Partially selective methanolysis of sebacic units in biodegradable multicomponent copolyesters

The composition and molar masses of equimolar multicomponent copolyesters, obtained from 1,4-butandiol and mixtures of succinic, adipic, sebacic, and terephthalic acids were characterized by ¹³C NMR, size exclusion chromatography (SEC), matrix assisted laser desorption ionization-time of flight mass spectroscopy (MALDI-TOF-MS), and viscosimetry. These copolyesters were subjected to partial methanolysis, and the composition and sequence of the oligomers obtained in the methanolysis were determined by the analysis of their fast atom bombardment (FAB-MS) mass spectra. The comparison of the composition data obtained by FAB-MS and ¹³C NMR indicates that for copolymers containing sebacic units the methanolysis is a partially selective process, and that oligomers containing sebacic units accumulate in the residue.     

Synthesis and structure of biodegradable hexylene terephthalate-co-lactide copolyesters

To obtain a biodegradable polymer material with satisfactory thermal properties, higher elongation and modulus of elasticity, a new copolyester, poly(hexylene terephthalate-co-lactide) (PHTL), was synthesized via direct polycondensation from terephthaloyl dichloride, 1,6-hexanediol and oligo(lactic acid). The resulting copolyesters were characterized by proton nuclear magnetic resonance (¹H NMR), differential scanning calorimetry (DSC), thermogravimetry (TG) and wide-angle X-ray scattering (WAXS). By using the relative integral areas of the dyad peaks in ¹H NMR spectrum of copolyesters PHTL, the sequence lengths of the hexylene terephthalate and lactide units in the resultant copolyesters are 3.5 and 1.5, respectively. Compared to poly(hexylene terephthalate) (PHT), PHTL has lower T _m but higher T _g due to the incorporation of lactide unit into the main chains of copolyesters. The degradation test of copolyesters under a physiological condition shows that the degradability of PHTL is sped up due to incorporation of lactide segments.     

聚对苯二甲酸乙二酯(PET)/聚对乙酰氧基甲酸(PHB)共聚酯及同类共聚物序列分布表征的数学统计

由聚对苯二甲酸乙二酯(PET)和对-乙酰氧基苯甲酸制得的PET/PHB共聚酯代表了一类序列结构较一般二元共聚物复杂的共聚体系.在揭示了这类共聚物与序列分布有关的诸概率参数中只有一个是独立的之后,定义了参数B_q来描述此类共聚物的无规度.并指出,共聚物B_q=b时的序列分布,可以从一般二元共聚物无规度B=b时的序列结构加以推断.     

序列结构对液晶共聚酯性能的影响

本文通过熔融酯交换和Schottern-Baumann缩聚反应合成了两类组成相同而序列结构不同的基于对羟基苯甲酸、对苯二甲酸和二元酚的三元共聚酯,用热台偏光显微镜、DSC和X-射线衍射,较详细地研究了序列结构对液晶相类型、转变温度和固态结构等的影响。结果表明,无规共聚酯较规则共聚酯的熔化温度普遍降低;但序列结构的差异并不改变液晶相类型,规则共聚酯和无规共聚酯均为热致向列型液晶,两类共聚酯固态结构的差异可用结构单元的相似性进行解释。     

Synthesis and structural study of copolymers of l-lactic acid and bis(2-hydroxyethyl terephthalate)

Poly(ethylene terephthalate)-poly(lactic acid) (PET-PLLA) copolyesters were synthesized by the melt reaction of bis(2-hydroxyethyl terephthalate) (BHET) with l-lactic acid oligomers (OLLA) in the presence of SnCl₂, H₂O-p-toluene sulfonic acid, H₂O catalytic system. The ¹H and ¹³C NMR studies confirm the incorporation of lactate units in PET chains after reaction. Copolyesters containing nearly equimolar terephthalate/lactate ratio are not completely random and present some block-copolymer character, while the microstructure of PET-rich copolyesters is a random one. Due to a longer PET sequence length, the latter exhibit a melting point close to 210 °C while the other ones are amorphous. SEC/MALDI-TOF MS off-line coupling was used to obtain the absolute average molar masses of the copolyesters. The results indicate that the conventional polystyrene calibration method leads to a strong overestimation of PET-PLLA molar masses, while the determined by NMR is much closer to the SEC/MALDI value.     

