Passively mode-locked Nd:GGG laser with a semiconductor saturable absorber mirror

The mode-locking operation of the Nd:GGG crystal with a semiconductor saturable absorber mirror (SESAM) was demonstrated. Continuous wave (CW) mode-locking was obtained with the pulse duration of 11 ps and the pulse repetition rate of 40.38 MHz. At 7 W of pump power, the maximum average output power of 1.1 W was obtained with the slope efficiency of 18.1%.     

Diode-pumped femtosecond Yb:CaNb2O6 laser

We report to our knowledge a diode-pumped passively mode-locked Yb:CaNb(2)O(6) (Yb:CN) laser for the first time. Both CW and passive mode-locking operation of the laser are experimentally investigated. A maximum CW output power of 1.4 W with a slope efficiency of 20% is obtained on a 7 mm long 1.5 at.% Yb:CN crystal, while stable passive mode-locking with a commercial semiconductor saturable absorption mirror (SESAM) was achieved on a 3 mm long 3 at.% Yb:CN crystal. The mode-locked pulses have pulse width of 251 fs and an average output power of 44 mW at 1038 nm.     

Diode-pumped passively mode-locked sub-picosecond Yb:LuAG ceramic laser

In this paper the laser activities of a diode-pumped Yb:LuAG ceramic which was prepared by the solid-state reactive sintering method were reported. The maximum output power was 1.86 W in the continuous wave(CW) laser operation,corresponding to a slope efficiency of 53.6%. The CW laser could be tuned from 1030 to 1096 nm by inserting a prism in the cavity. With the assist of a semiconductor saturable absorber mirror(SESAM), passive mode-locking was realized,delivering sub-picosecond pulses with 933 fs duration and an average power of 532 m W at a repetition rate of 90.35 MHz.     

Single output LD end-pumped passively mode-locked Nd:YVO4 laser with semiconductor saturable absorber mirror

A quarter-wave plate and the thin film polarizer(TFP) are used for the LD end-pumped passively mode-locked Nd:YVO4 laser with semiconductor saturable absorber mirror(SESAM) to obtain a single beam output with a total power of 4.8 W.An optical-optical efficiency is achieved to be 24% for a stable CW mode-locking operation at 1064 nm,with a pulse repetition rate of 70 MHz and pulse width of 16 ps.The multipulse in the pulse sequence is eliminated for reaching a peak power as high as 4 kW.     

半导体可饱和吸收镜被动锁模侧面抽运Nd:YAG激光器研究

利用半导体可饱和吸收镜(SESAM)锁模技术实现的超快脉冲激光器具有结构简单紧凑、脉冲序列稳定等优势,在许多领域有着重要用途,自问世以来受到国内外的广泛关注.分析了SESAM被动锁模侧面抽运固体激光器的具体要求,进行了不同条件下的SESAM被动锁模侧面抽运Nd:YAG激光器实验.获得了最高平均功率9.5 W,脉冲重复频率71 MHz,单脉冲能量约141 nJ的皮秒激光脉冲.对SESAM被动锁模侧面抽运Nd:YAG激光器进行了实验和理论分析,对实现高功率连续超短脉冲激光器进行了探讨.     

Single-passed passively mode-locked Nd:YVO<Subscript>4</Subscript> picosecond laser with SESAM

We report on the LD-pumped passively mode-locked solid-state laser with SESAM (semiconductor saturable absorber mirror), in which the output beam is single passed through a flat mirror. The CW mode-locking pulse at 1064 nm, with an output power of 5 W, a pulse repetition rate of 98 MHz, and a pulse width of 25.3 ps. The beam quality is M ² < 1.12 and the optical-optical efficiency is 35.7%.     

Diode-end-pumped passively mode-locked Nd:GGG laser with a semiconductor saturable mirror

We report on the passive mode-locking of a diode-end-pumped neodymium-doped gadolinium gallium garnet (Nd:GGG) crystal with a semiconductor saturable absorber mirror (SESAM). Continuous wave (CW) mode-locking was obtained. The mode-locked pulse duration was estimated to be ∼17.5 ps with a maximum average output power of 0.4 W. The mode-locked pulses have a repetition rate of 121.5 MHz. To our knowledge, this is the first demonstration of passive mode-locking of the diode pumped Nd:GGG lasers.     

