掺硼金刚石电极电催化氧化酚类有机物的取代基效应

本文主要以当前水环境中存在酚类有机污染物为研究对象,探讨酚类有机污染物在掺硼金刚石(BDD)电极上的取代基效应,具体研究具有不同位置及种类官能团的取代酚类有机污染物在BDD电极上的电催化氧化过程,通过化学需氧量和浓度变化考察有机污染物在电催化降解过程中的降解趋势,深入分析电极种类、官能团位置与种类与电催化氧化活性之间的联系的同时,研究阳极材料电催化氧化有机污染物的机理及动力学。结果表明,有机物在电极表面的电催化过程以电产生羟基自由基为媒介,对苯二酚在不同电极上的电催化活性与电极析氧电位及表面产生羟基自由基量有着重要的联系,BDD电极拥有最强的电催化氧化活性;不同取代基团的对位取代酚在BDD电极上的电化学降解实验显示电催化反应速率受取代官能团自身的电子效应制约,有机物矿化过程中羟基自由基首先进攻苯环的对位发生取代反应,同时取代基脱离苯环过程成为整个取代酚类电化学降解过程的决速步骤,且有机物的电催化反应速率与取代基特征Hammett常数σ呈近似线性关系。     

The reversible electrodeposition of trace metal ions from multi-ligand systems: Part II. Calculations on the electrochemical availability of lead at trace levels in seawater

A general method for calculating the electrochemical availability of a trace metal in a multi-ligand system is illustrated by calculations on lead in artificial seawater. The procedure adopted assumes that the metal is accumulated at a mercury-coated rotating disc electrode during the plating process by the reversible reduction of metal ions. Although uncertainties in the rate constants and stability constants employed prevent the model from being used predictively, qualitative relationships between chemical speciation and electrochemical availability are discussed. The sensitivity of the calculated electrochemical availability to uncertainties in the stability constants and rate constants and variations in diffussion layer thickness and pH is considered in some detail. The results of the calculations are used to formulate recommendations for the electrochemical analysis of untreated natural samples.     

席夫碱自组装单分子膜的电化学行为

利用自组装技术将席夫碱硫醇衍生物在金表面形成自组装单分子膜,并初步研究了此自组装单分子膜的电化学行为,发现该席夫碱分子在0.1 mol•L－1的KCl溶液中具有电化学不可逆氧化还原行为，且随着自组装时间的增加表观电极反应速率常数值显著减小,最后减小为0,并对此进行了解释.     

硫代硫酸盐在铂电极上的电化学氧化行为

用循环伏安法测定了硫代硫酸盐在铂电极上的电化学氧化行为, 结果表明, 其电化学氧化行为与体系的pH和扫描速度密切相关. 当pH为5~6时, 硫代硫酸盐的循环伏安曲线出现三个氧化峰, 峰电位分别在0.05 V、0.58 V和1.02 V附近, 随pH值升高和扫描速度的降低, 0.05 V附近的氧化峰逐渐变得明显, 同时各氧化峰的峰电位与扫描速度的对数, 峰电流与扫描速度的平方根均成很好的线性关系；当pH为8~9时, 硫代硫酸盐的循环伏安曲线出现三个明显的氧化峰, 峰电位分别在0.05 V、0.91 V和1.22 V附近. 随扫描速度降低, 循环伏安曲线出现交叉, 体系呈现明显的电化学振荡行为；但当pH=10时, 1.22 V附近的氧化峰消失. 硫代硫酸盐的电化学氧化行为非常复杂, 电化学氧化机制随体系pH的变化而变化.     

肾上腺素电化学氧化生成肾上腺素红反应机理的薄层光谱电化学研究

应用长光程薄层电解池(石墨电极和铂片电极),使用循环伏安法(CV)和单电位阶跃计时吸收法(SPS/CA),研究了肾上腺在pH=2.5～7.0的McIlvaine缓冲溶液中电氧化生成肾上腺素红的反应机理,测定了表观速率常数kobs.结果表明:溶液pH值对肾上腺素的电氧化反应有很大影响,肾上腺素生成肾上腺素红的kobs随溶液pH值的增加而增大.     

静电纺聚偏氟乙烯@硅藻土锂离子电池隔膜的制备及性能

以聚偏氟乙烯(PVDF)和硅藻土为原料,通过静电纺丝法制备PVDF@硅藻土复合纤维膜,用于锂离子电池隔膜。 研究了隔膜的吸液率、热稳定性和电化学性能等。 添加硅藻土可有效提高复合膜的电解液吸收率和电化学性能,其中吸液率可达623.6%,相比于PVDF膜和聚丙烯(PP)膜具有优异的循环性能和倍率性能。     

Kinetics of electrochemical nucleation and growth

A united scheme for the kinetics of electrochemical nucleation and the growth of a new phase is presented. The peculiarities of ion-transfer kinetics during electrochemical phase formation are analysed. The influence of the exchange current density at the electrolyte/cluster of the new phase interface on the nucleation rate, the nucleation induction time and the growth rate is reported.     

