Labeling of macrophages using bacterial magnetosomes and their characterization by magnetic resonance imaging

This work investigated macrophages labeled with magnetosomes for the possible detection of inflammations by MR molecular imaging. Pure magnetosomes and macrophages containing magnetosomes were analyzed using a clinical 1.5 T MR-scanner. Relaxivities of magnetosomes and relaxation rates of cells containing magnetosomes were determined. Peritonitis was induced in two mice. T₁, T₂ and T₂* weighted images were acquired following injection of the probes. Pure magnetosomes and labeled cells showed slight effects on T₁, but strong effects on T₂ and T₂* images. Labeled macrophages were located with magnetic resonance imaging (MRI) in the colon area, thus demonstrating the feasibility of the proposed approach.     

Near room temperature magnetocaloric properties of melt-spun Gd100−xBx (x=0, 5, 10, 15, and 20 at%) alloys

The magnetocaloric properties of melt-spun Gd-B alloys were examined with the aim to explore their potential application as magnetic refrigerants near room temperature. A series of Gd_100−xB_x (x=0, 5, 10, 15, and 20 at%) alloys were prepared by melt spinning. With the decrease in Gd/B ratio, Curie temperature (T_C) remains constant at ∼293 K, and saturation magnetization, at 275 K, decreases from ∼100 to ∼78 emu/g. Negligible magnetic hysteresis was observed in these alloys. The peak value of magnetic entropy change, (−ΔS_M)_max, decreased from ∼9.9 J/kg K (0-5 T) and ∼5.5 J/kg K (0-2 T) for melt-spun Gd to ∼7.7 J/kg K (0-5 T) and ∼4.0 J/kg K (0-2 T), respectively for melt-spun Gd₈₅B₁₅ and Gd₈₀B₂₀ alloys. Similarly, the refrigeration capacity (q) decreased monotonously from ∼430 J/kg (0-5 T) for melt-spun Gd to ∼330 J/kg (0-5 T) for melt-spun Gd₈₀B₂₀ alloy. The near room temperature magnetocaloric properties of melt-spun Gd_100−xB_x (0≤x≤20) alloys were found to be comparable to few first-order transition based magnetic refrigerants.     

Preparation of strontium hexaferrite film by pulsed laser deposition with in situ heating and post annealing

Strontium hexaferrite (SrFe₁₂O₁₉) films have been fabricated by pulsed laser deposition on Si(1 0 0) substrate with Pt(1 1 1) underlayer through in situ and post annealing heat treatments. C-axis perpendicular oriented SrFe₁₂O₁₉ films have been confirmed by X-ray diffraction patterns for both of the in situ heated and post annealed films. The cluster-like single domain structures are recognized by magnetic force microscopy. Higher coercivity in perpendicular direction than that for the in-plane direction shows that the films have perpendicular magnetic anisotropy. High perpendicular coercivity, around 3.8 kOe, has been achieved after post annealing at 500 °C. Higher coercivity of the post annealed SrFe₁₂O₁₉ films was found to be related to nanosized grain of about 50–80 nm.     

Influence of Si-N interlayer on the microstructure and magnetic properties of γ′-Fe4N films

The (γ′-Fe₄N/Si-N)_n (n: number of layers) multilayer films and γ′-Fe₄N single layer film synthesized on Si (1 0 0) substrates by direct current magnetron sputtering were annealed at different temperatures. The structures and magnetic properties of as-deposited films and films annealed at different temperatures were characterized using X-ray diffraction, scanning electron microscopy and vibrating sample magnetometer. The results showed that the insertion of Si-N layer had a significant influence on the structures and magnetic properties of γ′-Fe₄N film. Without the addition of Si-N lamination, the iron nitride γ′-Fe₄N tended to transform to α-Fe when annealed at the temperatures over 300 °C. However, the phase transition from γ′-Fe₄N to ?-Fe₃N occurred at annealing temperature of 300 °C for the multilayer films. Furthermore, with increasing annealing temperature up to 400 °C or above, ?-Fe₃N transformed back into γ′-Fe₄N. The magnetic investigations indicated that coercivity of magnetic phase γ′-Fe₄N for as-deposited films decreased from 152 Oe (for single layer) to 57.23 Oe with increasing n up to 30. For the annealed multilayer films, the coercivity values decreased with increasing annealing temperature, except that the film annealed at 300 °C due to the appearance of phase ?-Fe₃N.     

