Influences on the rotated structure of diiron dithiolate complexes: electronic asymmetry vs. secondary coordination sphere interaction

In the pursuit of a "rotated" structure, and exploration of the influence of the aza nitrogen lone pair, the Fe(I)Fe(I) model complexes wherein two Fe(CO)(3-x)P(x) moieties are significantly twisted from the ideal configuration (torsion angle >30°) are reported. [Fe(2)(μ-S(CH(2))(2)N(i)Pr(X)(CH(2))(2)S)(CO)(4)(κ(2)-dppe)](2)(2+) (X = H, 4; Me, 5) prepared from protonation and methylation, respectively, of [Fe(2)(μ-S(CH(2))(2)N(i)Pr(CH(2))(2)S)(CO)(4)(κ(2)-dppe)](2), 1, possess Φ angles of 34.1 and 35.4° (av.), respectively. Such dramatic twist is attributed to asymmetric substitution within the Fe(2) unit in which a dppe ligand is coordinated to one Fe site in the κ(2)-mode. In the presence of the N···C(CO(ap)) interaction, the torsion angle is decreased to 10.8°, suggesting availability of lone pairs of the aza nitrogen sites within 1 is in control of the twist. Backbones of the bridging diphosphine ligands also affect distortion. For a shorter ligand, the more compact structure of [Fe(2)(μ-S(CH(2))(2)N(i)Pr(CH(2))(2)S)(μ-dppm)(CO)(4)](2), 7, is formed. Dppm in a bridging manner allows achievement of the nearly eclipsed configuration. In contrast, dppe in [Fe(2)(μ-S(CH(2))(2)N(i)Pr(CH(2))(2)S)(μ-dppe)(CO)(4)](2), 6, could twist the Fe(CO)(3-x)L(x) fragment to adopt the least strained structure. In addition, the NC(CO(ap)) interaction would direct the twist towards a specific direction for the closer contact. In return, the shorter N···C(CO(ap)) distance of 3.721(7) ? and larger Φ angle of 26.5° are obtained in 6. For comparison, 3.987(7) ? and 3.9° of the corresponding parameters are observed in 7. Conversion of (μ-dppe)[Fe(2)(μ-S(CH(2))(2)N(i)Pr(CH(2))(2)S)(CO)(5)](2), 2, to complex 1 via an associative mechanism is studied.     

A carbonyl-rich bridging hydride complex relevant to the Fe-Fe hydrogenase active site

Protonation of Fe(2)(μ-S(2)C(3)H(6))(CO)(6) with an acid derived from [SiEt(3)][B(C(6)F(5))(4)] and HCl affords a hydride-bridged dimer.     

Bimetallic carbonyl thiolates as functional models for Fe-only hydrogenases

The anion [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PMe(3))](-) (2(-)) is protonated by sulfuric or toluenesulfonic acid to give HFe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PMe(3)) (2H), the structure of which has the hydride bridging the Fe atoms with the PMe(3) and CN(-) trans to the same sulfur atom. (1)H, (13)C, and (31)P NMR spectroscopy revealed that HFe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PMe(3)) is stereochemically rigid on the NMR time scale with four inequivalent carbonyl ligands. Treatment of 2(-) with (Me(3)O)BF(4) gave Fe(2)(S(2)C(3)H(6))(CNMe)(CO)(4)(PMe(3)) (2Me). The Et(4)NCN-induced reaction of Fe(2)(S(2)C(3)H(6))(CO)(6) with P(OMe)(3) gave [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)[P(OMe)(3)]](-) (4). Spectroscopic and electrochemical measurements indicate that 2H can be further protonated at nitrogen to give [HFe(2)(S(2)C(3)H(6))(CNH)(CO)(4)(PMe(3))](+) (2H(2)(+)). Electrochemical and analytical data show that reduction of 2H(2)(+) gives H(2) and 2(-). Parallel electrochemical studies on [HFe(2)(S(2)C(3)H(6))(CO)(4)(PMe(3))(2)](+) (3H(+)) in acidic solutions led also to catalytic proton reduction. The 3H(+)/3H couple is reversible, whereas the 2H(2)(+)/2H(2) couple is not, because of the efficiency of the latter as a proton reduction catalyst. Proton reduction is proposed to involve protonation of reduced diiron hydrides. DFT calculations establish that the regiochemistry of protonation is subtly dependent on the coligands but is more favorable to occur at the Fe-Fe bond for [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PMe(3))](-) than for [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PH(3))](-) or [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)[P(OMe)(3)]](-). The Fe(2)H unit stabilizes the conformer with eclipsed CN and PMe(3) because of an attractive electrostatic interaction between these ligands.     

