Effect of magnetic field on the TC and magnetic properties for the aligned MnBi compound

In the compound MnBi, a first-order transition from the paramagnetic to the ferromagnetic state can be triggered by an applied magnetic field and the Curie temperature increases nearly linearly with an increase in magnetic field by ∼2 K/T. Under a field of 10 T, T_C increases by 20 and 22 K during heating and cooling, respectively. Under certain conditions a reversible magnetic field or temperature induced transition between the paramagnetic and ferromagnetic states can occur. A magnetic and crystallographic H-T phase diagram for MnBi is given. Magnetic properties of MnBi compound aligned in a Bi matrix have been investigated. In the low temperature phase MnBi, a spin-reorientation takes place during which the magnetic moments rotate from being parallel to the c-axis towards the basal plane at ∼90 K. A measuring Dc magnetic field applied parallel to the c-axis of MnBi suppresses partly the spin-reorientation transition. Interestingly, the fabricated magnetic field increases the temperature of spin-reorientation transition T_s and the change in magnetization for MnBi. For the sample solidified under 0.5 T, the change in magnetization is ∼70% and T_s is ∼91 K.     

Theoretical investigation of magnetic property in paramagnetic neodymium gallium garnet under high magnetic field

The magnetic property in neodymium gallium garnet (NdGaG) is studied by the quantum theory. The ground configuration split states are calculated taking into account the spin–orbit interaction and crystal field effect. Taking account of the Nd–Nd exchange interaction, a good agreement between experimental and theoretical values can be obtained for the variation of the magnetic moment with the external magnetic field under “extreme” conditions (low temperature and high magnetic field). Moreover, the temperature dependence of magnetic moment and the magnetic susceptibility χ is also discussed. Above 30 K, the magnetization (M) shows a linear field (H_e) dependence.     

Crystal structure and magnetic properties of MnxBi100−x (x=48, 50, 55 and 60) compounds

Mn_xBi_100−x (x=48, 50, 55 and 60) alloys were prepared by the induction melting technique, and subjected to melt spinning and subsequent ball milling. XRD shows that the as-milled powders were mainly composed of LTP MnBi. Increasing melt spinning speed and reducing annealing treatment time can restrain the segregation of Mn from MnBi liquid during the peritectic reaction, which increases the LTP MnBi content. High energy ball milling results in the coercivity increase of MnBi powders. With increasing milling time, the coercivity increases initially and then decreases gradually. After ball milling for 4 h, the coercivity of the Mn_xBi_100−x powders is 11.4 kOe for x=48 and 14.8 kOe for x=55. The optimal composition of Mn₄₈Bi₅₂ with more LTP has an M_2.2 T of 49.98 emu/g and an M_r of 33.57 emu/g.     

Heat treatment effects on microstructure and magnetic properties of Mn-Zn ferrite powders

Mn-Zn ferrite powders (Mn_0.5Zn_0.5Fe₂O₄) were prepared by the nitrate-citrate auto-combustion method and subsequently annealed in air or argon. The effects of heat treatment temperature on crystalline phases formation, microstructure and magnetic properties of Mn-Zn ferrite were investigated by X-ray diffraction, thermogravimetric and differential thermal analysis, scanning electron microscopy and vibrating sample magnetometer. Ferrites decomposed to Fe₂O₃ and Mn₂O₃ after annealing above 550 °C in air, and had poor magnetic properties. However, Fe₂O₃ and Mn₂O₃ were dissolved after ferrites annealing above 1100 °C. Moreover, the 1200 °C annealed sample showed pure ferrite phase, larger saturation magnetization (M_s=48.15 emu g⁻¹) and lower coercivity (H_c=51 Oe) compared with the auto-combusted ferrite powder (M_s=44.32 emu g⁻¹, H_c=70 Oe). The 600 °C air annealed sample had the largest saturation magnetization (M_s=56.37 emu g⁻¹) and the lowest coercivity (H_c=32 Oe) due to the presence of pure ferrite spinel phase, its microstructure and crystalline size.     