FePt L10 ordering and grain growth using millisecond pulse laser processing

The structural and magnetic properties of ∼12 nm thick FePt thin films grown on Si substrates annealed using a 1064 nm wavelength laser with a 10 ms pulse have been examined. The A1 to L1₀ ordering phase transformation was confirmed by electron and X-ray diffraction. An order parameter near 50% and a maximum coercivity of 12 kOe were obtained with laser energy densities of 25-32 J/cm². Grain growth, quantified by dark field transmission electron microscopy, occurred during chemical ordering at the laser pulse widths studied.     

Synchrotron radiation and polarized neutron study of the enhancement of orbital magnetic moment of Fe in the epitaxial NiFe/Ru multilayer

Epitaxial Ni₈₀Fe₂₀(5 nm)/Ru(x nm)/Ni₈₀Fe₂₀(5 nm) trilayers with thickness x = 0.5-3.0 were prepared on Al₂O₃ substrate. The structure, magnetic properties and magnetic depth profiles of the epitaxial Ni₈₀Fe₂₀(1 1 1)/Ru(0 0 0 1) multilayers were studied by X-ray diffraction, X-ray magnetic circular dichroism and polarized neutron reflectivity. A strongly enhanced orbital moment of Fe in the permalloy layer was observed at the Ru thickness of the first anti-ferromagnetic coupling, which might be due to an interference between two interfaces. At this Ru thickness, the neutron reflectivity data show a 0.8 nm layer at the interface with the magnetic moment perpendicular to the surface plane, which might be due to the enhanced spin-orbital coupling at interface.     

The effect of different temperature annealing on phase relation of LaFe11.5Si1.5 and the magnetocaloric effects of La0.8Ce0.2Fe11.5−xCoxSi1.5 alloys

The phase relation of LaFe_11.5Si_1.5 alloys annealed at different high-temperature from 1223 K (5 h) to 1673 K (0.5 h) has been studied. The powder X-ray diffraction (XRD) patterns show that large amount of 1:13 phase begins to form in the matrix alloy consisting of α-Fe and LaFeSi phases when the annealing temperature is 1423 K. In the temperature range from 1423  to 1523 K, α-Fe and LaFeSi phases rapidly decrease to form 1:13 phase, and LaFeSi phase is rarely observed in the XRD pattern of LaFe_11.5Si_1.5 alloy annealed at 1523 K. With annealing temperature increasing from 1573  to 1673 K, the LaFeSi phase is detected again in the LaFe_11.5Si_1.5 alloy, and there is La₅Si₃ phase when the annealing temperature reaches 1673 K. There almost is no change in the XRD patterns of LaFe_11.5Si_1.5 alloys annealed at 1523 K for 3-5 h. According to this result, the La_0.8Ce_0.2Fe_11.5−xCo_xSi_1.5 (0≤×≤0.7) alloys are annealed at 1523 K (3 h). The analysis of XRD patterns shows that La_0.8Ce_0.2Fe_11.5xCo_xSi_1.5 alloys consist of the NaZn₁₃-type main phase and α-Fe impurity phase. With the increase of Co content from x=0 to 0.7, the Curie temperature T_C increases from 180 to 266 K. Because the increase of Co content can weaken the itinerant electron metamagnetic transition, the order of the magnetic transition at T_C changes from first to second-order between x=0.3 and 0.5. Although the magnetic entropy change decreases from 34.9 to 6.8 J/kg K with increasing Co concentration at a low magnetic field of 0-2 T, the thermal and magnetic hysteresis loss reduces remarkably, which is very important for the magnetic refrigerant near room temperature.     

Low-frequency alternative-current magnetic susceptibility of amorphous and nanocrystalline Co60Fe20B20 films

