潜手性Schiff碱不对称催化还原反应研究进展

对近年来潜手性Schiff碱的不对称催化氢化的发展状况按照均相、非均相及氢转移催化氢化三种类型进行了较为详尽的综述.     

Asymmetric hydrogenations for the synthesis of Boc-protected 4-alkylprolinols and prolines

The utility of 4-substituted prolinols and their corresponding prolines in peptides, peptidomimetics, and natural products has motivated researchers to find new and efficient routes for their preparation. Herein, we report a general approach to the synthesis of Boc-protected 4-alkylprolinols and prolines via a divergent asymmetric hydrogenation strategy. Intermediate exocyclic olefins were prepared by Wittig-type reactions with ketone 6 and subjected to hydroxyl and sterically directed reductions. The Crabtree catalyst (Ir[COD]PyPCy(3)PF(6)) proved to be highly effective in diastereoselective hydrogenations to give trans-substituted pyrrolidines (9). Good facial selectivities were also observed in heterogeneous hydrogenations with Raney-nickel to obtain cis-substituted pyrrolidines (11). Employing this strategy, we describe the synthesis of novel prolinol and proline-based building blocks for incorporation into biologically relevant peptidomimetics.     

Kinetic evaluation of polyol production by three-phase catalytic hydrogenation of saccharides

Kinetic evaluations were accomplished in a discontinuous three-phase reactor for saccharose, glucose and fructose hydrogenations at 373, 393 and 413 K, and 24 atm. Selectivities attained values in the order of 99.05%. Langmuir-Hinshelwood models based on heterogeneous mechanisms were proposed and the optimization and kinetic quantification of the process were performed.This revised version was published online in December 2005 with corrections to the Cover Date.     

Applications of Heterogeneous Catalytic Processes to the Environmentally Friendly Synthesis of Fine Chemicals

The progresses made at SK Corporation in the development of heterogeneous catalysts for the production of fine chemicals are reported in this paper. Although main focus is brought into various hydrogenations, other reactions such as epoxidation, decarboxylation, and ring conversion are also described in detail.     

Detection of Catalytic Activity in Combinatorial Libraries of Heterogeneous Catalysts by IR Thermography

Only about 200 μg of catalyst are required to identify the catalytically active materials on a combinatorial library of heterogeneous catalysts by IR thermography. The procedure is highly sensitive, and temperature differences arising from catalytic activity of hydrogenations and oxidations have been reliably detected down to 0.1 K.     

Rate and Stereoselectivity Changes During Hydrogenation of n-Heterocycles

High diastereoselectivities were obtained in the heterogeneous catalytic hydrogenation of chiral pyrrole and pyridine derivatives with complete conversion, in non-acidic medium. The products of the hydrogenations, secondary and tertiary amines act as catalyst modifiers, increasing the d.e. values in the last period of the reactions.     

Resolution of an iridoid synthon, gastrolactol, by means of dynamic acetylation and lipase-catalyzed alcoholysis

A short synthetic route to asymmetric iridoids was developed. The three key steps were an intramolecular [4 + 2] cycloaddition reaction of an enamine derivative of 8-oxocitral (2), a dynamic acetylation, and an enzymatic resolution of the gastrolactyl acetates 5a and 5b, iridoids with three stereocenters. Some regio- and stereoselective heterogeneous catalytic hydrogenations of double bonds in iridoid aglucones were discussed.     

Co-immobilization of transition-metal complexes and ionic liquids in a polymeric support for liquid-phase hydrogenations

A new recyclable heterogeneous system is reported for reactions with a transition-metal catalyst in ionic liquid medium. It consists of a polymeric phase in which both the ionic liquid and the transition-metal catalyst are incorporated. The system is readily prepared by simple mixing of the components. In hydrogenations, the polymeric system always outperformed the ‘classical’ biphasic systems with ionic liquids and it could be re-used successfully without loss of activity.     

A general method for the rapid reduction of alkenes and alkynes using sodium borohydride, acetic acid, and palladium

Alkenes and alkynes are rapidly reduced to the corresponding alkanes using sodium borohydride and acetic acid in the presence of a small amount of palladium catalyst. The heterogeneous reaction is conducted in open air at room temperature. Reactions typically afford conversions to the alkane product of 98% or more within 15 min. The best solvent system was determined to be isopropyl alcohol, though reduction also takes place in solvents such as tetrahydrofuran, chloroform and, with some substrates, even in water. The method described is a convenient alternative to hydrogenations that require an external supply of hydrogen gas.     

