A general method for constructing optically active supramolecular assemblies from intrinsically achiral water-insoluble free-base porphyrins

We have developed a general method to construct optically active porphyrin supramolecular assemblies by using a simple air-water interfacial assembly process. The method involved the in situ diprotonation of the free-base porphyrins at the air-water interface and subsequent assembly under compression. We showed that two intrinsically achiral water-insoluble free-base porphyrin derivatives, 2,3,7,8,12,13,17,18-octaethyl-21H,23H-porphine (H(2)OEP) and 5,10,15,20-tetra-p-tolyl-21H,23H-porphine (H(2)TPPMe), could be diprotonated when spread onto a 2.4 M hydrochloric acid solution surface, and the Langmuir-Schaefer (LS) films fabricated from the subphase exhibited strong circular dichroism (CD) absorption, whereas those fabricated from pure Milli-Q water subphase did not. The experimental data suggested that the helical stacking of the achiral porphyrin building blocks was responsible for the supramolecular chirality of the assemblies. Interestingly, such a method was successfully applied to a series of other intrinsically achiral free-base porphyrins such as 5,10,15,20-tetrakis(4-methoxyphenyl)-21H,23H-porphine (H(2)TPPOMe), 5,10,15,20-tetraphenyl-21H,23H-porphine (H(2)TPP), 5,10,15,20-tetrakis(4-(allyloxy)phenyl)-21H,23H-porphine (H(2)TPPOA), and 5,10,15,20-tetrakis(3,5-dimethoxyphenyl)-21H,23H-porphine (H(2)TPPDOMe). A possible mechanism has been proposed. The method provides a facile way to obtain optically active porphyrin supramolecular assemblies by using intrinsically achiral water-insoluble free-base porphyrin derivatives.     

Investigation of free base, Mg, Sn, and Zn substituted porphyrin LB films as gas sensors for organic analytes

The visible absorption spectra of various substituted porphyrin compounds both in chloroform solution and as Langmuir-Blodgett (LB) solid-state films have been investigated. The porphyrin compounds examined were the Zn, Sn, Mg, and free base derivatives of 5,10,15,20-tetrakis[3,4-bis(2-ethylhexyloxy)phenyl]-21H,23H-porphine (EHO). Changes in the absorption spectra of these materials induced by their exposure to various organic compounds are reported with a view toward determining whether this is a useful approach toward an optical gas sensor.     

Effect of substituent position in coumarin derivatives on the interfacial assembly: reversible photodimerization and supramolecular chirality

The Langmuir and Langmuir-Schaefer (LS) films of two coumarin derivatives, 4-octadecyloxylcoumarin (4-CUMC18) and 7-octadecyloxylcoumarin (7-CUMC18), were newly synthesized, and their interfacial assemblies were investigated. Owing to the different substituent position of the long octadecyloxy chain in the coumarin parent, the two compounds showed completely different behaviors in the interfacial assemblies. When they were spread at the air/water interface, 7-CUMC18 formed a monolayer while 4-CUMC18 formed a multilayer film on the water surface. The spreading films on the water surface were transferred onto solid substrates by a Langmuir-Schaefer method, and the transferred films were characterized by UV-vis, Fourier transfer infrared, X-ray diffraction, circular dichroism, and atomic force microscopy spectra. Different packing of the molecules in the multilayer films was observed. While coumarin groups stacked in a face-to-face way in 7-CUMC18 film, they stacked in a head-to-tail manner in 4-CUMC18 film. Furthermore, distinct properties of the multilayer films were observed. It is revealed that a reversible [2+2] photodimerization and photocleavage could be induced in the LS film of 7-CUMC18 under photoirradiation with UV light of 365 and 254 nm, respectively. No photodimerization occurred in the 4-CUMC18 film. However, the film of 4-CUMC18 showed a supramolecular chirality although the compound itself is achiral.     