This investigation experimentally studies the low-frequency alternating-current magnetic susceptibility (χ_ac) of amorphous and nanocrystalline CoFeB films by measuring the magnetic field established by passing currents of various frequencies through such films of various thicknesses (t_f). A CoFeB film is sputtered onto a glass substrate with t_f from 100 Å to 500 Å under the following conditions: (a) As-deposited films were maintained at room temperature (RT) and (b) films were post-annealed at T_A=150 °C for 1 h. The samples thus obtained are analyzed in a magnetic field that was generated by an alternating current (AC) at various frequencies from 10 Hz to 25,000 Hz. The experimental results demonstrate that the χ_ac declines as the thickness of the as-deposited sample and the post-annealed sample (T_A=150 °C) increases because the lower coercivity (H_c) of thinner CoFeB films is similar to a soft magnetic characteristic and is associated with a higher χ_ac value. The best χ_ac value is obtained at a thickness of 100 Å under both conditions. The χ_ac value of the post-annealed sample exceeds that of the RT sample at thicknesses from 100 Å to 500 Å because the magneto crystalline anisotropy of the post-annealed sample yields the highest χ_ac value at the optimal resonance frequency (f_res), at which the spin sensitivity is maximal. The X-ray diffraction patterns (XRD) of as-deposited CoFeB films reveal their amorphous structure. The XRD results for the post-annealed films include a main peak at 2θ=44.7° from the body-centered cubic (BCC) nanocrystalline CoFe that indicated a (110) textured structure. Post-annealing treatment caused that the amorphous structure to become more crystalline by a thermally driven process, such that the χ_ac value of the post-annealed sample exceeded that of the RT sample. This experimental result demonstrates that the χ_ac value decreased as the thickness of the thin film increased. Finally, the CoFeB thin films had the best χ_ac at low frequency (<50 Hz) following post-annealing treatment. The results obtained under the two conditions indicate that the maximum χ_ac value and the optimal f_res of a 100 Å-thick CoFeB thin film were 1.6 and 30 Hz, respectively, following post-annealing at T_A=150 °C for 1 h, suggesting that a 100 Å-thick CoFeB thin film that has been post-annealed at T_A=150 °C can be utilized as a gage sensor and in transformer applications at low frequencies.     

Effect of UV lamp irradiation during oxidation of Zr/Pt/Si structure on electrical properties of Pt/ZrO2/Pt/Si structure

Metal-insulator-metal (MIM) capacitors were fabricated using ZrO₂ films and the effects of structural and native defects of the ZrO₂ films on the electrical and dielectric properties were investigated. For preparing ZrO₂ films, Zr films were deposited on Pt/Si substrates by ion beam deposition (IBD) system with/without substrate bias voltages and oxidized at 200 °C for 60 min under 0.1 MPa O₂ atmosphere with/without UV light irradiation (λ = 193 nm, Deep UV lamp). The ZrO₂(∼12 nm) films on Pt(∼100 nm)/Si were characterized by X-ray diffraction pattern (XRD), field emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy (HRTEM), capacitance-voltage (C-V) and current-voltage (I-V) measurements were carried out on MIM structures. ZrO₂ films, fabricated by oxidizing the Zr film deposited with substrate bias voltage under UV light irradiation, show the highest capacitance (784 pF) and the lowest leakage current density. The active oxygen species formed by UV irradiation are considered to play an important role in the reduction of the leakage current density, because they can reduce the density of oxygen vacancies.     

Metamagnetic transition and magnetocaloric effect in charge-ordered Pr0.68Ca0.32−xSrxMnO3 (x=0, 0.1, 0.18, 0.26 and 0.32) compounds

In this study, magnetic and magnetocaloric properties of Pr_0.68Ca_0.32−xSr_xMnO₃ (x=0, 0.1, 0.18, 0.26 and 0.32) compounds were investigated. X-ray results indicated that all the samples have a single phase of orthorhombic symmetry. The orthorhombic unit cell parameters increase with the increase in Sr content. Large negative magnetic entropy changes (−26.2 J/kg K at 38 K and 5 T for x=0 and −6.5 J/kg K at 83 K and 6 T for x=0.1) were attributed to ultrasharp metamagnetic transitions. The peak value of ΔS_m decreased from −4.1 J/kg K for x=0.18 sample to −2.4 J/kg K for x=0.32 at 1 T magnetic field.     

Study of ferromagnetism in Bi2S3 and ZnS nanocrystalline powders

Results of magnetic measurements suggested that Bi₂S₃ and ZnS nanocrystalline powders prepared by hydrothermal method could possibly exhibit room temperature ferromagnetism. The measured saturation magnetization of the powders increases with an increase of annealing temperature from 300 to 500 °C. Ab initio calculations suggested that the cation vacancies on the surface of Bi₂S₃ and ZnS nanograins could be responsible for the observed magnetic moments. Heat-treatment of Bi₂S₃ or ZnS nanocrystalline powders in Bi or Zn vapor could bring about an enhancement of ferromagnetism. The calculation results indicated that the interstitial Bi or Zn atoms in Bi₂S₃ (0 0 1) or ZnS (0 0 1) surface could induce magnetic moments.     