连续锁模Nd∶YVO4激光器实现1 GHz高频输出

LD抽运全固体Nd∶YVO4激光器在连续锁模状态运转下获得了高达1 GHz的重复频率.实验中采用半导体可饱和吸收镜作为锁模元件.利用透过率只有0.8%的输出镜以及可获得较小抽运光斑的2 WLD作为抽运源来优化激光器设计,有效地抑制了调Q锁模状态的运转.低的激光器振荡阈值(35 mW)和连续锁模阈值(0.8 W)显示了饱和吸收体低的插入损耗和激光器合理的设计.在最大抽运1.6 W 时获得了210 mW的平均输出功率.     

连续锁模Nd：YVO4激光器实现1 GHz高频输出

LD抽运全固体Nd:YVO4激光器在连续锁模状态运转下获得了高达1 GHz的重复频率.实验中采用半导体可饱和吸收镜作为锁模元件.利用透过率只有0.8%的输出镜以及可获得较小抽运光斑的2 W LD作为抽运源来优化激光器设计,有效地抑制了调Q锁模状态的运转.低的激光器振荡阈值（35 mW）和连续锁模阈值(0.8 W)显示了饱和吸收体低的插入损耗和激光器合理的设计.在最大抽运1.6 W时获得了210 mW的平均输出功率.     

低阈值掺钛蓝宝石激光器实验研究

结合特殊的谐振腔设计和半导体可饱和吸收镜，建成了一台低阈值的自启动掺钛宝石激光器 . 分别用3％和12％的输出耦合镜，获得了阈值低至390mW和600mW的稳定锁模脉冲输出. 采 用12％输出耦合镜，在12W抽运时，输出平均功率为114mW，对应的典型脉宽为17fs，谱宽 为47nm. 相对于以往的低阈值克尔透镜锁模激光器，锁模工作的范围区域加宽，减小了操作 难度，提高了稳定性. 关键词： 低阈值 半导体可饱和吸收镜 克尔透镜锁模 掺钛蓝宝石激光器     

7 W laser diode end-pumped Nd:YVO<Subscript>4</Subscript> passively mode-locking laser with a semiconductor saturable absorber mirror

A powerful and stable LD end pumped Nd:YVO₄ passively mode-locking oscillator by SESAM was demonstrated. At the pumping power of 30 W, 7 W output was obtained with repetition rate of 79.5 MHz and pulse duration of 15 ps. The beam quality factors M ² were measured to be 1.30 and 1.33, respectively.     

All-fiber clad-pumped Tm3+-doped fiber amplifier using high power fiber combiner

The diode laser (LD) clad-pumped 1947.6 nm continuous wave (CW) Tm³⁺-doped fiber amplifier is reported using the master oscillation power amplifier (MOPA) method. The injected seed laser is provided by an all-fiber LD-clad-pumped Tm³⁺-doped single-mode fiber laser, which has a nearly 2.4 W maximal output power and 0.1 nm ultra-narrow linewidth based on the intracore reflection FBG. Using the 25/400 μm double-clad LMA Tm³⁺-doped fiber as the gain fiber, the output maximal output power is 30.6 W from the fiber amplifier, with a slope efficiency of 39.1% respected to the LD total output power. A high power multi-mode fiber combiner is used to couple high power LD light into the gain fiber. The output wavelength is also located at 1947.6 nm, with the slightly expanded laser linewidth of 0.2 nm.     

532-nm picosecond pulse generated in a passively mode-locked Nd:YVO_4 laser

A diode-pumped continuous-wave （CW） mode-locked Nd：YVO4/KTP green laser with semiconductor saturable absorber mirror （SESAM） is demonstrated. The maximum output power of CW mode-locked green laser is obtained to be 552 mW at the incident pump power of 7.25 W, corresponding to an opticai-optical conversion efficiency of about 7.6%. The 532-nm CW mode-locked pulse duration is estimated to be about 8.4 ps with the repetition rate of 87 MHz.     

Periodic adjustment of the position of a laser beam spot on a semiconductor saturable absorber mirror in a passively mode-locked solid-state laser

A laser diode end-pumped passively mode-locked Nd:YVO₄ solid-state laser with a semiconductor saturable absorber mirror (SESAM), in which the intracavity laser beam spot on the SESAM can be adjusted periodically, is investigated. Inserting a rectangular prism (RP) into the laser cavity is a promising approach towards the goal of periodically moving the position of the focus spot of the intracavity pulse on the SESAM surface to avoid the long-time irradiation of the laser beam on the same position, thereby solving a series of problems caused by damage to the SESAM and greatly prolonging its usage life. The adjustment of the rectangular prism in the laser cavity does not break the stable continuous wave (CW) mode-locked condition. The laser generates a stable picosecond pulse sequence at 1064 nm with an output power of 3.6 W and a pulse width of 14 ps. The instabilities of the output power and the pulse width are 1.77% and 4.5%, respectively.     