Self-assembled spiral nanoarchitecture and supramolecular chirality in Langmuir-Blodgett films of an achiral amphiphilic barbituric acid

An amphiphilic barbituric acid derivative was found to form stable monolayers showing a clear phase transition at the air/water interface. It is interesting to find that the deposited Langmuir-Blodgett (LB) films of the compound showed circular dichroism (CD) although the molecule itself was achiral. AFM measurements on the transferred one-layer LB film revealed that spiral nanoarchitectures were formed. It was further found that the supramolecular chirality of the LB films was related to symmetry breaking at the interface. Hydrogen bonding and the pi-pi stacking between the neighboring molecules resulted in chiral fibers which formed the spiral structures. To the best of our knowledge, this is the first report on the chirality of the molecular assemblies and spiral nanostructures formed through the air/water interface by achiral molecules.     

Aggregation and supramolecular chirality of achiral amphiphilic metalloporphyrins

Metalloporphyrin derivatives with three hydrophobic dodecyl chains and a hydrophilic ester or carboxylic acid substituent were designed in order to clarify the effect of the central metal ions on the aggregation as well as the supramolecular chirality in the Langmuir-Schaefer films. All the metalloporphyrins showed good spreading behavior on water surface and can be transferred onto solid substrates. The transferred films were characterized by a variety of methods including UV-visible spectroscopy, circular dichroism (CD) spectroscopy, FTIR spectroscopy, atomic force microscopy (AFM) and scanning electron microscope (SEM) measurements. It has been found that the copper derivative forms J-aggregates as well as H-aggregates in the film. Moreover, the film showed strong CD signals. Change from the ester substitution to carboxylic acid caused the decrease of the supramolecular chirality. On the contrary, the zinc derivative showed only a negligible CD signal although the corresponding free base could assemble into a chiral assembly. A possible mechanism for the subtle relationship between supramolecular chirality and molecular structures has been proposed.     

Role of the hydrophobic effect in the transfer of chirality from molecules to complex systems: from chiral surfactants to porphyrin/surfactant aggregates

The interaction between the achiral sulfonated porphyrin 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin, H 2TPPS 4 (4-), and two chiral cationic surfactants has been studied by optical absorption, fluorescence, and circular dichroism (CD) spectroscopies. At surfactant concentrations above the critical micellar concentration (cmc) the porphyrin is included in the micellar aggregates, but it is CD silent. Below the cmc at a definite porphyrin/surfactant stoichiometry the formation of heteroaggregates with transfer of chirality to the porphyrin chromophore occurs. The preferred surfactant/porphyrin stoichiometry is 3:1, which suggests a structure driven by electrostatic and hydrophobic interactions between porphyrin and surfactant and dipolar and ionic interactions with the water solution. At surfactant concentrations above the cmc, depending on the protocol of preparation of the samples, the formation of the two kinds of aggregates can be observed, reversible for the simple surfactant micelles incorporating the porphyrin, but irreversible for the heteroaggregates.     

Fabrication of chiral Langmuir-Schaefer films of achiral amphiphilic Schiff base derivatives through an interfacial organization

Supramolecular chirality in the Langmuir-Schaefer (LS) films of two achiral amphiphilic Schiff bases, 2-(2'-benzimidazolyliminomethyl)-4-octadecyloxyphenol (BSC18) and 2-(2'-benzthiazolyliminomethyl)-4-octadecyloxyphenol (TSC18), was investigated. Both of these amphiphiles could form LS films from the water surface or coordinate with Ag(I) in the subphase to form Ag(I)-coordinated LS films. Although both of these amphiphiles were achiral, TSC18 formed a chiral LS film from the water surface, while BSC18 formed a chiral Ag(I)-coordinated LS film from the aqueous AgNO3 subphase. The supramolecular chirality in these LS films was suggested to be due to a cooperative stereoregular pi-pi stacking of the functional groups together with the long alkyl chains in a helical sense. The relationship between the chirality of the LS films and the molecular structures of TSC18 and BSC18 as well as their H-bond or coordination behaviors was discussed. The Schiff base films showed a reversible color change upon exposure to HCl and NH3 gas alternatively; however, the supramolecular chirality was irreversible during these processes.     