Fabrication and Characterization of a Thin-Layer Electrochemical Flow Cell and Its Application for Flow Analysis

The design and fabrication of a home-made thin-layer electrochemical flow cell are reported. The performance and electrochemical characteristics of thin-layer cells are evaluated in terms of flow rate and channel thickness. The adaptability of the flow cell for amperometric and electrochemiluminescence measurements is demonstrated. Also, a flow injection method comprising electrochemical generation followed by spectrophotometric detection is proposed for determination of bromide using the fabricated cell. The influence of chemical, electrochemical, and flow parameters on the absorbance and current signals are investigated, and under optimized conditions, the analytical features of the proposed method with respect to bromide detection are evaluated.     

An experimental and theoretical study of interactions between unlike surface anions and increases in the rate of electrochemical reactions

Experimental and theoretical results are presented on increases in the rate of electrochemical reactions, which are achieved by replacing a small fraction of the original anions in solution with more inhibiting ones. The rate of the electrochemical oxidation of formic acid was substantially increased by replacing a small amount of the supporting electrolyte, perchloric acid, with either sulfuric acid or tetrafluoroboric acid. The largest increases were achieved by substituting mixtures of the last two acids. A theoretical analysis of an electrochemical reaction coupled to anion adsorption is presented. The analysis reveals that, if repulsive forces of appropriate strength form between unlike surface anions, replacing a fraction of the original anions in solution with one or two kinds of more inhibiting anions can increase the rate of reaction.     

Evidence for the occurrence of electrochemical reactions and their interaction with chemical reactions during the corrosion of pure Fe with solid NaCl deposit in water vapor at 600 °C

The results of this work prove that electrochemical reactions are involved in the whole corrosion process of pure Fe with a solid NaCl deposit in water vapor at 600 °C. The interaction of chemical and electrochemical reactions accelerates the corrosion rate of pure Fe significantly. The electrochemical reaction is coupled with a preceding chemical reaction process (ce), in which Fe first reacts chemically with NaCl and water vapor to generate HCl_(g). And then, the electrochemical reaction proceeds via a one-electron electrochemical reduction to form H₂.     

抗坏血酸在铂纳米粒子/碳纳米管/聚吡咯复合修饰电极上的电化学行为

研究了抗坏血酸在铂纳米粒子/碳纳米管/聚吡咯复合膜修饰电极上的电化学行为,发现复合修饰电极对抗坏血酸的电化学反应具有较好的电催化作用,与空白电极相比电化学氧化电流增加了7倍。用电化学阻抗谱研究了电子在修饰电极界面上的传输过程,发现修饰电极的电催化性能与修饰电极可以提高界面电子传输能力是相关的。同时研究了碳纳米管用量、支持电解质、扫速、电沉积条件等因素对抗坏血酸在修饰电极上电化学行为的影响。     

酞菁类化合物对MH/Ni电池性能的影响

针对MH/Ni电池充电过程中氧的产生和不恰当的消除方式带来的内压升高和热量聚集使电池总体性能衰减很快的问题, 提出采用降低化学催化氧还原的比例, 提高热量产生少的电催化氧还原比例的方法加以解决.金属酞菁类化合物是一种电催化氧还原剂.添加酞菁的MH/Ni电池与对比电池进行容量衰减、内压、大电流放电等特性比较, 其性能均有显著提高.     

ELECTROCHEMICAL GENERATION OF SOLUTION LUMINESCENCE—III.: EFFECT OF OXYGEN ON QUANTUM YIELD AND KINETICS OF LUMINOL

Abstract -The growth and decay of light emission were examined for luminol as a funtion of oxygen concentration in aqueous alkaline solutions during and after the application of a controlled potential, square-wave electrochemical pulse. The results indicate that, in the rise portion of the light, the rate of electrochemical oxidation of luminol governs the light emission rate; while in the decay portion, the rate is first order and is independent of oxygen concentration. Quantum yields based on integration of the total light emitted also appear to be independent of oxygen above a threshold value. These results are consistent with evidence that the emitting state is an excited singlet.     

操作条件对DMFC阴极电化学阻抗谱参数的影响

通过降低阴极催化剂载量强化了阴极氧还原反应的电化学极化, 测量了不同操作条件下直接甲醇燃料电池(DMFC)的极化曲线和交流阻抗谱,并提出了改进的等效电路模型LR(CR)(QR(LR))用以分析温度、空气流量和甲醇流量对DMFC阴极电化学反应和传质极化过程的影响. 研究结果表明, 提高工作温度会导致更多的甲醇渗透到阴极, 加大阴极氧气还原反应的电荷转移电阻; 只有采用大的空气流量,才会有效地防止水淹, 加大氧气向催化剂层的传质, 促进阴极反应的进行; 适当提高甲醇的流量可以促进阳极和阴极电化学反应的进行, 但是过高的甲醇流速可能会降低电极表面的温度, 加剧甲醇的渗透.     