Synthetic and structural investigations of linear and macrocyclic nickel/iron/sulfur cluster complexes

Three series of new Ni/Fe/S cluster complexes have been prepared and structurally characterized. One series of such complexes includes the linear type of (diphosphine)Ni-bridged double-butterfly Fe/S complexes [(μ-RS)(μ-S═CS)Fe(2)(CO)(6)](2)[Ni(diphosphine)] (1-6; R = Et, t-Bu, n-Bu, Ph; diphosphine = dppv, dppe, dppb), which were prepared by reactions of monoanions [(μ-RS)(μ-CO)Fe(2)(CO)(6)](-) (generated in situ from Fe(3)(CO)(12), Et(3)N, and RSH) with excess CS(2), followed by treatment of the resulting monoanions [(μ-RS)(μ-S═CS)Fe(2)(CO)(6)](-)with (diphosphine)NiCl(2). The second series consists of the macrocyclic type of (diphosphine)Ni-bridged double-butterfly Fe/S complexes [μ-S(CH(2))(4)S-μ][(μ-S═CS)Fe(2)(CO)(6)](2)[Ni(diphosphine)] (7-9; diphosphine = dppv, dppe, dppb), which were produced by the reaction of dianion [{μ-S(CH(2))(4)S-μ}{(μ-CO)Fe(2)(CO)(6)}(2)](2-) (formed in situ from Fe(3)(CO)(12), Et(3)N, and dithiol HS(CH(2))(4)SH with excess CS(2), followed by treatment of the resulting dianion [{μ-S(CH(2))(4)S-μ}{(μ-S═CS)Fe(2)(CO)(6)}(2)](2-) with (diphosphine)NiCl(2). However, more interestingly, when dithiol HS(CH(2))(4)SH (used for the production of 7-9) was replaced by HS(CH(2))(3)SH (a dithiol with a shorter carbon chain), the sequential reactions afforded another type of macrocyclic Ni/Fe/S complex, namely, the (diphosphine)Ni-bridged quadruple-butterfly Fe/S complexes [{μ-S(CH(2))(3)S-μ}{(μ-S═CS)Fe(2)(CO)(6)}(2)](2)[Ni(diphosphine)](2) (10-12; diphosphine = dppv, dppe, dppb). While a possible pathway for the production of the two types of novel metallomacrocycles 7-12 is suggested, all of the new complexes 1-12 were characterized by elemental analysis and spectroscopy and some of them by X-ray crystallography.     

New class of diiron dithiolates related to the Fe-only hydrogenase active site: synthesis and characterization of [Fe2(SR)(2)(CNMe)7]2+

Electron-rich polyisocyano derivatives Fe(2)(S(2)C(n)H(2n)(CO)(6-x)(CNMe)(x) (x approximately 4) undergo oxidatively induced (FeCp(2)(+)) reaction with additional CNMe to give [Fe(2)(SR)(2)(CNMe)(7)](PF(6))(2), a new class of iron thiolates. Crystallographic characterization established that the 34 e(-) dinuclear core resembles the oxidized (H(2)-binding) form of the active sites of the Fe-only hydrogenases, key features being the face-sharing bioctahedral geometry, the mu-CX ligand, and an Fe-Fe separation of 2.61 A. Oxidation of the phenylthiolate Fe(2)(SPh)(2)(CO)(2)(CNMe)(4) led to mononuclear [Fe(SPh)(CNMe)(5)](PF(6)), which is analogous to [Fe(2)(SR)(2)(CNMe)(10)](PF(6))(2) formed upon treatment of [Fe(2)(S(2)C(3)H(6))(CNMe)(7)](PF(6))(2) with excess CNMe.     

Isolation, observation, and computational modeling of proposed intermediates in catalytic proton reductions with the hydrogenase mimic Fe2(CO)6S2C6H4

