共查询到20条相似文献,搜索用时 78 毫秒
1.
以聚苯乙烯-二乙烯苯接枝磷钨酸季铵盐为三相相转移催化剂,以H2O2为氧化剂,KCl为助催化剂,研究了环戊烯(CPE)合成环氧环戊烷(CPEO)的无溶剂工艺。 讨论了催化剂和助催化剂用量、反应温度、反应时间、环戊烯与H2O2摩尔比对反应的影响。 确定了无溶剂环氧环戊烷合成反应的条件为(以0.056 mol H2O2计):催化剂1.0 g、助催化剂0.025 g、反应温度40 ℃、反应时间5 h、n(CPE)∶n(H2O2)=2.1∶1.0。 CPEO的平均收率约为96%。 催化剂回收重复使用6次活性无明显降低。 相似文献
2.
3.
4.
5.
钛钨改性HMS的合成及催化氧化苯甲醇合成苯甲醛 总被引:4,自引:0,他引:4
通过改变硅钛摩尔比和硅钨摩尔比合成了Ti-HMS和Ti/W-HMS型分子筛,并进行了NH3-TPD测试分析. 结果表明,当n(Si)∶ n(Ti)=30∶ 1、n(Si)∶ n(W)=400∶ 1时,分子筛的酸量最大. 利用上述不同HMS为催化剂,ω(H2O2)=30%的H2O2水溶液为氧化剂,在无有机溶剂及相转移催化剂条件下,氧化苯甲醇制备苯甲醛. 结果表明,Ti/W-HMS可选择性氧化苯甲醇制备苯甲醛;催化剂的酸量和酸强度越大,越有利于提高催化活性和选择性. 利用Ti(30)/W(400)-HMS为催化剂,当n(醇)∶ n(H2O2)=1∶ 2、ω(催化剂)=4%、反应时间为5 h时,苯甲醇的转化率和苯甲醛的选择性分别为72.6%、96.9%. 催化剂重复使用4次后,苯甲醇的转化率和苯甲醛的选择性分别为63.2%、89.1%. 相似文献
6.
无溶剂条件下反应控制相转移催化氯丙烯氧化制环氧氯丙烷 总被引:1,自引:1,他引:0
系统地研究了无溶剂条件下,H2O2为氧源,反应控制相转移催化剂[(C16H33(70%)+C18H37(30%))N(CH3)3]3[PW4O16]催化氯丙烯环氧化制环氧氯丙烷反应.结果表明,在氯丙烯/H2O2/催化剂(摩尔比)=400∶100∶1条件下,50~55℃反应3 h,环氧氯丙烷的收率为85~87%.在NaH2PO4存在下,催化剂循环使用5次,活性无明显降低,新鲜催化剂和回收催化剂的31P MAS NMR谱分析结果表明NaH2PO4对催化剂结构和组成具有稳定作用. 相似文献
7.
有机-无机杂化钨(钼)过氧配合物催化合成己二酸 总被引:1,自引:0,他引:1
以1,10-菲啰啉(Phen)作N,N配体制备了双核同多钨(钼)杂化过氧配合物H2M2O3(O2)4.2Phen(M:W、Mo),为己二酸的绿色合成提供了一类双功能催化剂。通过元素分析、重量法、化学滴定法、TG/DSC、IR和UV-Vis测试技术对其组成和结构进行了表征。在不使用有机溶剂和相转移催化剂的条件下,考察了它们催化30%的H2O2氧化环己烯、环己醇和环己酮合成己二酸的催化活性。实验结果表明,钨过氧配合物的催化活性较好,钼过氧配合物的催化活性差;以H2W2O3(O2)4.2Phen.H2O作催化剂,反应条件为n(底物)∶n(催化剂)∶n(H2O2)=100∶1.2∶440,反应温度为90℃,反应12 h,从环己烯、环己醇和环己酮到己二酸的收率分别为89.9%、53.5%和64.8%。 相似文献
8.