High power CW mode-locked frequency-doubled Nd: YAG laser pump source

The resonantor design asnd dynamic performance of a CW actively modelocked frequenxy-doubled Nd: YAG laser pump source with a single-lens telescopic resonator have been researched. 16W CW mode-locking out-put power and 1.6W CW mode-locking frequency-doubled green light output were obtained with 200 MHz repetition rate and 3.5kW single pump lamp.     

激光二极管侧面抽运Nd∶YAG锁模激光器的研究

利用谐振腔的稳定条件对激光二极管侧面抽运的 Nd∶YAG锁模直腔的稳区特性和谐振腔内的光斑分布进行了分析。根据对腔参量的分析,选取合适的腔参量设计了一个简单的侧面抽运直腔,该谐振腔腔形简单,没有像散,振荡光模式好,有利于激光器的锁模运转。实验中采用国内自行研制的半导体可饱和吸收镜,实现了激光二极管侧面抽运半导体可饱和吸收镜锁模Nd∶YAG激光器的连续锁模运转,平均输出功率为 2 W,锁模脉冲宽度为10 ps,重复频率为100 MHz。结合实验结果进一步讨论了半导体可饱和吸收镜的一些参量如饱和恢复时间、调制深度等对实现稳定连续锁模的影响。     

High efficiency passive mode-locked Nd:YVO<Subscript>4</Subscript> laser based on SESAM under direct pumping at 880 nm

We report on an 880 nm LD pumped passive mode-locked TEM₀₀ Nd:YVO₄ laser based on a semiconductor saturable absorber mirror (SESAM), with a high optical-to-optical conversion efficiency of 67.3%, and a slope efficiency of 71%. When the absorbed pump power was 11 W, 7.4 W average output power of 1064 nm continuous-wave mode-locked laser was achieved. To our knowledge, this is the highest optical-to-optical conversion efficiency among all the published reports of 880 nm LD pumped SESAM passive mode-locked lasers. The repetition rate of mode-locked pulse was 80 MHz with 26 ps pulse width. The maximum pulse energy and peak power were 92.5 nJ and 3.6 kW, respectively.     

半导体可饱和吸收镜锁模的钒酸盐混晶Nd:Gd0.1Y0.9VO4激光器

采用Nd∶Gd_0.1Y_0.9VO₄晶体作为增益介质和Z形腔结构,分析比较了腔内加入自行设计的镀和不镀高反膜的半导体可饱和吸收镜（SESAM）对激光锁模的影响.在腔内加入镀膜SESAM后,激光锁模阈值由1.69W下降为1.45W,并且锁模更稳定.在2W抽运功率下,在1064nm中心波长处获得了双端250mW的连续锁模输出,光光转换效率为12.5%,重复频率为142.25MHz. 关键词： 0.1Y_0.9VO₄激光器')" href="#">Nd∶Gd_0.1Y_0.9VO₄激光器 半导体可饱和吸收镜 连续锁模     

Dynamic process of self-started self-mode-locked Ti:sapphire laser with a semiconductor saturable absorber mirror

Dynamic process of self-started self-mode-locked Ti : sapphire laser with a semiconductor saturable absorber mirror (SESAM) was investigated and two mode-locking starting processes were found in which one is fast and the other is slow. In the fast starting process, a mode-locking build-up time of about 400 μs was needed during which pure passive mode-locking process was caused by the SESAM and Kerr-lens mode-locking process arose from the nonlinearity of the Ti : sapphire gain medium. In the slow starting process, a build-up time of about several minutes was found in which temperature effect of the SESAM dominates the dynamic process.     

High-power passive mode-locking of a diode pumped Yb:GdVO4 laser

Passive mode-locking of a diode pumped Yb-doped GdVO₄ crystal laser was demonstrated for the first time to our knowledge. The laser was mode-locked at the wavelength of 1019.1 nm and had an average output power of 1.01 W. The mode-locked pulse duration was 3.1 ps. The laser was end-pumped by a high-power fiber pigtailed laser diode bar and the mode-locking was enabled by a semiconductor saturable absorber mirror (SESAM).