Proposed electrocatalytic proton reduction intermediates of hydrogenase mimics were synthesized, observed, and studied computationally. A new mechanism for H(2) generation appears to involve Fe(2)(CO)(6)(1,2-S(2)C(6)H(4)) (3), the dianions {[1,2-S(2)C(6)H(4)][Fe(CO)(3)(μ-CO)Fe(CO)(2)](2-) (3(2-)), the bridging hydride {[1,2-S(2)C(6)H(4)][Fe(CO)(3)(μ-CO)(μ-H)Fe(CO)(2)]}(-), 3H(-)(bridging), and the terminal hydride 3H(-)(term-stag), {[1,2-S(2)C(6)H(4)][HFe(CO)(3)Fe(CO)(3)]}(-), as intermediates. The dimeric sodium derivative of 3(2-), {[Na(2)(THF)(OEt(2))(3)][3(2-)]}(2) (4) was isolated from reaction of Fe(2)(CO)(6)(1,2-S(2)C(6)H(4)) (3) with excess sodium and was characterized by X-ray crystallography. It possesses a bridging CO and an unsymmetrically bridging dithiolate ligand. Complex 4 reacts with 4 equiv. of triflic or benzoic acid (2 equiv. per Fe center) to generate H(2) and 3 in 75% and 60% yields, respectively. Reaction of 4 with 2 equiv. of benzoic acid generated two hydrides in a 1.7 : 1 ratio (by (1)H NMR spectroscopy). Chemical shift calculations on geometry optimized structures of possible hydride isomers strongly suggest that the main product, 3H(-)(bridging), possesses a bridging hydride ligand, while the minor product is a terminal hydride, 3H(-)(term-stag). Computational studies support a catalytic proton reduction mechanism involving a two-electron reduction of 3 that severs an Fe-S bond to generate a dangling thiolate and an electron rich Fe center. The latter iron center is the initial site of protonation, and this event is followed by protonation at the dangling thiolate to give the thiol thiolate [Fe(2)H(CO)(6)(1,2-SHSC(6)H(4))]. This species then undergoes an intramolecular acid-base reaction to form a dihydrogen complex that loses H(2) and regenerates 3.     

Dinuclear iron isonitrile complexes: models for the iron hydrogenase active site

Reaction of Fe(2)(mu-S(2)C(3)H(6))(CO)(6) (1) with 2 equiv of t-BuNC affords a disubstitued species Fe(2)(mu-S(2)C(3)H(6))(CN-t-Bu)(2)(CO)(4) (2). The structure of 2 has been determined by X-ray crystallography, which shows that in the solid state both isonitrile ligands are cis to sulfur. In solution, NMR and IR spectroscopy suggest that multiple isomers are present. Protonation of 2 occurs at the Fe-Fe bond to give a cationic complex 3 as four different isomeric species. Complex 3 does not react with deuterium gas (98 psi) in the absence of light. Irradiation of solutions of 3 with visible light under D(2) gas leads to formation of HD.     

Binuclear methylborole iron carbonyls: iron-iron multiple bonds and perpendicular structures

Methylborole iron tricarbonyl, (η(5)-C(4)H(4)BCH(3))Fe(CO)(3), is known experimentally and is a potential source of binuclear (C(4)H(4)BCH(3))(2)Fe(2)(CO)(n) (n = 5, 4, 3, 2, 1) derivatives through reactions such as photolysis. In this connection the lowest energy (C(4)H(4)BCH(3))(2)Fe(2)(CO)(5) structures are predicted theoretically to have a single bridging carbonyl group and Fe-Fe distances consistent with formal single bonds. The lowest energy (C(4)H(4)BCH(3))(2)Fe(2)(CO)(4) structures have two bridging carbonyl groups and Fe═Fe distances suggesting formal double bonds. Analogously, the lowest energy (C(4)H(4)BCH(3))(2)Fe(2)(CO)(3) structures have three bridging carbonyl groups and very short Fe≡Fe distances suggesting formal triple bonds. The tetracarbonyl (C(4)H(4)BCH(3))(2)Fe(2)(CO)(4) is predicted to be thermodynamically unstable toward disproportionation into (C(4)H(4)BCH(3))(2)Fe(2)(CO)(5) + (C(4)H(4)BCH(3))(2)Fe(2)(CO)(3), whereas the tricarbonyl is thermodynamically viable toward analogous disproportionation. The lowest energy structures of the more highly unsaturated methylborole iron carbonyls (C(4)H(4)BCH(3))(2)Fe(2)(CO)(n) (n = 2, 1) have hydrogen atoms bridging an iron-carbon bond. In addition, the lowest energy (C(4)H(4)BCH(3))(2)Fe(2)(CO) structures are "slipped perpendicular" structures with bridging methylborole ligands, a terminal carbonyl group, and agostic CH(3)→Fe interactions involving the methyl hydrogens. Thus, in these highly unsaturated systems the methyl substituent in the methylborole ligand chosen in this work is not an "innocent bystander" but instead participates in the metal-ligand bonding.     