Structural and magnetic properties of evaporated Fe thin films on Si(1 1 1), Si(1 0 0) and glass substrates

We present experimental results on the structural and magnetic properties of series of Fe thin films evaporated onto Si(1 1 1), Si(1 0 0) and glass substrates. The Fe thickness, t, ranges from 6 to110 nm. X-ray diffraction (XRD) and atomic force microscopy (AFM) have been used to study the structure and surface morphology of these films. The magnetic properties were investigated by means of the Brillouin light scattering (BLS) and magnetic force microscopy (MFM) techniques. The Fe films grow with (1 1 0) texture; as t increases, this (1 1 0) texture becomes weaker for Fe/Si, while for Fe/glass, the texture changes from (1 1 0) to (2 1 1). Grains are larger in Fe/Si than in Fe/glass. The effective magnetization, 4πM_eff, inferred from BLS was found to be lower than the 4πM_S bulk value. Stress induced anisotropy might be in part responsible for this difference. MFM images reveal stripe domain structure for the 110 nm thick Fe/Si(1 0 0) only.     

Synthesis of Fe2O3 concentrations and sintering temperature on FTIR and magnetic susceptibility measured from 4 to 300 K of monolith silica gel prepared by sol–gel technique

Nano-crystalline ferric oxide was synthesized inside an amorphous silica matrix by the sol–gel method. The formation of ferric oxide can be detected, giving fine particles around 5–10 nm crystallite sizes calculated from win-fit program. This is associated with a specific role of the silica matrix, which facilitates the diffusion of the reacting cations, enhancing the ferric oxide formation. γ- to α- and/or ε-Fe₂O₃ transformations take place by increasing the Fe₂O₃ concentration for samples sintering at constant-heat treatment temperature. The dried monolith gel materials were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), as well as by scanning electron microscopy (SEM). The magnetic susceptibility at zero-field cooling (M_ZFC) of the prepared samples was evaluated using superconducting quantum interference device (SQUID) magnetometer in temperature range from 4 to 300 K at 1 T.     

Magnetic characterization and thermoelectric power of Ni1−yZny Cu0.3Fe1.7 O4; 0.0⩽y⩽0.6

Samples of Ni_1−yZn_yCu_0.3Fe_1.7O₄; 0.0?y?0.6 were prepared by the solid state reaction method. X-ray investigations were carried out in order to assure the formation of the samples in single spinel phase. The analysis of X-ray data shows that the unit cell parameter increases with increasing Zn concentration and ascribed to the variation of the predicted cation distribution. Seebeck coefficient measurements were performed to know the type of charge carriers participating in the conduction mechanism. The magnetic susceptibility for the prepared samples was measured using Faraday^’s method at different temperatures as a function of the magnetic field intensity. The magnetic parameters were calculated from the magnetic susceptibility data, in the temperature range (300–800 K) at three different magnetic field intensities of (1280, 1733 and 2160 Oe). The effective magnetic moment (μ_eff) showed that, the critical Zn content was y=0.2$y=0.2$.     

Well-confined Yb:GdVO4 laser waveguide formed by MeV C ion implantation

The planar waveguide in x-cut Yb:GdVO₄ crystal has been fabricated by 6.0 MeV carbon ion implantation with the fluence of 1 × 10¹⁴ ions/cm² at room temperature. The modes of the waveguide were measured by the prism-coupling method with the wavelength of 633 nm and 1539 nm, respectively. An enhanced ordinary refractive index region was formed with a width of about 4.0 μm beneath the sample surface to act as a waveguide structure. By performing a modal analysis on the observed transverse magnetic polarized modes, it was found that all the transverse magnetic polarized modes can be well-confined inside the waveguide. Strong Yb-related photoluminescence in Yb:GdVO₄ waveguide has been observed at room temperature, which reveals that it exhibits possible applications for integrated active photonic devices.     

