reflection X-ray fluorescence (TXRF) spectroscopy in order to non-destructively detect trace impurities of transition metals on Si wafer surfaces. When used with a detector suitable for the determination of low energy radiation this technique can be extended to the detection of low-Z elements, such as Al, Na and Mg. Experiments have been performed at SSRL Beamline 3-3, a bending magnet beamline using monochromatic radiation from a double multilayer monochromator. The wafer was mounted vertically in front of the detector, which was aligned along the linear polarization vector of the incoming synchrotron radiation. This configuration allows the detector to accept a large solid angle as well as to take advantage of the reduced scattered X-ray intensity emitted in the direction of the linear polarization vector. A comparison between droplet samples and spin coated samples was done, in order to compare the capabilities of vapor phase decomposition (VPD-TXRF) with conventional SR-straight-TXRF. Detection limits in the range of 50 fg corresponding to 2E10 atoms/cm² have been obtained for Na. The spin coated samples, prepared from solutions containing an equal amount of Na, Mg and Al showed an unexpected result when performing a scan of the angle of incidence of the incoming X-rays suggesting a different adsorption behavior of the elements in a multielement solution on the wafer surface. The observation of this behavior is important because the spin coating technique is the standard method for the preparation of surface standards in semiconductor quality control. This effect could be characteristic of the Na, Mg, Al solution used, but the angle dependence of the fluorescence signal of a standard should always be investigated before using the standard for calibration of the apparatus and quantification.     

Electronic states of 1,4-bis(phenylethynyl)benzene: A synchrotron radiation linear dichroism investigation

The electronic transitions of 1,4-bis(phenylethynyl)benzene (BPEB) were investigated by UV synchrotron radiation linear dichroism (SRLD) spectroscopy in the range 25,000-58,000 cm⁻¹ (400-170 nm) on molecular samples aligned in stretched polyethylene. The investigation was supported by variable temperature spectroscopy and by quantum chemical calculations in the LCOAO and TD-DFT models. The molecular alignment of BPEB in stretched polyethylene was found to be remarkably efficient, leading to an orientation factor equal to 0.95 for the long molecular axis. The observed band shape depended strongly on the degree of stretching and on temperature. The combined experimental and theoretical evidence leads to the characterization of several previously unobserved transitions and supports the assumption that BPEB adopts a nearly planar conformation in stretched polyethylene.     

Trace elements in human cancerous and healthy tissues: A comparative study by EDXRF,TXRF, synchrotron radiation and PIXE

It is known that trace elements play an important role in a number of biological processes. These include the activation or inhibition of enzymatic reactions, competition between elements and metal proteins for binding positions and modifications in the permeability of cellular membranes. These elements may also influence carcinogenic processes, thus the knowledge of trace element concentrations in healthy and neoplastic tissues might help in diagnostic and in the etiology and development of cancer.     

An improved test method for characterising touch properties of porous polymeric materials

A new test method and instrument was developed to provide overall evaluation and characterisation of touch properties of porous polymeric materials. The test method and instrument can simulate the dynamic contact process between human skin and porous polymeric materials and obtain the mechanical and physical performance during contact. In the improved test method, a new measurement principle was proposed, and the mechanical device was redesigned, including surface friction measurement components. Most indices were redefined and the grading and classification methods were studied to give a direct overall evaluation of the touch properties for industrial applications. The objective test results and analysis, subjective evaluation method and prediction model of touch properties are also presented. The improved test method provides an objective measurement of thermal-mechanical properties using a single measuring instrument for new product development and quality control of porous polymeric materials.     

Influence of functional nanoparticles on the photostability of polymer materials: Recent progress and further applications

The photochemical behaviour of polymer–nanoparticles/nanocomposites has been studied depending on the geometry of the nanofiller and an overview of the studies reported in the last decade is tentatively given. Depending on their functionality, nanoparticles can impact the durability of the nanocomposite materials under light irradiation. The behaviour to UV-light exposure in presence of oxygen of various types of nanocomposites with clays, LDH and carbon nanotubes has been investigated and recent progress on the influence of functional nanoparticles on the polymer photodegradation is reported. The influence of photocatalytic (ZnO and TiO₂) nanoparticles and phosphors on the photooxidation of the polymeric matrix and the durability of the material properties are characterized. From a general point of view, the stabilization strategy of polymer nanocomposites must be adapted depending on the nanofiller.     

Degradation issues of polymer materials used in railway field

Polymer materials used in railway field are degraded by environmental factors such as thermal, oxidative, photolytic, hydrolytic, and mechanical. The expected service life of the polymer materials used in railway field is approximately 20 years that is relatively long period for the polymer material; therefore, respective degradation factors should be well considered. Some of the degradation conditions indicate similar mechanism. The oxidative reaction was seen in every degradation conditions under air atmosphere. The hydrolytic reaction was mainly observed in chemical and biological degradations. The degradation behavior of the polymer material was analyzed by various methods. FTIR, thermal analysis (TG, DSC), and molecular weight determination were mainly applied for its purpose. However, the degradation mechanism of practical products made of polymer material was insufficiently studied and the exchange criteria of the products depended on the visual inspection without the suitable degradation analysis not only in the railway field but also in other commercial and industrial fields. In addition, most of the methods to analyze degradation of polymer material are performed on the standard specimen forms. For the installed product, some kinds of damage are generated through the sample collection process; therefore, the damaged products have to be exchanged for brand new ones or repaired totally to be used for more period. Moreover, it is hard to suspend the railway service for the degradation analysis of polymer products. From these backgrounds, the prospect of degradation analysis related to polymer materials used in railway field was proposed.