Dithiocarboxylate complexes of ruthenium(II) and osmium(II)

The ruthenium(II) complexes [Ru(R)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh) are formed on reaction of IPr·CS(2) with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] (BTD = 2,1,3-benzothiadiazole) or [Ru(C(C≡CPh)=CHPh)Cl(CO)(PPh(3))(2)] in the presence of ammonium hexafluorophosphate. Similarly, the complexes [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) are formed in the same manner when ICy·CS(2) is employed. The ligand IMes·CS(2) reacts with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] to form the compounds [Ru(R)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh). Two osmium analogues, [Os(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) and [Os(C(C≡CPh)=CHPh)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) were also prepared. When the more bulky diisopropylphenyl derivative IDip·CS(2) is used, an unusual product, [Ru(κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IDip)Cl(CO)(PPh(3))(2)](+), with a migrated vinyl group, is obtained. Over extended reaction times, [Ru(CH=CHC(6)H(4)Me-4)Cl(BTD)(CO)(PPh(3))(2)] also reacts with IMes·CS(2) and NH(4)PF(6) to yield the analogous product [Ru{κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IMes}Cl(CO)(PPh(3))(2)](+)via the intermediate [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+). Structural studies are reported for [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)]PF(6) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)]PF(6).     

Static and dynamic quenching of Ru(II) polypyridyl excited states by iodide

The metal-to-ligand charge-transfer (MLCT) excited states of Ru(bpy)(2)(deeb)(PF(6))(2), where bpy is 2,2-bipyridine and deeb is 4,4'-(CO(2)CH(2)CH(3))(2)-2,2'-bipyridine, in dichloromethane were found to be efficiently quenched by iodide at room temperature. The ionic strength dependence of the UV-visible absorption spectra gave evidence for ion pairing. Iodide was found to quench the excited states by static and dynamic mechanisms. Stern-Volmer and Benesi-Hildebrand analysis of the spectral data provided a self-consistent estimate of the iodide-Ru(bpy)(2)(deeb)(2+) adduct in dichloromethane, K = 59 700 M(-1). Transient absorption studies clearly demonstrated an electron-transfer quenching mechanism with transient formation of I(2)(*)(-) in high yield, phi = 0.25 for 355 or 532 nm excitation. For Ru(bpy)(2)(deeb)(PF(6))(2) in acetonitrile, similar behavior could be observed at higher iodide concentrations than that required in dichloromethane. The parent Ru(bpy)(3)(2+) compound also ion pairs with iodide in CH(2)Cl(2), and light excitation gave a higher I(2)(*)(-) yield, phi = 0.50. X-ray crystallographic, IR, and Raman data gave evidence for interactions between iodide and the coordinated deeb ligand in the solid state.     

Electrocatalytic proton reduction by phosphido-bridged diiron carbonyl compounds: distant relations to the H-cluster?

Intermediates formed during reduction of Fe(2)(mu-PPh(2))(2)(CO)(6) (1) in the presence of protons have been identified by spectroelectrochemical, continuous-flow, and interrupted-flow techniques. The mechanism for electrocatalytic proton reduction suggested by these observations yields digital simulation of the voltammetry in close agreement with measurements conducted in THF over a range of acid concentrations. The mechanism for electrocatalytic proton reduction involves initial formation of the dianion, 1(2-), which is doubly protonated prior to further reduction and dihydrogen elimination. The IR spectra of the singly and doubly protonated forms of 1(2-) indicate structures corresponding to [FeH(CO)(3)(mu-PPh(2))(2)Fe(CO)(3)](-) (1H-) and FeH(CO)(3)(mu-PPh(2))(2)FeH(CO)(3) (1H(2)). The thiolato and dithiolato analogues of 1 exhibit electrocatalytic proton reduction associated with the two-electron reduction step, and this implies that the corresponding two-electron reduced doubly protonated species is unstable with respect to dihydrogen elimination. The stability of 1H(2) is most likely to be due to the weak interactions between the iron centers of the flattened [2Fe2P] core. Whereas 1H(2) is stable in the absence of a reducing potential, 1H- rearranges rapidly to a product previously described as [Fe(2)(mu-PPh(2))(mu-CO)(PHPh(2))(CO)(5)](-) (1H-(W)). Another protonation product of 1(2-), previously formulated as [Fe(2)(mu-PPh(2))(2)(mu-CO)H(CO)(5)](-), has been reformulated as [Fe(2)(mu-PPh(2))(mu-CO)(CO)(6)](-) (2) on the basis of a range of spectroscopic measurements. Solution EXAFS measurements of 1, 1(2-), 1H-(W), and 2 are reported, and these yield model-independent Fe-Fe distances of 2.61 (1), 3.58 (1(2-)), 2.58 (1H-(W)), and 2.59 A (2). The presence of an Fe-Fe bond for both 1H-(W) and 2 is a key aspect of the proposed structures, and this strongly supports the deductions based on spectroscopic evidence. The fits of the solution EXAFS to different structural models give statistics in agreement with the proposed structures.     

