2-甲基-4-羟基-6-苯基嘧啶和2-甲基-4-羟基-5-溴-6-苯基嘧啶的高效液相色谱法分离测定

采用ODS-C18色谱柱和紫外检测器,对2-甲基-4-羟基-6-苯基嘧啶和2-甲基-4-羟基-5-溴-6-苯基嘧啶的含量进行HPLC分离测定.以甲醇水=4555为流动相,紫外检测波长为237 nm,样品线性范围为0.001～0.1 mg/mL.2-甲基-4-羟基-6-苯基嘧啶的RSD为0.5%;2-甲基-4-羟基-5-溴-6-苯基嘧啶的RSD为1.0%.     

2-甲氧基-3-氟-4-碘吡啶的合成

2-甲氧基-3-氟-4-碘吡啶是一个重要的医药化工中间体,其合成路线未见文献报道。以2-甲氧基-3-氟-5-氯吡啶为起始原料,经氢解和碘代两步反应合成标题化合物,总收率62.8%,其结构经¹H NMR, ¹³C NMR和MS确证。     

4-甲基-苯磺酸-2-氧-2-[3-(5-芳基-[1,3,4]噁二唑-2-基)-硫脲]-乙基酯的合成及生物活性研究

合成了12个未见文献报道的4-甲基-苯磺酸2-氧-2-[3-(5-芳基-[1,3,4]噁二唑-2-基)-硫脲]-乙基酯, 其结构经元素分析、¹H NMR和IR确证. 初步活性测试结果表明: 部分化合物有较好的杀菌活性.     

卤代-2-(3-甲基-5-取代-4H-1,2,4-三唑-4-基)-苯甲酸的合成

邻氮基苯甲酸;缩合反应;卤代-2-(3-甲基-5-取代-4H-1;2;4-三唑-4-基)-苯甲酸的合成     

稳定烯醇结构3-氯-2-羟基-4-羰基-4-对甲苯基-2-丁烯酸乙酯的合成

以甲苯为起始原料,通过傅克-酰基化、Aldol反应合成了具有稳定烯醇结构的3-氯-2-羟基-4-羰基-4-对甲苯基-2-丁烯酸乙酯,反应过程生成了中间体3,3-二氯-2-羟基-4-羰基-4-对甲苯基丁酸乙酯,采用红外、核磁共振谱、HRMS产品进行了测定和结构表征。对反应机理进行了初步探讨。     

(±)-12-乙基-13-甲氧基-8,11,13-罗汉松三烯-7-酮和(±)-12-乙基-13-甲氧基-8,11,13-罗汉松三烯的全合成

以α-环柠檬醛(1)为A环合成子,以季盐(2)为C环合成子,经缩合及分子内环化反应得到关键中间体(5).为引入乙基,进行了Friedel-Crafts反应和脱氧反应等,共经7步反应得到了(±)-12-乙基-13-甲氧基-8,11,13-罗汉松三烯-7-酮[(±)-nimbonone](9)及(±)-12-乙基-13-甲氧基-8,11,13-罗汉松三烯(10).     

3-甲基-1-戊烯-4-炔-3-醇的合成

以甲基乙烯酮为原料,用乙炔基格氏试剂对其加成,然后水解得到目标物3-甲基-1-戊烯-4-炔-3-醇。研究了温度对反应的影响,发现在25℃的反应温度下,目标化合物的气相色谱产率为50%,减压蒸馏纯化后收率为30%。目标产物用1HNMR、IR进行了表征。     

2-烷基氨基-3-芳基-5-苄基-1-咪唑啉-4-酮的合成及杀菌活性

咪唑啉酮衍生物;反应;2-烷基氨基-3-芳基-5-苄基-1-咪唑啉-4-酮的合成及杀菌活性     

3-甲基-2-戊烯-4-炔醛的合成新方法

化合物3-甲基-2-戊烯-4-炔-1-醛两端均为活性官能团,在分子连接及成环反应中能够起到非常重要的作用,是合成轮烯酮[1-7],脱落酸[8]和二苯基二苯并环辛烯[9]等的重要中间体.     

(3E)-胆甾-4-烯-3,6-二酮-3-肟和(6E)-胆甾-4-烯-3,6-二酮-6-肟的1D-NMR谱学特征及构象分析

采用1H和13C NMR对海绵中存在的同分异构体(6E)-胆甾-4-烯-3,6-二酮-6-肟(1)和(3E)-胆甾-4-烯-3,6-二酮-3-肟(2)进行结构分析,表征了它们在1H和13C NMR波谱中H2～H7及C2～C7之问的谱学差别,并对造成这种差别的原因进行了分析,同时对这两种位置异构体进行了构象分析和结构区分.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.