Investigations of aromatic polyesters with polynaphthalene systems in the main chain—VI: NMR studies of the structure of the aromatic copolyesters

Nuclear magnetic resonance spectra of several kinds of terephthalic copolyesters of 4,4′dihydroxydinaphthyl 1,1′ and 2,2 bis(4-hydroxyphenyl) propane were recorded. Proton signals of the terephthalic acid unit corresponding to heterolinkages and homolinkages could be observed in the range from 8.23 to 8.53 ppm. The average sequence lengths and the degrees of randomness in the copolyesters were calculated from the intensities of these signals.     

PREPARATION AND PROPERTIES OF POLY （LACTIC ACID-CO-GLYCOL TEREPHTHALIC ACID） COPOLYESTER

To obtain a kind of biodegradable polymer material with satisfactory properties, a new biodegradable copolyester poly(lactic acid-co-glycol terephthalate) (PETA), was synthesized from three monomers of lactic acid, glycol and terephthalic acid. The resulting copolyesters, PETA, were characterized by FT-IR, 1H-NMR, DSC, TGA and by the ways of weight loss rate to characterize their biodegradability. The findings in this work indicated that, the TmS and TdS of copolyesters PETA increased with increasing contents of the terephthalic acid units. From the biodegradation tests in natural soil, boiling water, acid buffer solution and alkali buffer solution, it was shown that the biodegradability of copolyesters PETA decreased with increasing contents of the terephthalic acid units.     

Structural analysis of poly[(R,S)-3-hydroxybutyrate-co-L-lactide] copolyesters by electrospray ionization ion trap mass spectrometry

Two random copolyesters of poly[(R,S)-3-hydroxybutyrate-co-L-lactide] (P[(R,S)-3HB-co-LA]), prepared by equimolar reaction of (R,S)-beta-butyrolactone with L-lactic acid and (R,S)-3-hydroxybutyric acid with L-lactide, respectively, were characterized by electrospray ionization ion trap mass spectrometry (ESI-ITMS). Detailed studies of these copolyesters were performed by means of collision-induced dissociation (CID). The molecular architecture of individual copolyester macromolecules, including chemical structures of their end groups (hydroxyl and carboxylate), were established on the basis of their ESI mass spectra. The influence of an intermolecular transesterification reaction on the microstructure of the copolyester synthesized by equimolar reaction of (R,S)-3-hydroxybutyric acid with L-lactide was observed. The mass spectra provided information on sequence distribution and indicated that, despite the synthetic pathway applied, random P[(R,S)-3HB-co-LA] copolyesters were formed predominantly. The arrangements of comonomer structural units along the copolyester chains were evaluated by the respective ESI-MS/MS fragmentation pathways.     

Poly(ethylene terephthalate) copolymers containing nitroterephthalic units. I. Synthesis and characterization

The synthesis, microstructure, and thermal behavior of a series of poly(ethylene terephthalate) (PET) copolymers containing nitroterephthalic units are described. These novel copolyesters were synthesized by transesterification followed by melt copolycondensation of dimethyl terephthalate and dimethyl nitroterephthalate mixtures with ethylene glycol. The molar ratio of the two comonomers in the feed varied from 95/5 to 25/75. Furthermore, PET and poly(ethylene nitroterephthalate) homopolymers were synthesized with the same method and comparatively studied. Copolyester compositions were practically the same as in the feed, and weight‐average molecular weights ranged from 10,000 to 60,000. The two monomeric units were randomly distributed along the polymer chain, and the experimentally determined average sequence lengths were in accordance with ideal copolycondensation statistics. Melting temperatures and enthalpies of the copolyesters decreased with increasing content in nitroterephthalic units, and they all showed a single glass‐transition temperature superior to that of PET. They appeared to be stable up to 300 °C, and thermal degradation occurred in two well‐differentiated steps. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3761–3770, 2000     