Synthesis and decarbonylation reactions of the triiron phosphinidene complex [Fe3Cp3(μ-H)(μ3-PPh)(CO)4]: easy cleavage and formation of P-H and Fe-Fe bonds

The binuclear phosphine complex [Fe(2)Cp(2)(μ-CO)(2)(CO)(PH(2)Ph)] (Cp = η(5)-C(5)H(5)) reacted with the acetonitrile adduct [Fe(2)Cp(2)(μ-CO)(2)(CO)(NCMe)] in dichloromethane at 293 K to give the trinuclear hydride-phosphinidene derivative [Fe(3)Cp(3)(μ-H)(μ(3)-PPh)(CO)(4)] as a mixture of cis,anti and trans isomers (Fe-Fe = 2.7217(6) ? for the cis,anti isomer). In contrast, photochemical treatment of the phosphine complex with [Fe(2)Cp(2)(CO)(4)] gave the phosphide-bridged complex trans-[Fe(3)Cp(3)(μ-PHPh)(μ-CO)(2)(CO)(3)] as the major product, along with small amounts of the binuclear hydride-phosphide complexes [Fe(2)Cp(2)(μ-H)(μ-PHPh)(CO)(2)] (cis and trans isomers), which are more selectively prepared from [Fe(2)Cp(2)(CO)(4)] and PH(2)Ph at 388 K. The photochemical decarbonylation of either of the mentioned triiron compounds led reversibly to three different products depending on the reaction conditions: (a) the 48-electron phosphinidene cluster [Fe(3)Cp(3)(μ-H)(μ(3)-PPh)(μ-CO)(2)] (Fe-Fe = 2.592(2)-2.718(2) ?); (b) the 50-electron complex [Fe(3)Cp(3)(μ-H)(μ(3)-PPh)(μ-CO)(CO)(2)], also having carbonyl- and hydride-bridged metal-metal bonds (Fe-Fe = 2.6177(3) and 2.7611(4) ?, respectively); and (c) the 48-electron phosphide cluster [Fe(3)Cp(3)(μ-PHPh)(μ(3)-CO)(μ-CO)(2)], an isomer of the latter phosphinidene complex now having three intermetallic bonds (Fe-Fe = 2.5332(8)-2.6158(8) ?).     

Solvation effects on angular distributions in H- (NH3)n and NH2(-) (NH3)n photodetachment: role of solute electronic structure

We report 355 and 532 nm photoelectron imaging results for H(-)(NH(3))(n) and NH(2)(-)(NH(3))(n), n = 0-5. The photoelectron spectra are consistent with the electrostatic picture of a charged solute (H(-) or NH(2)(-)) solvated by n ammonia molecules. For a given number of solvent molecules, the NH(2)(-) core anion is stabilized more strongly than H(-), yet the photoelectron angular distributions for solvated H(-) deviate more strongly from the unsolvated limit than those for solvated NH(2)(-). Hence, we conclude that solvation effects on photoelectron angular distributions are dependent on the electronic structure of the anion, i.e., the type of the initial orbital of the photodetached electron, rather than merely the strength of solvation interactions. We also find evidence of photofragmentation and autodetachment of NH(2)(-)(NH(3))(2-5), as well as autodetachment of H(-)(NH(3))(5), upon 532 nm excitation of these species.     

Electroswitchable photoluminescence activity: synthesis, spectroscopy, electrochemistry, photophysics, and X-ray crystal and electronic structures of [Re(bpy)(CO)3(C[triple bond]C[bond]C6H4[bond]C[triple bond]C)Fe(C5Me5)(dppe)][PF6](n) (n = 0, 1)

A novel heterobimetallic alkynyl-bridged complex, [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C)Fe(C(5)Me(5))(dppe)], 1, and its oxidized species, [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C)Fe(C(5)Me(5))(dppe)][PF(6)], 2, have been synthesized and their X-ray crystal structures determined. A related vinylidene complex, [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond](H)C[double bond]C)Fe(C(5)Me(5))(dppe)][PF(6)], 3, has also been synthesized and characterized. The cyclic voltammogram of 1 shows a quasireversible reduction couple at -1.49 V (vs SCE), a fully reversible oxidation at -0.19 V, and a quasireversible oxidation at +0.88 V. In accord with the electrochemical results, density-functional theory calculations on the hydrogen-substituted model complex Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C)Fe(C(5)H(5))(dHpe) (Cp = C(5)H(5), dHpe = H(2)P[bond](CH(2))(2)[bond]PH(2)) (1-H) show that the LUMO is mainly bipyridine ligand pi* in character while the HOMO is largely iron(II) d orbital in character. The electronic absorption spectrum of 1 shows low-energy absorption at 390 nm with a 420 nm shoulder in CH(2)Cl(2), while that of 2 exhibits less intense low-energy bands at 432 and 474 nm and additional low-energy bands in the NIR at ca. 830, 1389, and 1773 nm. Unlike the related luminescent rhenium(I)-alkynyl complex [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C[bond]H)], 4, complex 1 is found to be nonemissive, and such a phenomenon is attributed to an intramolecular quenching of the emissive d pi(Re) --> pi*(bpy) (3)MLCT state by the low-lying MLCT and LF excited states of the iron moiety. Interestingly, switching on of the luminescence property derived from the d pi(Re) --> pi*(bpy) (3)MLCT state can be demonstrated in the oxidized species 2 and the related vinylidene analogue 3 due to the absence of the quenching pathway.     

