Ferromagnetic resonance of magnetic field oriented Fe3O4 nanoparticles in frozen ferrofluids

Measurements of the orientational dependence of the ferromagnetic resonance (FMR) spectra are made on Fe₃O₄ nanoparticles in ferrofluids solidified in dc magnetic fields. The in field solidification locks the direction of magnetization parallel to the direction of the cooling field enabling measurements as a function of orientation with respect to the direction of magnetization in the frozen state. The g value of the FMR spectra at 77 K is 2.16 and the anisotropy constant is −1.23 J/m³. A marked reduction of the difference between the field position in the parallel and perpendicular orientation onsets on warming to 140 K well below the melting temperature of the fluid carrier and is attributed to the onset of fluctuations in the direction of the magnetization in the solid phase. The phase transition of the magnetic symmetry observed in bulk Fe₃O₄ occurs at much lower temperature in the nanoparticles.     

Intrinsic magnetic properties of In2O3 and transition metal-doped-In2O3

This paper reports on the influence of the sintering temperature and atmosphere and transition-metal doping on the magnetic properties of nanocrystalline and bulk In₂O₃. Undoped nanocrystalline In₂O₃ is diamagnetic whatever the sintering temperature and atmosphere. All single-phase transition-metal-doped In₂O₃ samples are paramagnetic, with a paramagnetic effective moment originating from weakly interacting transition metal ions. No trace of ferromagnetism has been detected even with samples sintered under argon, except extrinsic ferromagnetism for samples with magnetic dopant concentrations exceeding the solubility limit.     

Effect of a low magnetic field on crystallinity and magnetic susceptibility of molecular magnet {NBu4[FeCr(ox)3]}x (NBu4=tetra( n-butyl) ammonium ion; ox=oxalate ion)

Molecular magnet {NBu₄[Fe Cr(ox)₃]}_x (NBu₄⁺=tetra(n-buty1) ammonium ion; ox²⁻=oxalate ion) was synthesized under an applied low magnetic field of 0.3 T in comparison to that synthesized without a field. Their crystallinities, morphologies and magnetic properties were characterized by using the X-ray diffractionmeter, the transmission electron microscope, and a superconducting quantum interference device. It is found that the average size of particles synthesized under the applied field appears larger than that synthesized without a field. Moreover, its crystallinity, morphology and magnetic susceptibility have also been improved. However, its chemical structure and ferromagnetic phase transition temperature T_c do not change. Possible reasons to explain this effect are also discussed.     

Magnetic characterization of the non centrosymmetric Ba3NbFe3Si2O14 langasite

The potential relevance of the Ba₃NbFe₃Si₂O₁₄ langasite in the field of multiferroism was investigated. Interesting properties were expected, in particular in view of the frustrating stacking of its magnetic Fe³⁺ cations into triangular planes of triangle units. We hereafter report results of specific heat and magnetic measurements, Mössbauer spectroscopy and neutron diffraction. A peculiar magnetic structure is found out at low temperature. The Fe³⁺ magnetic moments adopt a triangular 120° configuration within each triangle, which is in-phase propagated in each triangular plane and is helically modulated from plane to plane.     

Synthesis and magnetic properties of antiferromagnetic Co3O4 nanoparticles

Antiferromagnetic Co₃O₄ nanoparticles with diameter around 30 nm have been synthesized by a solution-based method. The phase identification by the wide-angle X-ray powder diffraction indicates that the Co₃O₄ nanoparticle has a cubic spinel structure with a lattice constant of 0.80843(2) nm. The image of field emission scanning electron microscope shows that the nanoparticles are assembled together to form nanorods. The magnetic properties of Co₃O₄ fine particles have been measured by a superconducting quantum interference device magnetometer. A deviation of the Néel temperature from the bulk is observed, which can be well described by the theory of finite-size scaling. An enhanced coercivity as well as a loop shift are observed in the field-cooled hysteresis loop. The exchange bias field decreases with increasing temperature and diminishes at the Néel temperature. The training effect and the opening of the loop reveal the existence of the spin-glass-like surface spins.     