Study on the surface bioactivity of novel magnetic A-W glass ceramic in vitro

Novel magnetic A-W glass ceramic (M GC) in the system MgO-CaO-SiO₂-P₂O₅-CaF₂-MnO-ZnO-Fe₂O₃ was synthesized by doping Mn-Zn ferrite to apatite-wollastonite glass ceramic. The phase composition was investigated by XRD. The magnetic property was measured by VSM. The in vitro bioactivity was tested by immersion in simulated body fluid. The result shows apatite, wollastonite, fluorapatite and Zn_0.75Mn_0.75Fe_1.5O₄ are the main phases of M GC. Under a magnetic field of 10,000 Oe, the saturation magnetization and coercive force of the material are 6 emu g⁻ and 180 Oe, respectively. After soaking in SBF for 14 days, the surface of M GC is coated by a hydroxycarbonate apatite layer.     

Magnetic characterization of Mn5SiB2 and Mn5Si3 phases

In this work the Mn₅Si₃ and Mn₅SiB₂ phases were produced via arc melting and heat treatment at 1000 °C for 50 h under argon. A detailed microstructure characterization indicated the formation of single-phase Mn₅Si₃ and near single-phase Mn₅SiB₂ microstructures. The magnetic behavior of the Mn₅Si₃ phase was investigated and the results are in agreement with previous data from the literature, which indicates the existence of two anti-ferromagnetic structures for temperatures below 98 K. The Mn₅SiB₂ phase shows a ferromagnetic behavior presenting a saturation magnetization M_s of about 5.35×10⁵ A/m (0.67 T) at room temperature and an estimated Curie temperature between 470 and 490 K. In addition, AC susceptibility data indicates no evidence of any other magnetic ordering in 4-300 K temperature range. The magnetization values are smaller than that calculated using the magnetic moment from previous literature NMR results. This result suggests a probable ferrimagnetic arrangement of the Mn moments.     

Peculiar magnetic aftereffect of highly diluted frozen magnetic fluids

A very stably dispersed magnetic fluid (mother MF) and its 1000-times diluted solution were independently zero-field-cooled from room temperature to 5 K followed by application of a magnetic field of 2.86 MA/m for 300 s. After the field was removed (t=0)$(t=0)$, its residual magnetization M was measured as a function of time t for 80 000 s. After measurement, the MF sample was heated to room temperature, and the experiment was repeated after cooling to 5 K and again applying and removing the 2.86 MA/m field. We performed the same experiment several times, and obtained a different M vs t curve each time. With each cycle, the average M increased and the M vs t curve converged to a universal curve. In the initial few cycles, the value of M is very small, fluctuates and surprisingly increases with t in some time region. These characteristics are common in both the mother MF and diluted MF. We consequently propose the following physical model. When the MF is cooled, the isolated surfactant molecules in the solvent trigger the generation of magnetic colloid micelles. In other words, there occurs a phase transition from the magnetic colloids’ monodispersed phase to a micelle phase. The magnetic dipoles of the micelle's colloids make a closed magnetic flux loop. That is the origin of the anomalously small value of the residual magnetization in the early cycles. After a certain time elapses the micelles spontaneously break due to their residual stress, and a finite magnetic moment of the individual micelle develops. Consequently, M increases with t during this period.     

Magnetization of epitaxial MnGe alloys on Ge(1 1 1) substrates

The structural and magnetic properties of an Mn rich solid phase epitaxy Mn_xGe_1−x alloy grown on a clean 2 × 8-Ge(1 1 1) surface, with a Curie temperature of about 300 K are investigated. Magneto-optical  Kerr effect infers the existence of in-plane easy magnetization direction. We describe the epitaxial registry condition, the room temperature—zero field magnetic structure observed by magnetic force microscopy and the magneto-optical properties. The observations are consistent with the formation of epitaxial Mn₅Ge₃ alloy, with a modulated magnetic structure characterized by asymmetric 180° Bloch walls consisting of a vortex-like configuration of the local magnetization.     