Synthetic and structural studies on new diiron azadithiolate (ADT)-type model compounds for active site of [FeFe]hydrogenases

A series of new diiron azadithiolate (ADT) complexes (1-8), which could be regarded as the active site models of [FeFe]hydrogenases, have been synthesized starting from parent complex [(μ-SCH(2))(2)NCH(2)CH(2)OH]Fe(2)(CO)(6) (A). Treatment of A with ethyl malonyl chloride or malonyl dichloride in the presence of pyridine afforded the malonyl-containing complexes [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CCH(2)CO(2)Et]Fe(2)(CO)(6) (1) and [Fe(2)(CO)(6)(μ-SCH(2))(2)NCH(2)CH(2)O(2)C](2)CH(2) (2). Further treatment of 1 and 2 with PPh(3) under different conditions produced the PPh(3)-substituted complexes [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CCH(2)CO(2)Et]Fe(2)(CO)(5)(PPh(3)) (3), [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CCH(2)CO(2)Et]Fe(2)(CO)(4)(PPh(3))(2) (4), and [Fe(2)(CO)(5)(PPh(3))(μ-SCH(2))(2)NCH(2)CH(2)O(2)C](2)CH(2) (5). More interestingly, complexes 1-3 could react with C(60) in the presence of CBr(4) and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) via Bingel-Hirsch reaction to give the C(60)-containing complexes [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CC(C(60))CO(2)Et]Fe(2)(CO)(6) (6), [Fe(2)(CO)(6)(μ-SCH(2))(2)NCH(2)CH(2)O(2)C](2)C(C(60)) (7), and [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CC(C(60))CO(2)Et]Fe(2)(CO)(5)(PPh(3)) (8). The new ADT-type models 1-8 were characterized by elemental analysis and spectroscopy, whereas 2-4 were further studied by X-ray crystallography and 6-8 investigated in detail by DFT methods.     

Fe2(SR)2(mu-CO)(CNMe)6]2+ and analogues: a new class of diiron dithiolates as structural models for the H(ox)Air state of the fe-only hydrogenase

Low-temperature oxidation of Fe(2)(S(2)C(n)H(2n)(CNMe)(6-x)(CO)x (n = 2, 3; x = 2, 3) affords a family of mixed carbonyl-isocyanides of the type [Fe(2)(S(2)C(n)H(2n)(CO)x(CNMe)(7-x)](2+). The degree of substitution is controlled by the RNC/Fe ratio, as well as the degree of initial substitution at iron, with tricarbonyl derivatives favoring more highly carbonylated products. The structures of the monocarbonyl derivatives [Fe(2)(S(2)C(n)H(2n))(mu-CO)(CNMe)(6)](PF(6))(2) (n = 2,3) established crystallographically and spectroscopically, are quite similar, with Fe---Fe distances of ca. 2.5 A, although the mu-CO is unsymmetrical in the propanedithiolate derivative. Isomeric forms of [Fe(2)(S(2)C(3)H(6))(CO)(CNMe)(6)](PF(6))(2) were characterized where the CO is bridging or terminal, the greatest structural difference being the 0.1 A elongation of the Fe---Fe distance when MeNC (vs CO) is bridging. In the dicarbonyl species, [Fe(2)(S(2)C(2)H(4))(mu-CO)(CO)(CNMe)(5)](PF(6))(2), the terminal CO ligand is situated at one of the basal sites, not trans to the Fe---Fe vector. Oxidation of Fe(2)(S(2)C(2)H(4))(CNMe)(3)(CO)(3) under 1 atm CO gives the deep pink tricarbonyl [Fe(2)(S(2)C(2)H(4))(CO)(3)(CNMe)(4)](PF(6))(2). DFT calculations show that a bridging CO or MeNC establishes a 3-center, 2-electron bond within the two Fe(II) centers, which would otherwise be nonbonding.     