Growth of single-crystal magnetite nanowires from Fe3O4 nanoparticles in a surfactant-free hydrothermal process

Single-crystal magnetite nanowires with average diameter of ca. 20 nm and length of up to several micrometers were prepared by a simple alkaline surfactant-free hydrothermal process. The crystallinity, purity, morphology, and structural features of the as-prepared magnetite nanowires were investigated by powder X-ray diffraction, transmission electron microscopy (TEM) and selected area electron diffraction. The composition and length of nanowires depends on the pH, with higher pH favoring longer nanowires composed entirely of Fe₃O₄. A mechanism for nanowire growth is proposed.     

Fabrication and magnetic properties of Fe3O4 nanowire arrays in different diameters

Fe₃O₄ nanowire arrays with different diameters of D=50, 100, 150 and 200 nm were prepared in anodic aluminum oxide (AAO) templates by an electrodeposition method followed by heat-treating processes. A vibrating sample magnetometer (VSM) and a Quantum Design SQUID MPMS magnetometer were used to investigate the magnetic properties. At room temperature the nanowire arrays change from superparamagnetism to ferromagnetism as the diameter increases from 50 to 200 nm. The zero-field-cooled (ZFC) and field-cooled (FC) magnetization measurements show that the blocking temperature T_B increases with the diameter of nanowire. The ZFC curves of D=50 nm nanowire arrays under different applied fields (H) were measured and a power relationship between T_B and H were found. The temperature dependence of coercivity below T_B was also investigated. Mössbauer spectra and micromagnetic simulation were used to study the micro-magnetic structure of nanowire arrays and the static distribution of magnetic moments of D=200 nm nanowire arrays was investigated. The unique magnetic behaviors were interpreted by the competition of the demagnetization energy of quasi-one-dimensional nanostructures and the magnetocrystalline anisotropy energy of particles in nanowires.     

Synthesis and magnetic properties of CoFe2O4 ferrite nanoparticles

CoFe₂O₄ ferrite nanoparticles were prepared by a modified chemical coprecipitation route. Structural and magnetic properties were systematically investigated. X-ray diffraction results showed that the sample was in single phase with the space group . The results of field-emission scanning electronic microscopy showed that the grains appeared spherical with diameters ranging from 20 to 30 nm. The composition determined by energy-dispersive spectroscopy was stoichiometry of CoFe₂O₄. The Curie temperature in the process of increasing temperature was slightly higher than that in the process of decreasing temperature. This can be understood by the fact that heating changed Co²⁺ ion redistribution in tetrahedral and in octahedral sites. The coercivity of the synthesized CoFe₂O₄ samples was lower than the theoretical values, which could be explained by the mono-domain structure and a transformation from ferrimagnetic to superparamagnetic state.     

Photocontrol of magnetization in Al-substituted Fe3O4 thin films

Thin films of (111)-oriented spinel ferrite Al_0.5Fe_2.5O₄ have been prepared by a pulsed-laser deposition (PLD) technique on α-Al₂O₃ (0001) substrates. The films exhibit cluster-glass behaviors with a spin-freezing temperature, T_g, near or above room temperature. The magnetization was found to increase following light irradiation below T_g, which indicates the photoinduced melting of cluster-glass states. An analysis comparing the dynamic behavior of magnetic response to light irradiation between zero-field-cooled (ZFC) states and field-cooled (FC) states at 10 K under various light intensities, I, revealed that the direct photoexcitation of spins occurs when I≤0.78 mW/mm², while the thermal heating effect following the light absorption of the samples also contributes to the enhancement of magnetization when I≥1.22 mW/mm². The magnetization of the films could be controlled by light irradiation even at room temperature. This suggests the possibility of utilizing these films in the development of novel magneto-optical memory devices.     

Large coercivity and small exchange bias in Mn3O4 / MnO nanoparticles

Core/shell structured Mn₃O₄/MnO nanoparticles were prepared by arc evaporating metallic manganese in air. These nanoparticles show unconventional exchange bias phenomena, in which the Curie temperature of the ferrimagnetic Mn₃O₄ is lower than the Néel temperature of the antiferromagnetic MnO. The exchange bias field in Mn₃O₄/MnO nanoparticles is much smaller than that in Mn₃O₄/Mn nanoparticles, due to the weak interfacial exchange coupling. The coercivity of the Mn₃O₄ phase in nanoscale is almost three times greater than that of the bulk Mn₃O₄.     