苯酚在含氯体系中的电化学氧化

以Ru-Ir/Ti三元电极作阳极电解处理苯酚废水,研究废水中Cl-初始浓度对处理效果的影响.结果表明,在一定的电解时间内,苯酚的电化学氧化符合一级动力学方程;废水中Cl-的初始浓度越大,苯酚完全被氧化所需的时间也越短,即其表观速率常数越大.苯酚在Cl-体系中降解的中间产物主要有4-氯苯酚,1-氯苯酚,2,4-二氯苯酚,2,6二氯苯酚,2,4,6-三氯苯酚及各种短链脂肪酸和氯代醇等;最终产物是CO2、CHCl2和CHCl3.电解中间体的生成和降解速率随废水中Cl-初始浓度的增加而增大.据此,导出苯酚在含Cl-体系中电化学氧化的反应途径.     

Pd/Mm(富铈稀土)薄膜电极在KOH溶液中的电化学行为

利用磁控溅射法制备了Pd/Mm(Mischmetal)混合稀土薄膜,采用X射线衍射、AFM及循环伏安和交流阻抗谱等电化学测试技术研究了Pd/Mm稀土薄膜的晶体结构、表面形貌及其在KOH溶液中的电化学行为.结果表明,Pd/Mm薄膜表面的Pd层由纳米级的孤岛状颗粒构成,颗粒大小为100～200 nm.循环伏安法研究表明,氢的电化学氧化和还原均通过表面Pd金属层进行.Pd/Mm稀土薄膜电极的交流阻抗图由两个容抗弧组成,低频区的容抗弧对应氢在电极中的固态扩散过程,而高频段的容抗弧对应氢在电极表面的电化学还原过程,其中氢在薄膜电极内部的扩散是速率控制步骤.     

pH/Cl-复合探针技术对钢筋混凝土电化学除氯的原位检测

采用恒电流法电化学除氯处理受氯离子污染的钢筋混凝土试样,并用pH/Cl^-复合探针原位检测电化学除氯过程钢筋混凝土不同位置孔隙液的氯离子含量与pH值分布,同时用线性极化曲线和交流阻抗谱图等电化学技术考察钢筋的腐蚀性能,探讨电化学除氯过程的混凝土微环境和钢筋腐蚀速率. 研究结果表明：在电化学除氯过程,混凝土孔隙液的氯离子浓度逐降,而pH值在初期略有升高,随之其pH值略降;电化学除氯施加的阴极电流,使钢筋处于阴极极化状态而得到保护;除氯停止（即退极化）后钢筋的腐蚀电位明显正移,腐蚀电流降低,极化电阻升高,表明电化学除氯能改善钢筋的腐蚀环境,降低钢筋的腐蚀速率.     

混合金属氧化物阳极在海水中的电化学性能

采用热分解方法制备钛基混合金属氧化物阳极 ,用扫描电镜对阳极涂层显微形貌进行了分析 ,并通过实海模拟试验考察了混合金属氧化物阳极在海水阴极保护系统中的使用性能 .SEM分析结果表明 ,混合金属氧化物阳极涂层呈多孔多裂纹的显微结构 ,与其它阳极材料相比 ,此种阳极具有更大的活性表面积 .电化学试验结果表明 ,混合金属氧化物阳极在海水中具有良好的电化学稳定性和电化学活性 ;此外 ,混合金属氧化物阳极在海水中的消耗率很低 ,属于不溶性的阳极材料 ,作为外加电流阴极保护的辅助阳极具有广泛的应用前景     

Layer-by-layer assembly of silicotungstate multilayer films modified on glassy carbon electrode and their electrochemical behaviors

A new electrode was modified by multilayer films composed of heteropolyanion (SiW12) and cationic polymer poly(diallyldimethylammonium chloride) through electrochemical growth. The modified electrode electrochemical behavior, the effect of solution pH and electrocatalytic response to the reduction of BrO3- and NO2- have been investigated. The result shows that the electrochemical process of multilayer films modified electrode including SiW12 is a reversible process by electrochemical step. One-electron process has no proton participation in the first step, and one-electron process is accompanied by one proton participation in the second step and two-electron process is accompanied by two protons participation in the third step. The films grow uniformly, and the peak currents increase with increasing layer numbers. The peak currents increase with scan rate, and the reduced potentials of multilayer films shift negatively with increasing pH. The electrochemical mechanism of multilayer films was suggested.