Synthesis and characterization of reduced heme and heme/copper carbonmonoxy species

Carbon monoxide readily binds to heme and copper proteins, acting as a competitive inhibitor of dioxygen. As such, CO serves as a probe of protein metal active sites. In our ongoing efforts to mimic the active site of cytochrome c oxidase, reactivity toward carbon monoxide offers a unique opportunity to gain insight into the binding and spectroscopic characteristics of synthetic model compounds. In this paper, we report the synthesis and characterization of CO-adducts of ((5/6)L)Fe(II), [((5/6)L)Fe(II)...Cu(I)](B(C(6)F(5))(4)), and [(TMPA)Cu(I)(CH(3)CN)](B(C(6)F(5))(4)), where TMPA = tris(2-pyridylmethyl)amine and (5/6)L = a tetraarylporphyrinate tethered in either the 5-position ((5)L) or 6-position ((6)L) to a TMPA copper binding moiety. Reaction of ((5/6)L)Fe(II) [in THF (293 K): UV-vis 424 (Soret), 543-544 nm; (1)H NMR delta(pyrrole) 52-59 ppm (4 peaks); (2)H NMR (from ((5)L-d(8))Fe(II)) delta(pyrrole) 53.3, 54.5, 55.8, 56.4 ppm] with CO in solution at RT yielded ((5/6)L)Fe(II)-CO [in THF (293 K): UV-vis 413-414 (Soret), 532-533 nm; IR nu(CO)(Fe) 1976-1978 cm(-1); (1)H NMR delta(pyrrole) 8.8 ppm; (2)H NMR (from ((5)L-d(8))Fe(II)-CO) delta(pyrrole) 8.9 ppm; (13)C NMR delta((CO)Fe) 206.8-207.1 ppm (2 peaks)]. Experiments repeated in acetonitrile, acetone, toluene, and dichloromethane showed similar spectroscopic data. Binding of CO resulted in a change from five-coordinate, high-spin Fe(II) to six-coordinate, low-spin Fe(II), as evidenced by the upfield shift of the pyrrole resonances to the diamagnetic region ((1)H and (2)H NMR spectra). Addition of CO to [((5/6)L)Fe(II)...Cu(I)](B(C(6)F(5))(4)) [in THF (293 K): UV-vis ((6)L only) 424 (Soret), 546 nm; (1)H NMR delta(pyrrole) 54-59 ppm (multiple peaks); (2)H NMR (from [((5)L-d(8))Fe(II).Cu(I)](B(C(6)F(5))(4))) delta(pyrrole) 53.4 ppm (br)] gave the bis-carbonyl adduct [((5/6)L)Fe(II)-CO...Cu(I)-CO](B(C(6)F(5))(4)) [in THF (293 K): UV-vis ((6)L only) 413 (Soret), 532 nm; IR nu(CO)(Fe) 1971-1973 cm(-1), nu(CO)(Cu) 2091-2093 cm(-1), approximately 2070(sh) cm(-1); (1)H NMR delta(pyrrole) 8.7-8.9 ppm; (2)H NMR (from [((5)L-d(8))Fe(II)-CO...Cu(I)-CO](B(C(6)F(5))(4))) delta(pyrrole) 8.9 ppm; (13)C NMR delta((CO)Fe) 206.8-208.1 ppm (2 peaks), delta((CO)Cu) 172.4 ((5)L), 178.2 ((6)L) ppm]. Experiments in acetonitrile, acetone, and toluene exhibited spectral features similar to those reported. The [((5/6)L)Fe(II)-CO.Cu(I)-CO](B(C(6)F(5))(4)) compounds yielded (CO)(Fe) spectra analogous to those seen for ((5/6)L)Fe(II)-CO and (CO)(Cu) spectra similar to those seen for [(TMPA)Cu(I)-CO](B(C(6)F(5))(4)) [in THF (293 K): IR nu(CO)(Cu) 2091 cm(-1), approximately 2070(sh) cm(-1); (13)C NMR delta((CO)Cu) 180.3 ppm]. Additional IR studies were performed in which the [((5)L)Fe(II)-CO...Cu(I)-CO](B(C(6)F(5))(4)) in solution was bubbled with argon in an attempt to generate the iron-only mono-carbonyl [((5)L)Fe(II)-CO.Cu(I)](B(C(6)F(5))(4)) species; in coordinating solvent or with axial base present, decreases in characteristic IR-band intensities revealed complete loss of CO from copper and variable loss of CO from the heme.     