Structural properties of amorphous Fe2O3 nanoparticles

We have investigated the microstructure of amorphous Fe₂O₃ nanoparticles by using molecular dynamics (MD) simulations. Non-periodic boundary conditions with Born-Mayer type pair potentials were used to simulate a spherical model of different diameters of 2, 3, 4 and 5 nm. Structural properties of an amorphous model obtained at 350 K have been analyzed in detail through the partial radial distribution functions (PRPFs), coordination number distributions, bond-angle distributions and interatomic distances. Calculations showed that structural characteristics of the model are in qualitative agreement with the experimental data. The observation of a large amount of structural defects as the particle size is decreased suggested that surface structure strongly depends on the size of nanoparticles. In addition, surface structure of amorphous Fe₂O₃ nanoparticles have been studied and compared with that observed in the core and in the bulk counterpart. Radial density profiles and stoichiometry in morphous Fe₂O₃ nanoparticles were also found and discussed.     

Two magnetic phase transitions in quasi-one-dimensional system SrCo2V2O8

Magnetic properties of SrCo₂V ₂O₈ single crystal are investigated by means of ac magnetic susceptibility, dc magnetization and heat capacity measurements. The results show that SrCo₂V ₂O₈ possesses two canted antiferromagnetic transitions at ∼5 and ∼3 K, which is different from isostructural BaCo₂V ₂O₈ with only one antiferromagnetic transition at ∼5 K. We suggest that such different magnetic properties are mainly due to their different structural symmetry.     

Temperature dependence of magnetic properties of NiFe2O4 nanoparticles embeded in SiO2 matrix

Spinel ferrite NiFe₂O₄ nanoparticles (?25 nm) in SiO₂ matrix were prepared by sol–gel method. The phase and average crystallite size of the samples were determined by X-ray diffraction method and the particle size distributions were studied by a transmission electron microscope. Magnetic properties of the samples were investigated with different ferrite particle sizes and at various temperatures down to 10 K. Superparamagnetic properties were observed at room temperature when the particle size is less than 10 nm.In superparamagnetic state, the field dependence of magnetization follows Langevin function which was originally developed for paramagnetism. The effective anisotropy constant K_eff is found to increase significantly with the decrease in particle volume and an order of magnitude higher than that of the bulk samples when the particle size is below 5 nm due to the dominance of surface anisotropy. In case of nanosized systems, the effect of size reduction on the law of approach to saturation has also been studied in detail.     

Use of ferromagnetic resonance to determine the size distribution of γ-Fe2O3 nanoparticles

Ferromagnetic resonance (FMR) experiments were performed as a function of temperature (10-300 K) on γ-Fe₂O₃ nanoparticles prepared by a sol-gel method. By measuring at several temperatures the relative intensity of the spectrum due to superparamagnetic particles and the anisotropy field of the spectrum due to ferrimagnetic particles, we determined the size distribution of γ-Fe₂O₃ nanoparticles. It was found to be a log-normal distribution with a most probable diameter D_m=8.1 nm and a standard deviation σ=0.25. Transmission electron microscopy measurements performed on the same samples yielded a log-normal distribution with D_m=11.2 nm and σ=0.23. The difference is attributed to the existence of a disordered surface layer in the particles.     

Nanobuffering property of Fe3O4 magnetic nanoparticles in aqueous solution

In the present study, the buffering effect of magnetite nanoparticles (Fe₃O₄) dispersed in an aqueous solution on the local pH$pH$ value is investigated. It manifests itself in the fact that when some amount of acid or base is added to the solution then the solution near the nanoparticles surface becomes, respectively, less acidic and less alkaline than it is expected. It is the result of both the local electrostatic field, which represents the electric double layer at the surface of magnetic nanoparticles and the magnetic field around the nanoparticles. The magnetite nanoparticles exhibit very low toxicity and they are becoming increasingly important for new biomedical applications related to their effects on chemical reactions in body tissues and cells. The question arises, how strong are these effects at the nanoscale? The strength of the buffering property of magnetite nanoparticles is investigated both theoretically and experimentally by the direct measurement of the local pH$pH$ value of a magnetic nanoparticles suspension. The theoretical model is based on stochastic equations describing the ions diffusing in the neighborhood of the electric double layer of the magnetic material. The electric double layer is modeled with the help of the Poisson–Boltzmann model. It is directly shown that both the electrostatic field and the magnetic field are responsible for the observed local changes of the pH$pH$ value with respect to the bulk pH$pH$ value.     