Characterization of polyesters by matrix-assisted laser desorption/ionization and Fourier transform mass spectrometry

Two homopolyesters, poly(neopentyl glycol-alt-isophthalic acid) and poly(hexanediol-alt-azelaic acid), and two copolyesters, poly(dipropoxylated bisphenol-A-alt-(isophthalic acid-co-adipic acid)) and poly(neopentyl glycol-alt-(adipic acid-co-isophthalic acid)) were analyzed by internal source matrix assisted laser desorption/ionization Fourier transform mass spectrometry (MALDI-FTMS). The high resolution and high mass accuracy provided by FTMS greatly facilitate the characterization of the polyester and copolyester samples. Isobaric resolution allows the ion abundances of overlapping isotopic envelopes to be assessed. Repeat units were confirmed and end functionality assigned. Single shot mass spectra of the entire polymeric distribution demonstrate that the dynamic range of this internal MALDI source instrument and the analyzer cell exceeds performance of those previously reported for higher field instruments. Corrections of space charge mass shift effects are demonstrated for the analytes using an external calibrant and (subsequent to confirmation of structure) via internal calibration which removes ambiguity due to space charge differences in calibrant and analyte spectra. Capillary gel permeation chromatography was used to prepare low polydispersity samples from a high polydispersity polyester, improving the measurement of molecular weight distribution two-fold while retaining the benefits of high resolution mass spectrometry for elucidation of oligomer identity.     

PREPARATION AND PROPERTIES OF POLY(LACTIC ACID-CO-GLYCOL TEREPHTHALIC ACID)COPOLYESTER

1. INTRODUCTIONThe amount of industrial and municipal waste has been increasing all over the world. Therefore, the design and development of materials capable of being degraded into safe components under specific environmental conditions have become incre…     

聚对苯二甲酸乙二酯(PET)/聚对乙酰氧基甲酸(PHB)共聚酯及同类共聚物序列分布表征的数学统计

 由聚对苯二甲酸乙二酯(PET)和对-乙酰氧基苯甲酸制得的PET/PHB共聚酯代表了一类序列结构较一般二元共聚物复杂的共聚体系.在揭示了这类共聚物与序列分布有关的诸概率参数中只有一个是独立的之后,定义了参数B_q来描述此类共聚物的无规度.并指出,共聚物B_q=b时的序列分布,可以从一般二元共聚物无规度B=b时的序列结构加以推断.     

Butylene copolyesters based on aldaric and terephthalic acids. Synthesis and characterization

The synthesis, characterization, and some properties of new copolyesters analogous to poly(butylene terephthalate) (PBT), based on L ‐arabinaric and galactaric acids, are described. These copolyesters were obtained by polycondensation reaction in the melt of mixtures of methyl 2,3,4‐tri‐O‐methyl‐L ‐arabinarate or methyl 2,3,4,5‐tetra‐O‐methyl‐galactarate and dimethyl terephthalate with 1,4‐butanediol. Their weight‐average molecular weights ranged between 10,000 and 34,000, with polydispersities ranging from 1.4 to 2.2. The composition of all the copolymers was analyzed by NMR, and was found to have a statistical microstructure. All these copolyesters were thermally stable, with degradation temperatures well above 300 °C. The melting temperature and crystallinity decreased in both series, and the glass transition temperature increased and decreased respectively, for the PBTGa and PBTAr series with increasing amounts of aldaric units in the copolyester chain. Only PBT‐derived copolyesters containing a maximum of 30% aldaric units showed discrete scattering characteristic of crystalline material. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1168–1177, 2009     

Polyesters analogous to PET and PBT based on O‐benzyl ethers of xylitol and L‐arabinitol