气固相法合成的Ti—ZSM—5催化剂上苯乙烯氧化应的宏观动力学 总被引:2,自引:0,他引:2
采用TiCl4气固相同晶取代法制得的Ti-ZSM-5作催化剂,对H2O2氧化苯乙烯反应的宏观动力学进行了研究,考察了催化剂、苯乙烯和H2O2用量及反应温度对苯乙烯氧化反应速率的影响。结果表明,催化剂Ti-ZSM-5和底物苯乙烯对苯乙烯氧化反应速率的贡献均为一级,而H2O2为1/2级;苯乙烯氧化反应的表观活化能Ea=48.14kJ/mol。当以丙酮为溶剂,在n(PhCH:CH2)/n(H2O2)=7.91,催化剂用量为20g/L,反应温度为343K的条件下,反应360min时,苯乙醛选择性和H2O2利用率分别可达91.9%和88.6%。 相似文献
9.
聚苯乙烯负载席夫碱Mo(Ⅵ)配合物合成、表征及其在环己烯环氧化反应中的催化活性 总被引:3,自引:0,他引:3
合成了聚苯乙烯负载乙二胺缩水杨醛席夫碱与Mo(Ⅵ)的配合物,并对其结构进行了表征.该配合物催化环己烯环氧化反应与小分子配合物MoO2(acac)2相比,具有更优良的催化活性和选择性;建立了催化剂中Mo分析和环氧环己烷气相色谱分析新方法;探讨了配合物及环氧环己烷合成过程诸因素的影响;优化了环氧环己烷合成条件,即以n(t-BuOOH)=0.1mol计,n(C6H10)∶n(t-BuOOH)=3∶1,溶剂5mL,反应温度80℃,时间60min.在该条件下,环氧环己烷收率(以t-BuOOH计)99.2%以上,质量分数约99.5%(GC检测).催化剂循环使用5次后,未见活性明显下降,环氧环己烷收率(以t-BuOOH计)仍接近99%. 相似文献
10.
以钨酸钠、磷酸、过氧化氢H2O2和氯代十六烷基吡啶为原料制备了磷钨杂多酸季铵盐相转移催化剂.实验发现,采用乙酸乙酯溶解氯代十六烷基吡啶制备的催化剂呈颗粒状析出于油水界面,简单过滤即可分离.该催化剂与H2O2作用体系呈均相,反应速率显著加快.H2O2耗尽并降温后,催化剂以固体颗粒形式沉淀,回收率达90%,重复使用六次活性基本不变.采用FT-IR表征了反应前后催化剂结构的变化.以二氯乙烷为溶剂考察了反应条件对脂肪酸甲酯环氧化反应和H2O2利用率的影响.实验结果表明,在反应时间2.5h,催化剂0.3g,分步加入30%H2O23.5g(30.88mmol),反应温度65℃,二氯乙烷20mL,脂肪酸甲酯5.0g(双键22.84mmol)时,产品环氧值可达5.78%,双键环氧化选择性81.9%,H2O2利用率达86%. 相似文献
11.
用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%. 相似文献
12.
Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction
Laurent Gavara Thomas Boisse Jean-Pierre Hénichart Adam Daïch Philippe Gautret 《Tetrahedron》2010,66(38):7544-5571
In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments. 相似文献
13.
The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula. 相似文献
14.
Rebecca J. Burton Mandy L. CrowtherNeal J. Fazakerley Shaun M. FilleryBarry M. Hayter Jason G. KettleCaroline A. McMillan Paula PerkinsPeter Robins Peter M. SmithEmma J. Williams Gail L. Wrigley 《Tetrahedron letters》2013
The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines. 相似文献
15.
KMnO4-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields. 相似文献
16.
N. A. Nedolya 《Chemistry of Heterocyclic Compounds》2008,44(10):1165-1219
The review contains a concise historical account and information on the most significant researches undertaken by the staff
at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry
of Heterocyclic Compounds.
Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee.
Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008. 相似文献
17.
Regiospecific and direct imidation of the methyl C(sp3)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products. 相似文献
18.
19.
《Tetrahedron》2014,70(21):3377-3384
The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative. 相似文献
20.
Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields. 相似文献