Large nonlinear optical properties of Fe2O3 nanoparticles

Nonlinear optical properties of Fe₂O₃ nanoparticles were investigated by the signal-beam Z-scan technique with Ar⁺ and Ne–He lasers. The largest reported effective nonlinear coefficient, n₂=−8.07×10⁻⁷ cm²/W, was obtained. It is demonstrated that the nonlinear optical response originals from quantum confinement effect.     

High-frequency permeability and permittivity of NixZn(1−x)Fe2O4 thick film

Magnetic materials such as Ni_xZn_(1−x)Fe₂O₄ have resonant frequency in high frequency; therefore, they are more useful especially in microwaves. The Ni_xZn_(1−x)Fe₂O₄ was prepared by the chemical coprecipitation method using citrate precursors, and the fritless thick film was screen printed on alumina substrates. The composition-dependent permeability and permittivity in the high frequency 8–12 GHz are investigated. Using the overlay technique on Ag-thick-film patch antenna, the change in reflectance and transmittance has been measured. The Ni_xZn_(1−x)Fe₂O₄ thick film, when used as overlay on Ag-thick-film patch antenna, changes the resonance characteristics. The changes in resonance frequency, reflectance and transmittance have been used to calculate the permeability and permittivity of the thick film. Zinc-concentration-dependent changes are obtained.     

Preparation and characterization of silica-coated Fe3O4 nanoparticles used as precursor of ferrofluids

Fe₃O₄ magnetic nanoparticles (MNPs) were synthesized by the co-precipitation of Fe³⁺ and Fe²⁺ with ammonium hydroxide. The sodium citrate-modified Fe₃O₄ MNPs were prepared under Ar protection and were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray powder diffraction (XRD) and vibrating sample magnetometer (VSM). To improve the oxidation resistance of Fe₃O₄ MNPs, a silica layer was coated onto the modified and unmodified MNPs by the hydrolysis of tetraethoxysilane (TEOS) at 50 °C and pH 9. Afterwards, the silica-coated Fe₃O₄ core/shell MNPs were modified by oleic acid (OA) and were tested by IR and VSM. IR results revealed that the OA was successfully grafted onto the silica shell. The Fe₃O₄/SiO₂ core/shell MNPs modified by OA were used to prepare water-based ferrofluids (FFs) using PEG as the second layer of surfactants. The properties of FFs were characterized using a UV-vis spectrophotometer, a Gouy magnetic balance, a laser particle size analyzer and a Brookfield LVDV-III+ rheometer.     

The effect of B2O3 addition to the microstructure and magnetic properties of Ni0.4Zn0.6Fe2O4 ferrite

The effects of 0.01 and 0.1 mol B₂O₃ addition to the microstructure and magnetic properties of a Ni–Zn ferrite composition expressed by a molecular formula of Ni_0.4Zn_0.6Fe₂O₄ were investigated. The toroid-shaped samples prepared by pressing the milled raw materials used in the preparation of the composition were sintered in the range of 1000–1300 °C. The addition of 0.01 mol B₂O₃ increased the grain growth and densification giving rise to reduced intergranular and intragranular porosity due to liquid-phase sintering. The sintered toroid sample at 1300 °C gave the optimum magnetic properties of B_r=170 mT, H_c=0.025 kA/m and a high initial permeability value of μ_i=4000. The increment of the B₂O₃ content to 0.1 mol resulted in a pronounced grain growth and also gave rise to large porosity due to the evaporation of B₂O₃ at higher sintering temperatures. Hence, it resulted in an air-gap effect in the hysteresis curves of these samples.     

Synthesis and magnetic properties of cobalt ferrite (CoFe2O4) nanoparticles prepared by wet chemical route

Magnetic nanoparticles of cobalt ferrite have been synthesized by wet chemical method using stable ferric and cobalt salts with oleic acid as the surfactant. X-ray Diffraction (XRD) and Transmission Electron Microscope (TEM) confirmed the formation of single-phase cobalt ferrite nanoparticles in the range 15–48 nm depending on the annealing temperature and time. The size of the particles increases with annealing temperature and time while the coercivity goes through a maximum, peaking at around 28 nm. A very large coercivity (10.5 kOe) is observed on cooling down to 77 K while typical blocking effects are observed below about 260 K. The high field moment is observed to be small for smaller particles and approaches the bulk value for large particles.