Interfacial Molecular Assemblies of Metalloporphyrins with Two Trans or One Axial Ligands

Molecular assemblies of metalloporphyrins trans‐dichloro(5,10,15,20‐tetra‐p‐tolylporphyrinato)tin(IV) (SnCl2TPPMe) and trans‐dihydroxo(5,10,15,20‐tetra‐p‐tolylporphyrinato)tin(IV) (Sn(OH)2TPPMe), which have two trans axial ligands, as well 5,10,15,20‐tetrakis(4‐methoxyphenyl)‐21H,23H‐porphine iron(III) chloride (FeClTPPOMe) and 5,10,15,20‐tetraphenyl‐21H,23H‐porphine manganese(III) chloride (MnClTPP), which have one axial ligand, are interfacially organized by Langmuir and Langmuir–Blodgett (LB) techniques. SnCl2TPPMe and Sn(OH)2TPPMe form nanofibrous structures which can display distinct supramolecular chirality, although the molecular units themselves are achiral, while FeClTPPOMe and MnClTPP form irregular nanoparticles that display negligible supramolecular chirality. An interpretation in terms of the effects of the axial ligands is proposed for this interesting phenomenon. Moreover, compared with assemblies of the diprotonated free‐base porphyrins, which are fabricated by interfacial (air/2.4 M HCl) organization of free‐base porphyrin, those of SnCl2TPPMe and Sn(OH)2TPPMe display higher stability in terms of supramolecular chirality. These results indicate that the assembly properties of metalloporphyrins can essentially be affected by the axial ligands that are attached to their chromophores, and that stable chiral porphyrin supramolecular associations can be easily produced by using achiral metalloporphyrins bearing two trans axial ligands.     

Chiral conversion and memory of TPPS J-aggregates in complex micelles: PEG-b-PDMAEMA/TPPS

In the presence of tryptophan (Trp), complex micelles were prepared by 5,10,15,20-tetrakis(4-sulfonatophenyl) porphyrin (TPPS) and poly(ethylene glycol)-block-poly(2-(dimethylamino)ethyl methylacrylate) (PEG-b-PDMAEMA) in aqueous solutions at pH 1.8. Different mixing sequences led to different morphologies. Spheres and nanorods of small size were obtained in sequence I (P/Trp+TPPS) where TPPS was added into the mixed solution of PEG-b-PDMAEMA and Trp. More nanorods of larger length were achieved in sequence II (TPPS/Trp+P) where the copolymer was added as the last component. Two types of supramolecular chirality of TPPS aggregates caused by mixing sequences were investigated. In (P/Trp+TPPS), the circular dichroism (CD) signal of H-band was in line with the chirality of Trp while that of J-band exhibited an opposite signal (Chirality I). In (TPPS/Trp+P), chiral signals at both H- and J-bands followed that of Trp (Chirality II). The conversion between the two types of chirality can be accomplished by modulating the molar ratio of the repeating units on block PDMAEMA to TPPS, or a cycle of pH 1.8-5.5-1.8 processing on the micelle solution. In addition, the supramolecular chirality can be memorized via strong electrostatic interaction with achiral copolymer even after removal of the chiral template, but only Chirality II can be cyclically "switched-off-on".     

Interfacial assembly of cinnamoyl-terminated bolaamphiphiles through the air/water interface: headgroup-dependent assembly, supramolecular nanotube and photochemical sewing

A series of cinnamoyl-terminated bolaamphiphiles were synthesized and their assemblies at the air/water interface were investigated. It was found that the assembly behaviour depended on the substituted groups on the cinnamoyl unit. The bolaamphiphile with 4-hydroxycinnamoyl head groups (HCDA) was found to assemble into a supramolecular nanotube, while the others formed only layer-structured films. Moreover, the nanotube formed from HCDA showed supramolecular chirality due to the symmetry breaking. Both the layered films and the nanotubes showed photochemical dimerization upon UV irradiation, which were studied from the UV-Vis, FT-IR spectral and MALDI-TOF MS analysis. Interestingly, such dimerization behavior of the cinnamoyl group could be used to stabilize the nanotube of HCDAvia photochemical sewing. During such a process both the supramolecular chirality and the tubular shapes were kept. Remarkably, such a photochemical sewed chiral nanotube could further induce the chirality of an achiral porphyrin derivative assembled on it, and produced the induced chirality without using any chiral molecules.     