Charge order melting and magnetic transition in Nd0.5(1+x)Ca0.5(1−x)Mn(1−x)CrxO3 system

The magnetic property of double doped manganite Nd_0.5(1+x)Ca_0.5(1−x)Mn_(1−x)Cr_xO₃ with a fixed ratio of Mn³⁺:Mn⁴⁺=1:1 has been investigated. For the undoped sample, it undergoes one transition from charge disordering to charge ordering (CO) associated with paramagnetic (PM)-antiferromagnetic (AFM) phase transition at T<250 K. The long range AFM ordering seems to form at 35 K, rather than previously reported 150 K. At low temperature, an asymmetrical M-H hysteresis loop occurs due to weak AFM coupling. For the doped samples, the substitution of Cr³⁺ for Mn³⁺ ions causes the increase of magnetization and the rise of T_c. As the Cr³⁺ concentration increases, the CO domain gradually becomes smaller and the CO melting process emerges. At low temperature, the FM superexchange interaction between Mn³⁺ and Cr³⁺ ions causes a magnetic upturn, namely, the second FM phase transition.     

Field-induced structural transition and the related magnetic entropy change in Ni43Mn43Co3Sn11 alloy

Magnetic properties and magnetic entropy change ΔS were investigated in Heusler alloy Ni₄₃Mn₄₃Co₃Sn₁₁. With decreasing temperature this alloy undergoes a martensitic structural transition at T_M=188 K. The incorporation of Co atoms enhances ferromagnetic exchange for parent phases. Austenitic phase with cubic structure shows strong ferromagnetic behaviors with Curie temperature T_C^A at 346 K, while martensitic phase shows weak ferromagnetic properties. An external magnetic field can shift T_M to a lower temperature at a rate of 4.4 K/T, and a field-induced structural transition from martensitic to austenitic state takes place at temperatures near but below T_M. As a result, a great magnetic entropy change with positive sign appears. The size of ΔS reaches 33 J/kg K under 5 T magnetic field. More important is that the ΔS displays a table-like peak under 5 T, which is favorable for Ericsson-type refrigerators.     

Critical behavior and magnetic entropy change in the La0.6Sr0.4Mn0.8Fe0.1Cr0.1O3 perovskite

Critical behavior in the La_0.6Sr_0.4Mn_0.8Fe_0.1Cr_0.1O₃ ceramics was studied using magnetization methods. Results show that the paramagnetic–ferromagnetic transition is of second order. Based on the critical behavior analysis using the Banerjee criterion and the Kouvel–Fisher method, we find the critical exponents: β=0.395±0.010, γ=1.402±0.010, and δ=5.208±0.007, for which the magnetic interaction is satisfied within the three-dimensional Heisenberg model. Results indicate the presence of short-range interactions. The magnetic entropy change (−ΔS_M) reached maximum values of 1.75, 1.45, 1.15, 0.8 and 0.43 J Kg⁻¹ K⁻¹ under a magnetic field variation of 5, 4, 3, 2 and 1 T, respectively. Nevertheless, these (−ΔS_M) values are much low for any potential application at this moment. The nature of this phenomenon is discussed in relation to the characteristics of the magnetic phase transition and critical exponents.     

Magnetic characterization of dual phase FeZrB soft magnetic alloy

The magnetic properties and the annealing process of Fe₇₈Zr₇B₁₅ amorphous ribbons are investigated by X-ray diffraction (XRD), differential scanning calorimetry, and vibrating sample magnetometer. The fully amorphous structure of the as-quenched ribbons is confirmed by the XRD pattern. The Curie temperature and the saturation magnetization M_s of the ribbons are 305 °C and 124.3 emu/g, respectively. Annealing at 550 °C can result in an increase in M_s with annealing time due to the increasing crystallized volume fraction of α-Fe phase. The optimized annealing process is established at 550 °C for 20-30 min with maximum M_s of 146.6 emu/g. The morphology of the ribbons annealed at 550 °C is observed by scanning electron microscopy, showing that nanocrystalline α-Fe grains are dispersed in an amorphous matrix.     