Hydrogen production on iron–magnesium oxide in the high-temperature water-gas shift reaction

The effect of the structure of the achiral primary amine additive on the enantioselective heterogeneous catalytic hydrogenation of (E)-2-methyl-2-butenoic acid over cinchonidine modified Pd/Al₂O₃ was studied. It was found that a variety of amines increase the enantioselectivity, which was always accompanied by decrease in the initial rate of the hydrogenations. Based on these results, the participation of the amine additive in the formation of the intermediate complex responsible for enantioselection was suggested. A decrease in the reaction temperature resulted in further increase in the optical purity of the product up to 67%, the highest value reported in the hydrogenation of unsaturated aliphatic acids in this heterogeneous catalytic system so far.     

Competitive hydrogenation in binary diene systems on a palladium catalyst

Summary Hydrogenations of individual C₅ dienic substrates (1,3-cyclopentadiene, isoprene, 1,4-pentadiene, cis-1,3-pentadiene, trans-1,3-pentadiene) and their binary mixtures on a heterogeneous palladium catalyst were studied in cyclohexane at 25°C and 2 MPa. Selectivities of the competitive hydrogenations were determined and the substrates relative adsorption coefficients calculated. Effects of the diene structure on their reactivity and the stability of the surface complex are discussed. It was found that differences in selectivity of the competitive hydrogenations of C₅ dienes are caused by the difference both in adsorptivity values and in reactivity of adsorbed molecules. The presence of a five-membered ring in the C₅ dienes leads, , in significant reduction of surface complex stability as compared with acyclic structures of C₅ dienes. On the other hand, it has a very positive effect on the rate of surface reaction.     

One-pot synthesis of recyclable palladium catalysts for hydrogenations and carbon-carbon coupling reactions

Palladium nanoparticles were generated from tetrakis(triphenylphophine)palladium in a mixture of tetra(ethylene glycol) and tetramethoxysilane (or titanium(IV) isopropoxide), then encapsulated in silica matrix (or titania matrix) by the treatment with water. The resulting heterogeneous material showed high catalytic activity in the hydrogenations of various alkene and alkynes and in the carbon-carbon cross-coupling reactions such as the Suzuki-Miyaura, the Sonogashira, the Heck-Mizoroki, and the Stille reactions.     

Asymmetric hydrogenation approaches to valuable, acyclic 1,3-hydroxymethyl chirons

An iridium carbene oxazoline complex was used to catalyze hydrogenations of trisubstituted alkenes to give terminal and internal 1,3-hydroxymethyl chirons. The products are accessible in all possible stereoisomeric forms. These hydrogenations do not require strongly coordinating functionalities on the substrate, and in some key cases, catalyst- rather than substrate-controlled stereoselectivities are observed. It is hypothesized that these reactions would not be feasible using iridium or rhodium diphosphine complexes.     

Heterogeneous Catalysis and Parahydrogen-Induced Polarization

Parahydrogen-induced polarization with heterogeneous catalysts (HET-PHIP) has been a subject of extensive research in the last decade since its first observation in 2007. While NMR signal enhancements obtained with such catalysts are currently below those achieved with transition metal complexes in homogeneous hydrogenations in solution, this relatively new field demonstrates major prospects for a broad range of advanced fundamental and practical applications, from providing catalyst-free hyperpolarized fluids for biomedical magnetic resonance imaging (MRI) to exploring mechanisms of industrially important heterogeneous catalytic processes. This review covers the evolution of the heterogeneous catalysts used for PHIP observation, from metal complexes immobilized on solid supports to bulk metals and single-atom catalysts and discusses the general visions for maximizing the obtained NMR signal enhancements using HET-PHIP. Various practical applications of HET-PHIP, both for catalytic studies and for potential production of hyperpolarized contrast agents for MRI, are described.     

Enantioselective hydrogenations of arylalkenes mediated by [Ir(cod) (JM-Phos) ]+ complexes

Phosphine oxazoline ligands la-j were converted to the corresponding [Ir(cod)(phosphine oxazoline)]+ complexes 2a-j. X-ray diffraction analyses of complexes 2b, 2h, 2i, and 2j were performed. The tert-butyl-, 1,1-diphenylethyl-, and phenyl-oxazoline complexes (2b, 2h, and 2i, respectively) had typical square planar metal environments with chair-like metallocyclic rings. However, the 3,5-di-tert-butylphenyl oxazoline complex 2j was distorted toward a tetrahedral metal geometry. This library of complexes was tested in asymmetric hydrogenations of several arylalkenes. High enantioselectivities and conversions were observed for some substrates. A possible special role for the HPh2C-oxazoline substituent in asymmetric hydrogenations was identified and is discussed. In attempts to rationalize why high enantioselectivities were not observed for some alkenes, a series of deuterium labeling experiments were performed to probe for competing reactions that occurred prior to the hydrogenation step. Double bond migrations were inferred for several substrates, and this is a significant complication in asymmetric hydrogenations of arylalkenes that had not been discussed prior to this study. A mechanistic rationale is proposed involving competing double bond migration for some but not all substrates. Appreciation of this complication will be valuable in further studies aimed at optimization of enantioselection in asymmetric hydrogenations of unfunctionalized alkenes.     