Prospects for Three-Electron Donor Boronyl (BO) Ligands and Dioxodiborene (B(2)O(2)) Ligands as Bridging Groups in Binuclear Iron Carbonyl Derivatives

Recent experimental work (2010) on (Cy(3)P)(2)Pt(BO)Br indicates that the oxygen atom of the boronyl (BO) ligand is more basic than that in the ubiquitous CO ligand. This suggests that bridging BO ligands in unsaturated binuclear metal carbonyl derivatives should readily function as three-electron donor bridging ligands involving both the oxygen and the boron atoms. In this connection, density functional theory shows that three of the four lowest energy singlet Fe(2)(BO)(2)(CO)(7) structures have such a bridging η(2)-μ-BO group as well as a formal Fe-Fe single bond. In addition, all four of the lowest energy singlet Fe(2)(BO)(2)(CO)(6) structures have two bridging η(2)-μ-BO groups and formal Fe-Fe single bonds. Other Fe(2)(BO)(2)(CO)(n) (n = 7, 6) structures are found in which the two BO groups have coupled to form a bridging dioxodiborene (B(2)O(2)) ligand with B-B bonding distances of ～1.84 ?. All of these Fe(2)(μ-B(2)O(2))(CO)(n) structures have long Fe···Fe distances indicating a lack of direct iron-iron bonding. One of the singlet Fe(2)(BO)(2)(CO)(7) structures has such a bridging dioxodiborene ligand with cis stereochemistry functioning as a six-electron donor to the pair of iron atoms. In addition, the lowest energy triplet structures for both Fe(2)(BO)(2)(CO)(7) and Fe(2)(BO)(2)(CO)(6) have bridging dioxodiborene ligands with trans stereochemistry functioning as a four-electron donor to the pair of iron atoms.     

FTIR studies of iron-carbonyl intermediates in allylic alcohol photoisomerization

The 532 or 355 nm laser-induced photoisomerization of allylic alcohols to aldehydes catalyzed by [Fe(3)(CO)(12)] or [Fe(CO)(4)PPh(3)] in hexane was investigated. The Fourier transform infrared (FTIR) absorption spectra of iron-carbonyl intermediate species such as [Fe(CO)(5)], [Fe(CO)(4)(R-C(3)H(4)OH)], and more importantly the pi-allyl iron-carbonyl hydride species [FeH(CO)(3)(R-C(3)H(3)OH)] (R=H, Me, Ph) were recorded during the catalytic process using [Fe(3)(CO)(12)] as the catalytic precursor. When [Fe(CO)(4)PPh(3)] was photolyzed with 355 nm, [FeH(CO)(3)(R-C(3)H(3)OH)] was also generated indicating the common occurrence of the species in these two systems. The pi-allyl hydride species is long believed to be a key intermediates and its detection here lends support to the pi-allyl mechanism of the photoisomerization of allyl alcohols.     

Controlled assembly of ruthenium complexes through ortho-carborane dithiolate and polysulfide ligands

Treatment of ortho-carborane, n-butyl lithium, sulfur, and [(p-cymene)RuCl(2)](2) in varying ratio led to four new compounds (p-cymene)Ru[S(3)(C(2)B(10)H(10))(2)] (3), [(p-cymene)Ru(2)(μ(2)-S(2)C(2)B(10)H(9))(μ(3)-S(2)C(2)B(10)H(10))](2) (4), [(p-cymene)Ru](2)Ru(μ(2)-η(2):η(2)-S(2)) (μ(2)-η(2):η(1)-S(2)Cl)(μ(2)-S(2)C(2)B(10)H(10))(2) (5), and [(p-cymene)Ru](2)Ru(μ(2)-η(1):η(1)-S(2))(μ(3)-η(2):η(2)-S(4)) (μ(2)-S(2)C(2)B(10)H(10))(2) (6), respectively. In 3, the ruthenium atom is coordinated by three S atoms from a in situ generated tridentate [S(3)(C(2)B(10)H(10))(2)](2-) ligand. 4 consists of two identical dinuclear (p-cymene)Ru(2)(μ(2)-S(2)C(2)B(10)H(9))(μ(3)-S(2)C(2)B(10)H(10)) subunits which connect to each other via the Ru-Ru bond and two bridging o-carborane-1,2-dithiolate ligands. In 4, a Ru-B bond is present. 5 contains a Ru(3)(μ(2)-S)(2)(μ(2)-S(2))(μ(2)-S(2)Cl) core, and the central ruthenium atom is coordinated by seven S atoms in a distorted pentagonal bipyramidal geometry. In 5, a S-Cl bond is generated. 6 has a novel Ru(3)(μ(2)-S)(2)(μ(2)-S(2))(μ(3)-S(4)) core, and the three ruthenium atoms are connected through the two terminal sulfur atoms of the S-S-S-S chain in a μ(3) binding fashion. All the four complexes have been characterized by elemental analysis, mass, NMR, and X-ray crystallography.