Porphyrin assemblies through the air/water interface: effect of hydrogen bond, thermal annealing, and amplification of supramolecular chirality

Molecular assemblies of two achiral porphyrins with different substituents, 5-(4-methoxycarbonylphenyl)-10,15,20-triphenyl-21H,23H-porphine (TPPCOOMe) and 5-(4-carboxyphenyl)-10,15,20-triphenyl-21H,23H-porphine (TPPCOOH), have been fabricated by the Langmuir-Blodgett (LB) technique. It is disclosed that although only slight differences exist in the molecular skeleton of these two compounds, their interfacial assemblies display distinct chiroptical properties. It is found that weak circular dichroism (CD) signals are observed from the TPPCOOH assemblies, while in the case of the TPPCOOMe assemblies, only negligible CD signals could be detected. Interestingly, after the assemblies are subjected to a thermal annealing treatment, TPPCOOH assemblies show a distinct amplification of CD signals, while those of TPPCOOMe do not. An explanation in terms of the effect of substituents on the spreading properties of the compounds and the effect of intermolecular hydrogen bonds on the cooperative stacking of the building blocks is proposed to explain these new findings. The investigation suggests that in the present porphyrin systems, besides a nice spreading property, the cooperative interaction of various noncovalent interactions, including hydrogen bonding, π-π stacking, and hydrophobic interactions, is essentially required for the occurrence of symmetry breaking at the air/water interface.     

Photobleaching of compounds of the 5,10,15,20-Tetrakis(m-hydroxyphenyl)porphyrin Series (m-THPP,m-THPC,and m-THPBC)

[reaction: see text] 5,10,15,20-Tetrakis(m-hydroxyphenyl)porphyrin (m-THPP) yielded novel quinonoid porphyrins upon irradiation in aqueous methanol. True photobleaching was observed for 5,10,15,20-tetrakis(m-hydroxyphenyl)chlorin (m-THPC) and 5,10,15,20-tetrakis(m-hydroxyphenyl)bacteriochlorin (m-THPBC) under the same conditions; several fragmentation products (imides, methyl p-hydroxybenzoate, dipyrrin derivatives) were recognized.     

Synthesis and supramolecular self-assembly study of a novel porphyrin molecule in Langmuir and Langmuir-Blodgett films

The self-assembly and supramolecular engineering of porphyrins into ordered arrays have recently attracted much interest because of their promising application potential in molecular and electronic devices, spintronics, energy harvesting and storage, catalysis, and sensor development. We herein report the synthesis and supramolecular self-assembly study of a novel porphyrin molecule, 2Por-TAZ, in Langmuir and Langmuir-Blodgett films. The 2Por-TAZ molecule contains two porphyrin macrocycles attached to a triaminotriazine headgroup. Triaminotriazines are known to form a highly ordered linear supramolecular self-assembly through complementary hydrogen bonding with barbituric acid molecules at the air-water interface. Surface pressure-area isotherm measurements and polarized UV-vis absorption spectroscopic studies indicate that the 2Por-TAZ molecules adopted an edge-on orientation at the air-water interface. Polarized UV-vis absorption study also revealed that the 2Por-TAZ molecules formed linear supramolecular networks on pure water and barbituric acid subphase with porphyrin flat planes facing toward the compression direction. The binding of barbituric acid with 2Por-TAZ molecules was observed from the expansion of the Langmuir monolayer film. Compared to the transferred LB film from pure water subphase, both the UV-vis absorbance and fluorescence emission intensity of the LB film transferred from barbituric acid subphase increased significantly.     

Reversing the Handedness of Self‐Assembled Porous Molecular Networks through the Number of Identical Chiral Centres

Scanning tunnelling microscope observations at the 1‐phenyloctane/graphite interface reveal how chiral structural information at the molecular level is transferred and expressed structurally at the 2D supramolecular level for a porous system. The chirality of self‐assembled molecular networks formed by chiral dehydrobenzo[12]annulene (cDBA) derivatives having three chiral chains and three achiral chains, alternatingly, is compared with those of cDBAs having six chiral chains reported previously. While for all cDBAs homochiral surfaces are formed, their handedness is not simply a reflection of the absolute configuration of the stereogenic centres. Both the number of stereogenic centres as well as the length of the achiral chains determine the supramolecular handedness, providing a deep insight into the supramolecular chirality induction mechanisms at play. Moreover, these cDBAs act to induce chirality in porous networks formed by achiral DBAs.     