Understanding the magnetic ground state of rare-earth intermetallic compound Ce4Sb3: Magnetization and neutron diffraction studies

Magnetization and neutron diffraction studies have been performed on Ce₄Sb₃ compound (cubic Th₃P₄-type, space group I4¯3d, no. 220). Magnetization of Ce₄Sb₃ reveals a ferromagnetic transition at ∼5 K, the temperature below which the zero-field-cooled and field-cooled magnetization bifurcate in low applied fields. However, a saturation magnetization (M_S) value of only ∼0.93μ_B/Ce³⁺ is observed at 1.8 K, suggesting possible presence of crystal field effects and a paramagnetic/antiferromagnetic Ce³⁺ moment. Magnetocaloric effect in this compound has been computed using the magnetization vs. field data obtained in the vicinity of the magnetic transition, and a maximum magnetic entropy change, −ΔS_M, of ∼8.9 J/kg/K is obtained at 5 K for a field change of 5 T. Inverse magnetocaloric effect occurs at ∼2 K in 5 T indicating the presence of antiferromagnetic component. This has been further confirmed by the neutron diffraction study that evidences commensurate antiferromagnetic ordering at 2 K in zero magnetic field. A magnetic moment of ∼1.24μ_B/Ce³⁺ is obtained at 2 K and the magnetic moments are directed along Z-axis.     

Structural and magnetic properties of Mg(In2−xMnx)O4 system

We synthesized the Mn-doped Mg(In_2−xMn_x)O₄ oxides with 0.03?x?0.55 using a solid-state reaction method. The X-ray diffraction patterns of the samples were in a good agreement with that of a distorted orthorhombic spinel phase. Their lattice parameters and unit-cell volumes decrease with x due to the substitution of the smaller Mn³⁺ ions to the larger In³⁺ ions. The undoped MgIn₂O₄ oxide presents diamagnetic signals for 5 K?T?300 K. The M(H) at T=300 K reveals a fairly negative-sloped linear relationship. Neither magnetic hysteresis nor saturation behavior was observed in this parent sample. For the Mn-doped samples, however, positive magnetization were observed between 5 and 300 K even if the x value is as low as 0.03. The mass susceptibility enhances with Mn content and it reaches the highest value of 1.4×10⁻³ emu/g Oe (at T=300 K) at x=0.45. Furthermore, the Mn-doped oxides with x=0.06 and 0.2, respectively, exhibit nonlinear magnetization curves and small hysteretic loops in low magnetic fields. Susceptibilities of the Mn-doped samples are much higher than those of MnO₂, Mn₂O₃ oxides, and Mn metals. These results show that the oxides have potential to be magnetic semiconductors.     

Effect of high magnetic field annealing on the microstructure and magnetic properties of Co-Fe layered double hydroxide

The effects of high magnetic field (10 T) on the products obtained by calcination of Co-Fe LDH precursors at different temperatures were investigated. The XRD results indicated that Fe^III substituted for Co^III in Co₃O₄ to yield Co^IICo^IIIFe^IIIO₄ under the calcination of Co-Fe LDH precursors at 400 °C. The products obtained by magnetic field annealing at 400 °C had a porous plate-like morphology, whereas the products without magnetic field annealing were composed of nanoparticles. It was seen that CoFe₂O₄ phase could be formed at low temperature (about 500 °C) under the magnetic field annealing. The grain size of products obtained by magnetic field annealing at 800 °C was larger than that of zero magnetic field. It was found that the saturation magnetization was significantly enhanced after magnetic field annealing, especially at lower temperature (≤600 °C). The possible reason for the effects on the microstructure and magnetic properties of products obtained by magnetic field annealing was discussed.     