The synthesis, characterization, and some properties of new copolyesters of poly(butylene terephthalate) (PBT) and poly(ethylene terephthalate) (PET) based on L ‐arabinitol and xylitol are described. These copolyesters were obtained by polycondensation reaction in the melt of mixtures of 1,4‐butanediol or ethylene glycol and 2,3,4‐tri‐O‐benzyl‐L ‐arabinitol or 2,3,4‐tri‐O‐benzyl‐xylitol with dimethyl terephthalate. Their weight‐average molecular weights ranged between 7000 and 55,000, with polydispersities ranging from 1.4 to 4.7. Copolymers containing 1,4‐butanediol could be analyzed by NMR, and were found to have a statistical microstructure. All these copolyesters were thermally stable, with degradation temperatures well above 300 °C. With increasing amounts of alditol in the copolyester, the melting temperature and crystallinity decreased in both series, and the glass transition temperature increased for the PBT series and decreased for the PET series. Only PBT‐derived copolyesters containing a maximum of 10% alditol units showed discrete scattering characteristic of crystalline material. No substantial differences in either structure or properties were observed between the L ‐arabinitol and xylitol copolyester series. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5167–5179, 2008     

New polymer syntheses. CIX. Biodegradable,alternating copolyesters of terephthalic acid,aliphatic dicarboxylic acids,and alkane diols

Copolyesters with an alternating sequence of terephthalic acid and aliphatic dicarboxylic acids were prepared with three different methods. First, dicarboxylic acid dichlorides were reacted with bis(2‐hydroxyethyl)terephthalate (BHET) in refluxing 1,2‐dichlorobenzene. Second, the same monomers were polycondensed at 0–20 °C in the presence of pyridine. Third, dicarboxylic acid dichlorides and silylated BHET were polycondensed in bulk. Only this third method gave satisfactory molecular weights. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry revealed that the copolyesters prepared by the pyridine and silyl methods might have contained considerable fractions of cyclic oligoesters and polyesters despite the absence of transesterification and backbiting processes. The alternating sequences and thermal properties were characterized with ¹H NMR spectroscopy and differential scanning calorimetry measurements, respectively. In agreement with the alternating sequence, all copolyesters proved to be crystalline, but the crystallization was extremely slow [slower than that of poly(ethylene terephthalate)]. A second series of alternating copolyesters was prepared by the polycondensation of silylated bis(4‐hydroxybut‐ yl)terephthalate with various aliphatic dicarboxylic acid dichlorides. The resulting copolyesters showed significantly higher rates of crystallization, and the melting temperatures were higher than those of the BHET‐based copolyesters. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3371–3382, 2001     

Crystallization behavior and spherulite morphology of hard and soft segments in butylene terephthalate–ϵ‐caprolactone copolyesters

The crystallization behaviors and spherulite morphology of a series of butylene terephthalate–ϵ‐caprolactone (BCL) copolyesters were explored with differential scanning calorimetry, polarized light microscopy, and wide‐angle X‐ray diffraction. The crystallization characteristics reflecting the segmented properties of BCL copolyesters are discussed. For BCL copolyesters with low or high hard‐segment contents, the ϵ‐caprolactone segments or butylene terephthalate segments are long enough to crystallize and even grow spherulites under appropriate conditions, and the crystallizability strengthens with increases in the corresponding segment sequence length. In BCL copolyesters, the crystallization of the soft segments requires a considerably long sequence length, whereas the hard segments even containing only one structural unit can still crystallize and even grow spherulites. The hard segments can grow the usual spherulites at a higher temperature like the poly(butylene terephthalate) homopolymer. The crystallizabilities of hard segments and soft segments for BCL and ethylene terephthalate–ϵ‐caprolactone copolyesters are compared and discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 634–644, 2001     

The determination of randomness in copolyesters by high resolution nuclear magnetic resonance

High-resolution nuclear magnetic resonance (NMR) spectra of several kinds of polyesters were measured. Proton signals due to heterolinkages could be observed in some copolyesters, and the average sequence length and the degree of randomness in the copolyester were calculated from the intensities of their signals. A process in the transesterification reaction between two kinds of homopolyester was pursued with the NMR spectra. Random copolyester is formed by the ordinary molten-state copolycondensation and also during the transesterification reaction between two kinds of homopolyester.     