Inductive heating with magnetic materials inside flow reactors

Superparamagnetic nanoparticles coated with silica gel or alternatively steel beads are new fixed-bed materials for flow reactors that efficiently heat reaction mixtures in an inductive field under flow conditions. The scope and limitations of these novel heating materials are investigated in comparison with conventional and microwave heating. The results suggest that inductive heating can be compared to microwave heating with respect to rate acceleration. It is also demonstrated that a very large diversity of different reactions can be performed under flow conditions by using inductively heated flow reactors. These include transfer hydrogenations, heterocyclic condensations, pericyclic reactions, organometallic reactions, multicomponent reactions, reductive cyclizations, homogeneous and heterogeneous transition-metal catalysis. Silica-coated iron oxide nanoparticles are stable under many chemical conditions and the silica shell could be utilized for further functionalization with Pd nanoparticles, rendering catalytically active heatable iron oxide particles.     

Yolk-Shell Nanocrystal@ZIF-8 Nanostructures for Gas-Phase Heterogeneous Catalysis with Selectivity Control

A general synthetic strategy for yolk-shell nanocrystal@ZIF-8 nanostructures has been developed. The yolk-shell nanostructures possess the functions of nanoparticle cores, microporous shells, and a cavity in between, which offer great potential in heterogeneous catalysis. The synthetic strategy involved first coating the nanocrystal cores with a layer of Cu(2)O as the sacrificial template and then a layer of polycrystalline ZIF-8. The clean Cu(2)O surface assists in the formation of the ZIF-8 coating layer and is etched off spontaneously and simultaneously during this process. The yolk-shell nanostructures were characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction, and nitrogen adsorption. To study the catalytic behavior, hydrogenations of ethylene, cyclohexene, and cyclooctene as model reactions were carried out over the Pd@ZIF-8 catalysts. The microporous ZIF-8 shell provides excellent molecular-size selectivity. The results show high activity for the ethylene and cyclohexene hydrogenations but not in the cyclooctene hydrogenation. Different activation energies for cyclohexene hydrogenation were obtained for nanostructures with and without the cavity in between the core and the shell. This demonstrates the importance of controlling the cavity because of its influence on the catalysis.     

Notes on selectivity aspects in sorbic acid and sorbic alcohol hydrogenation

Sorbic acid and sorbic alcohol hydrogenations to the cis-hex-3-enoic acid or cis-hex-3-en-1-ol were carried out at the same conditions in three different systems—homogeneous, two-phase and heterogeneous. The complex [Cp*Ru(sorbic acid)]CF₃SO₃ was used as a catalyst. Selectivity and reactivity of both the compounds varied significantly. Using sorbic acid as a hydrogenation substrate by-products were the other izomers of hexenoic acid and hexanoic acid, with sorbic alcohol as a hydrogenation substrate by-products were aldehydes and hemiacetals.     

Catalysis by metal nanoparticles embedded on metal-organic frameworks

The present review describes the use of metal-organic frameworks (MOFs) as porous matrices to embed metal nanoparticles (MNPs) and occasionally metal oxide clusters, which are subsequently used as heterogeneous catalysts. The review is organized according to the embedded metal including Pd, Au, Ru, Cu, Pt, Ni and Ag. Emphasis is also given in the various methodologies reported for the formation of the NPs and the characterization techniques. The reactions described with this type of solid catalysts include condensation, hydrogenations, carbon-carbon coupling, alcohol oxidations and methanol synthesis among others. Remaining issues in this field have also been indicated.     

Selective alkylation and Suzuki coupling as an efficient strategy for introducing functional anchors to the ethylene-bis(indenyl) ligand

Chiral ansa-ethylene-bis(indenyl)-metal complexes, EBI-MX₂, are useful pre-catalysts for a wide variety of reactions, including hydrogenations, hydrosilylations, and polymerization reactions. In order to immobilize these complexes onto heterogeneous supports, a new methodology was developed to introduce functional anchors to the ethylene-bis(indenyl) ligand, EBI. This was accomplished by selective alkylation of indene to form toluene-4-sulfonic acid 2-(3H-inden-1-yl)-ethyl ester, which was then used to alkylate 6-bromoindene. The selective introduction of an aryl bromide then undergoes coupling reactions with aryl borates via the Suzuki coupling to efficiently introduce an alkenyl or alcohol, functional anchor in a simple four step synthesis.