Magnetic properties of strontium hexaferrite films prepared by pulsed laser deposition

The magnetic properties of strontium hexaferrite (SrFe₁₂O₁₉) films fabricated by pulsed laser deposition on the Si(100) substrate with Pt(111) underlayer have been studied as a function of film thickness (50–700 nm). X-ray diffraction patterns confirm that the films have c-axis perpendicular orientation. The coercivities in perpendicular direction are higher than those for in-plane direction which indicates the films have perpendicular magnetic anisotropy. The coercivity was found to decrease with increasing of thickness, due to the increasing of the grain size and relaxation in lattice strain. The 200 nm thick film exhibits hexagonal shape grains of 150 nm and optimum magnetic properties of M_s=298 emu/cm³ and H_c=2540 Oe.     

Observation of large magnetic resistance in weak magnetic fields using CuPt/SiO2/Si/SiO2/CuPt structure

The magnetoresistive effect of CuPt(8 nm)/SiO₂(5 nm)/Si(50,000 nm)/SiO₂(5 nm)/CuPt(8 nm) structure made by e-beam evaporation technique is studied in this work. Variation in magnetoresistance obtained by I-V measurements at 77 K and in the presence of less than 5 mT magnetic field applied in parallel to the surface is investigated. We have found that this structure exhibit large magnetoresistance in low magnetic fields (i.e. <5 mT). Our results also indicate that the variation in magnetoresistance in the presence of external magnetic field has oscillatory behavior and has the maximum value of 3295%. This structure due to its high sensitivity to low magnetic fields can also be used as an active element in magnetic field sensor devices.     

Magnetic properties and room-temperature magnetocaloric effect in the doped antipervoskite compounds Ga1−xAlxCMn3 (0≤x≤0.15)

We report the effects of Al doping on the structure, magnetic properties, and magnetocaloric effect of antiperovskite compounds Ga_1−xAl_xCMn₃ (0≤x≤0.15). Partial substitutions of Al for Ga enhance the Curie temperature (from 250 K for x=0.0 to 312 K for x=0.15) and the saturation magnetization. On increasing the doping level x, the maximum values of the magnetic entropy change (−ΔS_M) decreases while the temperature span of −ΔS_M vs. T plot broadens. Furthermore, the relative cooling power (RCP) is also studied. For 20 kOe, the RCP value tends to saturate at a high doping level (for x=0.12, 119 J/kg at 296 K). However, at 45 kOe, the RCP value increases quickly with increasing x (for x=0.15, 293 J/kg at 312 K). Considering the relatively large RCP and inexpensive raw materials, Ga_1−xAl_xCMn₃ may be alternative candidates for room-temperature magnetic refrigeration.     

Synthesis of magnetic and lightweight hollow microspheres/polyaniline/Fe3O4 composite in one-step method

After hollow microspheres (HM) were surface modified, a layer of electromagnetic polyaniline/Fe₃O₄ composite (PAN/Fe₃O₄) was successfully grafted onto the surface of the self-assembled monolayer coated HM, resulting in HM/PAN/Fe₃O₄ composites. In this approach, γ-aminopropyltriethoxy silane was adopted to form a well-coating monolayer with amino groups for the graft polymerization of aniline, which played an important role in fabricating the core-shell structure. FeCl₃ was used as the oxidant not only for aniline to form PAN, but also for FeCl₂ to prepare the magnets. The structure, morphologies, and magnetic properties of the as-prepared samples were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction and vibrating sample magnetometer. The results indicated that the HM/PAN/Fe₃O₄ composites possess low density (ρ < 1.0 g/cm³), controllable morphology, and good magnetic properties at room temperature (saturation magnetization Ms = 8.32 emu g⁻¹ and coercive force Hc ≈ 0).     

Influence of Ge on magnetic and structural properties of Joule-heated Co-based ribbons: Giant magnetoimpedance response

Studies of magnetic and structural properties of Fe_3.5Co_66.5Si_12−xGe_xB₁₈ (x=0, 3, and 6) soft magnetic ribbons obtained by melt-spinning were performed. The samples were submitted to Joule-heating treatments with different maximum current values (0.01, 0.05, 0.1, 0.2, and 0.8 A, respectively) with steps of 0.01 A and times by step of 1, 2, and 10 s). X-ray diffraction, temperature dependence of magnetization (for the as-quenched samples), coercivity and giant magnetoimpedance (GMI), measured at different frequencies (100, 500, and 900 kHz, respectively) were performed. All the samples crystallized at annealing currents higher than 0.4 A, which was consistent with the magnetic hardening of the material. Coercivities less than 1 A/m were obtained for the three samples between 0.1 and 0.2 A. Maximum value of GMI response was observed for the sample without Ge in the as-quenched state.