Regulation of supramolecular chirality and morphology of the LB film of achiral barbituric acid by amphiphilic matrix molecules

Previously, we have found that an achiral barbituric acid (BA) derivative, 5-(4-(N-methyl-N-hexadecylaminobenzylidene))-2,4,6-(1H,3H)-pyrimidinetrione (BAC16), could form molecular assemblies showing supramolecular chirality through the organization at the air/water interface. To acquire more knowledge of the formation mechanism of such supramolecular assemblies, some achiral molecules, such as stearic acid (SA), octadecylamine (ODA), and an analogue of BA without an alkyl chain, were mixed into the BAC16 system. The effects of these matrix molecules on the supramolecular chirality and surface morphologies of Lanmuir-Blodgett (LB) films were investigated. It was observed that, at a low molar ratio of the matrix molecules (below 10%), the chirality of the BAC16 assemblies could be maintained with only a reduction in the intensity. When the matrix fraction was increased, the supramolecular chirality of the mixed films disappeared. The addition of the matrix molecules can greatly change the surface morphologies of the mixed films. When SA was mixed with BAC16, the spiral nanofibers of BAC16 were changed to long nanofibers. When ODA was mixed, the hydrolytic cleavage reaction of BAC16 took place at the air/water interface and disordered spirals were obtained. When the analogous BA derivate without an alkyl chain was mixed, the phase-separating morphology was observed. These changes in the chirality and surface morphologies indicated firmly that the supramolecular chirality of BAC16 films were formed due to the cooperative arrangement of the molecules. A certain amount of matrix molecules will destroy the cooperative arrangement and thus the chirality.     

Supramolecular chirogenesis in bis(zinc porphyrin): An absolute configuration probe highly sensitive to guest structure

The role of the ligand's structure and absolute configuration in the supramolecular chirality induction in achiral bis(zinc porphyrin) has been studied. The amines with bulkier substituents resulted in stronger CD signals due to increased helical displacement in the anti conformer. All the amines with an R absolute configuration gave a negative first Cotton effect and positive second Cotton effect, while the ligands with an S absolute configuration produced CD signals with opposite signs due to formation of the left- and right-handed screw diastereomers, respectively.     

Langmuir-Blodgett films and chiroptical switch of an azobenzene-containing dendron regulated by the in situ host-guest reaction at the air/water interface

An amphiphilic dendron containing an azobenzene ring at the focal point and the l-glutamate peripheral groups was designed. Its monolayer formation and host-guest reaction with cyclodextrins at the air/water interface and the properties of the transferred Langmuir-Blodgett (LB) films were investigated. The individual dendron, although without any long alkyl chains, could still form a stable monolayer at the air/water interface because of the good balance between hydrophilic and hydrophobic parts within the molecule. When cyclodextrin (CyD) was added to the subphase, a host-guest reaction occurred in situ at the air/water interface. The inclusion of the focal azobenzene moiety into the cavity of cyclodextrin decreased the packing of the aromatic ring and also led to the diminishment of the molecular area. Both the films formed at the surface of pure water and aqueous cyclodextrins were transferred onto solid substrates. Nanofiber structures were obtained for the film from the water surface as a result of the packing of the azobenzene groups, and circular domains were obtained for the film transferred from the aqueous CyD phases. The film transferred from the water surface showed an exciton couplet in the absorption band of azobenzene, whereas a negative Cotton effect was obtained for the film from CyD subphases. It was found that the supramolecular chirality in the LB film transferred from water was due to the transfer of the molecular chirality to the assemblies whereas that from the CyD subphase was due to the inclusion of azobenzene into the chiral cavity. Interestingly, the film from the water surface was photoinactive, whereas a reversible optical and chiroptical switch could be obtained for the film from the α-CyD subphase. The work provided a way to regulate the assembly and functions of organized molecular films by taking advantage of the interfacial host-guest reaction.     