Synthesis and characterization of fully aromatic thermotropic liquid‐crystalline copolyesters containing m‐hydroxybenzoic acid units

A series of fully aromatic copolyesters based on p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA), terephthalic acid (TPA), and m‐acetoxybenzoic acid (m‐ABA) were prepared by a modified melt‐polycondensation reaction. The copolyesters were characterized by DSC, thermogravimetric analysis, ¹H NMR, polarized optical microscopy, X‐ray diffraction, and intrinsic viscosity measurements. The copolyesters exhibited nematic liquid‐crystalline phases in a broad temperature range of about 150 °C, when the content of linear (p‐ABA, HQDA, and TPA) units was over 67 mol %. DSC analysis of the anisotropic copolyesters revealed broad endotherms associated with the nematic phases, and the melting or flow temperatures were found to be in the processable region. The flow temperatures and crystal‐to‐nematic and nematic‐to‐isotropic transitions depend on the type of linear monomer units, and these transitions increased as the content of the p‐ABA units increased, as compared to the HQDA/TPA units. When the content of the p‐ABA units increased, as compared to other linear units (HQDA and TPA), the intrinsic viscosity and degree of crystallinity of the copolyesters also increased, implying a higher reactivity for p‐ABA in the p‐ABA/HQDA/TPA/m‐ABA polymer system. The aromatic region in the ¹H NMR spectra of the copolyesters containing equal molar compositions of p‐ABA, HQDA, and TPA units were sensitive to the sequence distribution of aromatic rings. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3263–3277, 2001     

Poly(ethylene‐co‐1,4‐cyclohexylenedimethylene terephthalate) copolyesters obtained by ring opening polymerization

Cyclic oligomer fractions of ethylene terephthalate c(ET)_n and 1,4‐cyclohexylenedimethylene terephthalate c(CT)_n were obtained by cyclodepolymerization of their respective polyesters, the former containing around 80 mol % of trimer and the latter with around 70 mol % of trimer to pentamer. Mixtures of these fractions at selected compositions were subjected to ring opening copolymerization to give a series of poly(ethylene‐co‐cyclohexylenedimethylene terephthalate) copolyesters with ET/CT comonomer ratios ranging from 90/10 to 10/90. The copolyesters were characterized by GPC and NMR, and their thermal properties were evaluated by DSC and TGA. They had essentially the same composition as the feed from which they were produced and had an average‐weight molecular weights between 30,000 and 40,000 g/mol with polydispersities between 2 and 2.7. The distribution of the monomeric units in these copolyesters was essentially at random although it evolved to be a blocky microstructure as the contents in the two comonomers became more dissimilar. Their thermal behavior was the expected one for these types of copolyesters with crystallinity and heating stability decreasing with the content in CT units. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5954–5966, 2009     

Synthesis,characterization, and enzymatic degradation of network aliphatic copolyesters

Network copolyesters were prepared from glycerol (Yg) and sebacic acid (10) with 10–90 mol % of either succinic acid (4), 1,12-dodecanedicarboxylic acid (14), 1,18-octadecanedicarboxylic acid (20), or terephthalic acid (T). Prepolymers prepared by melt-polycondensation were cast from dimethylformamide solution and postpolymerized at 230–250°C for various periods of time to form a network. The resultant films were transparent, flexible, and insoluble in organic solvents. The network copolyesters obtained were characterized by infrared absorption spectra, wide angle X-ray diffraction analysis, density measurement, thermomechanical analysis, differential scanning calorimetry, and tensile test. The enzymatic degradation was estimated by weight loss of the network copolyester films in a buffer solution with Rhizopus delemar lipase at 37°C. The weight loss due to the enzymatic degradation was decreased with increasing comonomer content, and the copolyesters with Yg4, Yg20 and YgT more than 50 mol % were not degraded by lipase enzyme at all. On the contrary, Yg-10/14 films were degraded appreciably over whole range of comonomer composition. With increasing comonomer content, the heat distortion temperature increased gradually, while the tensile strength and Young's modulus were not changed much. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2005–2011, 1999