Effect of Sn-doping on the structural,magnetic and magnetocaloric properties of La0.67Ba0.33Mn1−xSnxO3 compounds

Magnetocaloric effect (MCE) in fine-grained perovskite manganites of the type La_0.67Ba_0.33Mn_1−xSn_xO₃ (x=0.05, 0.1 and 0.15) were prepared by the solid-state method. The prepared samples remain single phase and exhibit paramagnetic to ferromagnetic phase transition (T_C) at 340, 325 and 288 K for x=0.05, 0.1 and 0.15, respectively. From the measured magnetization data of La_0.67Ba_0.33Mn_1−xSn_xO₃ compounds as a function of field (2 T), the associated magnetic entropy change close to their respective Curie temperatures and the relative cooling power (RCP) have been determined. Large MCE has been obtained in all samples and |ΔS_M|_max reached the highest value of 2.49 J/kg K at T_C (288 K) for the sample x=0.15, with H=2 T.     

Magnetocaloric properties in the Cr-doped La0.7Sr0.3MnO3 manganites

Single-phase polycrystalline samples of La_0.7Sr_0.3Mn_1-xCr_xO₃ with nominal composition of x=0.00, 0.20, 0.40 and 0.50 were prepared by a conventional solid-state reaction method in air. Investigations of magnetization were carried out in the temperature range 5-400 K and magnetic field range 0-8 T. It was found that the Curie temperature T_C decreases with increasing x and the maximum magnetic entropy change (−ΔS_M) for x=0.20 is ∼1.203 and ∼2.653 J/kg K, respectively for 2 and 6 T magnetic field near the temperature of 280 K.     

Effects of the Hf content on the microstructure and magnetic properties of Co-Hf-Ta thin films

Effects of the Hf content in Co-Hf-Ta thin films on the microstructure and magnetic properties were investigated in this study. It was found that appropriate Hf addition can effectively refine the Co grain size. Co grain sizes sharply decreased from 50 nm down to 2.3 nm with increasing the Hf content from 1.02 at.% to 2.81 at.%, leading to the reduced magneto-crystalline anisotropy. The Co-Hf-Ta thin films with small Co grains reveal low anisotropy field, low coercivity, and high resistivity. By optimizing the Hf content, the film with Hf concentration of 2.81 at.% exhibits excellent soft magnetic properties: high saturation magnetization (4πM_S ∼ 13.6 kG), and low coercivity (H_C ∼ 0.6 Oe). The effective permeability of the film reaches 800 and remains constant up to 1 GHz.     

Magnetocaloric effect in high Ni content Ni52Mn48−xInx alloys under low field change

Ni-rich Heusler alloys Ni₅₂Mn_48−xIn_x (x=15.5, 16 and 16.5) were prepared by the arc melting method. X-ray diffraction analysis revealed that the martensite has orthorhombic structure (S.G. Pmm2) at room temperature. The only alloy with x=15.5 has structural transmission from martensite to austenite without any magnetic transmission. The temperature dependence and the field dependence of the magnetization measurement indicated that the magnetization increased with the decreasing of the concerntration of Mn. The lesser the Mn atoms located in the In atom sites, the weaker the total AFM interaction in the system. Giant entropy changes ΔS_M(T, H) were found in Ni₅₂Mn_48−xIn_x alloys with the maximum ΔS_M value of 22.3 J kg K for the sample with x=16.5 at 270 K under the magnetic field change of 1.5 T.     

Martensitic transformation and magnetocaloric properties of Sn doping Mn-Ni-Ga alloys

The effects of Sn addition on phase transformation behavior and magnetocaloric properties of Mn₅₀Ni₂₅Ga_25−xSn_x (x=0, 0.1, 0.5, 1 and 2 at%) alloys were investigated in this work. The results show that the addition of Sn reduces the structural transformation temperatures. It is found that the second phase exists in the austenite matrix of the as-casted alloys at room temperature. After being annealed at 1073 K for 48 h, the precipitates totally soluted into the matrix. Magnetization measurements indicate that the saturation magnetizations of the alloys increase significantly with increase in Sn contents. In addition, the ΔM/ΔS obviously increases with increase in the Sn contents, implying the higher efficiency shift of the martensitic transformation temperature under the magnetic field.