Supramolecular chirality from an achiral azobenzene derivative through the interfacial assembly: effect of the configuration of azobenzene unit

The Langmuir-Schaefer (LS) films of an achiral azobenzene derivative, 4-octyl-4'-(5-carboxypentamethyleneoxy) azobenzene (C8AzoC5), were fabricated and their optical activities were investigated. It was found that the LS film of the trans-C8AzoC5 showed strong Cotton effect, while that of cis-C8AzoC5 did not. The characterization of the LS films by UV-vis, Fourier transform infrared (FT-IR) spectra, and X-ray diffraction (XRD) revealed that this interesting phenomenon was due to the different packing of the azobenzene unit in the LS film. The planar conjugated trans-azobenzene favored ordered cooperative packing in a helical sense and produced the supramolecular chirality, while the cis-isomer did not due to the bulky twisted configuration.     

Interfacial assembly of an achiral zinc phthalocyanine at the air/water interface: a surface pressure dependent aggregation and supramolecular chirality

The aggregation and supramolecular chirality of the interfacial assemblies of an achiral phthalcyanine derivative, zinc 2,3,9,10,16,17,23,24-octakis(octyloxy)-29 H,31 H-phthaloxyanine (ZnPc), were investigated, and a surface pressure dependent behavior was observed. It was found that ZnPc could be spread as a Langmuir film on water surface and transferred onto solid substrates by the horizontal lifting method. The compound formed mixed J- and H-aggregates in the transferred Langmuir-Blodgett (LB) films. Deconvolution of the broaden Q-band revealed three main components of the spectra, which corresponded to H- and J-aggregates and medium transition aggregates, whose relative contents could be modulated by the surface pressure at which the films were transferred. On the other hand, the transferred LB films composed of these aggregates showed Cotton effects in circular dichroism spectra when the floating film was compressed over a certain surface pressure although the compound itself was achiral. The cooperative arrangement of the macrocylic ring in a helical manner through the interfacial organization was suggested to be responsible for such optical activity in the LB films. A possible explanation based on the cooperative arrangement of the ZnPc building blocks in a helical sense stacking in the aggregates was proposed.     

Electrochemical control of the structure of two-dimensional supramolecular organization consisting of phthalocyanine and porphyrin on a gold single-crystal surface

Two-component adlayers consisting of cobalt(II) phthalocyanine (CoPc) and a metalloporphyrin such as 5,10,15,20-tetraphenyl-21H,23H-porphine copper(II) (CuTPP), 2,3,7,8,12,13,17,18-octaethyl-21H,23H-porphine copper(II) (CuOEP), or 5,10,15,20-tetraphenyl-21H,23H-porphine cobalt(II) (CoTPP) were prepared by immersing either an Au(111) or Au(100) substrate in a benzene solution containing those molecules. The mixed adlayers thus prepared were investigated in 0.1 M HClO4 by cyclic voltammetry (CV) and in situ scanning tunneling microscopy (STM). The composition of the mixed adlayer consisting of CoPc and CuTPP molecules was found to vary with immersion time. CoPc molecules displaced CuTPP molecules during the modification process with increasing immersion time, and the CuTPP molecules were completely displaced by CoPc molecules in the mixed solution after a prolonged modification time, during which the underlying Au(100) substrate underwent phase transition from the reconstructed (hex) lattice to the unreconstructed (1 x 1) lattice. The two-component adlayer of CoPc and CuTPP was found to form a supramolecular adlayer with the constituent molecules arranged alternately on Au(100)-(hex). The striped structure was stable on Au(100)-(hex) at or near the open circuit potential (OCP), whereas the mixed adlayer was disordered on Au(100)-(1 x 1) at potentials more positive than OCP, where the phase transition of the arrangement of underlying Au atoms (i.e., the lifting of reconstruction) was induced electrochemically. A similar two-component supramolecular adlayer consisting of CoPc and CuTPP was formed on Au(111). A highly ordered, compositionally disordered adlayer of CoTPP and CuTPP was formed on Au(100)-(hex), suggesting that the adlayer structure is independent of the coordinated central metal ion for the formation of supramolecular nanostructures composed of those molecules. A supramolecular organization of CoPc and CuOEP was also found on Au(111). The surface mobility and the molecular reorganization of CoPc and CuOEP on Au(111) were tuned by modulation of the electrode potential. It is concluded that molecular assemblies of the two-component structure consisting of phthalocyanine and porphyrin were controlled not only by the crystallographic orientation of Au but also by the modulation of electrochemical potential.